Small Group Tutorials

Here to help students catch up, keep up, and move ahead. Book a consultation here.

Top 100 Secondary 3 G1 Vocabulary List for Punggol | Science Investigations, Evidence and Results

Three students in school uniforms work through open books at a classroom table, with textbooks and stationery nearby and study notes on the whiteboard behind them.

This Top 100 Secondary 3 G1 Vocabulary List for Punggol helps students read science-related information, understand results tables and write evidence-based explanations in accurate English. It provides 100 words with simple definitions and original examples, then uses a fictional investigation to teach the difference between a measurement, a conclusion and an unsupported claim.

The word bank is an independent eduKate selection for G1 English reading, writing, listening and spoken communication, not an official SEAB Science vocabulary list or an examination prediction. All measurements and experimental results are invented for learning. Students should follow their own school’s instructions and consult the syllabus for their actual examination year.

  • Vocabulary: 100 distinct words in ten groups covering questions, instruments, measurements, conditions, evidence and conclusions.
  • Reading: interpret an original results table, understand the unit, calculate a mean and avoid unsupported causal claims.
  • Writing: improve a vague investigation method and revise an exaggerated conclusion.
  • Practice: diagnostic, comprehension, cloze, grammar, listening and oral tasks with explained answers.
  • Parents: focused repairs that help children read and explain unfamiliar data independently.

Find your next learning step

Contents

1. What this English guide teaches about evidence

This is a G1 English reading and communication guide, not an official Science practical assessment. The 2027 SEAB SEC G1 index lists English Language K100 and Science K123 as separate subjects. The English Language K100 syllabus expects accurate understanding of written, audio and multimodal information and the ability to communicate clearly for different purposes. The 100 words and classroom test in this article are eduKate’s own teaching choices.

Scientific inquiry provides useful material for such language practice. MOE’s earlier secondary Science teaching syllabus describes inquiry through questions, evidence and explanations; it is background, not the 2027 K123 examination specification. Readers should check the current syllabus for their actual Science course and examination year.

The figures and the classroom paper experiment below are completely invented. They teach how to read a table, choose a relevant word and write a limited conclusion. They are not published research findings, a recommendation to purchase paper, or a set of lab procedures to perform without teacher supervision.

A student entering Secondary 3 in 2027 would ordinarily prepare for a later examination sitting. The linked 2027 syllabus is a current reference, not a promise that subsequent requirements will be unchanged. Use the school’s actual work and the applicable examination-year materials.

Back to contents

2. Top 100 words for investigations, observations and results

Use the ten clusters in order or begin with the cluster matching the student’s current difficulty. Each headword comes with a plain-language meaning and one original sentence. Students should then explain a fresh example without looking at the definition. The target is independent control of meaning, not merely an impressive word count.

1–10: Frame a useful question

No. and wordMeaning and original example
1. inquiryMeaning: A process of asking questions and seeking answers.
Example: The inquiry begins with a question about two paper samples.
2. investigationMeaning: A planned attempt to find out how something works or what happens.
Example: The investigation compares how quickly two materials absorb water.
3. experimentMeaning: A test performed under planned conditions to examine a question.
Example: The fictional experiment uses the same amount of water in each trial.
4. questionMeaning: Something asked in order to obtain information.
Example: The question is which sample absorbs the water more quickly in this setup.
5. hypothesisMeaning: A proposed explanation that can be examined using evidence.
Example: The hypothesis predicts a difference between the paper samples.
6. aimMeaning: The purpose of an activity or study.
Example: The aim is to compare the recorded times under specified conditions.
7. predictionMeaning: A statement about what may happen, made before observing the result.
Example: The prediction is that Sample B will absorb the water faster.
8. variableMeaning: A factor that may change or be changed in an investigation.
Example: The type of paper is one variable in the invented task.
9. observationMeaning: Something noticed and recorded through the senses or an instrument.
Example: The observation is that no visible free water remains at the stated time.
10. evidenceMeaning: Information that supports or challenges a statement.
Example: The repeated timing records provide evidence about the two samples.
Words 1–10: Frame a useful question

11–20: Name the materials and equipment

No. and wordMeaning and original example
11. apparatusMeaning: Equipment used for a practical task or investigation.
Example: The apparatus includes a clean tray and a measuring cylinder.
12. instrumentMeaning: A tool or device used to measure or examine something.
Example: The stopwatch is an instrument for measuring elapsed time.
13. containerMeaning: An object used to hold something.
Example: A labelled container holds the water for the demonstration.
14. beakerMeaning: A laboratory vessel used for holding or mixing liquids.
Example: The beaker in the diagram is not used as a precise timing device.
15. cylinderMeaning: A tube-shaped object, including a measuring vessel.
Example: The measuring cylinder shows the liquid volume.
16. thermometerMeaning: An instrument used to measure temperature.
Example: The thermometer is not needed for the fictional paper test.
17. stopwatchMeaning: A device for measuring time intervals.
Example: The stopwatch records seconds for each trial.
18. rulerMeaning: A tool for measuring straight lengths.
Example: The ruler checks that the paper squares have equal sides.
19. materialMeaning: The substance from which an object or sample is made.
Example: The two paper materials are compared using the same procedure.
20. sampleMeaning: A small quantity or part selected for examination.
Example: Each sample is a square of paper prepared for one trial.
Words 11–20: Name the materials and equipment

21–30: Describe practical actions

No. and wordMeaning and original example
21. measureMeaning: Find the value or amount of something using a suitable method.
Example: Measure the water volume before each trial.
22. recordMeaning: Write down or save information for later use.
Example: Record each time in the table.
23. observeMeaning: Look or listen carefully to notice what occurs.
Example: Observe whether free water is still visible.
24. compareMeaning: Examine two or more things for similarities and differences.
Example: Compare the mean times for Sample A and Sample B.
25. repeatMeaning: Do something again.
Example: Repeat the trial rather than relying on a single timing.
26. controlMeaning: Keep a condition steady or manage a factor during a test.
Example: Control the paper size so the samples are comparable.
27. adjustMeaning: Change something slightly to make it suitable.
Example: Adjust the wording of the procedure to remove ambiguity.
28. calculateMeaning: Use arithmetic to find a number.
Example: Calculate the mean time for each sample.
29. collectMeaning: Gather information or materials for a purpose.
Example: Collect the timing results from the three trials.
30. organiseMeaning: Arrange information in a clear order or structure.
Example: Organise the readings by sample and trial.
Words 21–30: Describe practical actions

31–40: Read charts, tables and numbers

No. and wordMeaning and original example
31. dataMeaning: Recorded measurements, observations or facts.
Example: The data consist of three times for each paper sample.
32. resultMeaning: An outcome or value from a test or calculation.
Example: The result of Trial 1 for Sample A is twenty seconds.
33. tableMeaning: Information organised into rows and columns.
Example: The table separates the two sample types.
34. chartMeaning: A visual display used to present information.
Example: The chart compares the times for each sample.
35. graphMeaning: A diagram showing numerical information or relationships.
Example: The graph uses a suitable scale for time.
36. axisMeaning: A reference line used to show values on a graph.
Example: The vertical axis represents time in seconds.
37. scaleMeaning: The numbered system used to read measurements or a graph.
Example: The scale increases by five seconds at each major mark.
38. unitMeaning: A standard quantity used to express a measurement.
Example: The unit of time is seconds.
39. amountMeaning: A quantity of something.
Example: The amount of water is ten millilitres in every trial.
40. quantityMeaning: A number or measured amount.
Example: The quantity is stated before the result is compared.
Words 31–40: Read charts, tables and numbers

41–50: Describe how strong a result is

No. and wordMeaning and original example
41. accurateMeaning: Close to the correct or true value.
Example: An accurate answer uses the times actually recorded.
42. preciseMeaning: Exact or detailed enough for the intended purpose.
Example: A precise report states twenty-two seconds, not just slow.
43. reliableMeaning: Dependable for the stated purpose.
Example: More well-controlled trials can help assess whether a pattern is reliable.
44. consistentMeaning: Remaining similar across repeated observations or reports.
Example: Sample B’s recorded times are fairly consistent.
45. fairMeaning: Using conditions that allow a meaningful comparison.
Example: The comparison is fairer when paper size and water amount are kept the same.
46. errorMeaning: A mistake or difference that affects an observation or result.
Example: Starting the stopwatch late could introduce an error.
47. limitationMeaning: A weakness or boundary affecting what a method or result can show.
Example: The small number of trials is one limitation.
48. uncertaintyMeaning: Lack of complete knowledge or exactness.
Example: There is uncertainty about when the last visible water disappears.
49. estimateMeaning: Make a sensible approximate judgement.
Example: Estimate the mean before checking with calculation.
50. verifyMeaning: Check whether information is correct.
Example: Verify the arithmetic before writing the conclusion.
Words 41–50: Describe how strong a result is

51–60: Talk about factors and conditions

No. and wordMeaning and original example
51. causeMeaning: Something that makes an event or result happen.
Example: The timing data alone do not prove every possible cause.
52. effectMeaning: A change resulting from an action or factor.
Example: One possible effect of material differences is a change in absorption time.
53. influenceMeaning: Change or affect how something happens.
Example: The fold of a paper square could influence the timing.
54. factorMeaning: One element that may affect a result.
Example: The amount of water is a factor the procedure tries to keep fixed.
55. conditionMeaning: A particular situation or requirement under which something happens.
Example: Both samples were tested under the stated conditions.
56. independentMeaning: Not determined by another variable in the planned test; often the deliberately changed factor.
Example: The independent variable is the type of paper in the classroom example.
57. dependentMeaning: Changing in response to another factor in an investigation.
Example: The dependent variable is the measured time.
58. constantMeaning: A condition kept the same throughout a comparison.
Example: The volume of water is treated as a constant.
59. changeMeaning: Become different or make something different.
Example: If the method changes, explain it rather than silently changing the data.
60. differenceMeaning: The amount by which two results or features vary.
Example: The difference between the two mean times is six seconds.
Words 51–60: Talk about factors and conditions

61–70: Describe trends and relationships

No. and wordMeaning and original example
61. increaseMeaning: Become larger in number, amount or degree.
Example: The recorded time may increase if a sample absorbs water more slowly.
62. decreaseMeaning: Become smaller in number, amount or degree.
Example: A decrease would mean a shorter measured time than the previous reading.
63. higherMeaning: Greater in value than a comparison figure.
Example: The mean time for Sample A is higher.
64. lowerMeaning: Smaller in value than another figure.
Example: Sample B has the lower mean time.
65. trendMeaning: A general direction or pattern of change.
Example: A trend requires enough data to describe a direction responsibly.
66. patternMeaning: A repeated or noticeable arrangement in results.
Example: A pattern appears when B is faster in all three listed trials.
67. relationshipMeaning: A connection between factors or measurements.
Example: The investigation examines the relationship between paper type and time.
68. correlationMeaning: A relationship in which values tend to vary together.
Example: Correlation by itself does not prove what caused an outcome.
69. concludeMeaning: Reach a judgement after considering the evidence.
Example: Conclude only that B was faster in the invented trials.
70. supportMeaning: Provide reasons or evidence for a statement.
Example: The table supports a limited comparison of recorded times.
Words 61–70: Describe trends and relationships

71–80: Follow a safety-related notice

No. and wordMeaning and original example
71. safetyMeaning: The condition of being protected from harm.
Example: Safety instructions come before the demonstration.
72. riskMeaning: The possibility of something harmful happening.
Example: Water near electronic devices may create a risk.
73. hazardMeaning: A source of possible harm.
Example: A slippery floor is a hazard after a spill.
74. warningMeaning: A message drawing attention to a danger or restriction.
Example: The warning says to keep the water away from electrical equipment.
75. instructionMeaning: A direction stating what to do.
Example: Follow the supervising teacher’s instruction about materials.
76. protectiveMeaning: Intended to prevent injury or harm.
Example: The teacher identifies whether protective equipment is required.
77. spillMeaning: Liquid that has flowed onto an unintended surface.
Example: Report a spill instead of hiding it.
78. handleMeaning: Use, move or touch something appropriately.
Example: Only handle apparatus when the supervising adult permits it.
79. reportMeaning: Give information about an event or problem.
Example: Report damaged equipment to the teacher.
80. superviseMeaning: Watch and guide an activity to support safe behaviour.
Example: An adult must supervise the actual practical activity.
Words 71–80: Follow a safety-related notice

81–90: Explain what the data may mean

No. and wordMeaning and original example
81. explainMeaning: Make a reason or process clear.
Example: Explain how the measurements answer the question.
82. describeMeaning: State what something is like or what happened.
Example: Describe the difference without guessing at a hidden cause.
83. inferMeaning: Draw a reasoned conclusion from evidence.
Example: Infer that B absorbed more quickly in this specific setup.
84. indicateMeaning: Point towards a possible conclusion.
Example: The data indicate that B took less time in these trials.
85. suggestMeaning: Give an idea or point to a possible explanation.
Example: The results suggest a difference worth investigating further.
86. justifyMeaning: Support a judgement with a clear reason or evidence.
Example: Justify the comparison with values from the table.
87. evaluateMeaning: Judge strengths, limitations or suitability using evidence.
Example: Evaluate whether three trials are sufficient for a broad claim.
88. clarifyMeaning: Make an unclear detail easier to understand.
Example: Clarify what counted as the end of a trial.
89. distinguishMeaning: Recognise and state an important difference.
Example: Distinguish an observation from an explanation.
90. summariseMeaning: Express the most important information briefly.
Example: Summarise the results without listing every trial again.
Words 81–90: Explain what the data may mean

91–100: Write a clear investigation report

No. and wordMeaning and original example
91. introductionMeaning: A beginning that identifies the subject or purpose.
Example: The introduction names the question being investigated.
92. methodMeaning: The planned way of carrying out an activity.
Example: The method keeps the amount of water constant.
93. procedureMeaning: A stated sequence of actions for a task.
Example: The procedure explains when to begin timing.
94. stepMeaning: One action in a planned sequence.
Example: One step is to record the measured time.
95. sequenceMeaning: The order in which events or actions occur.
Example: The sequence should be the same for both samples.
96. findingMeaning: Something learned from examining information.
Example: The key finding is a lower mean time for B in the example.
97. discussionMeaning: A section that explains what results may mean and their limits.
Example: The discussion notes that the endpoint can be difficult to judge.
98. conclusionMeaning: A judgement reached after considering the results.
Example: The conclusion is limited to the specific test conditions.
99. recommendationMeaning: A suggested action based on a reason.
Example: The recommendation is to repeat the test with a clearer endpoint.
100. reflectionMeaning: Careful thought about what was learned and what could improve.
Example: The reflection identifies one source of measurement error.
Words 91–100: Write a clear investigation report

Back to contents

3. Quick diagnostic: read what the table actually establishes

Try these six questions before studying the worked example. No actual apparatus is needed. These items are original teaching checks, not a school practical paper.

  • A chart gives values in seconds. Is ‘seconds’ a unit or a conclusion?
  • An experiment changes both the paper type and the amount of water. Can a student confidently attribute a timing difference only to paper type?
  • What is the difference between a prediction and a finding?
  • One trial gives a result that seems unusual. Is deleting it without explanation a sound way to report the data?
  • What information is needed to calculate a mean for three timings?
  • Does ‘Sample B was faster in the fictional three trials’ mean it must always be faster in every setting?

Answers: (1) Unit. (2) No; multiple factors change, making the cause unclear. (3) A prediction comes before observing the result; a finding reports something learned from evidence. (4) No; anomalies should be documented and evaluated rather than silently erased. (5) The three values and their sum divided by three. (6) No; the evidence supports a limited conclusion under the stated conditions.

If the learner misses the unit, practise nouns and number phrases. If they confuse cause with correlation, practise qualified sentences. If they turn one finding into a universal claim, practise ‘in this test’ and ‘under these conditions’.

Back to contents

4. Worked reading: fictional paper absorption test

All quantities and measurements below are invented for language practice. A fictional class compares two types of equal-sized paper squares on clean trays. Each square receives 10 mL of water at its centre. The stated endpoint is the moment no free water is visible on the tray or paper surface. The same broad procedure is described for each trial. An actual classroom activity would require supervision and a method suitable for the equipment.

Recorded timePaper Sample APaper Sample B
Trial 120 s15 s
Trial 222 s16 s
Trial 324 s17 s
Mean time22 s16 s
Fictional absorption times; s means seconds

Questions and worked explanations

  • What is the investigated question? Which paper sample reaches the stated endpoint sooner under the specified conditions?
  • What changed between the two sets of trials? The type of paper sample.
  • What was the measured outcome? Elapsed time, recorded in seconds until the described endpoint.
  • Name two conditions the description tries to keep the same. Paper-square size and the water volume of 10 mL. Other details such as how the liquid is applied also matter to reproducibility.
  • Which sample has the lower mean time? Sample B, at 16 seconds compared with 22 seconds for A. The difference between means is 6 seconds.
  • How is each mean calculated? A: (20 + 22 + 24) ÷ 3 = 22. B: (15 + 16 + 17) ÷ 3 = 16.
  • Is Sample B lower in each of the three listed trials? Yes: 15 is below 20, 16 below 22 and 17 below 24.
  • Can this data prove that B is the best paper towel everywhere? No. The invented data cover one outcome, small samples and particular conditions; they cannot establish a universal product judgement.
  • What could make the endpoint uncertain? Different observers might disagree about when ‘no visible free water’ is reached. A clearer measurement rule could improve the method.

An answer that says only ‘B is better’ loses important information. The table compares time to the stated endpoint. Lower time indicates a faster result by that definition; it does not prove that B absorbs more total water, is stronger, or is best for every purpose. The dependent measure and limitation belong in the explanation.

When learners can calculate the mean but cannot name what it represents, practise the language of measurements before introducing more complex numbers. When they understand the measure but overlook small sample sizes, practise qualifying a conclusion.

Back to contents

5. Turn a procedure into clear English

Compare the following versions. Vague: ‘Get some paper and water. Do the experiment and see which works.’ This gives neither a reproducible method nor a clear outcome. Improved for reading: ‘Use equal-sized squares of two paper types. Apply a stated volume of water to each sample under the same planned conditions. Record the time until the defined endpoint. Repeat the process and compare the results.’

The improved description names material, controlled conditions, measured outcome, repetition and comparison. It still does not establish a full safe practical method or specify every source of variation. That limitation matters. In this English exercise, students do not need to carry out the activity.

To revise further, ask what ‘apply the water’ means: from what height, at what rate and to which part of the sample? Ask who decides when the endpoint is reached. These are not excuses to make a sentence complicated; they are questions that reveal where meaning is still incomplete.

In a real school practical, the supervising teacher provides the safety instructions. Treat water near electrical equipment as a hazard, and report spills. The reader’s language task is to understand and preserve those directions, not to invent permission to handle apparatus.

Back to contents

6. Worked writing: correct an exaggerated conclusion

First draft: ‘Sample B is the world’s best paper. Scientists have proved that it always absorbs everything quickly. The experiment definitely shows why B is superior.’ The first sentence claims much more than the table measures; the second invents scientists, a universal result and an unstated explanation.

Revised paragraph: ‘In the fictional three-trial investigation, Sample B reached the stated endpoint sooner than Sample A in every trial. The mean time for B was 16 seconds, compared with 22 seconds for A. This is a difference of six seconds under the specified conditions. The data suggest that B was faster in this setup, but the small number of trials and the judgement of the visible endpoint limit a broader conclusion. A more clearly defined endpoint and additional controlled trials could strengthen a later investigation.’

The revision states the result and includes a limitation. Its conclusion follows the measured outcome rather than importing an explanation the experiment did not test. The numbers support the claim directly.

For an independent task, imagine that the trial times are different on a second day. Write a three-sentence progress report explaining the change, one possible source of variation and what should be checked before a conclusion is revised. Use may or could for an uncertain explanation. Keep the report about evidence rather than blaming a student for a result.

Back to contents

7. Science words that are not interchangeable

Observation versus inference: An observation describes what was recorded. An inference explains what the observation may mean. ‘The reading was 16 seconds’ is a stated result; ‘the material structure caused the difference’ is a causal explanation not established by timing alone.

Prediction versus conclusion: A prediction is made before collecting results. A conclusion is written after considering them. The same sentence may happen to match the observed pattern, but the timing and purpose of the statements remain different.

Accuracy versus precision: Accuracy concerns closeness to a correct value. Precision concerns exactness or repeatability, depending on context. Three neatly written decimal places do not make an uncertain measurement automatically accurate.

Controlled versus uncontrolled: A fairer test holds relevant conditions constant where possible. If both the material and water volume change, the comparison cannot isolate the effect of material type.

Correlation versus cause: Two patterns may occur together without proving one produced the other. State the connection shown and investigate causes separately. This is a stretching word: use it when the student’s reading actually requires it.

Back to contents

8. Cloze and sentence repair with explained answers

Fill eight gaps using: hypothesis, control, data, mean, limitation, measured, conclude, verify, equipment, sample. Two words are unused; one gap takes a related form.

The class began with a (1) ______ about which paper would absorb water faster. The students tried to (2) ______ the size of the paper and amount of water. They (3) ______ the elapsed time in seconds. After collecting the (4) ______, they calculated the (5) ______ time for each material. They checked the numbers to (6) ______ their arithmetic. One (7) ______ was that the endpoint could be judged differently by different observers. Therefore, they could only (8) ______ that Sample B was faster under the stated test conditions.

Answers: (1) hypothesis—a proposed explanation or prediction to examine; (2) control—hold factors steady; (3) measured—a past-tense verb describing the action; (4) data—recorded observations; (5) mean—average of the three timings; (6) verify—check correctness; (7) limitation—a restriction on what the result shows; (8) conclude—reach a judgement supported by the evidence. Equipment and sample are unused.

Repair these sentences: ‘The result shows B are faster’ becomes ‘The results show that B was faster in these trials’. ‘They tested three time’ becomes ‘They tested three times’ or ‘They carried out three trials’. ‘There is many error’ becomes ‘There are several possible sources of error’. Notice how the grammar repair also improves accuracy and scope.

Back to contents

9. Listening practice: a change to a trial

Ask a parent, tutor or peer to read this fictional classroom message aloud while the student keeps it covered.

The next demonstration has moved from the science room to Classroom 5. It will still begin at two o’clock. Please bring your worksheet, a pencil and your previous results table. Do not bring water or apparatus; those are provided by the supervising teacher. The demonstration will compare the same two materials, but the number of trials has increased from three to four. Report a spill immediately to the teacher.

  • Which room is current?
  • Has the starting time changed?
  • Name the three items students bring.
  • Who provides the water and apparatus?
  • What has changed about the number of trials?
  • What must happen if water is spilled?

Answers: Classroom 5; no, 2 p.m. remains the start; worksheet, pencil and previous results table; the teacher; trials increase from three to four; report the spill immediately. Underline still, do not and increased in the script. Those small words determine whether a student’s plan is correct.

Back to contents

10. Oral discussion: what makes an experiment fair?

A model response: ‘A fair comparison tries to change one relevant factor while keeping other important conditions the same. In our fictional paper test, we compare the paper types and measure the time until a defined endpoint. We should keep the paper size and water amount the same. Repeated trials help us see whether the difference is consistent. Even then, we should not claim that one material is best for every purpose.’

Ask: ‘If another group gets different results, must someone be dishonest?’ No. Differences may arise from methods, measurement, materials or errors, so the groups should compare procedures and evidence before deciding why. A respectful, evidence-based explanation is stronger than an accusation.

For three-student practice, one learner states the aim, another reads the table and the third questions a limitation. Rotate until each can give an independent conclusion in two or three sentences.

Back to contents

11. Home practice: test understanding without running experiments

Use a simple invented table of three values. Ask the student to identify the unit, the largest and smallest values, the mean and the question those numbers answer. A ten-minute probe usually reveals whether the difficulty is arithmetic, reading, vocabulary or explaining a conclusion.

If a student can calculate but gives an unsupported generalisation, practise ‘in this investigation’ and ‘under these conditions’. If they read a graph incorrectly, check labels and scale. If they know every word but cannot explain what changed, return to the independent and dependent variables using ordinary examples.

For a second session, change one number in the invented table. Ask the student to revise the written conclusion. The task tests flexible reading rather than repetition. Then present a new scenario, such as comparing the time two toy cars take to travel a marked distance in an imagined demonstration, and ask which measurements would be needed. No practical activity is necessary.

Keep the learner’s initial answer and its revision. Mark the precise improvement: ‘added the unit’, ‘named the measured outcome’, ‘limited the claim to three trials’, or ‘described a source of uncertainty’. These are observable language improvements and more useful than a vague judgement of effort.

Back to contents

12. Continue learning and check official references

This word bank is most useful when the student can read a new results table, explain a change clearly and state what remains uncertain. Do not turn a carefully qualified conclusion into an unsupported promise just to sound confident. The reading goal is evidence, the writing goal is accuracy, and the speaking goal is an explanation the listener can follow.

For related language practice, continue with the Environmental Choices and Resource Conservation guide, School Projects, Instructions and Teamwork, or the core Secondary 3 G1 English vocabulary guide. The vocabulary and figures here are original eduKate teaching material, not official examination content.

Back to contents

Continue from here: Start Here · Tuition · Education · Pathways · Parenting 101 · All Site Routes

eduKate Punggol

Contact

83 Punggol Central, Singapore 828761

edu|Kate Bukit Timah

8 Fourth Avenue, Singapore 268674

By Appointment +65 8823 1234
admin@edukatesg.com

Email Us

When a child finally understands, school becomes less frightening and the future opens wider. Email us for the latest schedules and fees.

← 返回

感谢您的回复。 ✨