Small Group Tutorials

Here to help students catch up, keep up, and move ahead. Book a consultation here.

Top 100 Secondary 2 G3 Vocabulary List for Punggol | Geography: Housing, Transport and Fieldwork

Three students sit around open books and worksheets at a classroom table, reading, writing and discussing the work together.

This Top 100 Secondary 2 G3 Vocabulary List for Punggol focuses on Geography through housing, transport and fieldwork. It helps students explain how homes connect with everyday needs, compare complete journeys and judge what an investigation can actually show. A student who understands population density, accessibility, sampling and validity can move beyond saying that an area is busy or convenient. The goal is a clear answer supported by suitable evidence, with enough precision to recognise when another explanation is possible.

Begin with the school topic and one recent piece of work. Select a few connected terms, explain their meanings, then use them in a calculation, comparison or investigation plan. These 100 words and terms are an eduKate teaching selection, not an official MOE or SEAB list or an examination forecast. The examples are original, and all numerical neighbourhood, journey and survey data are fictional practice material. Punggol provides a familiar setting for thinking about everyday places; no example should be treated as a measurement of an actual estate, resident or transport service.

  • For: Secondary 2 students taking Geography at G3 and parents helping them study.
  • Focus: housing needs, land use, liveability, transport connections and geographical investigation.
  • Inside: exactly 100 numbered terms, clear meanings and fresh examples.
  • Important distinctions: density and overcrowding; distance and accessibility; a sample and the wider population.
  • Practice: conditional calculations, worked reasoning, fieldwork design and diagnostic answers.
  • School fit: follow the teacher’s current sequence, assessment scope and investigation instructions.
  • Progress: check independent explanation and appropriate use of evidence.

Contents

Understand the scope and find the vocabulary
  1. Connect the vocabulary to current school learning
  2. The top 100 housing, transport and fieldwork terms
Apply the vocabulary in learning
  1. Compare housing conditions without making assumptions about residents
  2. Calculate a complete journey and state its conditions
  3. Design fieldwork that answers a narrow question
  4. Read counts, survey responses and averages carefully
  5. Explain a mechanism before judging a proposal
  6. Check the words through short diagnostic questions
  7. Join vocabulary practice to an actual decision
Parents, questions and official references
  1. Help your child choose the next useful step
  2. Questions families ask about this focused list
  3. Official references and review date
Jump to a ten-word group

CHAPTER 1 OF 12 · Understand and learn

1. Connect the vocabulary to current school learning

Back to contents

The MOE lower-secondary Geography G2 and G3 syllabus includes housing, transport systems and geographical investigation within its two-year programme. This guide concentrates on those areas. It does not attempt to reproduce the whole lower-secondary curriculum.

For a current school illustration, North Vista Secondary’s 2026 Secondary 2 G3 notice lists geographical investigation, housing and transport. Assumption English School’s inquiry overview, updated in October 2026, describes Secondary 2 transport investigation. These examples show relevant applications, while each student’s school determines its own instructions and assessment arrangements.

The later national qualification is separate: the SEAB SEC overview explains the certificate introduced from 2027. Here, concentrate on understanding the current school question, selecting evidence and explaining the relationship it asks about.

CHAPTER 2 OF 12 · Find the vocabulary

2. The top 100 housing, transport and fieldwork terms

Back to contents

Read related terms together. The table examples show how vocabulary supports a decision or explanation; they are not sentences that must be memorised exactly. Numerical illustrations throughout this article are fictional and must retain that label when used for practice.

Words 1–10: Housing and household needs

No.TermMeaningOriginal example
1HousingAccommodation and buildings used as places to live.An investigation of housing asks about conditions and needs, not just building appearance.
2ShelterProtection from weather and other environmental exposure.A home provides shelter, but housing needs extend beyond having a roof.
3HouseholdPeople sharing a home and domestic living arrangements, including a person living alone.Two households may have different needs despite occupying similarly sized homes.
4Housing needA requirement for accommodation suited to people’s circumstances.A household’s housing need can change when its size or mobility requirements change.
5Housing qualityThe condition and suitability of accommodation for its occupants.A fair housing-quality comparison uses stated features rather than assumptions about residents.
6SanitationArrangements for safely managing human waste and maintaining hygienic living conditions.Sanitation concerns functioning systems, not merely whether a photograph looks tidy.
7Informal settlementA settlement developed outside formal planning arrangements or without secure legal tenure.Do not identify an informal settlement from residents’ income or building appearance alone.
8OvercrowdingMore occupants sharing accommodation than its space and facilities can adequately support.Overcrowding requires information about accommodation and occupants, not neighbourhood density alone.
9AffordabilityHow manageable a cost is relative to income, resources and other necessary expenses.A lower-priced home is not automatically affordable for every household.
10TenureThe arrangement under which someone occupies or holds rights to property.Ownership and renting are tenure arrangements, not measures of a person’s worth.
Terms for discussing housing accurately and respectfully

Words 11–20: Land use and urban form

No.TermMeaningOriginal example
11Land useThe activity or purpose assigned to a piece of land.The sketch separates land used for homes from land used for recreation.
12ResidentialUsed mainly for living accommodation.Label a residential area using map evidence rather than guessing from its size.
13CommercialAssociated with business activities such as selling goods or providing services.A row of shops represents commercial activity within the fictional neighbourhood.
14IndustrialAssociated with producing, processing or handling goods and related activities.Check the map’s key before classifying a large building as industrial.
15Mixed useA combination of different functions within an area or development.Homes above shops illustrate mixed use in a hypothetical streetscape.
16High-rise housingHomes arranged within tall residential buildings.High-rise housing describes building form; it does not establish household overcrowding.
17Population densityThe number of residents divided by the land area they occupy.Equal population densities can occur in areas with different total populations.
18Built-up areaLand substantially occupied by buildings and associated developed surfaces.State the mapped boundary before estimating the extent of a built-up area.
19Land scarcityInsufficient available land to satisfy all competing demands simultaneously.Land scarcity can require choices between additional facilities and other uses.
20Land-use planningOrganising different uses of land and considering their relationships.A planning explanation links housing locations with access to services and transport.
Terms for describing how an area is organised

Words 21–30: Liveability and different users

No.TermMeaningOriginal example
21LiveabilityThe extent to which a place supports comfortable and suitable everyday living.Judge liveability through relevant criteria rather than one attractive feature.
22AmenityA facility or service supporting everyday needs, convenience or enjoyment.The fictional map marks a clinic as an amenity residents may need.
23AccessibilityHow easily someone can reach and use a destination or opportunity.A short route can have poor accessibility if an essential connection is unusable.
24Inclusive designDesign that considers people with differing abilities and circumstances.Inclusive design asks whether the whole journey works for a range of users.
25Barrier-free accessAccess designed to reduce physical obstacles to movement.One ramp does not establish barrier-free access along an entire route.
26Quality of lifePeople’s overall well-being and experience of their living conditions.Quality of life may involve time, comfort and participation as well as facilities.
27Public spaceSpace available for public use under the access rules that apply.A public space should be assessed through its actual uses and conditions.
28CommunityPeople connected by place, relationships, interests or shared activities.A community contains varied experiences, so one opinion cannot represent everyone.
29StakeholderA person or group with an interest in or affected by a decision.A street proposal may affect residents and delivery workers differently.
30PerceptionThe way a person understands or experiences something.A survey of perceived convenience measures opinions, not journey time directly.
Terms for examining how places work for people

Words 31–40: Transport connections

No.TermMeaningOriginal example
31Transport networkConnected routes and points enabling movement between places.The transport network must be read as connections rather than isolated stops.
32NodeA point where movement enters, leaves or connects within a network.The fictional interchange forms a node connecting several journeys.
33RouteThe path taken between a starting point and destination.The usable route follows crossings and paths instead of a straight line through buildings.
34ModeThe means of travel used for a journey or part of it.A journey can combine walking with a motorised mode.
35TerminalA facility serving the beginning, end or handling of transport services.A terminal’s role differs from that of an ordinary point along a route.
36InterchangeA place where travellers can transfer between services or routes.The interchange’s layout affects the effort involved in a transfer.
37ConnectivityThe extent and quality of links between places or network elements.A new link can improve connectivity without shortening every user’s journey.
38IntermodalInvolving movement or transfer between different transport modes.Moving from a bicycle journey to a train journey is an intermodal connection.
39First mileThe initial connection from an origin to the main transport service.The first mile is a journey segment, not necessarily a literal mile long.
40Last mileThe final connection from the main transport service to the destination.A convenient ride can still be followed by a difficult last-mile connection.
Terms for following a complete journey

Words 41–50: Transport patterns and performance

No.TermMeaningOriginal example
41CommuteA regularly repeated journey between home and work or study.Comparing commutes requires the same start and finish points.
42Travel timeThe time needed for a stated journey or journey segment.State whether travel time includes walking, waiting and transfers.
43Waiting timeThe time spent awaiting a service or opportunity to continue.A shorter ride may be offset by longer waiting time.
44TransferA change from one transport service or mode to another.A transfer may add walking and waiting beyond time inside vehicles.
45FrequencyThe number of service occurrences within a specified period.Frequency alone does not show whether departures are evenly spaced.
46CapacityThe amount of movement a vehicle or facility can accommodate under stated conditions.Define capacity per vehicle, trip or time interval before comparing systems.
47RidershipThe number of passenger trips or boardings recorded under a stated counting method.Ridership counts need not equal the number of distinct people travelling.
48Traffic volumeThe number of vehicles passing a location during a stated period.A ten-minute traffic count cannot be compared directly with an unadjusted hour-long count.
49CongestionA condition in which crowding impedes movement and creates delay.A photograph may suggest congestion, but repeated observation is needed to establish delay.
50ReliabilityThe consistency with which a service or measurement performs as expected.Several journey observations help assess consistency more than one unusually quick trip.
Terms for measuring transport without confusing quantities

Words 51–60: Sustainable choices

No.TermMeaningOriginal example
51SustainabilityMeeting present needs while maintaining the capacity to meet future needs.A sustainability judgment considers continuing effects rather than an opening-day appearance.
52Resource efficiencyAchieving a desired result while using fewer resources for that result.Compare resource use per passenger journey when the data allow that comparison.
53Carbon footprintAssociated greenhouse gas emissions expressed using a common carbon-dioxide-equivalent measure.State the included activities before comparing two carbon footprints.
54Active mobilityWays of moving such as walking and cycling, often for local connections.A proposed walking connection may support active mobility for suitable journeys.
55Public transportShared passenger services available to the public under their operating arrangements.Evaluate public transport through the full journey rather than the vehicle alone.
56WalkabilityHow well an area supports practical and comfortable travel on foot.Walkability includes connections and crossings as well as path length.
57Trade-offA choice in which gaining a benefit involves accepting another cost or loss.Identify who gains and who bears the cost when explaining a trade-off.
58Short termA period near the decision or event under discussion.A construction-related diversion may be a short-term effect of a project.
59Long termA period extending beyond the immediate effects of a decision.Long-term evaluation includes maintenance and continued usability.
60Sustainable managementOrganising use and protection so benefits can continue without undermining future needs.A management proposal needs a mechanism, resources and a way to review its effects.
Terms for examining benefits, costs and conditions

Words 61–70: Designing an inquiry

No.TermMeaningOriginal example
61Inquiry questionA focused question that guides what an investigation tries to find out.Ask how two connections differ instead of whether an entire town is good.
62HypothesisA testable expectation about a relationship or outcome.A hypothesis should be open to disagreement from the evidence collected.
63VariableA feature or quantity that can take different values.Distance, waiting time and satisfaction rating are different variables.
64Independent variableThe factor varied in a test or used as the explanatory comparison.A comparison may examine how walking distance relates to journey time.
65Dependent variableThe outcome measured in relation to the factor being investigated.Journey time is the measured outcome in a distance-and-time inquiry.
66Controlled variableA relevant factor kept consistent where possible for a fair comparison.Use equal observation durations when comparing counts at two sites.
67IndicatorA measurable feature used to represent an aspect of a broader idea.Step-free continuity is one indicator of accessibility, not its complete measure.
68Operational definitionThe precise rule used to identify or measure something in an investigation.Define when a journey starts and ends before recording its duration.
69Primary dataInformation gathered directly for the investigation being carried out.Your team’s agreed observation counts are primary data for its inquiry.
70Secondary dataExisting information obtained from another source for use in the investigation.A published map supplies secondary data whose date and coverage need checking.
Terms for turning curiosity into an answerable question

Words 71–80: Sampling and collecting information

No.TermMeaningOriginal example
71PopulationThe complete group of people or units an investigation aims to study.A study population could be all path segments within a defined area.
72SampleThe selected part of the study population actually investigated.Five observed segments form a sample, not an automatic account of every path.
73Sampling frameThe list or defined set from which a sample is selected.A numbered map of eligible path segments can form a sampling frame.
74Random samplingSelecting units through a chance-based procedure.Use a random-number process rather than choosing whichever segment looks most interesting.
75Systematic samplingSelecting units at a fixed interval, commonly after a random starting point.An agreed plan might examine every fourth eligible segment after selecting the starting position.
76Convenience samplingSelecting units because they are easy to reach or available.Studying only the nearest paths is convenient but may omit different conditions elsewhere.
77RepresentativenessHow well a sample reflects relevant features of the wider study population.A larger sample is not necessarily representative if the same groups remain excluded.
78BiasA systematic distortion arising from selection, measurement or interpretation.Recording only favourable features can bias a neighbourhood assessment.
79QuestionnaireAn organised set of questions used to collect responses.A neutral questionnaire avoids wording that pushes respondents towards praise or criticism.
80ObservationInformation recorded by directly examining an event, feature or condition.Record a missing connection separately from your interpretation of its effect.
Terms for deciding what to observe and whose views are represented

Words 81–90: Recording and calculating

No.TermMeaningOriginal example
81TallyA count recorded using a consistent marking system.Agree what qualifies for one tally before different observers begin counting.
82Field sketchA selective drawing showing relevant features observed at a location.Label the connection being studied rather than drawing every decorative detail.
83Map scaleThe relationship between mapped distance and the corresponding distance on the ground.Convert units before translating a measured map length into metres.
84LegendThe explanation of symbols, colours or categories used in a representation.A reader needs the legend to distinguish observed barriers from suggested improvements.
85UnitThe stated measure in which a quantity is expressed.People per square kilometre and people per household measure different things.
86MeanThe total of numerical values divided by the number of values.A single unusually long wait can raise the mean waiting time.
87MedianThe middle value in ordered data, or the mean of the middle two.Order the five fictional journey times before identifying their median.
88RangeThe highest numerical value minus the lowest.The range describes spread but does not show every variation within the data.
89PercentageA proportion expressed out of one hundred.A survey percentage needs the number answering that question as its denominator.
90RateA quantity expressed per unit of another quantity, often time.A count per minute permits a comparison between different observation durations.
Terms for keeping geographical data clear and comparable

Words 91–100: Interpreting and judging evidence

No.TermMeaningOriginal example
91PatternA recognisable arrangement or relationship within the information.State where the pattern occurs before suggesting why it exists.
92TrendA general direction of change across an ordered series of observations.An increasing trend can include a temporary fall within the series.
93AnomalyAn observation that differs notably from the wider pattern.An anomaly should prompt checking rather than automatic deletion.
94CorrelationAn association between variables that tend to vary together.A correlation between distance and satisfaction does not establish the cause of dissatisfaction.
95CausationA relationship in which one factor contributes to producing an effect.Showing causation requires more than noticing two features together.
96ComparabilityThe extent to which measurements share a suitable basis for comparison.Matching time units improves comparability but does not remove every difference between sites.
97ValidityHow well a method or indicator addresses what it is intended to investigate.A count of shops has limited validity for judging whether residents can access healthcare.
98LimitationA restriction on what an investigation or proposal can establish or achieve.One dry-weather visit is a limitation when examining conditions during rain.
99EvaluateMake a supported judgment using relevant criteria and evidence.Evaluate an improvement by connecting its benefits and limitations to the stated need.
100ConclusionAn evidence-based answer to the investigation question.The conclusion should retain the study’s location, period and sample boundaries.
Terms for drawing conclusions with appropriate limits

CHAPTER 3 OF 12 · Understand and learn

3. Compare housing conditions without making assumptions about residents

Back to contents

Start with the aspect the question actually asks about. Housing quality, affordability, neighbourhood density and access to amenities are related, but they are different measures. A photograph of tall buildings cannot tell you household income, the number of people in each home or the condition of every interior.

Fictional density example: Area A has 6,000 residents within a defined land area of 2 km². Area B has 9,000 residents within 3 km². Area A’s density is 6,000 ÷ 2 = 3,000 people per km². Area B’s density is 9,000 ÷ 3 = 3,000 people per km². Their total populations differ, but their average population densities are equal.

That result does not establish equal living conditions. The calculation says nothing about the distribution of residents within each boundary, housing space per household or access to services. Those questions need different information. State the boundary used, because including a large unoccupied area would change the average.

For affordability, compare costs with resources and necessary expenses. Avoid treating an advertised price alone as proof. This learning guide does not require a student to ask neighbours about income or housing payments. Use supplied classroom information or fictional households when practising that relationship.

CHAPTER 4 OF 12 · Understand and learn

4. Calculate a complete journey and state its conditions

Back to contents

Fictional Punggol journey exercise: two invented connections serve the same origin and destination. They are not real routes or service timings. Connection A involves 8 minutes of initial walking, 6 minutes waiting, a 12-minute ride and 4 minutes of final walking. Connection B involves 4 minutes of initial walking, 10 minutes waiting, a 9-minute ride and 4 minutes of final walking.

A takes 8 + 6 + 12 + 4 = 30 minutes. B takes 4 + 10 + 9 + 4 = 27 minutes. On these stated values, B is three minutes faster overall even though its waiting time is four minutes longer. A complete comparison uses the same journey components for both connections.

Now explain where A’s initial walking estimate came from. On a fictional map at 1:10,000, a measured path length of 4.8 cm represents 48,000 cm, or 480 m. At an assumed constant walking speed of 60 m per minute, walking time is 480 ÷ 60 = 8 minutes. This calculation excludes pauses and crossing delays and assumes the mapped route is usable.

The assumed speed is a teaching value, not a requirement for any person. A traveller’s actual pace and needs may differ. Similarly, a straight-line map measurement cannot be substituted for a route that bends around buildings. If the question changes a condition, update the estimate rather than defending the original answer.

A judgment about accessibility goes further than choosing the smallest total. Ask whether the connection is usable throughout, whether transfers are manageable and whether waiting conditions matter for the traveller. The calculation supplies one piece of evidence; the decision depends on the question’s criteria.

CHAPTER 5 OF 12 · Understand and learn

5. Design fieldwork that answers a narrow question

Back to contents

A manageable inquiry might ask: How do two walking connections differ in the features supporting access between housing and a nearby amenity? Define the origin, destination and boundaries before recording anything. A question about two connections is more answerable than a claim about the liveability of all Punggol.

Choose a few observable indicators: continuity of the path, crossing points, step-free connections or places to pause. Define each recording rule. For example, observers must agree what counts as a break in the route. Otherwise, apparent differences could reflect different interpretations rather than different conditions.

Use the same checklist and comparable observation periods. Record weather and unusual interruptions rather than pretending every external condition is controlled. An observational investigation does not necessarily involve manipulating an independent variable or conducting an experiment. Follow the school’s chosen inquiry method.

For an introductory task, observe features rather than collecting personal information. Record anonymous counts if required, without names, addresses, contact details, faces or identifying descriptions. Stay on permitted public paths, avoid blocking movement and follow the teacher’s supervision and safety arrangements. Never enter roads, private premises or restricted areas to improve a data point.

If a school-approved activity includes questions for people, participation must be voluntary and the questions should avoid personal or financial details. Respect a refusal immediately. Classroom role-play and supplied fictional responses can develop questionnaire skills without approaching strangers.

Finally, distinguish evidence of a feature from a judgment about compliance or every user’s experience. Observing a ramp does not certify that an entire route meets an accessibility standard. A more defensible conclusion identifies the observed feature, explains its possible contribution and states what was not assessed.

CHAPTER 6 OF 12 · Understand and learn

6. Read counts, survey responses and averages carefully

Back to contents

Fictional housing-survey example: 30 invented respondents answer a practice question about whether a nearby shared space meets their needs. Eighteen choose yes, nine choose partly and three choose no. The proportion choosing yes is 18 ÷ 30 × 100 = 60%. Report it as 60% of this fictional sample, not 60% of Punggol residents.

The percentage does not reveal why people selected those answers. A neutral follow-up might ask which feature affected their response, using supplied classroom options. A leading question such as “How much do you love this excellent space?” encourages praise and weakens the value of the responses.

For counts collected over different durations, convert to a common rate. Suppose one fictional observation records 80 vehicles in 10 minutes and another records 100 in 20 minutes. Their average rates are 8 and 5 vehicles per minute respectively. The larger raw count therefore does not indicate the higher observed rate.

These rates describe the recorded intervals. They do not prove the same relationship persists all day. Differences in time, road function or temporary events may matter. A photograph showing many vehicles also cannot establish their speed or delay. It may suggest a question about congestion, which movement observations can investigate.

Consider fictional waiting times of 2, 3, 3, 4 and 13 minutes. The mean is 25 ÷ 5 = 5 minutes, the median is 3 minutes and the range is 13 − 2 = 11 minutes. The long wait affects the mean. Retain the observation and investigate its context rather than deleting it because it is inconvenient.

CHAPTER 7 OF 12 · Understand and learn

7. Explain a mechanism before judging a proposal

Back to contents

A weak answer says, “The improved path makes the area better.” A stronger answer identifies the change, the person or journey affected and the connection between them. For a hypothetical missing path segment, a response could explain that completing the connection removes a detour, reducing the distance needed to reach the amenity.

The mechanism matters. The proposal changes route continuity; that can change the usable distance; a shorter usable route may reduce the effort or time required. The answer should not promise the same benefit to everyone, especially if the source identifies other barriers.

For evaluation, choose criteria that fit the problem. If the main difficulty is an unusable crossing, extra seating alone may not resolve it. Seating could still benefit people who need to rest. A reasoned judgment recognises that contribution while explaining why a different intervention may be necessary for the stated access problem.

Be equally careful with relationships in data. Suppose longer routes receive lower convenience ratings in a fictional sample. That is an association. Waiting conditions, gradients, crossings or individual needs might also affect ratings. The evidence can support a hypothesis about distance without proving that distance alone caused every response.

A useful closing sentence is specific: “The proposal addresses the observed break in this connection, but the investigation did not assess conditions during rain or all users’ requirements.” The limitation belongs to the actual study, rather than a generic statement that more research is always needed.

CHAPTER 8 OF 12 · Understand and learn

8. Check the words through short diagnostic questions

Back to contents

Question 1: Density and households

Two fictional areas have equal population density. Does this establish equal overcrowding?

Answer: No. Population density uses residents per land area. Overcrowding concerns occupants relative to accommodation and facilities. Household-level information would be needed for the second judgment.

Question 2: Comparing counts

A fictional site records 60 pedestrians in 15 minutes. Another records 50 in 10 minutes. Which observed rate is higher?

Answer: The first rate is 4 per minute and the second is 5 per minute. The second is higher during those observations. Different observation times or conditions may still limit a broader comparison.

Question 3: Interpreting a sample

A group asks only its classmates about neighbourhood transport and claims to represent all residents. What is the main problem?

Answer: The sample may exclude people with different ages, journeys and needs. Increasing the number of similar classmates does not necessarily repair that representativeness problem.

Question 4: Matching the method

An investigation asks whether a route is step-free, but records only the number of shops nearby. What needs changing?

Answer: The indicator does not address the inquiry well. Observe the route’s relevant physical connections using a clear definition. The problem concerns validity, not simply sample size.

Question 5: A cautious conclusion

One photograph shows closely spaced vehicles. Can it establish frequent congestion throughout the week?

Answer: No. It records a particular view at one moment and may suggest crowding. Evidence about movement, delay and repeated periods is needed for the broader claim.

CHAPTER 9 OF 12 · Understand and learn

9. Join vocabulary practice to an actual decision

Back to contents

Use three short sessions around one question. First, select five connected terms and explain them through a sketch. Second, use supplied information to make a calculation or comparison. Third, write a conclusion that identifies the evidence and one relevant boundary. Revisit the least secure connection with changed information.

For example, a housing task can connect population density, household, housing quality, indicator and limitation. A journey task can connect route, waiting time, transfer, accessibility and evaluate. Related vocabulary is easier to use purposefully than an unrelated collection of difficult words.

In an illustrative three-student activity, each learner first chooses a conclusion independently. One then checks the numbers, another checks the definitions and the third checks whether the claim exceeds the evidence. Rotate these jobs on a second example and finish with separate written answers.

Record mistakes as meaning, calculation, comparison or evidence problems. A wrong denominator needs a different correction from an unsupported generalisation. Parents can ask the student to explain which repair made the answer stronger, so progress becomes visible beyond the number of pages completed.

CHAPTER 10 OF 12 · Support and reference

10. Help your child choose the next useful step

Back to contents

Start with the student’s explanation of a marked answer. If they cannot define the central word, practise meaning and an example. If they understand the word but miss a condition, annotate the question together. If the calculation is correct but the conclusion is too broad, discuss what the data actually represent.

Use respectful language about places and households. Housing arrangements, income and transport choices do not determine a person’s character or ability. A student should learn to discuss access, needs and constraints without turning them into labels for people.

Before adding support, bring the current school outline and a small sample of work. Ask how the teaching will develop independent use of evidence and how progress will be checked. A useful plan names a manageable target, such as comparing rates correctly or explaining a route barrier, rather than promising that a memorised list will secure a grade.

Keep the work proportionate to the family week. A careful explanation of one journey or one survey result can reveal the next learning need. If a fieldwork requirement is unclear, check with the school before arranging visits or asking anyone for information.

CHAPTER 11 OF 12 · Support and reference

11. Questions families ask about this focused list

Back to contents

Are all 100 terms official syllabus requirements?

No. They are an editorial teaching selection, including useful language for applying and evaluating geographical information. The school’s programme and assessment instructions determine the required scope.

Does high population density mean poor liveability?

Density alone cannot establish that. Liveability depends on relevant conditions and people’s needs. Examine the evidence for services, usable connections and other criteria instead of assigning a verdict from one number.

Is a larger sample always better?

More observations can help, but the selection method and measurement quality still matter. A large sample that systematically misses relevant people, places or times can preserve important bias.

Must students conduct surveys outside school?

No. These skills can be practised with the fictional information here and teacher-approved materials. Follow school arrangements for formal investigations, including supervision, consent and appropriate data collection.

What should a confident learner practise next?

Change a condition and reconsider the judgment. Add a transfer, change the study boundary or provide a second stakeholder’s need. The aim is flexible reasoning using accurate vocabulary.

CHAPTER 12 OF 12 · Support and reference

12. Official references and review date

Back to contents

References reviewed on 16 November 2026. The vocabulary selection, definitions, examples and fictional data are original teaching material. Use the current school outline to choose relevant chapters and tasks.

Continue with the Secondary 2 G3 Geography vocabulary guide for a wider view of the subject and questions to discuss when arranging support.

Continue from here: Start Here · Tuition · Education · Pathways · Parenting 101 · All Site Routes

eduKate Punggol

Contact

83 Punggol Central, Singapore 828761

edu|Kate Bukit Timah

8 Fourth Avenue, Singapore 268674

By Appointment +65 8823 1234
admin@edukatesg.com

Email Us

When a child finally understands, school becomes less frightening and the future opens wider. Email us for the latest schedules and fees.

← 返回

感谢您的回复。 ✨