Small Group Tutorials

Here to help students catch up, keep up, and move ahead. Book a consultation here.

Top 100 Secondary 3 G2 Vocabulary List for Punggol | Heat, Waves and Electricity

Three students sit around open books and worksheets at a classroom table, reading, writing and discussing the work together.

This Top 100 Secondary 3 G2 Vocabulary List for Punggol explains the words students need when studying heat, waves and electricity. It connects particle behaviour to heating, wave diagrams to frequency and wavelength, and circuit language to charge, current, voltage and energy. Each numbered entry gives a clear meaning and an original example, followed by worked practice that shows how to use the idea in an explanation or calculation.

Start with the topic being taught at school and choose five terms that are often confused. A parent can ask the student to explain what is moving, what is being transferred and which quantity is measured. “Current is used up” and “a hotter object always contains more energy” reveal different misunderstandings. This guide helps locate those differences before adding more questions, with paper-based exercises and straightforward checking steps.

  • Audience: Secondary 3 learners taking a G2 Science combination containing Physics, and parents supporting them.
  • Scope: thermal processes, wave properties, the electromagnetic spectrum, charge, circuits and electrical energy.
  • Included: 100 distinct terms in ten groups, with worked explanations and twelve practice tasks with answers.
  • Subject combinations: Physics is included in K223 Physics/Chemistry and K224 Physics/Biology; K225 Chemistry/Biology does not contain Physics.
  • Selection: eduKate teaching priorities, not a prescribed SEAB list, ranking or prediction.
  • Use: follow the school’s current sequence and confirm the syllabus for the student’s eventual examination year.

Contents

Understand the scope and learn terms — chapters 1–2
  1. Check the curriculum connection
  2. The 100 heat, waves and electricity terms
Explain and practise — chapters 3–6
  1. Explain heating without treating heat as a substance
  2. Read the axes before reading the wave
  3. Separate charge, current, voltage and energy
  4. Twelve worked practice tasks
Repair, plan and continue — chapters 7–10
  1. Repair the sentence as well as the calculation
  2. Make five terms usable each time
  3. Help a student identify the next step
  4. Official references and teaching scope

CHAPTER 1 OF 10

1. Check the curriculum connection

Back to contents

The 2027 G2 Science syllabus includes particle models and thermal processes, general wave properties, the electromagnetic spectrum, electric charge, direct-current circuits and practical electricity within Physics. Its cover identifies K223 as Physics/Chemistry, K224 as Physics/Biology and K225 as Chemistry/Biology. This article develops selected Physics concepts from that document and does not replace the other science in a student’s combination.

The SEAB G2 syllabus index identifies the subject combinations. G2 is a subject level, and school teaching order can differ. The 2027 document is a reference here; a student starting Secondary 3 in 2027 would normally reach Secondary 4 in 2028. Confirm the applicable examination-year syllabus rather than assuming that every Secondary 3 reader is a 2027 candidate.

The practice uses particle explanations, wave diagrams and circuit calculations. All numerical readings are invented. Circuit tasks are diagram and calculation exercises; practical work belongs in a suitable supervised setting, and mains appliances must not be opened or rewired for these activities.

Contents · Next chapter

CHAPTER 2 OF 10

2. The 100 heat, waves and electricity terms

Back to contents

Read related terms together. Temperature and internal energy describe different things; frequency and wave speed use different units; current and potential difference measure different relationships. In each example, underline the condition that makes the statement accurate. A short qualification such as “same temperature” or “in the same medium” can be essential.

1–10: Temperature and the particle model

Word or termMeaningExample or use
1. Kinetic particle modelA model explaining matter’s properties through the arrangement, motion and interactions of its particles.Use the model to explain an observation, such as why a gas fills its container.
2. ParticleA small constituent of matter, such as an atom or molecule, represented in a scientific model.In a particle diagram, identify what each dot represents before explaining its movement.
3. Random motionMovement without one fixed overall direction, as particles continually change direction.Gas particles move randomly; their motion is different from an entire gas flowing through a pipe.
4. TemperatureA measure of how hot or cold something is, related to the particles’ average kinetic energy.Two samples at the same temperature need not have the same total internal energy.
5. Average kinetic energyThe mean energy associated with particle motion in the model being considered.A higher temperature corresponds to greater average kinetic energy, rather than simply more particles.
6. Internal energyThe total random kinetic energy of particles plus the potential energy associated with their interactions.Internal energy can increase during melting even when the temperature remains constant.
7. Thermal energy transferEnergy transferred by heating because there is a temperature difference.A warmer cup transfers energy to cooler surroundings; describe the direction using the temperatures.
8. Temperature differenceThe difference between two temperature readings, indicating how much warmer one region is than another.A cup at 55°C and surroundings at 25°C have a temperature difference of 30°C.
9. Thermal equilibriumA condition in which bodies have the same temperature and there is no net energy transfer by heating between them.Equal temperatures indicate thermal equilibrium; they do not show that the bodies contain equal energy.
10. ThermometerAn instrument used to measure temperature through a property that changes with temperature.Read the scale and unit carefully; a thermometer reading does not directly measure internal energy.
Terms 1–10: Temperature and the particle model

11–20: States of matter and energy changes

Word or termMeaningExample or use
11. SolidA state with particles close together and vibrating about fixed positions, giving a fixed shape and volume.A solid’s particles still move microscopically even when the object appears stationary.
12. LiquidA state with closely spaced particles able to move past one another, giving fixed volume but variable shape.A liquid takes its container’s shape without spreading to fill all available space like a gas.
13. GasA state with widely separated particles moving freely, giving neither fixed shape nor fixed volume.Gas can be compressed because much of the space between its particles can be reduced.
14. MeltingThe change from solid to liquid as energy is transferred into the material.A pure substance melting at fixed pressure can absorb energy while remaining at its melting temperature.
15. SolidificationThe change from liquid to solid as energy is transferred out of the material.During solidification, particles become arranged in a solid structure; the particles themselves do not solidify individually.
16. BoilingVaporisation occurring throughout a liquid, with bubbles of vapour forming within it.For a pure liquid at fixed pressure, boiling can continue while its temperature remains constant.
17. CondensationThe change from gas to liquid, accompanied by energy transfer from the substance to its surroundings.Water vapour condensing on a cooler surface forms liquid droplets and releases energy.
18. Change of stateA physical change between solid, liquid and gas without changing the substance’s chemical identity.Melting ice remains water; explain the change through particle arrangement and interaction.
19. Intermolecular forcesForces acting between molecules, helping determine their arrangement and separation.When molecular ice melts, discuss changes between molecules rather than claiming the water molecules break apart.
20. Particle potential energyEnergy associated with the positions and interactions of particles relative to one another.During a constant-temperature phase change, changing particle separation can change this part of internal energy.
Terms 11–20: States of matter and energy changes

21–30: Conduction, convection and radiation

Word or termMeaningExample or use
21. ConductionEnergy transfer through a material by particle interactions, with mobile electrons contributing in metals.A metal rod can transfer energy along itself without the entire rod moving towards the cooler end.
22. Thermal conductorA material through which energy is transferred relatively readily by conduction.A metal spoon conducts energy more readily than a similarly shaped plastic spoon under comparable conditions.
23. Thermal insulatorA material that reduces the rate of energy transfer by conduction.An insulating layer slows cooling; it does not create energy or necessarily prevent all transfer.
24. Lattice vibrationThe vibration of particles about their positions in a solid structure.More vigorous vibrations can transfer energy to neighbouring particles, contributing to conduction through a solid.
25. Mobile electronsElectrons able to move through a material rather than remain associated with one fixed atom.In metals, mobile electrons help transfer energy from hotter regions towards cooler regions.
26. ConvectionEnergy transfer involving the bulk movement of a liquid or gas.Describe which fluid moves; saying “heat rises” does not identify the moving material.
27. FluidA substance that can flow, including liquids and gases.Air and water are fluids, so both can take part in convection currents.
28. Convection currentCirculating fluid motion produced when temperature-related density differences cause warmer and cooler regions to move.Warmer, less dense fluid may rise while cooler, denser fluid moves into its place.
29. RadiationEnergy transfer through electromagnetic waves, without requiring a material medium.A warm surface can transfer energy by infrared radiation across a space containing no air.
30. VacuumA region containing no matter in the ideal model, or very little matter in practical use.Electromagnetic radiation can cross a vacuum; conduction and convection require matter.
Terms 21–30: Conduction, convection and radiation

31–40: Radiating surfaces and wave descriptions

Word or termMeaningExample or use
31. EmitterA surface or object that gives out radiation.At the same temperature and area, a dull black surface generally emits infrared more effectively than a shiny metallic one.
32. AbsorberA surface or material that takes in incident radiation and gains energy from it.Compare surfaces under the same incident radiation before judging which is the better absorber.
33. ReflectorA surface that redirects incident radiation instead of absorbing all of it.A shiny surface can reflect much infrared radiation, helping reduce transfer in an appropriate design.
34. Surface areaThe area of an object’s exposed surface through which energy can be transferred.A larger exposed area can increase radiative transfer when temperature and surface properties are otherwise comparable.
35. WaveA travelling disturbance that transfers energy; in the simple model, matter is not carried along with it.A pulse travels along a rope while individual sections move about their original positions.
36. VibrationRepeated motion about an equilibrium position.A point on a vibrating rope moves back and forth while the disturbance travels along the rope.
37. MediumThe material through which a mechanical wave travels.Sound needs a medium such as air; electromagnetic waves can travel without a material medium.
38. WavefrontA line or surface joining points on a wave that are at the same stage of oscillation.Neighbouring crests in a ripple diagram mark successive wavefronts; measure their separation carefully.
39. Wave speedThe distance travelled by the wave disturbance per unit time.Wave speed describes the travelling pattern, not the back-and-forth speed of one vibrating particle.
40. DisplacementA particle’s directed distance from its equilibrium position in the wave description.On a displacement graph, values above and below zero represent opposite directions from equilibrium.
Terms 31–40: Radiating surfaces and wave descriptions

41–50: Wave quantities and wave types

Word or termMeaningExample or use
41. AmplitudeThe greatest magnitude of displacement from the equilibrium position.Crest-to-trough distance is twice the amplitude for a symmetric wave, not the amplitude itself.
42. WavelengthThe distance between successive points at the same stage of oscillation, such as neighbouring crests.Measure one full repeating spatial pattern, rather than the horizontal distance from crest to trough.
43. FrequencyThe number of complete oscillations or waves passing a point per second.A frequency of 5 Hz means five complete cycles each second, not five metres travelled.
44. PeriodThe time taken for one complete oscillation or cycle.If ten cycles take two seconds, the period is 0.2 s and the frequency is 5 Hz.
45. CrestA point of maximum positive displacement in a transverse-wave diagram.Two adjacent crests are one wavelength apart on a displacement–distance graph.
46. TroughA point of maximum negative displacement in a transverse-wave diagram.A trough lies below equilibrium in the chosen diagram; negative displacement does not mean negative amplitude.
47. Transverse waveA wave whose oscillations are perpendicular to the direction of energy transfer.A wave along a rope is a useful example when the rope moves up and down.
48. Longitudinal waveA wave whose oscillations are parallel to the direction of energy transfer.Sound in air involves particles oscillating along the direction in which the disturbance travels.
49. CompressionA region of a longitudinal wave where particles are closer together than at equilibrium.Successive compressions are one wavelength apart; the same particles do not travel with each compression indefinitely.
50. RarefactionA region of a longitudinal wave where particles are farther apart than at equilibrium.A rarefaction is a lower-density region of the wave, not an empty gap containing no particles.
Terms 41–50: Wave quantities and wave types

51–60: The electromagnetic spectrum

Word or termMeaningExample or use
51. Electromagnetic spectrumThe continuous range of electromagnetic radiation, commonly divided into regions by frequency and wavelength.Learn the region order while remembering that the boundaries between named regions are not physical barriers.
52. Electromagnetic waveA transverse wave involving electric and magnetic fields that can propagate through a vacuum.All electromagnetic waves travel at the same speed in a vacuum; their frequencies can differ.
53. Radio wavesElectromagnetic waves in a long-wavelength region, used for many forms of communication.A radio signal is an electromagnetic wave; the sound from the speaker is a different kind of wave.
54. MicrowavesElectromagnetic waves between radio and infrared in the usual school spectrum order.Microwaves can carry communication signals; their name does not mean every use involves heating food.
55. InfraredElectromagnetic radiation with wavelengths longer than visible red light and shorter than microwaves.Thermal imaging detects infrared radiation associated with surfaces; it does not directly photograph a substance called heat.
56. Visible lightThe region of electromagnetic radiation detectable by the human eye.Visible light can cross a vacuum, unlike sound; both can nevertheless transfer energy.
57. UltravioletElectromagnetic radiation beyond violet light, with shorter wavelengths than the visible region.Ultraviolet can cause some materials to fluoresce; an application should be distinguished from its possible hazards.
58. X-raysElectromagnetic radiation with wavelengths shorter than ultraviolet in the usual spectrum ordering.X-rays can be used to inspect internal structures; their ionising effects require controlled use.
59. Gamma raysHigh-frequency electromagnetic radiation associated with nuclear processes, including some radioactive decays.Gamma rays are waves, whereas alpha and beta radiation involve particles; this distinction prevents confusion over “radiation”.
60. Ionising radiationRadiation energetic enough to remove electrons from atoms or molecules and form ions.X-rays and gamma rays can ionise matter; being invisible does not by itself make radiation ionising.
Terms 51–60: The electromagnetic spectrum

61–70: Electric charge and current

Word or termMeaningExample or use
61. Electric chargeA property of matter that can be positive or negative and gives rise to electrical interactions.Charge is measured in coulombs; distinguish the amount of charge from the rate at which it passes.
62. Positive chargeThe type of charge carried by a proton; an object may become positive by losing electrons.A positively charged object need not have gained protons; electron loss can leave a net positive charge.
63. Negative chargeThe type of charge carried by an electron; an object may become negative by gaining electrons.Extra electrons can give an object a net negative charge without creating new electrons from nothing.
64. Electrostatic attractionThe force drawing unlike charges towards one another in the simple charged-object model.Oppositely charged objects attract; identify the charges before predicting the force direction.
65. Electrostatic repulsionThe force pushing like charges away from one another.Two negatively charged objects repel each other; their shared sign matters, not which object is larger.
66. Electric currentThe rate at which electric charge passes a point in a circuit.A current of 0.2 A means 0.2 C passes each second through the point being considered.
67. Conventional currentThe direction in which positive charge would flow, used when drawing current arrows.In the external circuit of a cell, conventional current goes from its positive terminal towards its negative terminal.
68. Electron flowThe directed movement of electrons through a conducting path.In a metallic wire, electron flow is opposite to conventional current; label which direction an arrow represents.
69. CoulombThe unit of electric charge, equal to the charge passing in one second at a current of one ampere.A charge of 6 C passing in three seconds corresponds to a current of 2 A.
70. AmpereThe unit of electric current, equal to one coulomb passing per second.Convert 250 mA to 0.250 A before using a formula with charge in coulombs and time in seconds.
Terms 61–70: Electric charge and current

71–80: Potential difference and resistance

Word or termMeaningExample or use
71. Potential differenceEnergy transferred per unit charge as charge passes between two points; also called voltage.A 3 V potential difference across a component means 3 J is transferred for each coulomb passing through.
72. Electromotive forceEnergy supplied by a source to the circuit per unit charge, measured in volts.Despite its name, electromotive force is not measured in newtons and is not a mechanical force.
73. VoltThe unit of potential difference and electromotive force, equivalent to one joule per coulomb.A 2 V source supplies 2 J per coulomb in the ideal description, rather than two coulombs per second.
74. Electrical resistanceThe ratio of potential difference across a component to the current through it.For 6 V across a component carrying 0.5 A, its resistance at that operating point is 12 Ω.
75. OhmThe unit of resistance, equivalent to one volt per ampere.A 4 Ω resistor carrying 0.5 A has a potential difference of 2 V across it.
76. Electrical conductorA material containing charged particles that can move through it relatively readily.Metal wires conduct through mobile electrons; describing them as conductors does not mean their resistance is zero.
77. Electrical insulatorA material in which electric charge does not move freely under ordinary conditions.Plastic covering can insulate a wire; damaged covering removes an important protective barrier.
78. Cross-sectional areaThe area of a wire’s cut face perpendicular to its length.For the same material, length and temperature, a larger cross-sectional area gives a smaller resistance.
79. ResistorA circuit component used to provide electrical resistance.In a circuit diagram, identify the resistor separately from the source and measuring instruments.
80. Variable resistorA component whose resistance can be adjusted within its working range.Changing a variable resistor can change the current; interpret the whole circuit before predicting the effect.
Terms 71–80: Potential difference and resistance

81–90: Read and measure a direct-current circuit

Word or termMeaningExample or use
81. Direct currentCurrent that flows in one direction, although its magnitude need not always remain constant.A cell-powered school circuit is commonly modelled using direct current; state any constant-current assumption separately.
82. CellAn electrical source that transfers energy from a chemical store to the circuit.A cell supplies energy; it does not continuously manufacture the electrons already present in metal wires.
83. BatteryTwo or more cells connected together in the usual school circuit terminology.Identify the arrangement from the circuit symbol, while recognising that everyday speech may call one cell a battery.
84. Closed circuitA complete conducting path through which current can flow when driven by a source.A closed switch completes a path; whether a component carries current still depends on the connections.
85. Open circuitA circuit containing a break that prevents current through the broken path.An open switch stops current in that branch, but another parallel branch may still form a complete path.
86. Series circuitA circuit or arrangement in which components lie along one path for the current.In a simple series loop, the current through each component is the same.
87. Parallel circuitAn arrangement with branches connected across the same pair of junctions.Parallel branches have the same potential difference, while their currents can differ if their resistances differ.
88. JunctionA point in a circuit where conducting paths meet or separate.At a steady junction, total current entering equals total current leaving because charge is conserved.
89. AmmeterAn instrument used to measure current through a circuit path.Show an ammeter in series with the component whose current is being measured in a paper circuit diagram.
90. VoltmeterAn instrument used to measure potential difference between two points.Show a voltmeter connected across a component, since its reading compares the two terminals.
Terms 81–90: Read and measure a direct-current circuit

91–100: Electrical energy, power and protection

Word or termMeaningExample or use
91. Electrical powerThe rate of energy transfer by an electrical device or component.A power of 6 W means 6 J is transferred each second under the stated operating conditions.
92. Electrical energyEnergy transferred electrically between stores or through circuit components.Electrical energy is transferred in a lamp while charge continues around the circuit; charge is not used up.
93. Kilowatt-hourAn energy unit equal to the energy transferred by one kilowatt of power in one hour.A 0.4 kW device used for three hours transfers 1.2 kWh; kilowatt-hour is not a power unit.
94. Power ratingA stated power value for a device under specified operating conditions.Read the conditions with the rating; an appliance does not necessarily draw the stated power continuously in every mode.
95. FuseA protective device containing a link that melts and opens a circuit when excessive current persists sufficiently.A fuse protects against excessive current; its presence is not permission to touch a live conductor.
96. Circuit breakerA protective device that opens a circuit automatically when its specified fault condition is detected.An overcurrent circuit breaker interrupts excessive current and differs from a simple manually operated switch.
97. Earth wireA protective conductor connecting exposed metal parts to earth in equipment designed for earthing.A fault can send current along this protective path so an appropriate protective device disconnects the supply.
98. Live wireThe supply conductor at a significant alternating potential relative to earth in a mains circuit.A paper diagram places the protective interruption in the live connection; this is not an instruction to rewire equipment.
99. Neutral wireThe conductor providing the normal return path in the relevant mains supply arrangement.Neutral is different from earth and should never be treated as safe to touch merely because of its name.
100. Double insulationProtection using two independent insulating barriers or equivalent reinforced insulation between live parts and accessible surfaces.Equipment designed with this protection does not rely on a protective earth connection to its casing.
Terms 91–100: Electrical energy, power and protection

Contents · Previous chapter · Next chapter

CHAPTER 3 OF 10

3. Explain heating without treating heat as a substance

Back to contents

Two samples of the same liquid at the same temperature have the same average particle kinetic energy in the simple model. However, a larger sample contains more particles. Equal temperature therefore does not establish equal total internal energy. A thermometer measures temperature, not the entire energy store.

A warm metal spoon in cooler surroundings can transfer energy by several processes. Conduction involves material interactions; convection involves moving fluid; radiation involves electromagnetic waves. These can occur together. Identify the part of the situation being explained rather than insisting that only one process can exist.

A precise convection explanation names the fluid and the change: a region of fluid warms, usually expands and becomes less dense than the surrounding cooler fluid; it rises while cooler fluid moves into its place. This describes the ordinary situations used here, without claiming that every substance expands in every temperature range. “Heat rises” leaves out both the fluid and the reason for movement.

Contents · Previous chapter · Next chapter

CHAPTER 4 OF 10

4. Read the axes before reading the wave

Back to contents

A displacement–distance graph is a snapshot of different positions at one moment. It can show wavelength. A displacement–time graph follows a point through time. It can show period. The curves may look similar, but the horizontal axes answer different questions. Always write the horizontal quantity and its unit before measuring a separation between peaks.

For a simple periodic wave, frequency and period are reciprocal: f = 1/T. Wave speed follows v = fλ, where λ is wavelength. A higher frequency does not automatically mean a higher wave speed. If speed remains constant, increasing frequency makes wavelength shorter. State which quantity is fixed before describing a relationship.

For electromagnetic waves, the common speed in a vacuum is approximately 3.0 × 10⁸ m/s. Different spectrum regions have different frequencies and wavelengths. Their possible effects also depend on exposure conditions. Avoid using “radiation” as a synonym for either danger or radioactivity: ordinary visible light is electromagnetic radiation, while some radioactive emissions are particles.

Contents · Previous chapter · Next chapter

CHAPTER 5 OF 10

5. Separate charge, current, voltage and energy

Back to contents

Imagine charge passing through a lamp in a steady series circuit. The same amount per second enters and leaves the lamp. Energy is transferred as the charge passes through the component, but charge does not disappear. This explains why the current does not progressively decrease after each component in a simple series loop.

Current tells us charge per second: I = Q/t. Potential difference tells us energy transferred per charge: V = E/Q. Multiplying the two gives energy per second, so electrical power is P = VI. Over time t, a constant voltage and current transfer energy E = VIt. The units help explain why the relationships fit, instead of leaving four disconnected formulas to memorise.

In a parallel arrangement, branches share the same two connection points and therefore the same potential difference. Their currents depend on their resistances. A branch with a smaller resistance can carry a larger current at that voltage. At a junction, add the branch currents to obtain the total; do not add the branch voltages as though the branches were in series.

Contents · Previous chapter · Next chapter

CHAPTER 6 OF 10

6. Twelve worked practice tasks

Back to contents

These invented tasks are for reasoning on paper. Circuit calculations neglect wire and source internal resistance, with component values as given. Read the conditions and check that each answer’s unit matches the requested quantity.

1. Does equal temperature mean equal energy?

Task: A small and a large sample of the same liquid are both at 30°C. Must they have equal internal energy?

Answer: No. Their particles have the same average kinetic energy in the simple model, but the larger sample has more particles. Internal energy is a total quantity. The temperature alone does not establish equal total energy, and the comparison assumes the same substance and state.

2. Why can melting continue at constant temperature?

Task: A pure substance melts at constant pressure while receiving energy. Explain why its temperature can remain constant.

Answer: The transferred energy changes particle arrangement and the potential-energy part of internal energy during the change of state. The average kinetic energy does not increase, so temperature remains constant. Saying “no energy enters” contradicts the information; energy transfer does not always produce a temperature rise.

3. Interpret a cooling comparison

Task: Two otherwise comparable warm containers begin at 60°C in the same room. After five minutes, an insulated one is at 54°C and an uninsulated one at 47°C. What do the readings support?

Answer: The insulated container shows a smaller temperature decrease over the measured interval. Under the stated comparison, this supports the insulating layer reducing cooling. It does not show zero transfer: the insulated container also cooled. A fair comparison needs the same contents, starting conditions and measurement method.

4. Find frequency and period

Task: A point completes 24 oscillations in 6.0 s. Calculate its frequency and period.

Answer: Frequency is 24/6.0 = 4.0 Hz. Period is 6.0/24 = 0.25 s, or 1/f. The total time describes many cycles; it is not the period. A useful check is 4.0 cycles per second multiplied by 0.25 seconds per cycle, giving one.

5. Calculate wave speed with consistent units

Task: A wave has frequency 5.0 Hz and wavelength 8.0 cm. Find its speed.

Answer: Convert 8.0 cm to 0.080 m. Then v = fλ = 5.0 × 0.080 = 0.40 m/s. Using centimetres directly would give 40 cm/s, the same speed expressed differently. Writing 40 m/s after using 8.0 cm would mix units and change the result by a factor of one hundred.

6. Identify amplitude and the relevant axis

Task: A symmetric wave graph ranges from +3 mm to −3 mm. Adjacent crests are separated horizontally by 0.20 s. Find the amplitude and explain the crest separation.

Answer: Amplitude is 3 mm, measured from equilibrium, not the full 6 mm height. The horizontal unit is seconds, so 0.20 s is the period. It cannot be reported as a wavelength because wavelength is a distance.

7. Compare electromagnetic wavelengths

Task: Two electromagnetic waves travel through a vacuum. Wave B has twice the frequency of wave A. Compare their wavelengths.

Answer: Their speeds are equal. From λ = v/f, doubling frequency halves wavelength, so B has half A’s wavelength. This comparison relies on the shared propagation speed in the stated medium. It does not mean that every kind of wave always has the same speed.

8. Find charge from current

Task: A constant current of 150 mA passes a point for 40 s. How much charge passes?

Answer: Convert 150 mA to 0.150 A. Then Q = It = 0.150 × 40 = 6.0 C. The answer is an amount of charge. Neither amperes nor volts are suitable units for the final quantity requested.

9. Solve an ideal series circuit

Task: A 6.0 V source supplies two resistors, 4.0 Ω and 8.0 Ω, in series. Find the current and the voltage across each resistor.

Answer: Total resistance is 12 Ω, so I = V/R = 6.0/12 = 0.50 A. The voltage across 4.0 Ω is IR = 2.0 V; across 8.0 Ω it is 4.0 V. The current is the same through both, and the voltages add to the source’s 6.0 V.

10. Solve an ideal parallel circuit

Task: Resistors of 6.0 Ω and 3.0 Ω are connected in parallel across 6.0 V. Find the branch currents and total current.

Answer: Each branch has 6.0 V across it. Their currents are 6.0/6.0 = 1.0 A and 6.0/3.0 = 2.0 A. Total current is 3.0 A. The effective resistance is 6.0/3.0 = 2.0 Ω, smaller than either branch resistance because the parallel arrangement provides additional conducting paths.

11. Distinguish electrical power from energy

Task: An ideal component has 3.0 V across it and carries 0.20 A for 50 s. Calculate power and transferred energy.

Answer: P = VI = 3.0 × 0.20 = 0.60 W. Energy E = Pt = 0.60 × 50 = 30 J. Power describes the rate; energy describes the accumulated transfer over the interval. A longer operating time at the same power increases energy, not power.

12. Use kilowatt-hours and a fictional tariff

Task: A hypothetical device operates continuously at 0.50 kW for 2.0 h. At an invented rate of $0.30 per kWh, calculate energy and cost.

Answer: Energy is 0.50 × 2.0 = 1.0 kWh. Cost is 1.0 × $0.30 = $0.30. This is a made-up calculation rate, not a current Singapore tariff. If the device cycles off or changes power, its actual energy requires the relevant operating information.

Contents · Previous chapter · Next chapter

CHAPTER 7 OF 10

7. Repair the sentence as well as the calculation

Back to contents

“The battery sends voltage around the circuit.” Replace this with: “The source supplies energy to the circuit, and there is a potential difference between its terminals.” Current concerns charge passing per second. Voltage is a difference between points, so it should not be described as a substance flowing round the wire.

“The lamp uses up the current.” Replace this with: “Energy is transferred in the lamp, while the steady current through the series loop is the same.” Ask which quantity is conserved at a junction and which quantity is transferred in the component. This prevents the student from confusing charge with energy.

“A bigger amplitude means a higher frequency.” Replace this with: “Amplitude describes maximum displacement; frequency describes cycles per second.” A diagram or set of measurements must establish whether either changes. One can change without the other, so the connection cannot be assumed merely because a wave looks taller.

“An insulator stops all heat.” Replace this with: “The insulation reduces particular rates of energy transfer.” A design may limit conduction yet still lose energy through other paths. Describe the material, the path and the conditions before claiming an improvement, and use measured data when comparing actual designs.

Contents · Previous chapter · Next chapter

CHAPTER 8 OF 10

8. Make five terms usable each time

Back to contents

Choose a connected group rather than five random entries. For thermal work, explain temperature, internal energy, conduction, convection and radiation through one imagined cooling object. For waves, connect amplitude, wavelength, frequency, period and speed. For circuits, connect charge, current, potential difference, resistance and power. Drawing a small labelled diagram often exposes an unclear relationship.

Use three checks. First, explain the meaning without looking. Second, identify it in a diagram or numerical statement. Third, answer a changed question. A student who knows the definition of period but reads wavelength from a time axis needs graph practice. A student who selects Q = It correctly but uses milliamperes without conversion needs a unit check.

Keep a correction record with the original sentence, the repaired sentence and the reason for the change. Revisit the same idea using new numbers after another lesson. Count what the student can now explain or calculate independently, rather than only counting completed definitions. The routine should fit current homework and the school’s topic sequence.

Contents · Previous chapter · Next chapter

CHAPTER 9 OF 10

9. Help a student identify the next step

Back to contents

Ask the student to draw the situation and label what is measured. “What does this unit tell us?” can reveal more than immediately correcting a numerical answer. Give one prompt at a time and let the student complete the explanation.

If the concept is unclear, return to a simpler example. If the concept is sound but the graph is misread, work on the axes. If the model and method are sound but the answer is wrong, inspect substitution, conversion and arithmetic. This keeps support specific and avoids interpreting a single mistake as evidence that the entire subject is beyond the learner.

For the wider combination and general scientific language, continue with the Secondary 3 G2 Science Physics/Chemistry vocabulary guide. For this theme, the next useful step is one clear explanation: trace the energy, identify the measured quantity and state the condition that makes the answer correct.

Contents · Previous chapter · Next chapter

CHAPTER 10 OF 10

10. Official references and teaching scope

Back to contents

Checked on 16 November 2026. The definitions, examples, calculations and learning routine are original eduKate teaching material. The list is selective and does not replace school instructions or the complete applicable syllabus.

Contents · Previous chapter · Choose a reading route

Continue from here: Start Here · Tuition · Education · Pathways · Parenting 101 · All Site Routes

eduKate Punggol

Contact

83 Punggol Central, Singapore 828761

edu|Kate Bukit Timah

8 Fourth Avenue, Singapore 268674

By Appointment +65 8823 1234
admin@edukatesg.com

Email Us

When a child finally understands, school becomes less frightening and the future opens wider. Email us for the latest schedules and fees.

← 返回

感谢您的回复。 ✨