Small Group Tutorials

Here to help students catch up, keep up, and move ahead. Book a consultation here.

Top 100 Secondary 3 G2 Vocabulary List for Punggol | Motion, Forces and Energy

Three students sit around open books and worksheets at a classroom table, reading, writing and discussing the work together.

This Top 100 Secondary 3 G2 Vocabulary List for Punggol teaches the language of motion, forces and energy. Use it to distinguish mass from weight, read motion graphs and connect forces to changes in velocity. Each term has a plain meaning and original example, followed by worked cases, practice answers and a study plan.

Start with the group matching your school chapter. Explain an example aloud, change one quantity and predict the result before calculating. Parents can ask, “Which object are we studying?” and “What do the units tell us?” Work through one group at a time, using these questions to identify the next learning step.

  • For Punggol families: vocabulary for mechanics learning and revision.
  • Subject scope: the Physics component of G2 Science, with measurement, motion, forces, pressure and energy.
  • Teaching selection: exactly 100 terms in ten groups; this is an optional eduKate selection, not a prescribed SEAB list or official ranking.
  • Useful checks: identify the object, choose the quantity, preserve direction and give the correct unit.
  • Next step: use the worked cases and practice to find the particular idea that needs attention.

Contents

Scope, measurement, motion and forces — chapters 1–6
  1. Choose the right scope and school chapter
  2. Make each word perform a useful job
  3. Words 1–10: measuring with meaning
  4. Words 11–20: describing where and how an object moves
  5. Words 21–30: reading acceleration and graphs
  6. Words 31–40: identifying the forces
Dynamics, quantities and energy — chapters 7–12
  1. Words 41–50: connecting forces to changes in motion
  2. Words 51–60: mass, gravity and density
  3. Words 61–70: pressure, units and proportional reasoning
  4. Words 71–80: identifying energy stores
  5. Words 81–90: tracking work and energy transfers
  6. Words 91–100: explaining power and judging a result
Worked cases, practice and support — chapters 13–18
  1. Four worked cases: connect the words to a complete solution
  2. Ten practice questions with explained answers
  3. Find the error before adding more questions
  4. A manageable two-week practice plan
  5. How parents and a small group can support the learning
  6. Official references and related reading

CHAPTER 1 OF 18

1. Choose the right scope and school chapter

Back to contents

The 2027 G2 Science syllabus, Physics pages 9–14, provides the reference for this guide’s measurement and mechanics focus. The SEAB G2 subject index identifies K223 as Science (Physics, Chemistry) and K224 as Science (Physics, Biology). This Physics guide is relevant to either combination. K225 is Science (Chemistry, Biology) and has no Physics component. The shared document’s filename does not mean every section applies to every combination.

G2 is a subject level within the Secondary Education Certificate framework, not a description of a student’s overall ability. The 2027 document is a reference year; not every Secondary 3 reader will sit that year’s examination. Confirm your eventual examination-year syllabus and school teaching sequence.

Repair measurement foundations whenever needed; match other groups to current or later lessons. This guide develops mechanics beyond our general G2 Science vocabulary guide. Use it alongside school notes and the rest of the Science course.

Contents · Next chapter

CHAPTER 2 OF 18

2. Make each word perform a useful job

Back to contents

Record each term’s meaning, a situation where it applies and a nearby term it can be confused with. Pair weight with mass, speed with velocity, and energy with power. Explain each difference using the same situation.

Write the relationship before inserting numbers, convert units and check whether the result fits the situation. In explanations, name the object and connect cause to effect. “The forces balance, so velocity stays constant” gives a physical reason; “it stays the same because nothing changes” repeats the observation.

Contents · Previous chapter · Next chapter

CHAPTER 3 OF 18

3. Words 1–10: measuring with meaning

Back to contents

Identify the quantity, choose a suitable instrument and consider possible reading errors. Keep these words beside your practical notes to connect the instrument’s display with its meaning.

Word or termMeaningExample or use
1. Physical quantityA measurable property expressed with a numerical value and an appropriate unit.A track length of 1.8 m gives the quantity, value and unit together.
2. MagnitudeThe size of a quantity, considered separately from its direction.A 7 N force to the left has a magnitude of 7 N.
3. SI unitA unit belonging to the International System of Units.Use metres, kilograms and seconds when substituting into standard mechanics equations.
4. PrefixA symbol or word placed before a unit to indicate a power-of-ten multiplier.Milli means one thousandth, so 250 mm equals 0.250 m.
5. Instrument rangeThe interval of values that an instrument can measure as specified.A force meter rated up to 5 N is unsuitable for measuring 12 N.
6. ResolutionThe smallest change in a quantity that an instrument can distinguish.A display changing in steps of 0.1 g cannot directly show a 0.01 g change.
7. Zero errorAn instrument reading different from zero when the measured quantity should be zero.A force meter reading 0.2 N with no load needs its zero checked.
8. Parallax errorA reading error caused by viewing a scale from an unsuitable angle.Look perpendicular to a ruler’s scale when locating the end of a block.
9. PrecisionHow closely repeated measurements of the same quantity agree with one another.Similar repeated timings suggest precision, but a shared timing bias may remain.
10. AccuracyHow close a measurement is to a true or accepted reference value.A balance can give repeatable readings that are inaccurate if its zero is wrong.
Words 1–10: measuring with meaning

Repeating readings reveals scatter but does not automatically remove zero error. Choose an improvement addressing the actual problem instead of prescribing repetition for every question.

Contents · Previous chapter · Next chapter

CHAPTER 4 OF 18

4. Words 11–20: describing where and how an object moves

Back to contents

Choose a reference point and keep direction clear. Sketch the starting position, finishing position and path travelled. Describe the motion before explaining its cause.

Word or termMeaningExample or use
11. Reference pointA chosen location used to describe another object’s position or movement.The start line is the reference point when recording a trolley’s position.
12. PositionWhere an object is relative to a chosen reference point.“Two metres right of the marker” gives a position with direction.
13. DistanceThe total length of the path travelled.A toy travels 5 m forward and 2 m back, covering 7 m altogether.
14. DisplacementThe change in position from start to finish, including direction.The same toy finishes 3 m forward of its starting point.
15. Time intervalThe elapsed time between two specified events.A timer reading changes from 3 s to 9 s: the interval is 6 s.
16. SpeedThe rate at which an object covers distance.At a steady 0.5 m/s, a trolley covers half a metre each second.
17. Average speedTotal distance travelled divided by the total time taken.Travelling 15 m in 10 s gives an average speed of 1.5 m/s.
18. VelocityThe rate of change of displacement, including direction.A velocity of 0.5 m/s east differs from 0.5 m/s west.
19. ScalarA quantity fully described by its magnitude without a direction.Distance is scalar: a 7 m journey needs no direction to state its length.
20. VectorA quantity requiring both magnitude and direction for a complete description.Displacement is vector: 3 m east specifies more than 3 m alone.
Words 11–20: describing where and how an object moves

Average speed includes stops within the stated interval. Adding two speeds and dividing by two is not generally valid; calculate total distance and total time.

Contents · Previous chapter · Next chapter

CHAPTER 5 OF 18

5. Words 21–30: reading acceleration and graphs

Back to contents

These graph examples describe motion along a straight line in one direction. Name the axes before interpreting a slope or area; shape alone cannot supply meaning.

Word or termMeaningExample or use
21. AccelerationThe rate of change of velocity.An increase from 1 m/s to 5 m/s in 2 s gives average acceleration 2 m/s².
22. Uniform accelerationAcceleration that remains constant over the interval considered.A velocity increasing by 2 m/s every second shows uniform acceleration.
23. Non-uniform accelerationAcceleration that changes during the interval considered.Unequal velocity increases in equal times show that acceleration is changing.
24. DecelerationAcceleration opposite to the direction of motion, causing speed to decrease.A trolley moving right slows when its acceleration points left.
25. Initial velocityThe velocity at the start of a chosen interval.A trolley already moving at 2 m/s does not have zero initial velocity.
26. Final velocityThe velocity at the end of a chosen interval.If the trolley stops, its final velocity for that interval is zero.
27. Distance–time graphA graph showing distance travelled against elapsed time.A horizontal section indicates that no additional distance is covered during that interval.
28. Speed–time graphA graph showing speed against elapsed time.A rising straight section shows a constant rate of increase of speed.
29. GradientChange in the vertical-axis quantity divided by the corresponding horizontal-axis change.A distance increase of 6 m over 3 s gives gradient 2 m/s.
30. Area under a graphThe area between a plotted line and the time axis over an interval.Under a speed–time graph, a 4 s by 2 m/s rectangle represents 8 m.
Words 21–30: reading acceleration and graphs

A rising straight distance–time line represents constant speed. A rising straight speed–time line represents uniform acceleration in the stated direction. Say which graph you mean whenever describing a line as “steeper”.

Contents · Previous chapter · Next chapter

CHAPTER 6 OF 18

6. Words 31–40: identifying the forces

Back to contents

Name the force, the object it acts on and what supplies it. A force diagram should identify interactions rather than simply show unexplained arrows.

Word or termMeaningExample or use
31. ForceA push or pull arising from an interaction between objects.A hand pushes a trolley; the force acts on the trolley.
32. Contact forceA force arising through physical contact between objects.The table’s support force acts where the book touches the table.
33. Non-contact forceA force that acts without the interacting objects needing to touch.Earth attracts a falling ball even while the ball is above the ground.
34. FrictionA contact force opposing relative sliding, or the tendency to slide, between surfaces.Friction can prevent a shoe from slipping backwards when its wearer pushes against the ground.
35. Air resistanceA resistive force caused by movement relative to surrounding air.Air resistance acts upward on an object falling through still air.
36. TensionA pulling force transmitted through a stretched string, rope or similar connector.A taut vertical string pulls upward on the object suspended from it.
37. Normal forceA contact force perpendicular to the surfaces where they meet.A horizontal table exerts an upward normal force on a resting box.
38. Gravitational forceAn attractive force between objects because of their masses.Earth’s gravitational force on a book acts towards Earth’s centre.
39. Electrostatic forceA force of attraction or repulsion associated with electric charges.Two positively charged objects repel; their electrostatic interaction does not require contact.
40. Magnetic forceA force associated with magnets, magnetic materials or moving electric charges.A magnet can attract an iron object across a small gap.
Words 31–40: identifying the forces

Friction does not always oppose an object’s overall motion. Consider relative slipping between surfaces. In the simple sliding examples below, friction opposes sliding.

Contents · Previous chapter · Next chapter

CHAPTER 7 OF 18

7. Words 41–50: connecting forces to changes in motion

Back to contents

Group the forces on one chosen object and calculate their resultant along the stated line. Include direction even when the arithmetic involves only subtraction.

Word or termMeaningExample or use
41. Resultant forceThe single force representing the combined effect of forces on an object.Forces of 11 N right and 3 N left give 8 N right.
42. Balanced forcesForces acting on an object whose resultant is zero.A moving trolley can have balanced forces and continue at constant velocity.
43. Unbalanced forcesForces acting on an object with a non-zero resultant.A resultant force to the right produces acceleration to the right.
44. Free-body diagramA diagram showing the external forces acting on one selected object.For a hanging mass, show its downward weight and the string’s upward tension.
45. InteractionA situation in which objects exert forces on one another.When a hand pushes a wall, the wall also pushes the hand.
46. Action–reaction pairEqual-magnitude, opposite-direction forces of the same interaction acting on different objects.The book pushes down on the table; the table pushes up on the book.
47. InertiaAn object’s resistance to a change in its velocity.For the same resultant force, a larger mass has a smaller acceleration.
48. Constant velocityVelocity that stays unchanged in both magnitude and direction.A trolley moving straight at 2 m/s has no acceleration while that velocity persists.
49. One-dimensional motionMotion described along a single straight line.Choose right as positive when analysing a trolley moving along a straight track.
50. Resistive forceA force that opposes motion relative to a surface or surrounding material.Sliding friction and air resistance can both reduce a moving trolley’s speed.
Words 41–50: connecting forces to changes in motion

A book’s weight and the table’s normal force can balance on the book. Both act on the same object; an action–reaction pair acts on two different objects.

Contents · Previous chapter · Next chapter

CHAPTER 8 OF 18

8. Words 51–60: mass, gravity and density

Back to contents

Separate matter from gravitational force. For density, compare mass with volume: a larger total mass does not by itself establish a larger density.

Word or termMeaningExample or use
51. MassA measure of the amount of matter in a body.A mass of 750 g is 0.750 kg before substitution into a kilogram-based equation.
52. WeightThe gravitational force acting on an object.A 0.750 kg object weighs 7.5 N where g is 10 N/kg.
53. Gravitational fieldA region where a mass experiences a force due to gravitational attraction.An object above Earth’s surface is still within Earth’s gravitational field.
54. Gravitational field strengthGravitational force per unit mass at a point, written g.A field strength of 10 N/kg means each kilogram experiences 10 N of gravitational force.
55. Free fallMotion under gravity alone, with other forces neglected.In a model ignoring air resistance, objects near Earth accelerate downward at about 10 m/s².
56. VolumeThe amount of three-dimensional space occupied by an object or substance.A rectangular block measuring 4 cm by 3 cm by 2 cm occupies 24 cm³.
57. DensityMass per unit volume of a material or object.A 54 g sample occupying 20 cm³ has density 2.7 g/cm³.
58. BalanceAn instrument used to measure mass.Read a sample’s mass from a correctly zeroed balance, then record the unit.
59. Measuring cylinderA graduated container used to measure liquid volume.For water, read the bottom of the meniscus at eye level on a level surface.
60. Displacement methodFinding an immersed object’s volume from the volume of liquid it displaces.A suitable fully submerged solid raises water from 40 cm³ to 55 cm³: its volume is 15 cm³.
Words 51–60: mass, gravity and density

For water displacement, use a suitable solid that does not dissolve, react with water or absorb it significantly. Submerge it fully without trapped air. The method’s conditions matter as much as the subtraction.

Contents · Previous chapter · Next chapter

CHAPTER 9 OF 18

9. Words 61–70: pressure, units and proportional reasoning

Back to contents

Pressure compares force with area. Read dimensions carefully: converting centimetres into metres differs from converting square centimetres into square metres.

Word or termMeaningExample or use
61. PressureNormal force per unit area of a surface.A 20 N normal force spread uniformly over 0.04 m² gives pressure 500 Pa.
62. Contact areaThe area over which two surfaces touch and transmit contact forces.Turning a block onto a larger face can increase its contact area with the table.
63. PerpendicularAt a right angle to a specified line or surface.For pressure = force ÷ area, use the force acting perpendicular to the surface.
64. NewtonThe SI unit of force, symbol N.A resultant force of 1 N gives a 1 kg mass acceleration 1 m/s².
65. PascalThe SI unit of pressure, symbol Pa, equal to one newton per square metre.A pressure of 300 Pa means 300 N of normal force per square metre.
66. Square metreAn area unit equal to a square measuring one metre on each side.One square metre equals 10,000 cm², so 200 cm² equals 0.0200 m².
67. Cubic metreA volume unit equal to a cube measuring one metre along each edge.One cubic metre equals 1,000,000 cm³; 1,000 cm³ equals 0.001 m³.
68. Unit conversionChanging the unit used to express a quantity without changing the quantity itself.A length of 80 cm and a length of 0.80 m describe the same length.
69. Direct proportionA relationship where multiplying one quantity by a factor multiplies the other by that factor.At constant area, doubling normal force doubles pressure.
70. Inverse proportionA relationship where one quantity changes by the reciprocal factor of the other.At constant normal force, doubling contact area halves average pressure.
Words 61–70: pressure, units and proportional reasoning

Compare forces at the same area before inferring pressure changes. Doubling both force and area leaves pressure unchanged. State what remains constant in a proportional claim.

Contents · Previous chapter · Next chapter

CHAPTER 10 OF 18

10. Words 71–80: identifying energy stores

Back to contents

Choose the object or collection of objects being studied, then identify its energy stores. Compare conditions before and after the event to track changes.

Word or termMeaningExample or use
71. EnergyA conserved quantity that can be stored and transferred, measured in joules.A raised load can transfer energy as it descends and sets another object moving.
72. Energy storeA way of accounting for energy associated with a system’s condition or arrangement.A moving trolley has a kinetic store; a stretched spring has an elastic store.
73. Kinetic energyEnergy associated with an object’s motion, calculated as ½mv².A 2 kg trolley moving at 3 m/s has kinetic energy 9 J.
74. Gravitational potential energyEnergy associated with the arrangement of masses in a gravitational field.Raising a load near Earth increases gravitational potential energy by mgh for height increase h.
75. Elastic potential energyEnergy stored when an elastic object is stretched or compressed.Compressing a suitable spring can increase its elastic potential energy store.
76. Chemical potential energyEnergy associated with the chemical composition and arrangement of substances.A battery’s chemical store decreases as it supplies energy to a working motor.
77. Nuclear energy storeEnergy associated with the arrangement of particles within atomic nuclei.Nuclear changes can transfer energy from this store; this guide does not calculate those changes.
78. Internal energyThe total microscopic kinetic and potential energy of the particles in a system.Friction can increase the internal energy of a sliding block and its surroundings.
79. SystemThe object or collection of objects selected for an analysis.Include the load and Earth when describing the gravitational energy change during lifting.
80. SurroundingsEverything outside the chosen system that may interact with it.For a trolley-only system, the track and surrounding air are outside the system.
Words 71–80: identifying energy stores

A store describes energy associated with a system. A transfer describes how energy moves between stores or crosses the system boundary. Identify both in an explanation.

Contents · Previous chapter · Next chapter

CHAPTER 11 OF 18

11. Words 81–90: tracking work and energy transfers

Back to contents

Identify the starting store, transfer process and destination. Where an equation uses a distance, check that it is the distance specified by the relationship.

Word or termMeaningExample or use
81. Energy transferA process by which energy moves between stores or between a system and its surroundings.A motor transfers energy mechanically to a load as it lifts the load.
82. Mechanical transferEnergy transfer when a force acts through a distance in its direction.A person pulling a box along a floor does mechanical work on the box.
83. Electrical transferEnergy transfer associated with an electric current.A battery transfers energy electrically to a motor that moves a trolley.
84. HeatingEnergy transfer caused by a temperature difference.A warmer brake transfers energy to cooler surrounding air.
85. Wave transferEnergy transfer through waves, including electromagnetic waves and sound.Sound from a moving machine carries some energy into the surroundings.
86. Work doneEnergy transferred by a force through displacement in its direction.A constant 6 N pull over 2 m along the pull does 12 J of work.
87. JouleThe SI unit of energy and work, symbol J.One joule is transferred when a constant 1 N force acts through 1 m in its direction.
88. Conservation of energyThe principle that total energy is not created or destroyed during changes.Energy transferred to the surroundings must be included when accounting for a slowing trolley.
89. DissipationEnergy becoming spread through the surroundings and less available for the intended task.Braking spreads energy into internal stores of the brakes, tyres, road and air.
90. Energy balanceAn accounting that includes energy entering, leaving and changes in the system’s stores.If 40 J enters and stored energy rises by 24 J, 16 J leaves the system.
Words 81–90: tracking work and energy transfers

Holding a bag still can feel tiring. Without displacement of the bag, the holding force does no mechanical work on it. The person’s body still transfers energy internally.

Contents · Previous chapter · Next chapter

CHAPTER 12 OF 18

12. Words 91–100: explaining power and judging a result

Back to contents

Connect calculations to a conclusion. Identify the quantity being compared, the conditions that matter and any information still needed.

Word or termMeaningExample or use
91. PowerThe rate of energy transfer or work done.Transferring 90 J in 3 s gives an average power of 30 W.
92. WattThe SI unit of power, symbol W, equal to one joule per second.A constant output power of 12 W transfers 12 J each second.
93. Energy inputEnergy transferred into the chosen system during an interval.A lifting device receives 40 J of electrical energy during a short operation.
94. Energy outputEnergy transferred out of the chosen system during an interval.State whether the output means all transfers or only the useful transfer to the load.
95. RateHow much a quantity changes or is transferred per unit time.Power compares energy with time; speed compares distance with time.
96. VariableA quantity or condition that can take different values in an investigation.Trolley mass and pulling force are possible variables in a motion investigation.
97. Control variableA relevant quantity or condition kept unchanged to make a comparison meaningful.Keep total moving mass constant when investigating how resultant force affects acceleration.
98. EstimateA reasoned approximate value based on available information.Estimate a block’s volume before calculating to spot an implausible unit conversion.
99. AssumptionA stated condition accepted when using a simplified model.“Air resistance is negligible” allows a calculation based on gravity alone.
100. ConclusionAn answer or judgement supported by the stated evidence and reasoning.“The speed stays constant because the resultant force is zero” connects the observation to its cause.
Words 91–100: explaining power and judging a result

Two devices can transfer equal energy at different powers because transfer times differ. Specify input power or useful output power when a device has several transfers.

Contents · Previous chapter · Next chapter

CHAPTER 13 OF 18

13. Four worked cases: connect the words to a complete solution

Back to contents

The following situations and measurements are invented teaching examples, not data from Punggol routes or businesses. Sketch the object and identify the interval before selecting an equation.

Case 1: a trolley journey with three stages

A trolley moves along a straight track in one direction. It accelerates uniformly from rest to 3 m/s in 2 s, continues at 3 m/s for 4 s, then slows uniformly to rest in 2 s. The speed–time graph consists of a rising line, a horizontal line and a falling line.

Distance is the area under that graph. The first triangle gives ½ × 2 × 3 = 3 m. The rectangle gives 4 × 3 = 12 m. The final triangle gives another 3 m. Total distance is 18 m and total time is 8 s, so average speed is 18 ÷ 8 = 2.25 m/s.

The initial acceleration is (3 − 0) ÷ 2 = 1.5 m/s². Taking the travel direction as positive, the final acceleration is (0 − 3) ÷ 2 = −1.5 m/s². The negative sign describes the direction of acceleration; the trolley is still moving forward while slowing. It does not automatically mean the trolley travels backwards.

Case 2: a moving object with balanced forces

A 4 kg trolley initially experiences a 10 N push to the right and 2 N of resistance to the left. Its vertical forces balance. The horizontal resultant is 10 − 2 = 8 N to the right. Using resultant force = mass × acceleration gives acceleration = 8 ÷ 4 = 2 m/s² to the right.

In a later stage, the push is adjusted to 2 N while the resistance remains 2 N. The trolley is already moving at 3 m/s along the straight track. Its resultant force is now zero, so its acceleration is zero and it continues at that velocity while these conditions hold.

Balanced forces are still present in the second stage. Removing the push while the 2 N resistance remains produces a leftward resultant, slowing the rightward motion. Draw these three stages separately.

Case 3: rotating a block changes pressure, not density

A rigid rectangular block has mass 0.60 kg and dimensions 20 cm by 10 cm by 5 cm. Its volume is 1,000 cm³, or 0.001 m³. Its density is 0.60 ÷ 0.001 = 600 kg/m³. With g = 10 N/kg, its weight is 6 N.

Resting on its 20 cm by 10 cm face, the contact area is 200 cm² = 0.020 m². The average pressure on a horizontal table is 6 ÷ 0.020 = 300 Pa. On its 20 cm by 5 cm face, the area is 100 cm² = 0.010 m², so average pressure is 600 Pa.

The mass, volume, density and weight remain unchanged. A smaller contact area explains the larger pressure. Distinguish the block’s properties from the effect of how it is placed.

Case 4: lifting connects work, energy and power

A device lifts a 3 kg load through a vertical height of 0.80 m in 2 s. Take g = 10 N/kg. The load starts and finishes at rest. The gain in gravitational potential energy of the load–Earth system is mgh = 3 × 10 × 0.80 = 24 J. The average useful power for raising the load is 24 ÷ 2 = 12 W.

Consider the device, load and Earth together. The device receives 40 J of electrical energy. If no other stores retain an increase, 40 − 24 = 16 J transfers to the surroundings. The average input power is 40 ÷ 2 = 20 W. These two powers describe different transfers, so they need not be equal.

If the same load reaches the same height in 1 s, the gravitational energy gain is still 24 J and average useful power becomes 24 W. We cannot infer the new total input energy without further information about the device’s operation.

Contents · Previous chapter · Next chapter

CHAPTER 14 OF 18

14. Ten practice questions with explained answers

Back to contents

Try each question before reading its answer. Include quantities and units. These original exercises check understanding; they are not past examination questions or predictions.

Practice 1: include the stop

Question: A toy travels 12 m in 6 s, stops for 4 s, then travels another 8 m in 5 s. Find its average speed for the whole journey.

Answer: Total distance = 20 m. Total time = 6 + 4 + 5 = 15 s. Average speed = 20 ÷ 15 = approximately 1.33 m/s. Excluding the stop would answer a different question. Averaging the speeds of the two moving stages would also ignore their different durations.

Practice 2: separate distance and displacement

Question: A student walks 9 m east and then 4 m west along one straight line. State the distance travelled and final displacement from the starting point.

Answer: Distance is 9 + 4 = 13 m. Displacement is 5 m east. Distance counts the entire path; displacement compares the final position with the initial position. A direction belongs in the displacement answer.

Practice 3: interpret the axes

Question: A straight distance–time graph rises from 3 m at 1 s to 11 m at 5 s for motion in one direction. Find the speed and state whether the object accelerates during this interval.

Answer: Speed = (11 − 3) ÷ (5 − 1) = 2 m/s. The constant gradient shows constant speed. As direction is unchanged, velocity is constant and acceleration is zero. Use changes in both quantities; 11 ÷ 5 would not give the gradient between these points.

Practice 4: calculate a slowing motion

Question: A trolley moving right slows uniformly from 6 m/s to 2 m/s in 4 s. Take right as positive. Find its acceleration.

Answer: Acceleration = (2 − 6) ÷ 4 = −1 m/s², or 1 m/s² to the left. The trolley’s velocity remains rightward throughout this interval. The acceleration is opposite to the motion, so the speed decreases.

Practice 5: use the resultant

Question: A 2.5 kg object has forces of 9 N right and 4 N left acting along its line of motion. Other forces balance. Find the acceleration.

Answer: Resultant force = 5 N right. Acceleration = 5 ÷ 2.5 = 2 m/s² right. Using 9 N alone ignores the opposing force. Without knowing the object’s initial velocity, we cannot conclude that it must already be travelling right.

Practice 6: identify the correct force pair

Question: A book rests on a table. Which force forms an action–reaction pair with the table’s upward contact force on the book?

Answer: The book’s downward contact force on the table. These forces belong to the same interaction and act on different objects. The book’s weight also acts downward, but it acts on the book and comes from its gravitational interaction with Earth.

Practice 7: compare gravity environments

Question: An object of mass 0.40 kg is moved between two imagined locations with field strengths 10 N/kg and 5 N/kg. Find its weight at each location and state what happens to its mass.

Answer: The weights are 0.40 × 10 = 4 N and 0.40 × 5 = 2 N. The mass remains 0.40 kg. The gravitational force changes because field strength changes; the object has not lost half its matter.

Practice 8: convert the area

Question: A 30 N normal force acts uniformly over an area of 150 cm². Calculate the pressure in pascals.

Answer: Area = 150 ÷ 10,000 = 0.015 m². Pressure = 30 ÷ 0.015 = 2,000 Pa. Dividing the area by 100 would convert it incorrectly, because both length dimensions contribute to an area conversion.

Practice 9: notice the squared speed

Question: A 1.5 kg object moves at 4 m/s. Find its kinetic energy. What is its kinetic energy at 8 m/s if mass is unchanged?

Answer: Initially, kinetic energy = ½ × 1.5 × 4² = 12 J. At 8 m/s it is ½ × 1.5 × 8² = 48 J. Doubling speed multiplies kinetic energy by four. Doubling mass instead, while keeping speed unchanged, would double kinetic energy.

Practice 10: compare amount and rate

Question: Device A transfers 180 J of useful energy in 6 s. Device B transfers the same useful energy in 9 s. Compare their average useful powers. Can you determine their input energies?

Answer: A supplies useful power 180 ÷ 6 = 30 W; B supplies 180 ÷ 9 = 20 W. A transfers the same useful energy faster. Input energies cannot be determined from these figures alone because other transfers and changes in stores are not specified.

Contents · Previous chapter · Next chapter

CHAPTER 15 OF 18

15. Find the error before adding more questions

Back to contents

Ask the student to explain one solution and identify the first uncertain decision. Repair that step before assigning another set of questions.

  • The quantity is confused: the student uses kilograms for weight or watts for energy. Return to one concrete example and label quantity, symbol and unit separately.
  • The diagram is incomplete: the student uses the pushing force as the resultant. Draw every relevant force on the selected object before using the equation.
  • The graph is misread: the student calls any rising line acceleration. Cover the plotted line briefly and read the axes aloud first.
  • The units change the result: the student treats cm² like cm. Convert the two side lengths of a small rectangle, calculate both areas and compare.
  • The reasoning is unfinished: the student gives a number without a conclusion. Add one sentence explaining what that number means for this object.

Record the mistake, repaired idea and one fresh example. Change mass while keeping force fixed, or contact area while keeping weight fixed. Check whether the student can predict the change before calculating.

Contents · Previous chapter · Next chapter

CHAPTER 16 OF 18

16. A manageable two-week practice plan

Back to contents

Adjust this routine to schoolwork and other commitments. A fifteen-minute session might include three minutes of recall, five using terms, five solving one question and two explaining it. A difficult group can take several sessions.

  1. Sessions 1–2: repair measurement and unit language; use the first two groups and explain a simple journey.
  2. Sessions 3–4: connect motion words to graphs; sketch a journey and check both gradient and area where appropriate.
  3. Sessions 5–6: identify forces and study dynamics; compare acceleration, steady motion and slowing using the same trolley.
  4. Sessions 7–8: connect mass, weight, density and pressure; explain why rotating a rigid block changes some quantities but not others.
  5. Sessions 9–10: follow energy stores and transfers, then compare powers; finish with selected practice questions without the tables.

Revisit two older terms before opening a new group. Count a term as secure when the student can explain it, use it and distinguish it from a nearby idea.

Contents · Previous chapter · Next chapter

CHAPTER 17 OF 18

17. How parents and a small group can support the learning

Back to contents

Ask the student to teach one distinction using a paper example: a lifted bag, a resting book or a toy on a straight track. Ask what is assumed and what information is missing. Give the student time to revise the explanation.

For a possible three-student tutorial activity, one learner describes the motion, one draws the forces and one checks the calculation and units. Rotate the roles on the next problem. A student who speaks confidently should still solve independently; a quieter student should have time to write before explaining. The group becomes useful when each learner’s reasoning is visible.

Compare similar tasks completed independently at different times. Look for fewer quantity confusions, complete force diagrams, correct conversions and explanations connecting evidence to physical ideas. Ask the teacher or tutor which misunderstanding the next lesson will address. Worksheet quantity alone does not establish progress.

Study these numerical examples on paper; follow school safety instructions for practical work. Bring unresolved questions back to the school chapter and its diagrams, then choose one precise idea to practise next.

Contents · Previous chapter · Next chapter

CHAPTER 18 OF 18

18. Official references and related reading

Back to contents

The definitions, teaching cases and practice questions on this page are original educational explanations. Check the official syllabus for the relevant examination year and use the school’s current sequence to decide what to study now.

Contents · Previous chapter · Choose a reading route

Continue from here: Start Here · Tuition · Education · Pathways · Parenting 101 · All Site Routes

eduKate Punggol

Contact

83 Punggol Central, Singapore 828761

edu|Kate Bukit Timah

8 Fourth Avenue, Singapore 268674

By Appointment +65 8823 1234
admin@edukatesg.com

Email Us

When a child finally understands, school becomes less frightening and the future opens wider. Email us for the latest schedules and fees.

← 返回

感谢您的回复。 ✨