This Top 100 Secondary 3 G2 Vocabulary List for Punggol helps students read Science questions, explain ideas and use Physics and Chemistry terms accurately. It is designed around the Physics/Chemistry combination, with foundations to repair, language for current lessons and words to meet as the course progresses. The aim is practical: understand what a question means, choose the relevant scientific idea and give a clear answer. “Top 100” describes this teaching selection, not an official examination ranking.
Start with the words connected to your school’s current chapter. Read each meaning, cover it, explain the example aloud and then use the term in a fresh question. Parents can help by asking what changes, what stays the same and what evidence supports the answer. A three-student tutorial can use the same process: one student explains, another checks the scientific meaning and a third tests the explanation with a different example.
- Who this is for: Secondary 3 students taking Science at G2 and parents supporting their learning in Punggol.
- Combination: Physics and Chemistry, corresponding to the published K223 reference; Biology is outside this list’s selected combination.
- What you receive: exactly 100 numbered words and terms, organised into ten manageable groups, followed by worked examples and practice.
- How to use it: match the words to school lessons, repair missing foundations and revisit them through explanations and calculations.
- Honest scope: this is an eduKate teaching list, not a prescribed SEAB vocabulary list, predicted paper or complete syllabus checklist.
- Progress check: look for correct meaning, relevant evidence, accurate units and independent transfer to an unfamiliar question.
Contents
Scope and Physics vocabulary — chapters 1–6
Chemistry and scientific enquiry — chapters 7–11
Worked examples, practice and support — chapters 12–16
The SEAB 2027 G2 school-candidate index identifies K223 as Science (Physics, Chemistry). K224 and K225 are different combinations involving Biology. This guide uses the published 2027 G2 Science syllabus as a curriculum reference. Confirm the syllabus for your eventual examination year with your school; a Secondary 3 student reading this page is not automatically a 2027 examination candidate.
G2 describes the level of a subject. It does not describe a student’s intelligence, effort or entire subject combination. Under the SEC framework, students sit subjects at their respective levels. For learning decisions, bring the actual Science combination, current chapter and school assessment instructions into the conversation.
The order below is a teaching route. It is not a national timetable assigning every term to Secondary 3. Groups 1, 2, 6 and 7 contain foundations worth checking early. Groups 3 to 5 and 8 connect those foundations to larger explanations. Group 9 includes progression vocabulary that a school may teach later. Group 10 supports work throughout the course. Use your school’s teaching sequence to decide what needs attention this week.
Scientific vocabulary becomes useful when it changes how a student thinks. A student who understands “density” should know what two quantities to compare. A student who understands “ion” should recognise that an electrical charge is involved. A student who understands “explain” should connect an observation to a reason. The word is a tool for doing something, not just a sentence to copy into a notebook.
Begin here when calculations go wrong before the formula is used. Ask the student to name the quantity, identify its unit and describe what a measurement actually tells us. These questions reveal whether the difficulty lies in reading, measurement or calculation.
| Word or term | Meaning | Example or use |
|---|---|---|
| 1. Physical quantity | A property that can be measured and expressed using a numerical value and a unit. | Length, mass and time are quantities. “The length is 25 cm” states both a value and a unit. |
| 2. SI unit | A unit within the International System of Units, which provides shared standards for measurements. | The metre, kilogram and second let measurements from different investigations be compared consistently. |
| 3. Scalar | A quantity described by magnitude alone, without a direction being necessary to specify it. | A speed of 4 m/s is a scalar measurement. It does not say which way the object travels. |
| 4. Vector | A quantity that needs both magnitude and direction for a complete description. | A force of 6 N to the right includes the size of the force and its direction. |
| 5. Magnitude | The size of a quantity, considered separately from its direction. | Two forces can each have a magnitude of 5 N while acting in opposite directions. |
| 6. Precision | The closeness of repeated measurements to one another when the same quantity is measured. | Closely grouped repeated readings suggest good precision, although they could all be displaced by an instrument error. |
| 7. Accuracy | The closeness of a measurement to the true or accepted reference value. | A balance reading close to a known reference mass is accurate for that measurement. |
| 8. Zero error | A non-zero instrument reading when the quantity being measured should be zero. | If an empty balance reads 2 g, check and correct its zero before relying on subsequent mass measurements. |
| 9. Density | The mass of a substance per unit volume: density equals mass divided by volume. | A 60 g block with a volume of 20 cm³ has a density of 3 g/cm³. |
| 10. Pressure | The normal force acting per unit area of a surface. | The same downward force over a smaller contact area produces greater pressure on the surface. |
A useful correction is to separate everyday impressions from measured comparisons. “This object feels heavy” gives little information about density unless its volume is considered. A large object can have a lower density than a smaller object. Encourage a sentence containing both mass and volume before the student makes the comparison.
Movement questions often require students to connect a sentence, a diagram, a graph and a calculation. Keep the direction of motion visible. When reading a graph, name both axes before interpreting its shape; the same-looking line can represent different relationships.
| Word or term | Meaning | Example or use |
|---|---|---|
| 11. Distance | The total length of the path travelled, regardless of direction. | Walking 30 m forward and 10 m back covers a total distance of 40 m. |
| 12. Displacement | The change in position from start to finish, including its direction. | The same forward-and-back walk leaves the walker 20 m from the starting position in the original direction. |
| 13. Speed | The rate at which distance is travelled. | Covering 24 m in 6 s gives an average speed of 4 m/s. |
| 14. Velocity | The rate of change of displacement; it includes direction. | “4 m/s east” describes velocity more completely than “4 m/s” on its own. |
| 15. Acceleration | The rate of change of velocity. | In one-dimensional motion, velocity increasing uniformly from +2 m/s to +8 m/s in 3 s gives an acceleration of +2 m/s². |
| 16. Uniform motion | Motion with constant velocity: unchanged speed and unchanged direction. | An object moving along a straight track at a steady speed is in uniform motion. |
| 17. Gradient | The change in the vertical-axis quantity divided by the corresponding change in the horizontal-axis quantity. | On a distance–time graph, a steeper rising straight line represents a greater constant speed. |
| 18. Resultant force | The single force representing the combined effect of all the forces acting on an object. | Forces of 9 N right and 4 N left give a resultant force of 5 N right. |
| 19. Mass | A measure of the amount of matter in a body, commonly measured in kilograms. | A 2 kg object still has a mass of 2 kg when moved to a different gravitational environment. |
| 20. Weight | The gravitational force acting on a body, measured in newtons. | Where gravitational field strength is 10 N/kg, an object of mass 2 kg has a weight of 20 N. |
“The graph goes up, so the object accelerates” is incomplete reasoning. A rising straight line on a distance–time graph can show constant speed. A rising straight line on a speed–time graph can show constant acceleration. The student must identify what is changing and how quickly it changes. Reading the axes is part of understanding the vocabulary.
These words help students describe where energy comes from, where it goes and how quickly it is transferred. Avoid treating energy as something that simply vanishes when it becomes less useful. Name the transfer and, when relevant, the receiving surroundings.
| Word or term | Meaning | Example or use |
|---|---|---|
| 21. Energy | A quantity that can be transferred between objects or systems and is conserved overall. | A moving trolley can transfer energy when it collides with another object. Energy is measured in joules. |
| 22. Work done | Energy transferred when a force moves an object through a displacement in the force’s direction. | A constant 5 N force moving an object 3 m in that direction does 15 J of work. |
| 23. Kinetic energy | The energy an object has because it is moving. | For the same mass, increasing speed increases kinetic energy; the relationship depends on the square of speed. |
| 24. Gravitational potential energy | Energy associated with an object’s position in a gravitational field. | Lifting a book transfers energy into the book–Earth system as its height increases. |
| 25. Power | The rate of energy transfer, or work done per unit time. | Transferring 120 J in 4 s corresponds to an average power of 30 W. |
| 26. Efficiency | The useful energy output divided by the total energy input, often expressed as a percentage. | A device delivering 60 J of useful output from 100 J input has an efficiency of 60%. |
| 27. Energy transfer | The movement of energy between objects or systems through processes such as heating or electrical work. | A warmer cup transfers energy to its cooler surroundings until their temperatures approach equilibrium. |
| 28. Conservation of energy | The principle that energy is not created or destroyed, although it can be transferred or transformed. | A slowing trolley transfers energy to its surroundings; saying the energy disappeared misses the transfer. |
| 29. Temperature | A measurement of how hot or cold something is, used when comparing its thermal state. | Two containers can have the same temperature while containing different amounts of water and different total internal energies. |
| 30. Thermal equilibrium | A state in which objects in thermal contact have the same temperature and no net energy transfer by heating. | A thermometer must reach thermal equilibrium with its surroundings before its reading represents their temperature reliably. |
In an explanation, replace “the object has more heat” with the precise quantity you mean. Are you comparing temperature, internal energy or energy transferred by heating? These are different comparisons. A small hot object and a large warm object cannot be ranked by total internal energy from their temperatures alone.
Some words in this group may belong to later school chapters. Keep them as preparation when they are unfamiliar. For current work, focus on distinguishing the mechanism of a transfer from the observation that something became warmer, moved or produced a sound.
| Word or term | Meaning | Example or use |
|---|---|---|
| 31. Conduction | Energy transfer through a material by particle interactions, without bulk movement of the material. | Energy travels along a metal spoon from its warmer end towards its cooler end. |
| 32. Convection | Energy transfer associated with the bulk movement of a fluid. | Water warmed from below can expand, become less dense and rise while cooler water moves down. |
| 33. Radiation | Energy transfer by electromagnetic waves, which can travel through a vacuum. | Energy from the Sun can cross space before reaching Earth; no moving air is required along that path. |
| 34. Insulator | A material that transfers thermal energy or electric charge poorly, depending on the stated context. | A thermal insulator slows energy transfer by conduction; identify the context before using the word. |
| 35. Wave | A travelling disturbance that transfers energy without an overall transfer of the medium along with it. | A floating marker can move up and down while a water wave travels across the surface. |
| 36. Wavelength | The distance between consecutive points on a wave that are in the same phase. | Measure from one crest to the next crest, rather than from a crest to its neighbouring trough. |
| 37. Frequency | The number of complete oscillations or wave cycles passing a point each second. | A frequency of 5 Hz means five complete cycles occur each second. |
| 38. Amplitude | The maximum displacement of an oscillating point from its equilibrium position. | On a wave diagram, measure from the middle line to a crest, not from trough to crest. |
| 39. Transverse wave | A wave in which oscillations are perpendicular to the direction of energy transfer. | In a rope demonstration, the rope can move vertically while the disturbance travels horizontally. |
| 40. Longitudinal wave | A wave in which oscillations are parallel to the direction of energy transfer. | A compression travels along a spring while the coils oscillate backwards and forwards along its length. |
A drawing helps only when its labels carry meaning. Ask a student to mark the direction of wave travel separately from the direction of oscillation. If both arrows are drawn without explanation, return to a slow classroom demonstration or a teacher-provided diagram. The aim is to see which motion belongs to the disturbance and which belongs to the medium.
Electricity becomes clearer when charge, current, energy and potential difference remain separate ideas. Use a circuit diagram to identify the path and connections before attempting a calculation. This group can be revisited when the school reaches the corresponding chapter.
| Word or term | Meaning | Example or use |
|---|---|---|
| 41. Electric charge | A property of matter that can be positive or negative and produces electrical interactions. | Electrons carry negative charge. The coulomb is the SI unit used to measure an amount of charge. |
| 42. Current | The rate at which electric charge flows past a point. | A current of 2 A means 2 C of charge passes that point each second. |
| 43. Potential difference | The energy transferred per unit charge between two points in a circuit. | A potential difference of 3 V means 3 J is transferred for each coulomb of charge. |
| 44. Electromotive force | The energy supplied by a source per unit charge passing through it. | A cell supplies energy to charges; electromotive force is measured in volts despite the word “force”. |
| 45. Resistance | A measure of opposition to current, given by potential difference divided by current. | A component with 6 V across it and 2 A through it has a resistance of 3 Ω. |
| 46. Circuit | An arrangement of electrical components and connections through which current can flow when a complete path exists. | An open switch interrupts the conducting path, so current cannot flow through that broken branch. |
| 47. Series circuit | A circuit arrangement in which components lie on the same unbranched current path. | The same current passes through two lamps connected in series; current is not used up by the first lamp. |
| 48. Parallel circuit | A circuit arrangement with components connected across the same two points in separate branches. | Parallel branches share the same potential difference, while the current can divide between them. |
| 49. Conductor | A material that allows electric charge to move through it readily in an electrical context. | Metals conduct because they contain mobile electrons; a plastic covering can provide electrical insulation. |
| 50. Electrical power | The rate at which electrical energy is transferred by a component or circuit. | For a component operating at 6 V and 2 A, electrical power is 12 W. |
The sentence “the lamp uses up current” should become “the lamp transfers electrical energy while charge continues around the circuit”. A correction should preserve the student’s useful observation that something is being supplied and transferred, while repairing the identity of that quantity. Circuit activities should use school-approved low-voltage apparatus under appropriate supervision; household mains equipment is not a practice resource.
This group provides a language for explaining why materials behave differently. Draw simple particle representations alongside the words. Distinguish the identity of a particle from the number of particles present, and distinguish the composition of a substance from its visible appearance.
| Word or term | Meaning | Example or use |
|---|---|---|
| 51. Element | A substance containing only one type of atom, identified by its proton number. | Oxygen gas is an element even though its particles commonly contain two oxygen atoms joined together. |
| 52. Compound | A substance containing atoms of different elements chemically combined in fixed proportions. | Water contains hydrogen and oxygen chemically combined; its properties differ from those of the separate elements. |
| 53. Mixture | Two or more substances together without all of them being chemically combined into one substance. | Sand mixed with salt contains substances that retain their identities and can be separated using physical methods. |
| 54. Atom | A particle of an element containing a nucleus and electrons; an uncharged atom has equal proton and electron numbers. | A neutral atom with 11 protons contains 11 electrons. Its proton number identifies its element. |
| 55. Molecule | An electrically neutral, discrete group of two or more atoms held together by covalent bonds. | An oxygen molecule contains two oxygen atoms; a water molecule contains atoms of two different elements. |
| 56. Ion | An atom or group of atoms carrying an overall electrical charge. | An atom that loses one electron forms an ion with one more positive charge than negative charge. |
| 57. Proton | A positively charged particle found in an atomic nucleus. | Changing the number of protons changes the identity of the element. |
| 58. Neutron | An electrically neutral particle found in an atomic nucleus. | Neutrons contribute to nucleon number but do not provide positive or negative electrical charge. |
| 59. Electron | A negatively charged particle found outside the nucleus. | Loss or gain of electrons changes an atom’s overall charge without changing its proton number. |
| 60. Nucleon number | The total number of protons and neutrons in the nucleus of an atom. | An atom with 12 protons and 13 neutrons has a nucleon number of 25. |
“Two atoms joined together” does not automatically mean a compound. Two oxygen atoms form an oxygen molecule, which still contains one element. To decide whether a substance is a compound, ask whether different elements are chemically combined. This small distinction prevents several later mistakes about formulae, bonding and mixtures.
Students need to explain both what particles are and how they are arranged. Separation questions add another demand: identify a difference in physical properties that makes the method suitable. Naming an apparatus without explaining its purpose leaves the reasoning unfinished.
| Word or term | Meaning | Example or use |
|---|---|---|
| 61. Proton number | The number of protons in an atom’s nucleus; it identifies the element. | Every carbon atom has proton number 6, even when the number of neutrons differs. |
| 62. Electronic configuration | The arrangement of electrons in the energy levels or shells of an atom or ion. | For a simple shell model, the arrangement 2,8,1 shows one electron in the outermost occupied shell. |
| 63. Ionic bond | The strong electrostatic attraction between oppositely charged ions. | Electron transfer can form ions; the attraction between those ions is the ionic bond. |
| 64. Covalent bond | A bond formed when atoms share a pair of electrons. | Two hydrogen atoms share a pair of electrons in a hydrogen molecule. |
| 65. Lattice | A regular, repeating arrangement of particles in a solid structure. | Solid sodium chloride has a giant lattice of alternating positive and negative ions. |
| 66. Solvent | The substance in which a solute dissolves to form a solution. | When salt dissolves in water, water acts as the solvent. |
| 67. Solute | The substance dissolved in a solvent to make a solution. | The dissolved salt is the solute, even though individual salt particles cannot be seen in the solution. |
| 68. Solution | A uniform mixture formed when a solute dissolves in a solvent. | A salt solution can look clear while still containing dissolved material. |
| 69. Filtration | A method for separating an insoluble solid from a liquid using a suitable filter. | Filtration can remove sand from water but cannot remove dissolved salt with ordinary filter paper. |
| 70. Distillation | A separation method involving vaporisation followed by condensation to collect a liquid. | Simple distillation can collect water from salt solution while the dissolved salt remains behind. |
“The salt disappeared” describes what the eye notices, but it does not explain dissolving. The salt remains present in the solution. Ask the student what could provide evidence for that claim in a supervised classroom investigation. Distinguishing visibility from presence helps with particle explanations throughout Chemistry.
A chemical equation records a change in substances. Its symbols should connect to a verbal explanation and, where appropriate, an observation. Formulae identify substances; coefficients tell us the relative numbers represented. Students need both kinds of information.
| Word or term | Meaning | Example or use |
|---|---|---|
| 71. Reactant | A starting substance that takes part in a chemical reaction. | In a reaction between magnesium and oxygen, both magnesium and oxygen are reactants. |
| 72. Product | A substance formed by a chemical reaction. | Magnesium oxide is the product when magnesium reacts with oxygen under suitable conditions. |
| 73. Chemical equation | A representation of a chemical reaction using formulae, symbols and appropriate relative amounts. | The equation 2Mg + O₂ → 2MgO represents the formation of magnesium oxide. |
| 74. Coefficient | A number written before a chemical formula to show its relative amount in an equation. | The 2 before H₂O represents two water molecules in a particle interpretation; it does not change water’s formula. |
| 75. State symbol | A label showing the physical state of a substance in a chemical equation. | The symbol (aq) means dissolved in water; it does not mean that the substance itself is liquid. |
| 76. Acid | A substance that produces hydrogen ions in aqueous solution. | An acidic solution contains hydrogen ions that can react with hydroxide ions during neutralisation. |
| 77. Alkali | A soluble base that produces hydroxide ions in aqueous solution. | Sodium hydroxide solution is alkaline because hydroxide ions are present in the aqueous solution. |
| 78. Neutralisation | An acid–base reaction; for an acid reacting with an alkali, hydrogen and hydroxide ions combine to form water. | The ionic equation H⁺ + OH⁻ → H₂O shows the central change in an acid–alkali reaction. |
| 79. pH | A scale used to describe how acidic or alkaline an aqueous solution is. | At 25°C, an aqueous solution is acidic below pH 7, neutral at pH 7 and alkaline above pH 7. |
| 80. Salt | An ionic compound formed when an acid’s hydrogen ions are replaced by metal ions or ammonium ions. | Sodium chloride is one salt; the word does not refer only to the table salt used in food. |
When balancing an equation, change coefficients rather than the subscripts inside a correct formula. Turning H₂O into H₂O₂ creates a formula for a different substance; it does not balance water. Count each element before and after your change. This is vocabulary becoming a checking procedure.
Use this group as a bridge into the corresponding school chapters. Students who have not yet studied organic chemistry can first learn how the examples connect, then return to detailed structures when taught. Recognition today does not need to become mastery of an entire later chapter tonight.
| Word or term | Meaning | Example or use |
|---|---|---|
| 81. Periodic table | An arrangement of elements in increasing proton number that makes recurring patterns easier to recognise. | Use an element’s position together with its electronic configuration when explaining a chemical pattern. |
| 82. Group | A vertical column of elements in the periodic table. | Elements in a group can share chemical similarities linked to their outer-shell electron arrangements. |
| 83. Period | A horizontal row of elements in the periodic table. | Moving across a period means moving through elements with increasing proton numbers. |
| 84. Reactivity | The tendency of a substance to undergo a chemical reaction under particular conditions. | Compare metals using observations from reactions performed under comparable conditions, not their brightness or appearance. |
| 85. Alloy | A mixture containing a metal and at least one other element. | Brass contains copper and zinc; an alloy is not automatically a compound with a single fixed formula. |
| 86. Corrosion | The gradual chemical deterioration of a material through reactions with its surroundings. | Rusting is a particular form of corrosion involving iron, oxygen and water. |
| 87. Hydrocarbon | A compound containing only carbon and hydrogen atoms. | Methane is a hydrocarbon. A compound containing oxygen as well is not a hydrocarbon. |
| 88. Saturated hydrocarbon | A hydrocarbon whose carbon atoms are joined only by single bonds. | Ethane is saturated; its carbon–carbon bond is single rather than double. |
| 89. Polymer | A large molecule built from many smaller units joined together. | Poly(ethene) consists of long chains produced by joining many ethene molecules during polymerisation. |
| 90. Monomer | A small molecule that can join with others to form a polymer. | Ethene is the monomer used to make poly(ethene); distinguish the starting molecule from the resulting chain. |
The names in this group carry useful relationships. “Monomer” and “polymer” belong together, but they describe different scales and structures. “Group” and “period” both locate elements, but they point in different directions. Make a simple annotated sketch before attempting to memorise a longer explanation.
These terms help students decide what an answer must do. The Science syllabus includes a glossary of examination instructions, while noting that meaning depends partly on context. The explanations below are teaching paraphrases. Read the whole question and its supplied information before choosing the shape of your response.
| Word or term | Meaning | Example or use |
|---|---|---|
| 91. Observation | Something noticed or measured during an investigation. | “Bubbles appeared” records an observation. Identifying the gas requires further evidence. |
| 92. Inference | A conclusion drawn by combining evidence with relevant understanding. | A student may infer that gas formed, then propose a suitable test to investigate its identity. |
| 93. Variable | A factor that can have different values or conditions in an investigation. | Water temperature, volume and stirring time could each be variables in a dissolving investigation. |
| 94. Control variable | A relevant factor kept the same so that a comparison is meaningful. | Keep the water volume unchanged when investigating how temperature affects dissolving time. |
| 95. Independent variable | The factor deliberately changed to investigate its effect. | If water temperature is deliberately changed between trials, temperature is the independent variable. |
| 96. Dependent variable | The outcome measured or observed in response to the changed factor. | If the time taken to dissolve is recorded, dissolving time is the dependent variable. |
| 97. Hypothesis | A proposed explanation or relationship that can be investigated using evidence. | A prediction about warmer water and dissolving time can be tested using a controlled investigation. |
| 98. Describe | Give the relevant features, observations or pattern requested by the question. | For a graph, describe which quantity rises or falls and identify changes in the pattern. |
| 99. Explain | Connect an observation or claim to scientific reasons that answer the question. | Explain convection by connecting heating, expansion, density change and the movement of the fluid. |
| 100. Deduce | Reach a conclusion by connecting the information supplied with appropriate scientific understanding. | Use a stated pattern and relevant principles to work out a result that was not directly given. |
A vocabulary test might ask what “dependent variable” means. A stronger check asks the student to identify it in a new investigation and explain how it would be measured. The second task reveals whether the term remains usable when the wording and context change.
Example 1: density requires both mass and volume
In a fictional classroom task, block A has a mass of 90 g and volume of 30 cm³. Block B has a mass of 80 g and volume of 20 cm³. A student says, “A is denser because it is heavier.” The student has compared mass alone. Calculate each density: A is 90 ÷ 30 = 3 g/cm³; B is 80 ÷ 20 = 4 g/cm³. B is denser even though its total mass is smaller.
The repaired explanation is: “B has more mass per unit volume.” Notice that the words match the calculation. To check understanding, change B’s volume to 40 cm³ while retaining its mass. The student should recalculate rather than preserve the previous answer simply because B was denser before.
Example 2: a faster task means greater power, not necessarily more energy
Two fictional motors each transfer 240 J of useful energy. Motor A takes 6 s, while motor B takes 12 s. Their average useful powers are 240 ÷ 6 = 40 W and 240 ÷ 12 = 20 W. Both transfer the stated amount of useful energy. A transfers it at twice the rate.
“A produces twice the energy” is therefore unsupported by these figures. The accurate comparison concerns power. We also cannot determine either motor’s efficiency without knowing its total energy input. A well-read question prevents the student from calculating a quantity for which the necessary information has not been supplied.
Example 3: an ion’s charge does not change its element
Suppose a particle has 11 protons and 10 electrons. Each proton contributes one positive elementary charge, and each electron contributes one negative elementary charge. The particle has one more positive charge than negative charge, so its overall charge is +1. It is an ion. Its proton number remains 11.
A frequent wrong answer is that the particle must have become a different element because it lost an electron. Repair this by separating two questions: proton number identifies the element; the balance between proton and electron numbers determines the overall charge. Ask the student to state both results before writing the symbol.
Example 4: describe the observation, then explain the process
Imagine a teacher demonstrates convection using approved classroom apparatus and warm water. An observation might be that the coloured water rises above the warmed region. An explanation connects the steps: the warmed water expands, its density decreases relative to the surrounding cooler water, and it rises while cooler water moves into its place.
“Heat rises” skips the moving material and the density comparison. In this demonstration, water moves and carries energy with it. Radiation does not require warm matter to rise. The correction therefore improves both the present answer and the student’s ability to distinguish thermal-transfer mechanisms in a later question.
Attempt these without looking back at the tables. Write the reasoning, not only the final word. These are original teaching exercises, not past examination questions or predictions. A parent can read the question and ask for an explanation without needing to provide the explanation first.
Practice 1: a hypothetical walk near the waterway
A student walks 50 m along a straight path, then returns 20 m along the same path. What are the distance travelled and displacement? Answer: distance is 50 + 20 = 70 m. Displacement is 30 m in the original direction. Distance adds the path lengths; displacement compares the finishing position with the starting position. The location is illustrative and does not describe a measured Punggol route.
Practice 2: identify the graph before describing motion
An object moves along a straight line in one direction. Its distance–time graph is a straight line from 0 m at 0 s to 18 m at 6 s. Is the object accelerating? Answer: no. Its speed is constant at 18 ÷ 6 = 3 m/s, and its direction remains unchanged, so its velocity is constant. The constant gradient shows a constant rate of increase of distance. A speed–time graph with an upward slope would require a different interpretation.
Practice 3: distinguish energy and efficiency
A device receives 500 J of energy and transfers 350 J as the intended useful output. Calculate its efficiency and account for the remaining energy. Answer: efficiency is 350 ÷ 500 × 100% = 70%. The remaining 150 J is transferred into other forms or surroundings rather than the intended useful output. It has not been destroyed. The exact transfers would depend on the device and the information in the question.
Practice 4: choose a separation method
A mixture contains sand, salt and water, and all the salt has dissolved. Can ordinary filtration separate both solids from the water? Answer: filtration removes the insoluble sand, while dissolved salt passes through with the water. Collecting water from the resulting salt solution requires an appropriate method such as simple distillation. The choice depends on whether the required product is water, salt or both; identify that goal before naming the method.
Practice 5: count particles and charge
A particle contains 12 protons, 12 neutrons and 10 electrons. State its proton number, nucleon number and overall charge. Answer: proton number is 12; nucleon number is 12 + 12 = 24; overall charge is +2. Electrons do not count towards nucleon number. Neutrons contribute no electrical charge. This question checks three separate definitions, so a student should show which particles belong in each calculation.
Practice 6: repair an equation
A student writes H₂ + O₂ → H₂O and tries to balance it by changing the product to H₂O₂. Explain the problem and give the balanced equation for forming water. Answer: H₂O₂ represents a different substance. Keep the correct formula for water and change coefficients: 2H₂ + O₂ → 2H₂O. Both sides now represent four hydrogen atoms and two oxygen atoms. Conservation applies to the atoms, not to an identical number of molecules on each side.
Practice 7: explain a circuit statement
Two lamps are connected in series. A student claims that less current reaches the second lamp because the first lamp uses some up. What needs correction? Answer: the same current flows through components on the same unbranched series path in a steady circuit. The lamps transfer electrical energy; they do not consume the charge flowing through them. Distinguishing current from energy repairs the statement without denying that the lamps require an energy supply.
Practice 8: identify variables in an investigation
A class investigates how water temperature affects the time taken for a fixed mass of salt to dissolve. What should it change, measure and keep consistent? Answer: change the water temperature; measure the dissolving time. Keep relevant factors such as water volume, salt mass, particle size and stirring procedure consistent. Define how the class decides that dissolving is complete. Otherwise, different students may record different endpoints even when they observe the same process.
Begin with one recent answer. Ask the student to read the question aloud and underline the quantity, process or instruction that matters. Then ask for an explanation without numbers. If the explanation is sound but the arithmetic fails, practise the calculation. If the explanation confuses the quantities, return to the definitions and a small contrasting example.
Use three observations to choose support. A student who cannot recognise the term needs a concrete example and plain meaning. A student who recognises it but misuses it needs contrasts, such as mass versus weight. A student who uses it correctly in familiar work but struggles elsewhere needs a new context with the same underlying relationship. These starting points call for different tasks.
A parent does not need to deliver a second Science lesson at home. Useful prompts include “What does that unit measure?”, “Which particle changed?”, “What did you observe?” and “Which step explains why it happened?” Allow the student time to answer. If the explanation remains uncertain, record the precise question for the teacher or tutor instead of turning the discussion into a dispute over effort.
A manageable four-week vocabulary routine
Week 1: choose ten terms from the current school chapter and five foundation terms supporting it. For each, record a meaning, an example and one confusion to avoid. Keep the list small enough that the student can explain it without reading every line.
Week 2: revisit those terms through short questions. Change a number, direction, substance or graph. Ask which scientific relationship remains the same. Add a few new words only when the earlier ones are becoming usable; finishing every row is less valuable than understanding the relevant rows.
Week 3: combine words in an explanation or calculation. A density answer should connect mass, volume, division and units. A particle answer should connect proton number, electron number and charge. Correct one precise weakness at a time and ask the student to explain the correction.
Week 4: use an unfamiliar but accessible task without the word list. Review the first point where reasoning became uncertain. Keep a short record: “I confused energy with power; I now check whether time is involved.” That record gives the next lesson a useful starting point.
A three-student setting creates opportunities for each learner to speak, draw and calculate. The benefit depends on how the lesson is organised. A small class still needs accurate explanations, suitable tasks and feedback on individual reasoning. Class size alone does not establish that a student has understood.
For a sample vocabulary activity, give all three students the same fictional density problem. The first student explains the quantities and formula. The second checks the calculation and units. The third challenges the conclusion by changing one value. Rotate the roles so that every learner explains, checks and transfers the idea. The tutor then asks each student to complete a related question independently.
A Chemistry activity can use three particle diagrams. One student identifies the substances, another justifies the classification, and the third explains why an alternative label would be wrong. The tutor listens for the exact point of confusion: different atoms, different molecules, electrical charge or physical mixing. The correction should address that point directly.
For families considering small groups tuition in Punggol, bring a current worksheet and ask how the teaching will connect vocabulary with the child’s actual Science combination and school sequence. Ask how independent understanding will be checked after discussion. This is more informative than counting how many difficult words appear on a worksheet.
The next useful step is modest: choose five words that affected a recent answer, explain each through an example, and try one new question. Scientific confidence grows when a student can see what a word helps them do. This list should support that progress throughout the course, with earlier foundations revisited whenever they are needed.
Curriculum references checked on 16 November 2026. This page provides original eduKate explanations, examples and practice. It is not issued or endorsed by MOE or SEAB. The official documents and the student’s school instructions remain the references for the applicable syllabus and assessment arrangements.
- SEAB: 2027 SEC G2 syllabuses for school candidates — subject names and codes.
- SEAB: 2027 G2 Science syllabus, K223/K224/K225 — Physics and Chemistry curriculum reference and glossary of instructions.
- SEAB: Secondary Education Certificate — subjects and subject levels under the SEC.

