A useful Secondary 4 G2 Science vocabulary list for Punggol students should help a learner explain a result, read a question accurately and choose the correct scientific relationship. This guide contains 100 carefully selected terms for Science (Physics, Chemistry), syllabus K223 for the 2027 SEC examination, with plain-English meanings, original examples and practice. It is eduKate’s teaching selection, not an official SEAB word list, a frequency ranking or a complete syllabus. The SEAB school-candidate subject register identifies K223 as the Physics and Chemistry combination.
Start with the words behind your child’s recent mistakes. A student who confuses current with potential difference needs a different lesson from one who cannot explain why an ionic substance conducts when molten. Use the tables to identify the missing meaning, then move into the worked examples and answer checks below. For parents considering Secondary 4 G2 Science small groups tuition in Punggol, look for teaching that connects vocabulary with diagrams, calculations and explanations, while checking each student’s own understanding.
- Who this is for: students preparing for Secondary 4 G2 Science (Physics, Chemistry), and parents helping them organise revision.
- What is included: exactly 100 numbered terms, arranged in ten manageable groups, with a meaning and example for every entry.
- What to practise: question instructions, units, motion, forces, energy, particles, circuits, chemical structures, reactions and environmental applications.
- How to begin: select ten unfamiliar terms, explain them aloud, then use them in a short question without looking at the table.
- What makes progress visible: clearer explanations, correct quantities and units, and fewer repeated confusions in new questions.
- What to check with school: the actual Science combination, examination year, topic sequence and corrections already given by the teacher.
- What this guide does not promise: learning one list cannot guarantee a grade or replace the rest of the course.
Choose your reading route
Start with the task you need today, then return to the full guide when you are ready.
- Understand the scope — Check the subject, syllabus year and starting point.
- Learn the 100 terms — Use the numbered lists, meanings and original examples.
- See the words in use — Follow the explanations and worked examples.
- Practise and check — Try the questions before reading the explanations.
- Plan the next lesson — Use the revision route and parent guidance.
Article contents
Chapters 1–6
Chapters 7–12
- 7. Words 41–50: waves, electricity and radioactivity
- 8. Words 51–60: particles and chemical identity
- 9. Words 61–70: solutions and separation
- 10. Words 71–80: bonds, equations and chemical amounts
- 11. Words 81–90: acids, reactions and identifying substances
- 12. Words 91–100: hydrocarbons, materials and air
Chapters 13–19
CHAPTER 1 OF 19
1. Start with the correct Science course
G2 describes a subject level. It should not become a label for a child’s overall ability. This article has a deliberately precise job: help a student use the language of the Physics and Chemistry combination. A learner taking a combination with Biology should use a guide that covers that component as well; memorising more of this list will not supply missing Biology knowledge.
SEAB’s 2027 register lists K223 alongside K224, Science (Physics, Biology), and K225, Science (Chemistry, Biology). It shows 5105 as the reference code for the earlier Physics and Chemistry syllabus. This article is framed for 2027 SEC preparation; it does not rename a 2026 examination as SEC.
The K223 syllabus uses both multiple-choice and structured Physics and Chemistry papers. Experimental understanding still matters. A vocabulary routine should therefore move between identifying a concept, explaining a process and interpreting data, rather than stopping at spelling. Keep the school’s current syllabus document beside the revision plan, especially when using an older assessment book.
Give each term three checks. First, explain its meaning without copying the definition. Second, give an example that fits. Third, use it in an unfamiliar question. A student may recognise “density” immediately but divide volume by mass when the question changes. Recognition has happened; dependable application has not yet happened.
Keep a small vocabulary record with four spaces: the term, the meaning in your own words, an example, and the mistake you must avoid. Leave the last space empty until an actual error appears. This makes the record personal and useful. There is little value in copying a long list of warnings that has no connection to your work.
The tables below contain concise starting explanations. Read symbols as part of the language: the difference between m and m² changes the quantity, while the difference between an atom and an ion changes the charge. Every example is original teaching material. Where a calculation supplies a value such as gravitational field strength, use that stated value.
These words tell you what to produce. Before solving a question, identify its instruction and the information available. A correct scientific fact can still leave the question unanswered if the requested comparison, calculation or explanation is missing.
| No. | Term | Meaning | Example or application |
|---|---|---|---|
| 1 | calculate | Use numerical information and a suitable relationship to work out a value. | Calculate a speed by dividing the total distance by the time, then include the unit. |
| 2 | describe | Set out the relevant features, changes or observations clearly. | Describe the graph by stating that the current increases as the potential difference increases. |
| 3 | explain | Connect what happens with a scientific reason or process. | Explain conduction in a metal by referring to particle vibrations and the movement of free electrons. |
| 4 | compare | Organise similarities and differences around the same feature. | Both substances contain particles, but a gas has much greater spacing between particles than a liquid. |
| 5 | deduce | Reach a conclusion by connecting the information you have been given. | Deduce that A is denser when equal volumes of A and B are compared and A has the greater mass. |
| 6 | predict | Give the expected outcome using the available information and relevant science. | Predict a larger current when potential difference increases across a resistor whose resistance stays constant. |
| 7 | suggest | Offer a scientifically reasonable response that fits the particular situation. | Suggest a wider measuring range when the expected reading exceeds the instrument’s highest marked value. |
| 8 | observation | Something noticed or measured, recorded without adding an unsupported cause. | The liquid became cloudy is an observation; naming the substance causing the cloudiness requires further reasoning. |
| 9 | evidence | Relevant observations or data used to support a scientific claim. | Repeated readings near 2.0 A provide evidence about the current under the stated conditions. |
| 10 | conclusion | The judgement supported by the results and limited to what they show. | Conclude that the tested sample contains an insoluble component when filtration leaves a solid behind. |
Treat quantities and units as a pair. When a graph appears, read both axis labels before interpreting its shape. The same sloping line can represent different physical behaviour on a distance–time graph and on a speed–time graph.
| No. | Term | Meaning | Example or application |
|---|---|---|---|
| 11 | physical quantity | A measurable property expressed using a numerical value and an appropriate unit. | A length of 0.80 m states both the size of the measurement and its unit. |
| 12 | unit | The agreed standard used to express a measurement. | A time of 12 s uses the second; 12 without a unit leaves the quantity unclear. |
| 13 | scalar | A quantity with magnitude but no associated direction. | A speed of 4 m/s is a scalar even when the object follows a curved route. |
| 14 | vector | A quantity that requires both magnitude and direction. | A velocity of 4 m/s east includes information that speed alone does not provide. |
| 15 | distance | The total length of the path travelled. | Walking 30 m forward and 10 m back gives a distance travelled of 40 m. |
| 16 | speed | The distance covered per unit time; average speed uses the whole journey. | A student covering 150 m in 100 s has an average speed of 1.5 m/s. |
| 17 | velocity | The rate of change of displacement, with a direction. | Travelling at 6 m/s north and 6 m/s south involves different velocities despite equal speeds. |
| 18 | acceleration | The change in velocity per unit time. | An increase from 2 m/s to 8 m/s in 3 s gives 2 m/s² acceleration. |
| 19 | gradient | The change in the vertical-axis value divided by the horizontal-axis change. | On a distance–time graph for one-direction motion, a steeper straight line represents a greater speed. |
| 20 | resultant force | The single force representing the combined effect of all forces on a body. | Forces of 7 N right and 3 N left give a resultant of 4 N right. |
A formula is a statement about a relationship. Read it aloud before substituting numbers. This helps reveal whether the question concerns the amount of energy transferred, the rate of transfer, or a force acting on an object.
| No. | Term | Meaning | Example or application |
|---|---|---|---|
| 21 | mass | A measure of how much matter a body contains, usually expressed in kilograms. | A bag with mass 2 kg still has mass 2 kg when moved to a weaker gravitational field. |
| 22 | weight | The gravitational force acting on a body. | A 2 kg object has weight 20 N where gravitational field strength is 10 N/kg. |
| 23 | density | The mass contained in each unit of volume. | A sample with mass 120 g and volume 40 cm³ has density 3 g/cm³. |
| 24 | pressure | The perpendicular force acting on each unit of area. | A 20 N force spread over 0.010 m² produces a pressure of 2000 Pa. |
| 25 | friction | A contact force opposing relative motion, or the tendency to move, between surfaces. | Friction between a shoe and the ground can help a walker avoid slipping. |
| 26 | work done | Energy transferred when a force moves an object through a distance along that force. | A constant 5 N force moving a box 3 m in its direction does 15 J of work. |
| 27 | kinetic energy | The energy associated with an object’s motion. | A 2 kg object moving at 3 m/s has kinetic energy of 9 J. |
| 28 | gravitational potential energy | Energy associated with position in a gravitational field. | Raising 2 kg through 1.5 m transfers 30 J to this store when g is 10 N/kg. |
| 29 | power | The amount of energy transferred, or work done, in each unit of time. | Transferring 60 J in 3 s corresponds to a power of 20 W. |
| 30 | conservation of energy | The principle that energy is transferred between stores rather than created or destroyed. | When a moving object slows through friction, energy is transferred to internal stores in the surroundings. |
Use particle ideas to explain visible changes. Avoid giving the particles the properties of the whole substance: a melting solid does not contain particles that themselves become liquid. The arrangement and movement of particles change.
| No. | Term | Meaning | Example or application |
|---|---|---|---|
| 31 | internal energy | The total energy of particles’ random microscopic motion and their interactions within a system. | A substance can gain internal energy during melting even while its temperature stays constant. |
| 32 | temperature | A measure related to the average kinetic energy of particles in a substance. | A higher temperature does not automatically mean a larger total internal energy than another sample. |
| 33 | conduction | Energy transfer through particle interactions and, in metals, moving free electrons. | A metal spoon transfers energy along its length without the whole spoon moving with that energy. |
| 34 | convection | Energy transfer through the bulk movement of a liquid or gas. | A warmer, less dense region of a fluid can rise while cooler fluid moves into its place. |
| 35 | thermal radiation | Energy transferred by electromagnetic waves because of an object’s temperature. | Thermal radiation can transfer energy across a vacuum, where conduction through matter cannot occur. |
| 36 | thermal equilibrium | A condition in which bodies have the same temperature and no net heating occurs between them. | After sufficient time in contact, two objects may reach thermal equilibrium even though their masses differ. |
| 37 | melting | A change of state from solid to liquid. | Ice becoming liquid water is melting; the substance remains water during the physical change. |
| 38 | evaporation | The escape of particles from a liquid surface into the gas phase. | Water on a wet cloth can evaporate while its temperature is below the boiling point. |
| 39 | boiling | Vaporisation throughout a liquid at its boiling point for the prevailing pressure. | Bubbles form within boiling water, whereas evaporation can take place only at the exposed surface. |
| 40 | condensation | A change of state from gas or vapour to liquid. | Water vapour from the air can condense on a sufficiently cold surface as liquid droplets. |
Keep the measured property separate from the object or process. Frequency concerns repeated cycles; current concerns charge moving past a point. For circuits, trace connections rather than judging whether a drawing looks like a straight line or a rectangle.
| No. | Term | Meaning | Example or application |
|---|---|---|---|
| 41 | amplitude | The greatest displacement of an oscillating point from its equilibrium position. | Measure a wave’s amplitude from the centre line to a crest, not from crest to trough. |
| 42 | wavelength | The distance between consecutive equivalent points on a wave, such as adjacent crests. | If neighbouring crests are 0.50 m apart, the wavelength is 0.50 m. |
| 43 | frequency | The number of complete cycles in each second, measured in hertz. | A source completing 20 oscillations each second has a frequency of 20 Hz. |
| 44 | electric charge | A property that can be positive or negative, measured in coulombs. | A current of 2 A transfers 6 C of charge past a point in 3 s. |
| 45 | current | The amount of electric charge passing a point per unit time. | If 10 C passes in 5 s, the current is 2 A; it is not 2 V. |
| 46 | potential difference | Energy transferred per unit charge between two points, measured in volts. | A component transferring 12 J for every 3 C passing through it has a potential difference of 4 V. |
| 47 | resistance | A measure of opposition to current, calculated as potential difference divided by current. | A component with 2 V across it and 0.5 A through it has resistance 4 Ω. |
| 48 | series circuit | A circuit arrangement in which connected components share one current path. | The current through two lamps in the same simple series loop is equal. |
| 49 | parallel circuit | An arrangement with branches connected across the same pair of junctions. | Each branch has the same potential difference, while current from the source divides between branches. |
| 50 | half-life | The time for the number of undecayed radioactive nuclei in a sample to halve on average. | After one half-life, a large collection initially containing 800 undecayed nuclei would contain about 400. |
A particle diagram asks you to read relationships. Different colours or labels may represent different elements; touching circles may represent bonds. Check the key first. A group of identical atoms can represent a molecule of an element, not necessarily a compound.
| No. | Term | Meaning | Example or application |
|---|---|---|---|
| 51 | atom | The smallest particle of an element that retains its chemical identity. | A neutral sodium atom has equal numbers of protons and electrons before it forms an ion. |
| 52 | element | A substance whose atoms all have the same proton number. | Oxygen gas is an element even though its particles commonly occur as pairs of bonded atoms. |
| 53 | compound | A substance containing different elements chemically combined in a fixed ratio. | Water contains hydrogen and oxygen in a fixed atomic ratio of two to one. |
| 54 | mixture | Two or more substances together without being chemically combined into one substance. | Air contains several gases; their particles have not all joined to form one giant compound. |
| 55 | molecule | An electrically neutral, discrete group of two or more atoms chemically bonded together. | An oxygen molecule contains two oxygen atoms; a water molecule contains atoms of two different elements. |
| 56 | proton | A positively charged particle in an atom’s nucleus. | An atom with seven protons belongs to nitrogen, regardless of its number of neutrons. |
| 57 | neutron | An electrically neutral particle found in the nucleus of most atoms. | An atom with nucleon number 23 and proton number 11 contains 12 neutrons. |
| 58 | electron | A negatively charged particle arranged outside the atomic nucleus. | When a neutral sodium atom loses one electron, it becomes a positively charged sodium ion. |
| 59 | isotope | An atom of an element with a particular neutron number; isotopes of one element differ in neutrons. | Carbon-12 and carbon-14 have the same proton number but different numbers of neutrons. |
| 60 | ion | An atom or group of atoms carrying an overall electric charge. | A magnesium ion, Mg²⁺, has two fewer electrons than a neutral magnesium atom. |
Choose a separation method by identifying the property that differs between components. Ask whether the solid dissolves, whether the liquid is to be recovered, and whether boiling points or movement through a material can help separate the substances.
| No. | Term | Meaning | Example or application |
|---|---|---|---|
| 61 | solute | A substance dissolved in another substance to form a solution. | In a sugar solution, the dissolved sugar is the solute even though individual sugar particles cannot be seen. |
| 62 | solvent | The substance in which a solute dissolves. | Water acts as the solvent in salt water, but it does not dissolve every possible substance. |
| 63 | solution | A uniform mixture formed when a solute dissolves in a solvent. | A clear salt solution still contains dissolved material; clear does not mean chemically pure. |
| 64 | soluble | Able to dissolve to an appreciable extent in a specified solvent under stated conditions. | Saying a substance is soluble should identify the solvent, such as soluble in water. |
| 65 | filtration | Separating an insoluble solid from a fluid by passing the mixture through a filter. | Filtering sand and water retains sand; ordinary filter paper does not remove dissolved salt. |
| 66 | residue | Material remaining after a process; in filtration, the solid retained by the filter. | Sand left on the filter paper is the residue, while the collected liquid has another name. |
| 67 | filtrate | The fluid that has passed through a filter. | The filtrate from a sand-and-salt-water mixture may still contain dissolved salt. |
| 68 | crystallisation | Producing solid crystals from a solution, often by cooling or removing some solvent. | Crystals forming as a concentrated solution cools illustrate the separation of a dissolved solid. |
| 69 | distillation | Separating and collecting a volatile component through vaporisation followed by condensation. | Distillation can recover water from a salt solution while the dissolved salt remains behind. |
| 70 | chromatography | Separation based on components moving differently between a stationary material and a moving phase. | Several separated dye spots from one ink sample indicate that the original ink contains multiple components. |
Chemical symbols carry information that ordinary words can hide. Read a formula before calculating its mass. A subscript belongs to the substance’s formula; a coefficient tells you how many units of that substance are represented in an equation.
| No. | Term | Meaning | Example or application |
|---|---|---|---|
| 71 | ionic bond | The electrostatic attraction holding oppositely charged ions together. | Electron transfer can form Na⁺ and Cl⁻; the attraction between opposite ions is the ionic bonding. |
| 72 | covalent bond | A bond involving a shared pair of electrons between atoms. | Two hydrogen atoms share one pair of electrons in a hydrogen molecule. |
| 73 | electronic configuration | The arrangement of an atom’s or ion’s electrons in shells or energy levels. | The shell arrangement 2,8,1 describes the eleven electrons in a neutral sodium atom. |
| 74 | chemical formula | Symbols showing the elements and their relative numbers in a substance. | MgCl₂ indicates one magnesium for every two chlorine atoms in the compound’s formula. |
| 75 | balanced equation | A chemical equation with equal numbers of each type of atom on both sides. | In 2Mg + O₂ → 2MgO, both sides represent two magnesium atoms and two oxygen atoms. |
| 76 | reactant | A starting substance that participates in a chemical reaction. | Magnesium and oxygen are reactants in the equation forming magnesium oxide. |
| 77 | product | A substance formed through a chemical reaction. | Magnesium oxide is the product when magnesium reacts with oxygen under suitable conditions. |
| 78 | mole | The unit of amount of substance; one mole contains exactly 6.02214076 × 10²³ specified entities. | A mole of water molecules counts molecules, while a mole of oxygen atoms counts individual atoms. |
| 79 | molar mass | The mass per mole of a substance, often expressed in g/mol. | Using a molar mass of 18 g/mol, 9 g of water represents 0.50 mol. |
| 80 | relative atomic mass | Mean atomic mass on a scale assigning carbon-12 a value of 12; it has no unit. | A relative atomic mass of about 35.5 for chlorine does not mean every chlorine atom has 35.5 nucleons. |
The mole definition follows the BIPM definition of the International System of Units. Keep the kind of entity explicit: atoms, molecules and ions are different things to count.
Use these terms to make a distinction, not merely to name a chapter. An observation such as a gas being produced needs more evidence before the gas can be identified. The examples refer to classroom knowledge and written data, not instructions for home chemical tests.
| No. | Term | Meaning | Example or application |
|---|---|---|---|
| 81 | acid | A substance that produces hydrogen ions in aqueous solution. | Hydrochloric acid in water contains H⁺ ions; the aqueous condition matters in this school-level description. |
| 82 | base | A substance that neutralises an acid; many familiar examples are metal oxides or hydroxides. | Copper(II) oxide is a base even though it does not dissolve in water to form an alkali. |
| 83 | alkali | A water-soluble base producing hydroxide ions in aqueous solution. | Aqueous sodium hydroxide is alkaline because its solution contains OH⁻ ions. |
| 84 | pH | A numerical measure used to express how acidic or alkaline an aqueous solution is. | At ordinary classroom conditions, pH 3 indicates acidity while pH 10 indicates alkalinity. |
| 85 | neutralisation | A reaction between an acid and a base; in an acid–alkali reaction, H⁺ and OH⁻ ions combine to form water. | The ionic equation H⁺ + OH⁻ → H₂O shows what happens when these ions neutralise each other. |
| 86 | salt | An ionic compound formed when an acid’s hydrogen is replaced by metal or ammonium ions. | Sodium chloride is a salt; salts are a broad chemical category, not only substances used in cooking. |
| 87 | carbonate | A compound containing the carbonate ion, CO₃²⁻. | A carbonate reacting with a suitable dilute acid produces carbon dioxide as one of its products. |
| 88 | reactivity series | An ordering of metals by their tendency to react under comparable conditions. | Use the results of comparable reactions to place an unfamiliar metal relative to known metals. |
| 89 | corrosion | Gradual chemical deterioration of a material through reactions with its environment. | Rusting is corrosion of iron involving oxygen and water; not every corroded metal forms rust. |
| 90 | qualitative analysis | Using characteristic observations and tests to identify substances or components. | A reported positive carbon dioxide test uses limewater turning cloudy; bubbles alone do not establish identity. |
Link a substance’s structure with its behaviour. A word such as unsaturated is useful only if you can locate the relevant bond. When considering environmental claims, identify the substance, the process producing it and the particular effect being discussed.
| No. | Term | Meaning | Example or application |
|---|---|---|---|
| 91 | hydrocarbon | A compound made only from hydrogen and carbon. | Methane is a hydrocarbon; ethanol is not, because an ethanol molecule also contains oxygen. |
| 92 | alkane | A saturated, open-chain hydrocarbon with only single bonds between any carbon atoms present. | Propane, C₃H₈, is an alkane; its carbon chain contains no carbon–carbon double bond. |
| 93 | alkene | A hydrocarbon containing a carbon–carbon double bond. | Ethene, C₂H₄, has a double bond that allows it to undergo addition reactions. |
| 94 | saturated | For a hydrocarbon, having only single carbon–carbon bonds. | Ethane is saturated; drawing its bonds makes the classification more convincing than recalling its name alone. |
| 95 | unsaturated | For a hydrocarbon, containing a carbon–carbon multiple bond that can undergo addition. | Ethene is unsaturated because its two carbon atoms are joined by a double bond. |
| 96 | combustion | A reaction with oxygen that releases energy, commonly described as burning. | Complete combustion of methane produces carbon dioxide and water when enough oxygen is available. |
| 97 | cracking | Breaking larger hydrocarbon molecules into smaller molecules, including useful alkenes. | A large hydrocarbon can yield smaller molecules whose uses differ from those of the original fraction. |
| 98 | polymer | A large molecule built from many linked repeating units. | Poly(ethene) consists of long molecular chains rather than a loose mixture of unjoined ethene molecules. |
| 99 | monomer | A small molecule capable of joining with others to form a polymer. | Ethene is the monomer used to make poly(ethene) through addition polymerisation. |
| 100 | pollutant | A substance present in the environment at a level or location that causes harmful effects. | Carbon monoxide can be produced by incomplete combustion; it must not be confused with carbon dioxide. |
A Physics calculation: mass, weight and pressure
A fictional box has mass 3.0 kg and rests on a horizontal surface. Its contact area is 0.015 m². Take gravitational field strength as 10 N/kg. Find the pressure it exerts on the surface, assuming its weight provides the perpendicular contact force.
First, translate the words. The given mass is not the force needed for pressure. Calculate weight: 3.0 × 10 = 30 N. Then use pressure = force ÷ area: 30 ÷ 0.015 = 2000 Pa. The answer can be written as 2.0 × 10³ Pa to match the precision of the supplied measurements.
A student who writes 3.0 ÷ 0.015 = 200 has completed arithmetic but missed the physical quantity. The repair is to annotate the relationship with words: pressure needs force in newtons divided by area in square metres. Ask the student to explain why the kilogram cannot simply be treated as a newton.
Now change the situation. The same box rests on a smaller face of area 0.010 m². Its weight remains 30 N, while its pressure becomes 3000 Pa. The useful explanation is that the same force acts over a smaller area. “The box becomes heavier” would contradict the information given.
A Chemistry explanation: what passes through the filter?
A written question describes a mixture containing sand, sodium chloride and water. It states that the salt has dissolved and the sand has not. After filtration, what does the filtrate contain? The answer is water and dissolved sodium chloride. The sand remains as residue.
A weak answer says, “The filter removes the mixture.” A better answer identifies the property: the sand is insoluble, so its particles are retained by the filter; the dissolved salt remains in the solution passing through. The student must connect soluble, solution, residue and filtrate rather than memorise four isolated definitions.
If the next question asks how to recover the water, distillation is relevant because the water is vaporised and then condensed for collection. If the task asks about obtaining salt crystals, crystallisation becomes relevant. Decide what must be recovered before selecting a method. These are paper-based examples of separation reasoning, not a home laboratory activity.
A mole calculation: the unit tells you the relationship
A sample contains 5.85 g of sodium chloride. Use the supplied molar mass of 58.5 g/mol to find its amount in moles. Amount = mass ÷ molar mass, so 5.85 ÷ 58.5 = 0.100 mol. Writing the units helps: g divided by g/mol leaves mol.
A common wrong move is to multiply because both numbers look important. Ask what one mole would weigh. Since one mole weighs 58.5 g, a sample weighing one tenth as much represents one tenth of a mole. This size check supports the calculation. It also gives the learner a way to notice an answer such as 342 mol before moving on.
The 2027 K223 syllabus includes calculations connecting amount, mass and molar mass, while excluding stoichiometric reacting-mass and gas-volume calculations. Revise the stated course requirements carefully before adding harder calculations from a different course.
Heat and temperature
In everyday speech, “more heat” can mean several things. In a scientific explanation, state what is actually changing. Energy can be transferred by heating because of a temperature difference. Temperature is related to the average kinetic energy of particles; internal energy includes their random microscopic kinetic energy and the potential energy associated with their interactions. A higher thermometer reading alone does not establish which of two different samples has the greater total internal energy.
Current and potential difference
Current tells you how quickly charge passes a point. Potential difference tells you how much energy is transferred per unit charge. The units help separate them: ampere and volt. In a simple series loop, a lamp does not “use up current” so that less returns to the source. Energy is transferred in the lamp while charge continues around the circuit. Draw the circuit and explain the quantities before doing a calculation.
Atom and ion
A neutral atom has equal numbers of protons and electrons. An ion has an overall charge. When the usual chemical process forms a positive ion by electron loss, the proton number remains unchanged. Saying “the atom loses a proton” would change its element. Count protons and electrons separately, then determine the overall charge.
Dissolving and melting
When sugar dissolves in water, sugar particles become distributed among the water particles. When ice melts, solid water becomes liquid water. One process forms a solution; the other changes the state of a substance. “It disappeared” describes what a person noticed, but it does not adequately explain either process. Ask where the particles are after the change and whether another substance is involved.
Element, compound and mixture
Count types of atoms, identify which are bonded, and check whether more than one substance is present. Oxygen molecules can represent a pure element. Identical water molecules represent a pure compound. A sample containing both oxygen and water contains a mixture. More than one atom in a particle does not automatically mean more than one element.
Try these questions without the vocabulary tables. They are original practice questions, not official SEAB questions or a grade prediction. Write your first answer before checking. If you make an error, label its cause as meaning, relationship, evidence or presentation. That label helps you choose the next exercise.
- A trolley moves 24 m in 6.0 s. Calculate its average speed and include the unit.
- A student writes, “The weight of the stone is 0.20 kg.” Identify the problem and repair the sentence without inventing a force value.
- A 6.0 V supply produces 0.30 A through a resistor. Calculate the resistance.
- An atom has 12 protons and 12 electrons. It loses two electrons. State the resulting charge and whether the element changes.
- A colourless liquid leaves a solid after its solvent evaporates. Does colourless establish that the original liquid was a pure substance? Explain.
- In a written laboratory result, a gas forms bubbles. Is that sufficient evidence to identify it as carbon dioxide? State what additional observation would support that identification.
- Describe one similarity and one difference between evaporation and boiling.
- A wave has frequency 4.0 Hz and wavelength 0.50 m. Calculate its speed.
- A radioactive sample contains a large number of undecayed nuclei. What fraction is expected to remain after two half-lives?
- Explain why ethene is described as unsaturated, using its structure.
Answer checks
1. Average speed = 24 ÷ 6.0 = 4.0 m/s. The operation follows from the meaning of speed. If you wrote 144, return to “distance covered in each second” before trying another calculation.
2. Kilograms express mass, so the sentence can become “The mass of the stone is 0.20 kg.” A weight requires a force unit and a value of gravitational field strength. Do not silently replace kg with N and leave the same number.
3. Resistance = 6.0 ÷ 0.30 = 20 Ω. Write the relationship before substitution. A numerical answer without the unit does not communicate the quantity fully.
4. The ion has charge 2+, with 12 protons and 10 electrons. The element remains magnesium because its proton number remains 12. The change concerns charge, not elemental identity.
5. No. A solution can be colourless while containing dissolved material. Colour is an observation; purity concerns composition. The solid residue is consistent with a dissolved non-volatile solute in the original liquid.
6. No. Many gases can form bubbles. A result stating that the gas turns limewater cloudy would support carbon dioxide identification in this context. Use reported test observations; do not carry out chemical gas tests at home.
7. Both change liquid into gas. Evaporation occurs at the surface and can happen below the boiling point; boiling occurs throughout the liquid at its boiling point for the prevailing pressure. Comparing the same feature makes the difference clear.
8. Wave speed = frequency × wavelength = 4.0 × 0.50 = 2.0 m/s. Frequency describes cycles per second, while wavelength supplies the distance associated with one cycle.
9. The expected fraction is one quarter. One half-life leaves one half; a second leaves half of that remaining half. Radioactive decay is random, so this describes the expected behaviour of a large collection.
10. Ethene contains a carbon–carbon double bond. That structural feature explains its classification and ability to undergo addition reactions. “It is a gas” does not answer the question about saturation.
This is a suggested routine to adapt around school commitments, not an official timetable. Ten carefully chosen terms used well can be more manageable than a rushed session covering the whole list. Begin with the words that block current work, then return to them after a gap.
Week 1: make quantities and instructions clear
Use terms 1–30 to practise reading questions and setting out calculations. Each session should include one instruction, one quantity, one unit and one worked application. At the end of the week, change the numbers and context. A student who succeeds only with the copied example needs another explanation before more speed practice.
Week 2: explain Physics relationships
Use terms 31–50 with drawings, graph descriptions and circuit questions. Select a short explanation and remove a key phrase. Ask the student what information is missing and why it matters. Revisit one Week 1 calculation as well, so earlier vocabulary stays connected to active problem solving.
Week 3: make Chemistry particles visible
Use terms 51–80 with simple particle diagrams, formula reading and mass-to-mole calculations. Ask whether a diagram contains atoms, molecules or ions before asking for a longer answer. Correct one confusion at a time. An inaccurate particle model will not improve simply because the student adds more scientific words to the sentence.
Week 4: connect reactions, materials and mixed practice
Use terms 81–100, then mix Physics and Chemistry tasks. Include an unfamiliar diagram or a short data table. Finish each session with an independent answer followed by a brief correction. Keep a separate list of unresolved concepts for the teacher or tutor; do not bury them under another page of copied definitions.
A parent does not need to deliver a Science lesson every evening. Ask the child to choose one term and teach it to you in two sentences. Then ask for an example and a contrasting example. For “compound,” the student might explain water, then show why a mixture of sand and salt belongs to a different category. Use the school notes to check disputed details.
Keep the conversation focused on the work. “Which word changed your interpretation?” is more useful than “Why did you forget again?” If the child can explain the idea aloud but cannot write it, work on sentence structure and linking the cause to the result. If the spoken explanation is also unclear, revisit the concept before adding timed practice.
A three-student lesson can use a simple rotation. One student explains a term, a second supplies an example, and a third challenges a possible misuse. The tutor checks the reasoning and then gives every learner an independent question. Rotate roles so that a confident speaker does not become the permanent teacher while quieter learners only listen.
For instance, one learner might say that an ionic bond is “giving an electron.” Another draws the resulting oppositely charged ions. The third asks what holds those ions together. The discussion reaches the key idea: electron transfer forms ions, while electrostatic attraction is the bonding. An independent diagram question then reveals whether each learner can apply the distinction.
When discussing tuition, bring one recent school script and one piece of independent revision. Ask which errors concern language, which concern the scientific model, and how corrections will be checked in a new question. Confirm current class arrangements directly. The educational value lies in the quality of diagnosis and follow-through, not in a promise that a particular class size guarantees a result.
If the student is struggling, choose five terms from a recent misunderstood topic and five from the instructions or units needed to answer its questions. If the student is maintaining progress, mix familiar terms into unfamiliar situations. If the student is progressing confidently, ask for comparisons, conditions and justified explanations rather than simply adding more obscure vocabulary.
A useful end point is an accurate answer produced without the list. Keep the definition available while learning, remove it during the check, and bring it back during correction. The aim is for the student to notice when a word carries a scientific decision: which quantity to calculate, which particle to count, which process explains the observation, or which conclusion the evidence supports.
For a wider view of the combinations and syllabus structure, continue to the G2 Science syllabus guide for Punggol families. Use this vocabulary article alongside that guide, the current official syllabus and the school’s teaching materials.
Official information checked on 16 November 2026. The numbered vocabulary selection, teaching examples, diagnostic questions and revision routine are original eduKate educational material. They are not official examination questions, marking schemes or predictions.
- SEAB: 2027 SEC G2 syllabuses for school candidates — subject names, combinations and code references.
- SEAB: 2027 G2 Science K223, K224 and K225 syllabus — K223 scope, assessment context and subject requirements.
- BIPM: Resolution 1 of the 26th CGPM — the SI definition of the mole.
Other Secondary 4 G2 vocabulary lists
Continue with the list that matches another subject you take. Each guide includes meanings, original examples and practice with explanations.
