Small Group Tutorials

Here to help students catch up, keep up, and move ahead. Book a consultation here.

Top 100 Secondary 2 G3 Vocabulary List for Punggol | Mathematics Small Groups Tuition

Three students sit around open books and worksheets at a classroom table, reading, writing and discussing the work together.

Top 100 Secondary 2 G3 Vocabulary List for Punggol brings together the mathematical words students need to read questions, organise solutions and explain their reasoning. The focus is practical: understanding why factorise asks for a product, why at most includes the boundary, and why similar does not mean identical in size. Each entry has a clear meaning and an original example, covering algebra, proportion, graphs, geometry, trigonometry, measurement, statistics and probability. Use the list beside current schoolwork so that vocabulary becomes something your child can apply.

For families considering Secondary 2 G3 Mathematics small groups tuition in Punggol, the useful question is which words are obstructing independent work. Start with ten relevant entries, ask the student to explain them, and test them in an unfamiliar question. This is an eduKate teaching selection, not an official MOE or SEAB Top 100 list, a ranking by examination frequency, or a prediction paper. It includes earlier foundations that Secondary 2 work still depends on. Match the next practice session to the school’s actual topic sequence and assessment notice.

  • For: Secondary 2 students taking Mathematics at G3, and parents helping with learning decisions.
  • Inside: exactly 100 numbered words and terms, arranged into ten manageable groups with meanings and examples.
  • Priority: understand the command, identify the relationship, calculate accurately and check the answer against the original question.
  • School context: use the MOE curriculum and your own school’s instructions; Secondary 2 assessments are distinct from the later national SEC examination.
  • Practice: use the worked examples, short diagnostic, independent questions and suggested review routine below.
  • Small-group teaching: an illustrative three-student lesson gives each learner an individual attempt, explanation and fresh check.
  • Parent decision: look for clearer independent reasoning and a manageable workload, without expecting a guaranteed grade from a vocabulary list.

Contents

Understand the scope and find the vocabulary
  1. Where this list fits in Secondary 2 G3 Mathematics
  2. The 100-word Mathematics vocabulary list
Apply the vocabulary in learning
  1. Find the first word that changes the answer
  2. Worked example: expand, factorise and solve are different jobs
  3. Worked example: read a relationship before choosing a formula
  4. Worked example: let labels control the diagram
  5. Worked example: frequency, averages and probability
  6. Try six independent questions, then explain the answers
  7. Build a routine around the words your schoolwork uses
  8. What a three-student vocabulary lesson can accomplish
Parents, questions and official references
  1. How parents can choose a useful next step
  2. Questions students and parents often ask
  3. Official sources and how to keep this guide current
Jump to a ten-word group

CHAPTER 1 OF 13 · Understand and learn

1. Where this list fits in Secondary 2 G3 Mathematics

Back to contents

The MOE G2 and G3 Mathematics syllabus sets out G3 Secondary 2 content including proportion, algebraic manipulation, quadratic graphs, equations and inequalities, similarity, right-triangle trigonometry, solids, data and single-event probability. This vocabulary guide supports understanding across those areas. It also revisits terms such as coefficient and gradient because new work continues to use them. The list is selective: learning these entries does not replace the full curriculum, school lessons or mathematical practice.

eduKate Punggol Mathematics Tuition · 11-second introduction

A school’s calendar matters. For example, Yishun Secondary’s published Mathematics outlines give a school-specific sequence for Secondary 2 G3. That is an example of information a family can request from its own school, rather than a timetable every Punggol student should follow. Record the current chapter, the next assessed topics and the teacher’s instructions before selecting vocabulary for revision.

SEAB states that the SEC begins in 2027 and records subjects at their respective G1, G2 or G3 levels. That later qualification provides context; this page prepares students for lower-secondary learning. A current Secondary 2 student should not treat another cohort’s SEC syllabus or examination date as the immediate school assessment contract.

CHAPTER 2 OF 13 · Find the vocabulary

2. The 100-word Mathematics vocabulary list

Back to contents

Read each meaning together with its example. Then cover the last two columns and explain the word using a different number, diagram or situation. Definitions are starting points: a student who can recite “factorise” but cannot recognise a product still needs guided practice. Some entries are phrases because mathematics uses precise terms, not only single words.

Read the language of algebra

No.Word or termMeaningOriginal example
1variableA symbol representing a quantity whose value can vary or needs to be found.In C = 3n, n represents the number of notebooks bought.
2constantA quantity or value that stays fixed in the situation being considered.In y = 4x + 7, the constant term is 7.
3coefficientThe numerical factor multiplying a variable or variable term.The coefficient of x in −5x is −5, including the negative sign.
4termA part of an expression separated from other parts by addition or subtraction.The expression 3x² − 2x + 6 has three terms.
5expressionA mathematical combination of numbers, variables and operations without a statement of equality.The expression 2x + 5 can be evaluated when x is known.
6equationA statement that two mathematical expressions have equal values.The equation 2x + 5 = 13 is true when x = 4.
7formulaAn equation expressing a relationship between quantities.The formula A = lw connects a rectangle’s area, length and width.
8subjectThe quantity written alone on one side of a formula.In h = 3V/A, h is the subject of the formula.
9substitutionReplacing a symbol with a specified value or an equivalent expression.Substituting x = −2 into x² + 1 gives 5.
10equivalentHaving the same value for all allowed values of the variables involved.The expressions 3(x + 2) and 3x + 6 are equivalent.
Words 1–10: Read the language of algebra

Control expressions and fractions

No.Word or termMeaningOriginal example
11expandRewrite a product by multiplying its parts and removing brackets correctly.Expanding 2(x − 3) gives 2x − 6.
12factoriseRewrite an expression as a product of factors.Factorising x² + 5x + 6 gives (x + 2)(x + 3).
13common factorA factor shared by every term or number being considered.A common factor of 6x and 9 is 3.
14identityAn equality that holds for every allowed value of its variables.The identity (a + b)² = a² + 2ab + b² includes a middle term.
15quadratic expressionA polynomial expression in one variable whose highest non-zero power is two.The expression 2x² − x + 4 is quadratic.
16linear expressionA polynomial expression in one variable whose highest non-zero power is one.The expression 5x − 8 is linear, whereas 5x² − 8 is quadratic.
17numeratorThe expression or number above a fraction bar.In (x + 1)/3, the entire expression x + 1 is the numerator.
18denominatorThe non-zero expression or number below a fraction bar.The denominator of 4/(x − 2) is x − 2.
19algebraic fractionA fraction containing one or more algebraic expressions.For x ≠ 0, the algebraic fraction 6x/(3x) simplifies to 2.
20restrictionA condition that excludes values for which an expression or operation is undefined.For 5/(x − 4), the restriction is x ≠ 4.
Words 11–20: Control expressions and fractions

Read equations and inequalities

No.Word or termMeaningOriginal example
21solutionA value, or set of values, that makes the original mathematical statement true.The solution x = 6 makes x + 4 = 10 true.
22rootA value of a variable that makes a polynomial equal to zero.The roots of x² − 9 = 0 are 3 and −3.
23simultaneous equationsTwo or more equations that must be satisfied by the same values together.For x + y = 7 and x − y = 1, x = 4 and y = 3.
24eliminationCombining equations to remove one variable and find another.Adding x + y = 7 to x − y = 1 eliminates y.
25inequalityA mathematical statement comparing quantities using symbols such as <, >, ≤ or ≥.The inequality x > 3 allows 4 and 3.5, but excludes 3.
26less thanStrictly smaller than a specified quantity.A journey taking less than 20 minutes does not include exactly 20 minutes.
27at mostNo greater than a stated value, including that boundary value.A bag holding at most 8 kg may hold exactly 8 kg.
28at leastNo smaller than a stated value, including that boundary value.At least 12 participants means 12 or more participants.
29solution setAll values that satisfy an equation, inequality or stated conditions.For integer x with 1 < x ≤ 4, the solution set is {2, 3, 4}.
30number lineA line on which positions represent numbers in increasing order.Show x ≥ 2 with a filled circle at 2 and a ray to the right.
Words 21–30: Read equations and inequalities

Explain proportion and scale

No.Word or termMeaningOriginal example
31ratioA multiplicative comparison between two or more quantities in a stated order.A red-to-blue ratio of 2:3 means two red units for every three blue units.
32proportionAn equality between ratios or a relationship governed by a constant ratio or product.The statement 2/3 = 4/6 expresses equal ratios.
33direct proportionA relationship in which the ratio of one quantity to another stays constant.When y = 5x, doubling x doubles y.
34inverse proportionA relationship in which the product of two quantities stays constant.If xy = 24, doubling x halves y.
35constant of proportionalityThe fixed value linking quantities in a proportional relationship.In y = 6x, the constant of proportionality is 6.
36unit rateA comparison giving the amount associated with one unit of another quantity.A cost of $12 for four identical items is $3 per item.
37map scaleThe relationship between a distance on a map and its corresponding actual distance.At 1:10,000, one centimetre on the map represents 100 metres on the ground.
38scale factorThe multiplier connecting corresponding lengths of a figure and its image.A scale factor of 1.5 changes a 4 cm side to 6 cm.
39percentageA proportion expressed per hundred.Twenty-five per cent of 80 students is 20 students.
40percentage changeThe change divided by the original value, expressed as a percentage.A rise from 40 to 50 is a 25% increase.
Words 31–40: Explain proportion and scale

Read graphs accurately

No.Word or termMeaningOriginal example
41coordinateA number in an ordered pair that identifies a point’s position.The point (3, −2) has x-coordinate 3 and y-coordinate −2.
42axisA reference line used to locate or measure values on a graph.On a usual coordinate grid, the horizontal axis is the x-axis.
43originThe point where the coordinate axes meet at zero.The origin has coordinates (0, 0).
44gradientThe ratio of vertical change to horizontal change along a non-vertical straight line.A rise of 6 over a run of 3 gives gradient 2.
45interceptA point where a graph meets an axis, or the corresponding axis value.The graph y = 2x + 5 has y-intercept 5.
46linear graphA straight-line graph representing a linear relationship.The graph of y = 3x − 1 is a straight line.
47quadratic graphThe parabola produced by a quadratic relationship in one variable.The graph of y = x² has a curved, symmetrical shape.
48turning pointThe point at which a quadratic graph changes from decreasing to increasing, or the reverse.The turning point of y = x² is (0, 0).
49minimumThe least value reached within the stated domain or situation.For all real x, the minimum value of x² + 3 is 3.
50maximumThe greatest value reached within the stated domain or situation.For all real x, the maximum value of 7 − x² is 7.
Words 41–50: Read graphs accurately

Describe geometric relationships

No.Word or termMeaningOriginal example
51congruentHaving exactly the same shape and size, allowing for movement or reflection.Two triangles with matching corresponding sides and angles are congruent.
52similarHaving the same shape, with equal corresponding angles and proportional corresponding lengths.Similar rectangles may have different sizes but the same length-to-width ratio.
53corresponding sidesSides occupying matching positions in related figures.In similar triangles, compare corresponding sides in a consistent order.
54corresponding anglesAngles occupying matching positions in related figures or geometric arrangements.Corresponding angles in similar triangles are equal.
55enlargementA transformation multiplying distances from a centre by a scale factor.An enlargement with scale factor 2 doubles corresponding side lengths.
56reductionA size decrease produced by a positive scale factor smaller than one.A reduction with scale factor 0.5 halves every corresponding length.
57parallelDescribing distinct straight lines in a plane that never meet, however far extended.The opposite sides of a rectangle are parallel.
58perpendicularMeeting at a right angle.A rectangle’s adjacent sides are perpendicular.
59symmetryA property in which a figure matches itself under a specified transformation.A square has four lines of reflection symmetry.
60vertexA corner of a geometric figure; also the turning point of a parabola.A triangle has three vertices, one at each corner.
Words 51–60: Describe geometric relationships

Name the parts of a right-angled triangle

No.Word or termMeaningOriginal example
61right angleAn angle measuring exactly 90 degrees.The square marker in a triangle identifies its right angle.
62hypotenuseThe side opposite the right angle, and the longest side of a right-angled triangle.With perpendicular sides 6 cm and 8 cm, the hypotenuse is 10 cm.
63opposite sideThe side across from the selected angle in a triangle.Mark the chosen acute angle before identifying its opposite side.
64adjacent sideIn right-triangle trigonometry, the side next to the chosen acute angle that is not the hypotenuse.For angle θ, the adjacent side meets θ and the right angle.
65Pythagoras’ theoremThe relationship a² + b² = c² in a right-angled triangle, where c is the hypotenuse.The lengths 5, 12 and 13 satisfy 5² + 12² = 13².
66trigonometric ratioA ratio of specified side lengths linked to an angle.In a right triangle, sine, cosine and tangent depend on the selected acute angle.
67sineFor an acute angle in a right triangle, opposite side divided by hypotenuse.If opposite = 3 and hypotenuse = 5, sin θ = 3/5.
68cosineFor an acute angle in a right triangle, adjacent side divided by hypotenuse.If adjacent = 4 and hypotenuse = 5, cos θ = 4/5.
69tangentFor an acute angle in a right triangle, opposite side divided by adjacent side.If opposite = 3 and adjacent = 4, tan θ = 3/4.
70acute angleAn angle greater than zero degrees and smaller than 90 degrees.A 35-degree angle is acute.
Words 61–70: Name the parts of a right-angled triangle

Measure lengths, surfaces and solids

No.Word or termMeaningOriginal example
71perimeterThe total distance around the boundary of a plane figure.A rectangle 5 cm by 3 cm has perimeter 16 cm.
72areaThe measure of a two-dimensional region in square units.The same 5 cm by 3 cm rectangle has area 15 cm².
73volumeThe measure of three-dimensional space occupied or enclosed, in cubic units.A cube with side 2 cm has volume 8 cm³.
74surface areaThe total area of the relevant exposed surfaces of a solid.A closed cube with side 2 cm has surface area 24 cm².
75radiusThe distance from a circle’s centre to its circumference, or a sphere’s centre to its surface.A circle of radius 4 cm has diameter 8 cm.
76diameterA line segment through the centre joining two points on a circle, or its length.The diameter of a circle is twice its radius.
77perpendicular heightThe shortest distance from a vertex or upper plane to the relevant base plane.Use perpendicular height when finding a cone’s volume.
78slant heightThe inclined distance along a right cone’s surface from its vertex to the base circumference.A right cone with radius 3 cm and height 4 cm has slant height 5 cm.
79coneA solid with a circular base and a curved surface meeting at a vertex.A right cone’s volume is one third of base area multiplied by perpendicular height.
80sphereA solid whose surface points are all the same distance from its centre.A sphere of radius r has volume (4/3)πr³.
Words 71–80: Measure lengths, surfaces and solids

Make sense of data

No.Word or termMeaningOriginal example
81dataRecorded observations, measurements or values collected for a purpose.The times taken by ten students to finish a task form a dataset.
82frequencyThe number of times a value or category occurs.If four students chose cycling, the frequency for cycling is four.
83meanThe sum of numerical values divided by the number of values.The mean of 2, 4 and 9 is 5.
84medianThe middle value in ordered data, or the mean of the two middle values.The median of 2, 4 and 9 is 4.
85modeThe value or category that occurs most frequently.For 2, 2, 4 and 9, the mode is 2.
86grouped dataData organised into class intervals instead of listing every exact value.Journey times may be grouped into 0–under 10 and 10–under 20 minutes.
87class intervalA specified range used to group numerical data.The interval 10 ≤ t < 20 includes 10 minutes but excludes 20 minutes.
88midpointThe value halfway between two endpoints or class boundaries.The midpoint of a class from 10 to 20 is 15.
89histogramA display of grouped numerical data using adjacent bars whose areas represent frequencies.For equal-width classes, taller histogram bars indicate larger frequencies.
90stem-and-leaf diagramA data display splitting each value into a stem and a leaf while retaining the values.With key 2 ∣ 7 = 27, stem 2 and leaf 7 represent 27.
Words 81–90: Make sense of data

Use probability and answer instructions

No.Word or termMeaningOriginal example
91probabilityA measure of how likely an event is, from zero to one.For a fair six-sided die, the probability of rolling 6 is 1/6.
92outcomeOne possible result of a chance process.Rolling a 4 is one outcome when a die is rolled.
93sample spaceThe complete set of possible outcomes for the process being considered.For one die roll, the sample space is {1, 2, 3, 4, 5, 6}.
94eventA specified set of outcomes that meets a condition.Rolling an even number corresponds to the event {2, 4, 6}.
95equally likelyHaving the same probability under the stated model.The six faces of a fair die are equally likely outcomes.
96complementThe event containing every outcome outside the event being considered.The complement of rolling an even number is rolling an odd number.
97estimateFind an approximate value using sensible rounding, modelling or a graph.Estimate 19.8 × 5.1 using 20 × 5 = 100.
98calculateFind a numerical value through an appropriate mathematical process.Calculate the cost by multiplying quantity by price per item.
99showPresent sufficient mathematical steps to establish the stated result.To show that a length is 5 cm, give the calculation leading to 5 cm.
100justifySupport a statement or decision with valid mathematical reasons.Justify that a triangle is right-angled by checking the converse of Pythagoras’ theorem.
Words 91–100: Use probability and answer instructions

CHAPTER 3 OF 13 · Understand and learn

3. Find the first word that changes the answer

Back to contents

Before assigning all 100 entries, try a short conversation with one recent worksheet. Ask the student to circle the instruction word, underline the quantities and state what a finished answer would look like. Listen for an explanation. A pupil may say “I need to solve this” when the task only asks them to simplify an expression. Another may know the method but misread an upper limit as a minimum.

Use four prompts. First, ask what a word means. Second, ask the student to point to an example. Third, offer a near miss and ask why it does not fit. Finally, change the numbers and ask for independent use. For equation, the near miss can be 3x + 7 without an equals sign. For hypotenuse, rotate the triangle so that the longest side is no longer at the bottom of the page.

Record the result descriptively: “recognises the word but confuses the example”, “explains accurately but loses a negative sign”, or “uses it independently”. These observations lead to different next steps. A language problem calls for examples and contrasts; a calculation problem calls for mathematical repair. Repeatedly copying the same definition is unlikely to resolve an arithmetic error that has already been identified.

Keep the first session small enough to finish calmly. Five uncertain words from today’s work are more actionable than a broad statement that a student is weak in Mathematics. Ask which word caused the first wrong decision, and begin there.

CHAPTER 4 OF 13 · Understand and learn

4. Worked example: expand, factorise and solve are different jobs

Back to contents

Consider the expression (x + 2)(x + 3). If the instruction is expand, multiply each term in one bracket by each term in the other. The result is x² + 3x + 2x + 6, which simplifies to x² + 5x + 6. Both expressions are equivalent, but the expanded form makes the separate terms visible.

If the instruction is factorise x² + 5x + 6, the direction reverses. Find two numbers whose product is 6 and whose sum is 5. Those numbers are 2 and 3, so the factorised expression is (x + 2)(x + 3). Check by expanding. This check has a clear purpose: it verifies that every original term returns.

If the instruction is solve x² + 5x + 6 = 0, an equation has been introduced. Factorising gives (x + 2)(x + 3) = 0. A product is zero when at least one factor is zero, so x = −2 or x = −3. These values are roots. Substitution into the original equation confirms each one. Stopping at the brackets would leave the solving task unfinished.

Keep restrictions when a fraction changes appearance

Now simplify (x² − 9)/(x − 3). Factorising the numerator gives (x − 3)(x + 3)/(x − 3). For x ≠ 3, the common factor cancels and the expression equals x + 3. The restriction survives because the original denominator cannot be zero. The simplified appearance does not grant permission to use a value excluded by the original expression.

Ask the student to explain why cancellation works here but does not allow (x + 3)/x to become 3. In the first fraction, x − 3 is a factor of the whole numerator. In the second, x is only part of a sum. This distinction between terms and factors is a productive vocabulary checkpoint.

A parent can check the explanation without teaching a shortcut: “Show me the factor multiplying the whole numerator.” If the student points to an added term, pause and rebuild that distinction with small numerical fractions before returning to letters.

CHAPTER 5 OF 13 · Understand and learn

5. Worked example: read a relationship before choosing a formula

Back to contents

Suppose a hypothetical printing task costs $0.20 for each page with no fixed fee. If n is the number of pages and C is the total cost in dollars, C = 0.20n. The cost is directly proportional to the number of pages because C/n stays at 0.20 for positive n. Twenty pages cost $4; forty pages cost $8. Doubling the pages doubles the cost under this stated model.

Now add a fixed setup charge of $2. The relationship becomes C = 0.20n + 2. The cost still increases as the number of pages increases, but it is no longer directly proportional to n. Twenty pages cost $6 and forty pages cost $10. The phrase “both increase” is insufficient to establish direct proportion. The constant ratio is the deciding property.

For inverse proportion, imagine a simplified task with a fixed amount of work and equally productive workers. If the modelling assumptions hold, doubling the number of workers halves the time. State those assumptions: workers must not obstruct one another, and productivity must remain comparable. Real situations may depart from the model. A mathematical answer should respect the conditions given in the question.

Map scale requires units and dimensions

In an original map exercise, the scale is 1:20,000 and a route measures 3 cm on the map. The actual distance is 3 × 20,000 = 60,000 cm, or 600 m. Keep the same unit while applying the ratio, then convert. The example uses an invented map route; it does not give a measured distance between real Punggol landmarks.

If the question concerns an area, linear scale must be applied in two directions. A map rectangle measuring 2 cm by 3 cm at the same scale represents 400 m by 600 m, so its actual area is 240,000 m². Multiplying the map’s 6 cm² by the distance conversion only once would mix two different dimensions. Drawing the rectangle makes the reason visible.

CHAPTER 6 OF 13 · Understand and learn

6. Worked example: let labels control the diagram

Back to contents

On a graph, a point written as (2, 5) gives an x-coordinate followed by a y-coordinate. It does not mean that the horizontal distance is 5. Ask the student to trace horizontally from the origin first, then vertically. When using a graph with labelled units, include those units in the interpretation: a coordinate pair might describe time and distance rather than two lengths.

The graphs y = x² and y = −x² both pass through the origin, but their turning points have different meanings. The first has a minimum of zero; the second has a maximum of zero. A student should describe the direction in which the curve opens and distinguish the turning point’s coordinates from its maximum or minimum y-value. Checking several values is a simple way to test the description.

Opposite and adjacent depend on the chosen angle

Draw a right-angled triangle with sides 3 cm, 4 cm and 5 cm. Choose the acute angle opposite the 3 cm side. For that angle, the opposite side is 3, the adjacent side is 4 and the hypotenuse is 5. Therefore sin θ = 3/5, cos θ = 4/5 and tan θ = 3/4. Each fraction answers a different relationship.

Choose the other acute angle. The 3 cm and 4 cm sides swap their opposite and adjacent roles, while the 5 cm hypotenuse remains unchanged. Rotating the paper changes none of these relationships. The relevant angle, rather than whether a side looks horizontal or vertical, determines the labels.

For similar triangles, match corresponding vertices before forming a ratio. Write a short statement such as “small side 3 corresponds to large side 6”. If the next pair gives 4 corresponding to 8, the scale factor is consistently 2. Comparing a small figure’s first side to a large figure’s unrelated side can produce a plausible number with no valid geometric meaning.

CHAPTER 7 OF 13 · Understand and learn

7. Worked example: frequency, averages and probability

Back to contents

Use the invented data 4, 4, 5, 7 and 10 minutes for a practice task. The frequency of 4 is two. The mean is 30 ÷ 5 = 6 minutes. The median is 5 minutes because the values are already ordered. The mode is 4 minutes. Each result answers a different question about the same data. “Average” without further explanation can conceal which measure has been used.

If the 10-minute observation changes to 30 minutes, the mean becomes 10 minutes, while the median remains 5 and the mode remains 4. This shows why a report should choose and explain its measure. Do not say that the median is always best; the appropriate measure depends on the purpose and the features of the data.

With grouped data, the exact values inside a class are no longer known. To estimate a mean from class intervals, multiply each class midpoint by its frequency, add the products and divide by the total frequency. Explain that the midpoint represents the class for this estimate. The answer should not be presented as the exact mean of unseen individual observations.

Count outcomes only after checking the model

For one roll of a fair six-sided die, the sample space has six equally likely outcomes. The event “number greater than 4” contains 5 and 6, so its probability is 2/6 = 1/3. The complement contains 1, 2, 3 and 4 and has probability 2/3. Together, an event and its complement cover the whole sample space.

A spinner divided into unequal sectors needs a different check. Counting the colours alone does not establish equal likelihood. A colour covering half the circle is more likely than one covering a quarter, under the usual ideal spinner model. Encourage the student to say what makes the outcomes equally likely before using a favourable-outcomes fraction.

CHAPTER 8 OF 13 · Understand and learn

8. Try six independent questions, then explain the answers

Back to contents

Complete these original practice questions without looking at the vocabulary tables. They are teaching checks, not an official paper. Show enough working to reveal how you interpreted each instruction.

  1. Factorise x² + 7x + 12. Then explain what extra information would be needed to turn this into a solving task.
  2. A school activity accepts at most 24 participants. Write an inequality for the number n and say whether 24 is allowed.
  3. At a scale of 1:5,000, a map distance is 8 cm. Find the actual distance in metres.
  4. A right-angled triangle has perpendicular sides 9 cm and 12 cm. Find the hypotenuse and justify your method.
  5. Find the median and mode of 8, 3, 5, 3 and 11. Explain the first step needed for the median.
  6. A bag contains three red and two blue otherwise identical counters. One counter is chosen randomly. Find the probability of blue and name its complement.

Answers with the important vocabulary decisions

1. The factorised expression is (x + 3)(x + 4), because 3 + 4 = 7 and 3 × 4 = 12. An equation, such as x² + 7x + 12 = 0, would introduce a condition to solve. The expression alone does not ask for particular values of x.

2. n ≤ 24, with n a whole-number count in this context. Exactly 24 is allowed because “at most” includes the boundary. 3. The distance is 8 × 5,000 = 40,000 cm = 400 m. The scale compares lengths expressed in the same unit.

4. The hypotenuse is √(9² + 12²) = √225 = 15 cm. Pythagoras’ theorem applies because the given sides meet at a right angle. 5. Order the values as 3, 3, 5, 8, 11. The median is 5 and the mode is 3.

6. The probability of blue is 2/5. The complement is choosing red, with probability 3/5. The count-based calculation assumes each counter is equally likely to be selected. If a response is wrong, identify whether the difficulty concerned vocabulary, the model, arithmetic or presentation before deciding what to practise.

CHAPTER 9 OF 13 · Understand and learn

9. Build a routine around the words your schoolwork uses

Back to contents

A suggested routine is to choose eight to ten words from the current chapter, then revisit them through several short sessions. On the first day, explain each word and make one example. On the next session, hide the meanings and retrieve them. Later in the week, answer mixed questions without being told which word or method to use. Adapt the pace to the student’s workload and response; these are planning suggestions, not compulsory study targets.

Keep a small record with three columns: the word, the confusion and the corrected example. “At most: I excluded the boundary; corrected to n ≤ 24” is useful. “Revise inequalities” is too broad to guide the next ten minutes. Revisit the corrected example after a gap, then change the numbers or context to see whether understanding transfers.

Repair, stabilise or extend

Repair: when the meaning itself is uncertain, reduce the task. Use a simple expression before adding brackets, or a drawn triangle before adding trigonometry. Stabilise: when the student understands but forgets or confuses terms, mix familiar contrasts and require an independent explanation. Extend: when use is secure, ask for a counterexample, a reason a shortcut fails, or two valid methods.

A family in Punggol can fit a brief review around the actual school and CCA week. A demanding afternoon may call for one corrected question instead of a new set. If a student is repeatedly spending a long time without understanding the same step, bring that step to the teacher or tutor. More minutes are not automatically the correct response to an unidentified problem.

CHAPTER 10 OF 13 · Understand and learn

10. What a three-student vocabulary lesson can accomplish

Back to contents

The following is an illustrative small-group teaching design, not a statement of current class availability or a fixed timetable. Each of three learners first answers a short question independently. One may confuse an expression with an equation; another may forget a denominator restriction; the third may understand both and need a more demanding example. A shared topic can therefore contain different individual targets.

The tutor teaches one useful contrast, such as term versus factor, with a clean example. Students then take turns explaining a step, questioning a proposed answer and checking the reason. Rotate these roles so that the confident speaker does not become the permanent explainer. Everyone must also write a complete solution individually.

Finish with a fresh question and record each student’s next action. A group answer cannot establish that every learner understands. The independent check is where the tutor sees whether to rebuild an earlier idea, provide more varied practice or extend the task. Parents can ask to see this difference between the first attempt and the final unfamiliar example.

When comparing support options, ask how the tutor uses the school’s topic outline, handles different rates of progress and keeps follow-up work proportionate. A class of three creates opportunities for attention, but the teaching decisions and quality of feedback determine whether those opportunities are used well.

CHAPTER 11 OF 13 · Support and reference

11. How parents can choose a useful next step

Back to contents

Bring one recent assessment, one ordinary homework sample and the current topic list to a discussion about support. The assessment shows performance under specific conditions; the homework may reveal a different pattern. Ask the student which instruction felt unclear and where they first stopped understanding. Their explanation is evidence, even when they cannot yet name the mathematical issue precisely.

If most mistakes follow misread commands, a focused language-and-question-reading routine may be appropriate. If the student reads accurately but cannot manage fractions, fix that foundation alongside current work. If understanding is secure and time is the difficulty, examine question selection, unnecessary rewriting and checking habits. The response should follow the problem observed.

For upper-secondary subject planning, ask the school about its actual combinations, prerequisites and counselling process. A strong vocabulary score does not by itself establish readiness for Additional Mathematics or any particular pathway. Look also at algebraic fluency, willingness to explain, independent practice and the student’s overall workload. Current school guidance should settle school-specific eligibility questions.

Progress can be described concretely: the student now translates “at least” correctly, labels a triangle without help, or explains why an estimate is reasonable. Continue checking schoolwork, but avoid turning every evening into an oral examination. Agree on a short review, a stopping point and a question the child can take to the next lesson.

CHAPTER 12 OF 13 · Support and reference

12. Questions students and parents often ask

Back to contents

Must every word be new in Secondary 2?

No. Terms such as variable, area and ratio are earlier foundations that remain active in Secondary 2. Their familiar appearance can hide an uncertain meaning. This list combines retained foundations with vocabulary useful for more demanding lower-secondary work.

Does memorising the list guarantee better examination results?

No. Definitions need to connect to reasoning, calculations, diagrams and complete answers. Use a new question to check understanding. A student who remembers a definition but chooses the wrong relationship needs further teaching, not a promise based on the number of words learned.

Can a student explain a word in another language first?

Yes, as a learning step. Ask the student to connect that explanation to the English instruction and the mathematical notation used in school. Check that the translation preserves the exact boundary: “at most” and “less than” cannot be treated as interchangeable.

What if the textbook uses a slightly different definition?

Compare the context and examples. Some terms have several mathematical uses: a vertex can be a geometric corner or the turning point of a parabola. Follow the teacher’s notation and ask about any apparent disagreement rather than assuming one phrase always works everywhere.

Should we study all ten groups before the next assessment?

Use the school’s confirmed scope first. Choose the groups that directly support those topics and repair any prerequisite words that block them. The complete list is a reference to revisit; it does not require every family to follow the same weekly order.

When is small-group tuition worth considering?

Consider support when repeated errors remain unclear despite reasonable school follow-up and practice, or when the student benefits from more guided explanation. Ask for a specific learning target and a way to check independent progress. Confirm actual subject provision, lesson arrangements and fees directly before deciding.

CHAPTER 13 OF 13 · Support and reference

13. Official sources and how to keep this guide current

Back to contents

Editorial review: 16 November 2026. Curriculum orientation was checked against the MOE G2 and G3 Mathematics syllabus, the Yishun Secondary Mathematics content-outline page as a school-specific example, and the SEAB SEC overview. The definitions, practice data and worked examples here are original teaching material. Check your own school’s latest instructions when planning assessment preparation.

Continue with the Secondary 2 G3 Mathematics learning and tuition guide for a wider view of the subject and questions to discuss when arranging support.

Continue from here: Start Here · Tuition · Education · Pathways · Parenting 101 · All Site Routes

eduKate Punggol

Contact

83 Punggol Central, Singapore 828761

edu|Kate Bukit Timah

8 Fourth Avenue, Singapore 268674

By Appointment +65 8823 1234
admin@edukatesg.com

Email Us

When a child finally understands, school becomes less frightening and the future opens wider. Email us for the latest schedules and fees.

← 返回

感谢您的回复。 ✨