Small Group Tutorials

Here to help students catch up, keep up, and move ahead. Book a consultation here.

Top 100 Secondary 3 G2 Vocabulary List for Punggol | Scientific Investigations, Variables and Graphs

Three students sit around open books and worksheets at a classroom table, reading, writing and discussing the work together.

Top 100 Secondary 3 G2 Vocabulary List for Punggol: Scientific Investigations, Variables and Graphs helps students understand experiment questions in Physics, Chemistry and Biology. Start with the investigation chain: ask a testable question, identify the independent and dependent variables, keep important conditions constant, measure correctly, show data clearly and draw a conclusion that the evidence supports. The 100 terms below pair plain meanings with examples across G2 Science.

Parents can often locate an error faster by asking what a graph axis measures or why a particular variable was controlled, rather than beginning with an entire worksheet. This original guide offers vocabulary in ten groups, five worked investigations, twelve practice questions with explained answers, common error repairs and a manageable review routine. It is relevant across the K223, K224 and K225 G2 Science combinations, although each student studies only their actual pairing of disciplines.

  • Core task: plan a fair comparison, measure and record, interpret data, explain conclusions and evaluate methods.
  • For: K223 Physics/Chemistry, K224 Physics/Biology and K225 Chemistry/Biology at G2 level.
  • Includes: 100 distinct numbered terms, original applications, graphs and numerical examples.
  • Do first: read the labels and units before calculating a gradient or comparing readings.
  • Scope note: eduKate’s teaching selection supports the 2027 syllabus’s Practices of Science and assessment objectives; it is not a prescribed SEAB word list.
  • Safety: hypothetical exercises are paper-based; conduct real practical work only under proper school supervision.

Choose a starting point

1. Why experiment vocabulary matters

The 2027 SEAB G2 Science syllabus describes the Practices of Science, assessment objectives for handling information and solving problems, and experimental skills. Students may be asked to select techniques, read scales and tables, plot graphs, determine gradients or intercepts, explain trends and evaluate methods. The syllabus also includes a glossary of common command words. These skills matter in Physics, Chemistry and Biology questions even when the question’s apparatus or situation is unfamiliar.

The ten groups below are organised around a learner’s workflow rather than a prediction of likely examination questions. Some entries are central assessment language; other terms offer helpful context for discussing evidence accurately. The actual applicable examination-year syllabus and the school teacher’s lesson instructions remain the authority for the student’s course.

2. The 100 science investigation terms

1. Questions, hypotheses and fair comparisons

TermPlain meaningApplied example
1. InvestigationAn organised process of asking and testing a scientific question.A school task can test how a measured response changes under stated conditions.
2. Research questionThe specific question an investigation aims to answer.Ask how changing one factor affects a measured quantity.
3. AimA brief statement of what an investigation intends to find out.The aim can be to compare two materials’ rates of cooling.
4. HypothesisA testable proposed explanation or relationship.A hypothesis predicts what will change and gives a scientific reason.
5. PredictionA statement of an expected result based on a model or evidence.Predict a trend before looking at the fictional data.
6. Independent variableThe factor deliberately changed by the investigator.In a controlled cooling study, it might be the insulation material.
7. Dependent variableThe response that is measured or observed.Measure temperature change after a stated interval.
8. Controlled variableA relevant condition kept consistent between trials.Keep starting temperature and container size comparable.
9. Fair testA comparison designed so unwanted differences do not confuse its result.Changing material and liquid amount together prevents a simple one-factor conclusion.
10. Control conditionA reference arrangement against which a changed condition is compared.An uninsulated container could be the control in a cooling comparison.
Questions, hypotheses and fair comparisons

Define the question before designing the procedure. A clear method says what changes, what is measured and what is kept steady.

2. Quantities, units and precision

TermPlain meaningApplied example
11. Physical quantityA measurable property described by a number and suitable unit.A length measurement is incomplete if its unit is omitted.
12. SI unitA unit from the International System of Units.Use seconds and metres when applying standard speed equations.
13. Unit conversionChanging a quantity’s unit without changing the physical quantity.250 cm equals 2.50 m, not 0.250 m.
14. MagnitudeThe size of a quantity, distinct from direction when relevant.A force magnitude of 5 N does not specify whether it acts left or right.
15. ResolutionThe smallest change a measuring instrument can distinguish.A scale with 1-mm divisions is less fine than one with 0.1-mm divisions.
16. PrecisionCloseness of repeated measurements to one another.Three near-identical readings show agreement, not necessarily freedom from bias.
17. AccuracyCloseness of a measurement to the true or accepted value.A mis-zeroed balance can give precise but inaccurate results.
18. Zero errorA non-zero reading when an instrument should show zero.Check the reading before placing material on the balance.
19. Parallax errorA reading error caused by looking from the wrong viewing direction.Read a meniscus at eye level to reduce parallax.
20. Measurement uncertaintyA statement of the limits on confidence in a measured value.A measurement should not imply more precision than the instrument allows.
Quantities, units and precision

An apparently precise number can still be inaccurate. Match the number of decimal places to the equipment and task.

3. Apparatus and reading instruments

TermPlain meaningApplied example
21. Metre ruleA graduated ruler used for measuring lengths.Place the object along the scale and read both ends correctly.
22. Vernier calipersAn instrument for measuring external, internal and depth dimensions on suitable objects.Read the main and vernier scales when the question supplies them.
23. Micrometer screw gaugeAn instrument used for small dimensions such as wire diameter.Check zero and instrument resolution before reporting a value.
24. Electronic balanceAn instrument measuring mass and displaying a numerical value.Zero it according to laboratory instructions before taking a reading.
25. Measuring cylinderA graduated container for measuring volume.Use the correct graduated scale and inspect the meniscus.
26. ThermometerAn instrument measuring temperature.Read the unit and allow proper measurement conditions in a given procedure.
27. StopwatchA device for measuring elapsed time.A human start-stop delay can affect short intervals.
28. AmmeterAn instrument for measuring current.In a paper circuit diagram it is placed in series with the measured branch.
29. VoltmeterAn instrument for measuring potential difference.It connects across the component in a circuit diagram.
30. Gas syringeAn apparatus used to collect and measure gas volume in suitable experiments.Read the piston position from a supplied drawing; do not handle gases without supervision.
Apparatus and reading instruments

An apparatus name is useful when it is paired with the quantity it measures and how the supplied diagram is read.

4. Procedures, control and safe practice

TermPlain meaningApplied example
31. ProcedureAn ordered set of actions used in a practical investigation.Specify what is changed, what is measured and when it is recorded.
32. TrialOne instance of a measurement or test under stated conditions.A single trial is evidence but does not reveal how variable readings are.
33. RepeatA further measurement under comparable conditions.Repeated results can help assess random variation.
34. ReplicationIndependent repetition of a procedure or study under suitable conditions.Replication differs from copying the same number into a data table.
35. CalibrationChecking or adjusting how an instrument’s output corresponds to known references.A systematic offset requires correction, not simply more repeats.
36. SamplingSelecting part of a population or set for observation.Samples should be appropriate to the question being asked.
37. HazardSomething with potential to cause harm.A hot surface is a hazard even when nobody has touched it.
38. RiskThe likelihood and severity of harm under particular conditions.Risk depends on exposure and protective measures, not just the hazard’s name.
39. Safety precautionA measure reducing avoidable risk during a practical task.Follow the teacher’s instructions for eye protection and handling hot apparatus.
40. SupervisionOversight by an authorised person during practical work.Chemical, electrical and biological procedures require appropriate school safeguards.
Procedures, control and safe practice

Laboratory safety is part of the method, not an afterthought. This guide describes concepts; it is not a substitute for trained supervision.

5. Tables, raw readings and summaries

TermPlain meaningApplied example
41. Raw dataMeasurements or observations before processing.Record actual readings rather than replacing them with rounded averages at the start.
42. Data tableA structured arrangement of readings with clear labels.Put the changed factor and the measured response in separate columns.
43. Column headingThe label describing the quantity in a table column.Include the quantity name and an appropriate unit.
44. Trial numberA label distinguishing repeated readings.Trial 1 and trial 2 may differ even when conditions are intended to match.
45. MeanThe sum of values divided by their number.For readings 10, 12 and 14, the mean is 12.
46. MedianThe middle value after the observations are placed in order.For 5, 6 and 12, the median is 6.
47. RangeThe difference between the largest and smallest values.Values 2.1 to 2.7 have a range of 0.6 in the stated unit.
48. Anomalous resultA reading that appears inconsistent with other measurements or the expected pattern.Investigate possible reasons before deciding how to treat it.
49. Missing valueA reading not supplied or not obtained.Do not invent data; indicate the missing value explicitly.
50. Calculated valueA quantity derived from given measurements using a stated method.A speed may be calculated from distance divided by time.
Tables, raw readings and summaries

Record actual observations first. A mean can summarise appropriate repeats, but it must not hide missing data.

6. Graphs and mathematical interpretation

TermPlain meaningApplied example
51. Horizontal axisThe x-axis, often used for the independent variable.Label time on the horizontal axis for a simple time-response graph.
52. Vertical axisThe y-axis, often used for the dependent variable.Label measured temperature on the vertical axis with units.
53. ScaleThe numerical spacing used along a graph axis.Choose even intervals that display the supplied data clearly.
54. Plot pointA location on a graph representing a pair of values.A point at (3 s, 6 m) has both coordinates.
55. Line of best fitA line representing the overall pattern of suitable plotted data.It need not pass through every noisy measured point.
56. GradientChange in vertical quantity divided by change in horizontal quantity.For a distance–time graph, the gradient can represent speed.
57. InterceptWhere a graph meets an axis.A non-zero y-intercept may indicate an initial value in the model.
58. TrendThe general direction or pattern of a series of results.Identify an increase, decrease or plateau from the data shown.
59. OutlierA value far from other observations or the general relationship.Check whether it reflects an error, real variation or a different condition.
60. Graph originThe point where the two axes meet, conventionally (0,0).Do not force an experimental line through the origin without a reason.
Graphs and mathematical interpretation

Always read both axes. A gradient is a rate only when the plotted quantities and units make it one.

7. Observations, explanations and evidence

TermPlain meaningApplied example
61. ObservationA description of what is measured or seen without assigning an unsupported cause.Report that the colour changed before naming the chemical process.
62. InferenceA reasoned interpretation based on observations and scientific knowledge.A measured trend may suggest an influence but needs context.
63. EvidenceInformation used to support or challenge a statement.Refer to specific results rather than writing ‘the data shows’ with no detail.
64. ClaimA statement whose support can be assessed.‘Material A insulates better’ is a claim requiring comparative evidence.
65. Scientific modelA simplified representation used to explain or predict aspects of a system.The particle model explains observations but is not a photograph of each particle.
66. CausationA relationship in which one factor brings about an effect.A well-controlled comparison offers stronger causal evidence than a simple association.
67. CorrelationA statistical association between variables.Two measurements rising together do not automatically prove that one causes the other.
68. LimitationA weakness or boundary of a method, dataset or inference.A small range of tested temperatures limits conclusions beyond that range.
69. EvaluationAssessing the quality and implications of the method or result.Identify a meaningful strength, weakness and possible improvement.
70. Evidence-based conclusionA summary supported by the recorded data and conditions.State the observed change and the extent of the tested range.
Observations, explanations and evidence

An explanation connects a result with a mechanism. A conclusion should not claim more than was measured.

8. Command words in Science questions

TermPlain meaningApplied example
71. StateGive the requested information concisely.State the unit or named process without adding unrelated explanation.
72. DefineGive the precise meaning of a specified scientific term.Define speed as distance travelled per unit time.
73. DescribeProvide relevant features or the sequence of what happens.Describe a graph by naming its trend and relevant quantities.
74. ExplainGive reasons and connect cause with result.Explain how a thin exchange surface supports diffusion.
75. CompareIdentify relevant similarities and differences.Compare two readings under the same conditions.
76. PredictState what is expected from the model or evidence.Predict the direction of a change when one specified factor varies.
77. SuggestPropose a scientifically plausible answer from the information supplied.Suggest a control variable and justify why it matters.
78. DeduceWork out a conclusion logically from the provided information.Deduce the identity of a gas from its standard test and observation.
79. CalculateWork out a numerical answer using a suitable relationship.Show the substitution and give a correct unit.
80. DetermineFind a value or answer from data or a suitable method.Determine a graph gradient from two points on a fitted line.
Command words in Science questions

Command words specify different outputs. A short ‘state’ answer may be sufficient where ‘explain’ needs a reason.

9. Sources of error and reliability

TermPlain meaningApplied example
81. Random errorUnpredictable variation causing results to scatter.Reaction-time variation may change repeated stopwatch readings.
82. Systematic errorA consistent bias affecting measurements in a similar direction.An uncorrected zero error can shift every balance reading.
83. BiasA distortion that favours one type of result or conclusion.A poorly chosen sample may not represent the population.
84. ReliabilityConsistency of a result or procedure under suitable repetition.Close repeats increase confidence but do not by themselves guarantee correctness.
85. ValidityWhether a method measures or tests what it claims.A test with two changing factors cannot isolate one factor’s effect.
86. RepeatabilityAbility to obtain similar results under comparable repeated conditions.The same observer and apparatus may give comparable measurements.
87. ReproducibilityAgreement of results under appropriately changed operators or settings.Different groups following a clear method can compare results.
88. Sample sizeThe number of observations or items included.One leaf cannot automatically represent every plant.
89. Confounding factorAnother influence that may change the observed response.A nearby lamp may change temperature as well as light intensity.
90. ImprovementA justified change that addresses a specified weakness.If parallax is likely, improve viewing position rather than only repeating readings.
Sources of error and reliability

Repeating measurements can reveal random variation; it does not remove a consistent zero error.

10. Using information responsibly

TermPlain meaningApplied example
91. TransparencyClear reporting of methods, results and changes to data.Keep recorded readings visible rather than replacing them with hoped-for values.
92. IntegrityHonest handling of observations, calculations and limitations.Do not fabricate missing trial readings.
93. ObjectivityJudging results without choosing evidence only because it supports a preference.Report an unexpected result and examine it fairly.
94. AssumptionA condition accepted for a simplified analysis.State that resistance is constant if using a simple Ohm’s-law model.
95. Uncertainty statementA description of how limited the measured or inferred value is.A graph estimate should not be presented with unwarranted precision.
96. ProportionalityA mathematical relationship with a constant ratio, when applicable.Double the x-value and y-value only when a direct proportion is established.
97. Direct proportionA relationship in which the ratio of two quantities remains constant.At fixed area, doubling normal force doubles pressure.
98. Inverse proportionA relationship in which the product of two quantities remains constant.For fixed pressure-related force, increasing area reduces pressure.
99. Transfer of learningApplying a familiar scientific principle to a new situation.Use the same gradient idea on unfamiliar graph labels after checking units.
100. Next-step correctionA focused revision aimed at the first identifiable error.Repair a wrong unit conversion before assigning another full question set.
Using information responsibly

Good science keeps the reasoning transparent and corrects the identified weakness rather than concealing it.

3. Five worked investigations and graph readings

Case 1: make an insulation comparison fair

A fictional class compares how two coverings affect cooling. Container A begins at 65°C and finishes at 57°C after five minutes; B begins at 65°C and finishes at 51°C. Worked interpretation: A drops 8°C while B drops 14°C, so A shows the smaller temperature decrease over the measured interval. For a fair comparison, keep liquid volume, container dimensions, starting temperature and room conditions comparable. These two readings alone do not prove that all kinds of energy transfer have stopped.

Case 2: interpret a straight-line graph

A plotted distance–time line passes through (1 s, 3 m) and (5 s, 11 m) for an object moving in one direction. Worked answer: gradient = (11 − 3) ÷ (5 − 1) = 8 ÷ 4 = 2 m/s. Because the line is straight, the speed along this segment is constant. Dividing the second position by the second time would fail to calculate the specified graph gradient.

Case 3: explain what a mean hides and reveals

A sample’s repeated mass readings are 12.1 g, 11.9 g and 12.0 g. Worked answer: mean = (12.1 + 11.9 + 12.0) ÷ 3 = 12.0 g. Range = 12.1 − 11.9 = 0.2 g. These readings agree closely, but the data alone do not show whether the balance was properly zeroed. A systematic zero error could shift them all.

Case 4: choose the variable that actually tests the question

Suppose a study asks whether light intensity affects a plant’s measured photosynthesis indicator. The independent variable is light intensity; the dependent variable might be oxygen output per minute. Keep plant material, time interval, carbon dioxide conditions and temperature as comparable as feasible. If a warmer lamp changes temperature along with intensity, temperature is a potential confounding factor. A trend would need that limitation discussed.

Case 5: avoid inventing values beyond a dataset

A fictional dataset gives reaction times of 4, 6 and 8 minutes at three supplied temperatures. The student writes that doubling temperature always halves reaction time. Improved reasoning: first check whether the numbers establish that relation over the observed range, and do not extend it to temperatures not tested. If another factor changes between trials, the apparent effect may not come from temperature alone. Cite the actual results and limits.

4. Twelve practice questions with explained answers

1. What is an independent variable?

Answer: The factor deliberately changed to test its effect on a measured response.

2. What is a dependent variable?

Answer: The quantity observed or measured in response to the changed factor.

3. Why is changing two important factors together a problem?

Answer: The result may not show which factor caused the difference. That weakens the comparison’s validity.

4. A balance reads 0.3 g when empty. What issue should be checked?

Answer: A zero error. Repeated readings do not automatically correct a consistent offset.

5. A cylinder contains 35 cm³ after an object is fully submerged; initially it held 20 cm³. What is the object’s volume in the suitable displacement model?

Answer: 35 − 20 = 15 cm³, assuming the object is suitably non-absorbing and fully submerged without trapped air.

6. An object moves 18 m in 6 s at uniform speed. Find the speed.

Answer: 18 ÷ 6 = 3 m/s, including units.

7. Three readings are 9, 11 and 13. Find the mean and range.

Answer: Mean = 33 ÷ 3 = 11. Range = 13 − 9 = 4 in the stated unit.

8. On a graph, x is time in s and y is distance in m. What unit does its gradient have?

Answer: Metres per second (m/s), because gradient divides distance change by time change.

9. Two variables rise together. Must one cause the other?

Answer: No. Correlation does not automatically establish causation; investigate relevant confounding factors and conditions.

10. A student says, ‘The data proves all plastics are insulators’ after testing one sample. What is the problem?

Answer: The claim exceeds the data. A result for one sample under one setup does not establish a universal claim about all plastics.

11. How do ‘state’ and ‘explain’ differ in answering?

Answer: State gives the requested item concisely; explain connects facts and mechanisms to show why something occurs.

12. What should be done with a measurement far from repeated results?

Answer: Check the method, raw record and possible causes; do not discard or edit it simply because it is inconvenient.

These are original practice tasks, not past examination questions. Describing a method and reading a supplied diagram never requires unsupervised access to laboratory chemicals, electrical apparatus or biological specimens.

5. How to make practical questions easier to correct

For a ten-minute probe, ask a learner to label the independent and dependent variables in one school question, identify two necessary controls, read a short data table and write one supported conclusion. Then ask for one limitation that would matter. This reveals whether the student needs more vocabulary, measurement practice, graph work or a clearer reasoning chain.

Use an error record with three columns: the original answer, the precise error and one repaired explanation. Examples: “I put time on the wrong axis”; “I used a scale without units”; “I assumed correlation proved causation.” Follow each correction with a different small dataset. The goal is transferable reasoning, not copying a model answer.

Parents can ask “What did you change?”, “What was measured?”, “What else could affect the result?”, and “Which evidence supports your conclusion?” Give the student time to answer. A correct short explanation is better than a long paragraph of familiar terms with no relationship to the data.

Related study routes: Motion, Forces and Energy for numerical practice; Particles, Reactions and Materials for Chemistry descriptions; Cells, Nutrition and Human Body Systems for Biology diagrams. Select the one corresponding to the student’s actual combination and learning gap.

6. Official references and scope

References checked 17 November 2026. The 100-word selection, examples, graph points, worked cases and practice answers are original eduKate educational writing. The official examination-year syllabus and school laboratory rules take precedence for particular requirements or procedures.

Continue from here: Start Here · Tuition · Education · Pathways · Parenting 101 · All Site Routes

eduKate Punggol

Contact

83 Punggol Central, Singapore 828761

edu|Kate Bukit Timah

8 Fourth Avenue, Singapore 268674

By Appointment +65 8823 1234
admin@edukatesg.com

Email Us

When a child finally understands, school becomes less frightening and the future opens wider. Email us for the latest schedules and fees.