Top 100 Secondary 2 G3 Mathematics vocabulary for Punggol students: learn the language of geometry, measurement and right-angled trigonometry through clear meanings, worked examples and focused practice. This guide explains how to recognise corresponding sides, identify the hypotenuse, choose sine, cosine or tangent, and distinguish perpendicular height from slant height. Students can use one ten-word group at a time alongside the chapter their school is teaching.
Accurate geometry begins with understanding what the question states. The 100 terms below are an eduKate teaching selection, not an official MOE or SEAB word list. They combine earlier foundations with Secondary 2 G3 content so that students can connect vocabulary to mathematical decisions. Parents can use the diagnostic questions and corrected examples to see whether a difficulty concerns language, a diagram, a formula or calculation before choosing the next learning step.
- Who this helps: Secondary 2 students taking Mathematics at G3 level and parents supporting their learning in Punggol.
- What to learn: 100 terms with plain meanings and original examples, arranged in ten practical groups.
- What to practise: matching figures, using scale, explaining Pythagoras, selecting trigonometric ratios and measuring solids.
- How to check progress: explain the condition for a method, solve a fresh example and label the answer with suitable units.
- How to plan: follow the school’s current chapter sequence and assessment instructions; use this guide to support understanding.
Contents
Understand the scope and find the vocabulary
Apply the vocabulary in learning
- A short diagnostic before practising more questions
- Match corresponding parts before using a scale factor
- Pythagoras: identify the condition and the unknown
- Choose sine, cosine or tangent from the known sides
- Choose the right measurement for cones, pyramids and spheres
- Practice questions with explained answers
- How a three-student lesson can build independent explanations
Parents, questions and official references
Jump to a ten-word group
- Geometric objects and positions
- Angles and angle relationships
- Triangles and their properties
- Congruence and careful matching
- Similarity and scale
- Pythagoras and right-angle checks
- Trigonometry in right-angled triangles
- Measuring plane figures
- Solids and their measurements
- Instructions, conditions and accuracy
CHAPTER 1 OF 12 · Understand and learn
1. What Secondary 2 G3 students need to understand
The MOE G2 and G3 Mathematics syllabuses place congruence and similarity, Pythagoras’ theorem, acute-angle trigonometric ratios in right-angled triangles, and the volume and surface area of pyramids, cones and spheres within G3 Secondary Two. Earlier geometry and measurement provide foundations. This guide identifies those foundations rather than treating every listed term as a new Secondary 2 requirement.
A school’s sequence is useful for organising revision. For example, Yishun Secondary School’s 2026 Secondary 2 G3 Mathematics outline includes similarity, Pythagoras, trigonometry and measurement of solids. It is one school’s plan, not a timetable for every school. Check your own teacher’s notes for the order, the assessed chapters and any required conventions.
G3 describes the level at which the subject is taken. The Singapore–Cambridge Secondary Education Certificate begins from 2027 as the graduating national examination framework. A Secondary 2 school test is not the same examination. This vocabulary guide does not prescribe a national Secondary 2 paper format, predict questions or promise a particular grade.
The most useful vocabulary is language that changes a decision. “Right-angled” tells you when Pythagoras applies. “Corresponding” tells you which sides to compare. “Perpendicular” distinguishes the height used for volume from a sloping length. “Total surface area” asks about exposed surfaces, whereas “volume” asks about space inside a solid. Learn each term with a sketch and a sentence explaining its use.
CHAPTER 2 OF 12 · Find the vocabulary
2. The 100-word geometry, measurement and trigonometry list
Read one group, cover the meaning column, and explain each term in your own words. Then change one measurement in an example and solve again. The first three groups largely reinforce earlier geometric language. Later groups connect these foundations to the selected Secondary 2 topics. A term is useful when you can recognise it in a question and act on it correctly.
Geometric objects and positions
| No. | Term | Meaning | Original example |
|---|---|---|---|
| 1 | Point | An exact position, represented by a dot and usually named with a capital letter. | Point A marks where the two paths meet in the mathematical sketch. |
| 2 | Line | A straight set of points extending indefinitely in both directions. | The drawn portion represents line AB; the mathematical line has no endpoints. |
| 3 | Line segment | The part of a straight line between two endpoints, with a measurable length. | Line segment PQ has endpoints P and Q and measures 8 cm. |
| 4 | Ray | Part of a line with one endpoint, extending indefinitely in one direction. | Ray OA begins at O and passes through A. |
| 5 | Vertex | A point where sides of a polygon meet, or where edges meet in a solid. | The vertex B is the middle letter when naming angle ABC. |
| 6 | Intersect | To meet or cross at a common point or set of points. | The two straight lines intersect at O, forming four angles. |
| 7 | Perpendicular | Meeting at a right angle of 90 degrees. | The height of the triangle is perpendicular to the line containing its base. |
| 8 | Parallel | Describing distinct straight lines in the same plane that never meet. | The arrows on the diagram show that AB and CD are parallel. |
| 9 | Diagonal | A line segment joining two non-adjacent vertices of a polygon. | A diagonal divides a rectangle into two congruent right-angled triangles. |
| 10 | Polygon | A closed plane figure whose boundary consists of straight line segments. | A pentagon is a polygon with five sides; a circle is not a polygon. |
Angles and angle relationships
| No. | Term | Meaning | Original example |
|---|---|---|---|
| 11 | Acute angle | An angle greater than 0 degrees and less than 90 degrees. | The 38-degree angle is acute, so acute-angle trigonometric ratios can describe it. |
| 12 | Right angle | An angle measuring exactly 90 degrees. | A small square marks the right angle between the floor and the vertical support. |
| 13 | Obtuse angle | An angle greater than 90 degrees and less than 180 degrees. | An interior angle of 124 degrees is obtuse. |
| 14 | Reflex angle | An angle greater than 180 degrees and less than 360 degrees. | The larger turn around the point is a reflex angle of 250 degrees. |
| 15 | Straight angle | An angle of 180 degrees, forming a straight line. | The two adjacent angles on the straight line add to a straight angle. |
| 16 | Complementary angles | Two angles whose measures add to 90 degrees. | Angles of 34 degrees and 56 degrees are complementary. |
| 17 | Supplementary angles | Two angles whose measures add to 180 degrees. | Angles of 72 degrees and 108 degrees are supplementary. |
| 18 | Vertically opposite angles | The opposite, equal angles formed when two straight lines intersect. | If one angle at the intersection is 63 degrees, its vertically opposite angle is also 63 degrees. |
| 19 | Corresponding angles | Angles in matching positions; for parallel lines cut by a transversal, matching angles are equal. | Two angles in matching corners are equal because the crossed lines are stated to be parallel. |
| 20 | Alternate angles | Angles at different intersections on opposite sides of a transversal, either both interior or both exterior; each alternate pair is equal when the lines are parallel. | The student states the parallel-line condition before using equal alternate interior angles. |
Triangles and their properties
| No. | Term | Meaning | Original example |
|---|---|---|---|
| 21 | Equilateral triangle | A triangle with three equal sides and three angles of 60 degrees. | The equilateral triangle has perimeter 21 cm, so each side is 7 cm. |
| 22 | Isosceles triangle | A triangle with at least two equal sides; the angles opposite those equal sides are equal. | The two equal sides meet at a 40-degree angle, leaving base angles of 70 degrees each. |
| 23 | Scalene triangle | A triangle with three different side lengths. | A triangle with sides 5 cm, 6 cm and 8 cm is scalene. |
| 24 | Right-angled triangle | A triangle containing one right angle. | The 5 cm, 12 cm and 13 cm triangle is right-angled because 5 squared plus 12 squared equals 13 squared. |
| 25 | Base | A selected side of a plane figure, or a selected face of a solid, used in a calculation. | For the triangle, choose the 10 cm side as the base and find its matching perpendicular height. |
| 26 | Perpendicular height | The shortest distance measured at right angles from a vertex to the relevant base line or base plane. | The pyramid has perpendicular height 4 cm, even though a sloping face has a longer height. |
| 27 | Interior angle | An angle inside a polygon between two neighbouring sides. | The three interior angles of a triangle add to 180 degrees. |
| 28 | Exterior angle | An angle outside a polygon between one side and an extension of an adjacent side. | The exterior angle of this triangle equals the sum of its two opposite interior angles. |
| 29 | Angle sum | The total of a specified set of angles. | Using the triangle angle sum, the missing angle is 180 minus 48 minus 67, which is 65 degrees. |
| 30 | Triangle inequality | The sum of any two side lengths of a triangle must exceed the third side length. | Lengths 2 cm, 3 cm and 6 cm cannot form a triangle because 2 plus 3 is less than 6. |
Congruence and careful matching
| No. | Term | Meaning | Original example |
|---|---|---|---|
| 31 | Congruent | Having exactly the same shape and size, even if position or orientation differs. | Two identical triangular cards remain congruent when one card is turned over. |
| 32 | Corresponding vertices | Vertices that match when two figures are compared in a stated order. | In the correspondence ABC to PQR, vertex B matches vertex Q. |
| 33 | Corresponding sides | Sides in matching positions in two figures. | If A matches P and B matches Q, side AB corresponds to side PQ. |
| 34 | Correspondence | A consistent matching between parts of two figures. | Write A to P, B to Q and C to R before comparing the triangle measurements. |
| 35 | Equal length | Having the same distance between endpoints, expressed in consistent units. | Segments of 0.4 m and 40 cm have equal length. |
| 36 | Equal angle | Having the same angle measure, regardless of the lengths of the drawn arms. | Both angles are 35 degrees, so they are equal even though one drawing is larger. |
| 37 | Superimpose | To place one figure over another to compare whether their boundaries and points coincide. | Move and turn the tracing to superimpose the congruent triangles. |
| 38 | Orientation | The direction or arrangement in which a figure is positioned. | A changed orientation does not by itself change the lengths or angles of a triangle. |
| 39 | Rotation | A turn about a fixed point through a specified angle. | Rotating a paper triangle preserves its side lengths and interior angles. |
| 40 | Reflection | A transformation producing a mirror image across a line. | A reflected triangle has the same shape and size as the original triangle. |
Similarity and scale
| No. | Term | Meaning | Original example |
|---|---|---|---|
| 41 | Similar | Having the same shape, with equal corresponding angles and proportional corresponding side lengths. | The triangles with side lengths 3, 4, 5 and 6, 8, 10 are similar. |
| 42 | Proportional | Related by the same multiplicative factor throughout the comparison. | Lengths 4, 6 and 8 are proportional to 6, 9 and 12 because each is multiplied by 1.5. |
| 43 | Scale factor | The ratio of an image length to the corresponding original length. | An original side of 8 cm becomes 12 cm, giving scale factor 12 divided by 8, or 1.5. |
| 44 | Enlargement | A scaling transformation; with a positive scale factor greater than 1, the image is larger. | At scale factor 3, a 2 cm side becomes 6 cm and the matching angles stay unchanged. |
| 45 | Reduction | A scaling in which the image is smaller, using a positive scale factor between 0 and 1. | A reduction with scale factor 0.4 changes a 15 cm side to 6 cm. |
| 46 | Map scale | A stated relationship between a distance on a map or plan and the corresponding real distance. | A scale of 1 to 200 means 1 cm on the plan represents 200 cm in reality. |
| 47 | Image | The figure obtained after a transformation. | The image of the rectangle has twice the original side lengths. |
| 48 | Original figure | The starting figure before a transformation is applied. | Divide the image length by the scale factor to recover the original figure’s matching length. |
| 49 | Ratio of lengths | A comparison of lengths expressed in the same units and a stated order. | The model-to-real ratio is 1 to 50, so the order cannot be reversed without changing its meaning. |
| 50 | Scale conversion | Changing between represented and actual measurements using the stated scale and suitable units. | At 1 to 200, a 3 cm plan length represents 600 cm, which is 6 m. |
Pythagoras and right-angle checks
| No. | Term | Meaning | Original example |
|---|---|---|---|
| 51 | Hypotenuse | The side opposite the right angle in a right-angled triangle; it is the longest side. | For legs of 9 cm and 12 cm, the hypotenuse is 15 cm. |
| 52 | Leg | Either of the two sides forming the right angle of a right-angled triangle. | If the hypotenuse is 13 cm and one leg is 5 cm, the other leg is 12 cm. |
| 53 | Square | The result of multiplying a number by itself; the word also names a four-sided shape with equal sides and right angles. | In Pythagoras’ theorem, the square of 7 is 49; it does not mean 7 multiplied by 2. |
| 54 | Square root | A number which, when multiplied by itself, gives the original number; the square-root symbol denotes the non-negative root. | The length satisfying x squared equals 81 is 9 cm because a length is positive. |
| 55 | Pythagoras’ theorem | In a right-angled triangle, the square of the hypotenuse equals the sum of the squares of the other two sides. | For perpendicular sides 6 cm and 8 cm, the hypotenuse squared is 36 plus 64. |
| 56 | Converse | A statement that reverses the condition and conclusion of another statement; it needs its own validity. | The converse of Pythagoras’ theorem allows 8 squared plus 15 squared equals 17 squared to establish a right angle. |
| 57 | Longest side | The side with the greatest length in a figure; only a right-angled triangle has a hypotenuse. | Use 10 cm as the candidate hypotenuse when testing a triangle with sides 6 cm, 8 cm and 10 cm. |
| 58 | Right-angle marker | The small square on a diagram indicating an angle of exactly 90 degrees. | The right-angle marker justifies applying Pythagoras to this triangle. |
| 59 | Sum of squares | An expression obtained by adding numbers or quantities after each has been squared. | The sum of squares 5 squared plus 12 squared is 25 plus 144, or 169. |
| 60 | Difference of squares | An expression obtained by subtracting one squared quantity from another. | The missing leg squared is 13 squared minus 5 squared, giving a difference of 144. |
Trigonometry in right-angled triangles
| No. | Term | Meaning | Original example |
|---|---|---|---|
| 61 | Reference angle | The chosen angle from which opposite and adjacent sides are identified. | Changing from one acute reference angle to the other exchanges the opposite and adjacent legs. |
| 62 | Opposite side | The side across from the chosen angle, with no endpoint at that angle. | In triangle ABC, the side opposite angle A is BC. |
| 63 | Adjacent side | In a right-triangle trigonometric ratio, the leg next to the chosen acute angle, excluding the hypotenuse. | The adjacent leg touches the reference angle but is not the longest side. |
| 64 | Sine | For an acute angle in a right-angled triangle, opposite side divided by hypotenuse. | If the opposite side is 5 and the hypotenuse is 13, sin θ equals 5 divided by 13. |
| 65 | Cosine | For an acute angle in a right-angled triangle, adjacent leg divided by hypotenuse. | If the adjacent leg is 12 and the hypotenuse is 13, cos θ equals 12 divided by 13. |
| 66 | Tangent | For an acute angle in a right-angled triangle, opposite side divided by adjacent leg. | If the opposite leg is 5 and the adjacent leg is 12, tan θ equals 5 divided by 12. |
| 67 | Trigonometric ratio | A ratio of selected side lengths linked to an angle. | Similar right-angled triangles have the same sine ratio for the same acute angle. |
| 68 | Inverse sine | The calculator operation used here to find an acute angle from its sine ratio. | In degree mode, inverse sine of 0.5 gives an angle of 30 degrees. |
| 69 | Inverse cosine | The calculator operation used here to find an acute angle from its cosine ratio. | Inverse cosine of 0.8 gives approximately 36.9 degrees, rounded to one decimal place. |
| 70 | Inverse tangent | The calculator operation used here to find an acute angle from its tangent ratio. | Inverse tangent of 1 gives 45 degrees when the calculator is in degree mode. |
Measuring plane figures
| No. | Term | Meaning | Original example |
|---|---|---|---|
| 71 | Perimeter | The total distance around the boundary of a plane figure. | A rectangle measuring 7 cm by 4 cm has perimeter 22 cm. |
| 72 | Area | The amount of two-dimensional space covered by a surface or region. | A triangle with base 10 cm and perpendicular height 6 cm has area 30 cm². |
| 73 | Radius | A line segment from the centre of a circle or sphere to its boundary, or that segment’s length. | A circle with diameter 14 cm has radius 7 cm. |
| 74 | Diameter | A line segment through the centre with endpoints on a circle or sphere, or its length. | The diameter is twice the radius, so a 3 cm radius gives a 6 cm diameter. |
| 75 | Circumference | The distance around a circle. | For radius 4 cm, the circumference is 8π cm. |
| 76 | Pi | The constant ratio of a circle’s circumference to its diameter, written π. | Use the calculator’s π key when a decimal answer is required, keeping extra digits until the final step. |
| 77 | Square unit | A unit of area based on a square whose side is one length unit. | One square metre equals 10,000 square centimetres, not 100 square centimetres. |
| 78 | Composite figure | A figure formed by combining simpler shapes, or by removing one shape from another. | Find the area of the L-shaped region by subtracting the missing rectangle from the outer rectangle. |
| 79 | Semicircle | Half a circle, with a straight diameter and a curved boundary. | The perimeter of a semicircle of radius 3 cm is 3π plus 6 cm. |
| 80 | Trapezium | A quadrilateral with a pair of parallel sides, used here with their perpendicular separation as the height. | For parallel sides 8 cm and 12 cm and height 5 cm, the trapezium’s area is 50 cm². |
Solids and their measurements
| No. | Term | Meaning | Original example |
|---|---|---|---|
| 81 | Volume | The amount of three-dimensional space occupied by a solid or enclosed by a container. | The cuboid’s volume is 5 times 4 times 3, or 60 cm³. |
| 82 | Surface area | The total area of the specified surfaces of a solid. | For an open container, calculate the material surfaces stated in the question rather than automatically adding a lid. |
| 83 | Prism | A solid with two congruent, parallel polygonal end faces and a constant matching cross-section between them. | The triangular prism has volume equal to its triangular cross-sectional area multiplied by its perpendicular length. |
| 84 | Cylinder | Here, a right circular solid with two congruent parallel circular ends and a curved surface. | A cylinder of radius 3 cm and height 8 cm has volume 72π cm³. |
| 85 | Pyramid | A solid with a polygonal base and triangular faces meeting at a common vertex. | A pyramid with base area 36 cm² and perpendicular height 4 cm has volume 48 cm³. |
| 86 | Cone | Here, a right circular solid with a circular base and a curved surface meeting at a vertex above the base centre. | A cone with radius 3 cm and perpendicular height 4 cm has slant height 5 cm. |
| 87 | Sphere | A solid bounded by a surface whose points are all the same distance from its centre. | A sphere with radius 3 cm has surface area 36π cm². |
| 88 | Net | A flat arrangement of surfaces that can be folded to form a solid’s surface. | A cylinder’s curved surface unfolds into a rectangle of width equal to the circular circumference. |
| 89 | Slant height | For a right cone, the vertex-to-rim distance along its surface; for a pyramid face, the face height perpendicular to its base edge. | Use the cone’s slant height for curved surface area and its perpendicular height for volume. |
| 90 | Cross-section | The plane shape formed when a solid is cut by a plane. | A cut parallel to the circular base of a cylinder produces a circular cross-section. |
Instructions, conditions and accuracy
| No. | Term | Meaning | Original example |
|---|---|---|---|
| 91 | Calculate | Find a numerical value using suitable mathematical operations and show useful working. | Calculate the volume, then state the answer with cubic units. |
| 92 | Determine | Find or establish a result using the information given. | Determine whether the triangle is right-angled by testing the squares of its side lengths. |
| 93 | Show that | Present a valid chain of reasoning leading to the stated result. | To show that the height is 12 cm, write the equation and calculation instead of copying 12 cm from the question. |
| 94 | Justify | Give mathematical reasons supporting a claim or step. | Justify equal angles by naming the relevant parallel lines and angle relationship. |
| 95 | Diagram not to scale | A warning that drawn lengths and angles are not reliable measurements of the actual figure. | Use the labelled lengths rather than measuring the printed picture with a ruler. |
| 96 | Exact value | A value expressed without rounding, sometimes using a square root or π. | The exact length is √13 cm; 3.61 cm is a rounded approximation. |
| 97 | Decimal place | A position to the right of the decimal point used to specify rounding accuracy. | Rounded to one decimal place, 8.46 cm becomes 8.5 cm. |
| 98 | Significant figure | A digit counted in expressing the precision of a number, beginning with the first non-zero digit. | Rounded to three significant figures, 0.004876 m becomes 0.00488 m. |
| 99 | Degree mode | A calculator setting that interprets or returns angles in degrees. | Check degree mode before calculating sin 30 degrees or an inverse trigonometric function. |
| 100 | Cubic unit | A unit of volume based on a cube whose edges are one length unit. | One cubic metre equals 1,000,000 cubic centimetres because all three dimensions are converted. |
CHAPTER 3 OF 12 · Understand and learn
3. A short diagnostic before practising more questions
Take a blank sheet and answer these five prompts without a formula list. Sketch a triangle and mark one right angle. Identify its hypotenuse. Explain why two differently sized rectangles might fail to be similar. State which height belongs in a cone’s volume formula. Finally, explain the difference between an answer in centimetres, square centimetres and cubic centimetres. These prompts reveal whether familiar words are attached to clear ideas.
Listen to the explanation, not only the final label. “The hypotenuse is the slanted side” is unreliable because a triangle can be rotated. “The hypotenuse is opposite the right angle” remains correct in every orientation. Similarly, “similar means they look alike” does not establish equal corresponding angles and proportional corresponding lengths. Ask the student to replace visual impressions with a relationship that can be checked.
For the rectangles, compare 4 cm by 6 cm with 6 cm by 9 cm. Both corresponding lengths are multiplied by 1.5, so the shapes are similar. Compare 4 cm by 6 cm with 6 cm by 8 cm instead: the multipliers are 1.5 and 4/3, so they are not similar. All four corners are right angles in both cases; equal angles alone do not establish similarity for every polygon.
Sort errors by what needs repairing. A student who identifies the correct sides but calculates 9 squared as 18 needs arithmetic repair. A student who calculates accurately but places the hypotenuse in the wrong position needs diagram interpretation. A student who uses the correct formula yet writes cm² for a volume needs a units check. The next practice should target that specific difficulty.
CHAPTER 4 OF 12 · Understand and learn
4. Match corresponding parts before using a scale factor
Suppose triangle ABC is similar to triangle PQR, with A corresponding to P, B to Q and C to R. Write the matching sides before substituting numbers: AB matches PQ, BC matches QR, and AC matches PR. The order of the names carries information. A rotated drawing can make visually nearby sides look like a pair even when the stated correspondence says otherwise.
If AB is 6 cm and PQ is 9 cm, the scale factor from ABC to PQR is 9/6 = 1.5. If BC is 8 cm, then QR is 8 × 1.5 = 12 cm. Check by writing PQ/AB = QR/BC = 1.5. Reversing direction changes the multiplier to 2/3. Label the direction so that “multiply or divide?” is answered by the comparison, not by guessing.
Congruence is more restrictive than similarity. Congruent figures have matching lengths as well as matching angles. Similar figures can differ in size. Turning or reflecting a card does not change its size; stretching only its width changes its shape. These physical comparisons help a student understand the vocabulary before applying it to diagrams. Use a tracing or cut-out only as an explanation, then practise stating the mathematical relationship in writing.
For a fictional classroom plan at scale 1:200, a 3 cm line represents 3 × 200 = 600 cm, or 6 m. The ratio compares lengths in the same units. Do not read it as 1 cm to 200 m. If an actual length is 8 m, first convert it to 800 cm, then divide by 200 to obtain a plan length of 4 cm.
Keep distance and area separate when reading a map. A rectangle drawn 2 cm by 3 cm at scale 1:200 represents a rectangle 4 m by 6 m, with area 24 m². Finding each actual dimension first gives a transparent check. Multiplying the drawn area by a distance multiplier only once would not account for both dimensions. Write units at every stage so the calculation remains understandable.
CHAPTER 5 OF 12 · Understand and learn
5. Pythagoras: identify the condition and the unknown
Pythagoras’ theorem applies to a right-angled triangle. If its perpendicular legs are a and b and its hypotenuse is c, then a² + b² = c². The labels themselves are not fixed: a worksheet may call the hypotenuse x or PQ. The geometric role determines the position in the equation. Circle the right-angle marker and identify the opposite side before choosing the formula.
For legs of 9 cm and 12 cm, write c² = 9² + 12² = 81 + 144 = 225. Therefore c = 15 cm. The answer is longer than both legs, as a hypotenuse should be. The square root is the step that returns from a squared length to a length. Leaving 225 cm as the final answer would confuse those quantities.
If the hypotenuse is 13 cm and one leg is 5 cm, the unknown leg satisfies x² + 5² = 13². Rearranging gives x² = 169 − 25 = 144, so x = 12 cm. Start with the full relationship rather than memorising “always add” or “always subtract”. Addition finds the square of the hypotenuse; subtraction finds the square of a missing leg.
The converse answers a different question: are three given sides the sides of a right-angled triangle? For 7 cm, 24 cm and 25 cm, compare the longest side squared with the sum of the other squares. Since 25² = 625 and 7² + 24² = 49 + 576 = 625, the triangle is right-angled. State the conclusion after the equality, so the reader sees what has been established.
For 6 cm, 7 cm and 10 cm, the check gives 36 + 49 = 85, which is not 100. The triangle is not right-angled. The longest side is still 10 cm, but calling it a hypotenuse would be incorrect. A longest side exists in many triangles; a hypotenuse belongs specifically to a right-angled triangle. This distinction prevents a common vocabulary error from becoming a calculation error.
When a length is √13 cm, keep that exact form if requested. If the task asks for two decimal places, write approximately 3.61 cm. In a longer calculation, retain the exact expression or calculator value until the final rounding step. An exact expression and a rounded decimal can describe the same length at different levels of precision, but they are not interchangeable in every instruction.
CHAPTER 6 OF 12 · Understand and learn
6. Choose sine, cosine or tangent from the known sides
Mark the chosen acute angle θ. First identify the hypotenuse, then the opposite side, then the adjacent leg. The hypotenuse is fixed by the right angle. Opposite and adjacent depend on which acute angle you are considering. If you switch reference angles, those two legs exchange roles. This is why memorising “vertical means opposite” is unreliable: the drawing may be rotated, and the chosen angle may change.
The ratios are sin θ = opposite/hypotenuse, cos θ = adjacent/hypotenuse, and tan θ = opposite/adjacent. Choose the ratio containing the known quantity and the requested quantity. If the adjacent leg and hypotenuse are involved, cosine is a direct route. A mnemonic can remind you of the ratios, but the labelled diagram is what makes the choice correct.
Consider a right-angled triangle with hypotenuse 10 cm and a 30-degree reference angle. The unknown opposite side x satisfies sin 30° = x/10. Since sin 30° = 0.5, x = 10 × 0.5 = 5 cm. The answer is shorter than the hypotenuse. In this example the angle, side relationship and numerical calculation all agree, providing three useful checks.
For a different triangle, let the adjacent leg be 8 cm and the reference angle be 35 degrees. The opposite leg x satisfies tan 35° = x/8. Thus x = 8 tan 35°, approximately 5.60 cm to three significant figures. Write the equation before using the calculator. It records the reason for the operation and makes a mistaken multiplication or division easier to find.
To find an angle, use an inverse operation. If the opposite leg is 5 cm and the adjacent leg is 12 cm, tan θ = 5/12. Therefore θ = tan⁻¹(5/12), approximately 22.6 degrees to one decimal place. Here tan⁻¹ denotes inverse tangent, not 1 divided by tangent. Use the appropriate inverse-function key and check that the calculator is in degree mode.
A useful check is to compare the legs. In the 5 cm and 12 cm example, the opposite leg is shorter than the adjacent leg, so the chosen acute angle is below 45 degrees. A result above 45 degrees suggests that the ratio or reference angle may have been reversed. Such checks do not replace the calculation; they help a student notice when the answer conflicts with the diagram.
This chapter uses acute angles in right-angled triangles. A triangle without an established right angle does not automatically permit these side-ratio equations. If a larger diagram contains several triangles, identify the particular right-angled triangle used for each step. A fresh small sketch of that triangle, with its given measurements, can prevent information from different parts of the diagram being combined incorrectly.
CHAPTER 7 OF 12 · Understand and learn
7. Choose the right measurement for cones, pyramids and spheres
Before writing a formula, decide whether the task asks for distance, covering area or enclosed volume. A ribbon around a shape involves length. Paper covering its exterior involves area. Space occupied by a solid involves volume. These interpretations help distinguish quantities that share the same numerical dimensions but require different operations and units. Read words such as closed, open, curved and total carefully.
For a right circular cone, volume = (1/3)πr²h, curved surface area = πrl, and total surface area = πrl + πr². Here r is the radius, h is the perpendicular height and l is the slant height. If r = 3 cm and h = 4 cm, Pythagoras gives l = 5 cm. The right triangle lies in a cross-section through the cone’s central axis.
The cone’s volume is (1/3) × π × 3² × 4 = 12π cm³. Its curved area is π × 3 × 5 = 15π cm², and its circular base area is 9π cm². The total area is therefore 24π cm². If a question asks only for the curved covering, adding the base would answer a different question. Label which surfaces are included before calculating.
A pyramid’s volume is one third of its base area multiplied by its perpendicular height. Consider a right square pyramid with its vertex directly above the centre of a 6 cm by 6 cm base and perpendicular height 4 cm. Its volume is (1/3) × 36 × 4 = 48 cm³. The word “right” and the stated vertex position explain the symmetrical arrangement used in the next calculation.
The slant height of each triangular face runs from the top vertex to the midpoint of a base edge. The horizontal distance from the base centre to that midpoint is 3 cm. Pythagoras therefore gives face slant height √(4² + 3²) = 5 cm. Each face has area (1/2) × 6 × 5 = 15 cm². Four faces total 60 cm²; including the base gives 96 cm².
The pyramid’s sloping edge from the top vertex to a corner of the base is a different length from the face slant height. The face height must be perpendicular to that face’s base edge. A sketch that marks the midpoint helps keep the two lengths separate. A student who uses 4 cm for every height may remember the volume formula yet misunderstand the surface-area diagram.
For a sphere, surface area = 4πr² and volume = (4/3)πr³. At radius 3 cm, the surface area is 36π cm² and the volume is 36π cm³. The numerical coefficients happen to match in this example, but the quantities and units differ. A radius of 6 cm would give 144π cm² and 288π cm³, making the distinction visible.
In a composite solid, count only the surfaces requested. If two solids are joined along flat faces, the joined faces may be internal rather than exposed. For volume, decide whether a part is added or removed. Sketch and label the components before combining formulae. The description of the object controls the calculation; the presence of two familiar shapes does not always mean adding both complete surface areas.
Unit conversion also depends on the quantity. Since 1 m = 100 cm, a square metre contains 100 × 100 = 10,000 cm². A cubic metre contains 100 × 100 × 100 = 1,000,000 cm³. For example, 0.25 m² equals 2,500 cm², while 0.25 m³ equals 250,000 cm³. Write the dimension explicitly instead of applying the length conversion to every measurement.
Try these questions before reading their answers. Draw your own diagram, state the relevant condition and keep units beside the quantities. The tasks are original teaching examples, not reproduced examination questions. If an answer is incorrect, identify the first step where the reasoning changed direction. Reworking that step is usually more useful than copying the whole solution several times.
- Matching sides: Triangles ABC and DEF are similar with A matching D, B matching E and C matching F. AB = 8 cm, DE = 12 cm and BC = 10 cm. Find EF.
- Scale: A fictional plan uses scale 1:250. A straight route measures 4.8 cm on the plan. Find its actual length in metres.
- Missing leg: A right-angled triangle has hypotenuse 17 cm and one leg 8 cm. Find the other leg.
- Testing a claim: A triangle has sides 9 cm, 12 cm and 16 cm. Is it right-angled? Show the comparison.
- Choosing a ratio: A right-angled triangle has an acute angle of 40 degrees and a hypotenuse of 15 cm. Find the adjacent leg to three significant figures.
- Finding an angle: Relative to an acute angle, the opposite and adjacent legs are both 7 cm. Find the angle.
- Cone: A right circular cone has radius 5 cm and perpendicular height 12 cm. Find its slant height, volume and total surface area in exact form.
- Units: Convert 0.08 m² to cm² and 0.002 m³ to cm³. Explain why the multipliers differ.
Answers 1 and 2: The scale factor from ABC to DEF is 12/8 = 1.5. Since BC corresponds to EF, EF = 10 × 1.5 = 15 cm. For the plan, 4.8 × 250 = 1,200 cm = 12 m. Both solutions require a direction of comparison; writing that direction protects against using the reciprocal factor accidentally.
Answers 3 and 4: The missing leg is √(17² − 8²) = √225 = 15 cm. For the second triangle, 9² + 12² = 225, while 16² = 256. The values are unequal, so the triangle is not right-angled. Do not silently replace the stated longest side of 16 cm with the familiar 15 cm from a different triangle.
Answers 5 and 6: Cosine connects the adjacent leg and hypotenuse, so x = 15 cos 40° = 11.5 cm to three significant figures. For the equal legs, tan θ = 7/7 = 1, hence θ = 45°. The other acute angle is also 45°. The triangle’s symmetry provides a useful independent check on the calculator result.
Answers 7 and 8: The cone’s slant height is √(5² + 12²) = 13 cm. Volume = (1/3)π × 25 × 12 = 100π cm³. Total surface area = π × 5 × 13 + π × 25 = 90π cm². The conversions are 800 cm² and 2,000 cm³. Area converts two dimensions; volume converts three, giving different multipliers.
CHAPTER 9 OF 12 · Understand and learn
9. How a three-student lesson can build independent explanations
In an illustrative three-student lesson, each learner receives the same rotated right-triangle diagram. One identifies the right angle and hypotenuse, another labels opposite and adjacent for a stated angle, and the third chooses and explains a ratio. The tutor then changes the reference angle and asks everyone to relabel the diagram independently. Rotating the roles prevents one confident student from doing all the thinking.
A second activity uses two cones with the same radius but different heights. Students decide which measurements belong in volume and which belong in curved area. They explain whether the slant height is given or must first be calculated. The tutor can see whether an error arises from reading, selecting a formula or evaluating it, and can offer a focused correction at that point.
Finish with a short individual transfer task using new numbers and a different orientation. A student who can repeat the group answer may still need help with an unfamiliar version. Record the explanation the student can now give: for example, “I identify the hypotenuse from the right angle before selecting the ratio.” This is more informative than recording only how many questions were completed.
For home revision, choose five words linked to the current school chapter. On one day, draw and explain them. On the next, answer two questions using them. Later in the week, mix them with earlier terms and revisit one corrected error. This is a suggested routine, not a compulsory timetable. Adjust its length to the student’s current workload and to what the practice reveals.
CHAPTER 10 OF 12 · Support and reference
10. A parent’s guide to choosing the next learning step
Begin with the student’s current exercise book, recent feedback and school assessment notice. Ask which chapter is being taught and what the teacher expects students to show in their working. Then choose a small sample of questions, rather than judging the whole subject from one difficult page. A vocabulary guide is most useful when it helps interpret a specific piece of work.
If the student understands an explanation aloud but cannot write the mathematical reason, practise one sentence at a time: “The lines are parallel, so these corresponding angles are equal.” If the student writes reasons correctly but repeatedly substitutes the diameter for the radius, mark those quantities on a sketch before calculating. Different patterns call for different support; additional worksheets alone may not reveal the cause.
When considering tuition, ask how the tutor checks understanding before assigning practice, handles different school sequences and reviews recurring mistakes. Ask whether the student will explain their own method and complete independent questions after guidance. Use current information from the provider for class arrangements and availability. This article’s three-student examples describe teaching possibilities and do not state a timetable, fee or guaranteed outcome.
A practical sign of progress is that the student can justify a choice on a fresh diagram. They should be able to explain why a triangle is suitable for Pythagoras, why a particular ratio uses the known sides, or why a joined face is excluded from exposed area. Keep one early attempt and one later attempt so the change in reasoning can be discussed concretely.
Is this an official list of 100 required words?
No. It is an eduKate teaching selection organised around relevant mathematical ideas. The official syllabus describes subject content and learning expectations; this page translates selected language into meanings, examples and practice. A student should still use the textbook, teacher’s notes and current school instructions.
Should students memorise every definition before doing questions?
Learn a small connected group and use it immediately. For example, identify a reference angle, opposite side, adjacent side and hypotenuse on one diagram, then choose a ratio. A memorised definition that cannot be applied to a rotated diagram needs further explanation and practice.
Are all the words new at Secondary 2?
No. Terms such as perimeter, parallel, triangle and radius are foundations used in later work. They are included because a misunderstanding can affect a more advanced calculation. Use the diagnostic to decide which familiar words need revisiting and which can be applied confidently.
Does every school teach these chapters in the same term?
Use your school’s current plan. A published school outline shows how that school organises its course; it does not establish a national weekly sequence. Revision should follow the chapters and instructions relevant to the student’s own upcoming work.
Why is my calculator answer different from the model answer?
Check the angle mode, the order of operations, the ratio and the rounding instruction. Also check whether the model gives an exact expression while you have a decimal approximation. Write the equation first, then compare the calculator inputs with that equation.
How can parents help without teaching the formula themselves?
Ask the student to point to the information that allows the method: the right-angle mark, the stated similarity, the matching base and height, or the required surface. Ask what units the answer should have. These questions encourage clear reasoning without requiring a parent to solve every problem.
CHAPTER 12 OF 12 · Support and reference
12. Official references and further learning
Scope checked for this guide on 16 November 2026. The sources below support the curriculum and assessment context. The vocabulary explanations, fictional numerical situations, worked solutions and suggested learning activities are original teaching material.
- MOE: G2 and G3 Mathematics syllabuses — see the G3 Secondary Two section for the selected geometry and measurement content.
- Yishun Secondary School: Mathematics content outlines and its 2026 Secondary 2 G3 outline — an example of one school’s teaching sequence.
- SEAB: Secondary Education Certificate — information about the later national qualification.
- Secondary 2 G3 Mathematics vocabulary for Punggol — the wider subject vocabulary guide.
- Algebra, equations and graphs vocabulary — related language for forming equations and organising calculations.
Continue with the Secondary 2 G3 Mathematics vocabulary guide for a wider view of the subject and questions to discuss when arranging support.

