Small Group Tutorials

Here to help students catch up, keep up, and move ahead. Book a consultation here.

Top 100 Secondary 4 G2 Vocabulary List for Punggol | Mathematics Small Groups Tuition

The Top 100 Secondary 4 G2 Vocabulary List for Punggol helps students read Mathematics questions accurately, choose a suitable method and explain their working. This guide supports preparation for 2027 SEC G2 Mathematics, syllabus K210. It brings together 100 useful mathematical words and short terms, with plain meanings, original examples and practice. “Top 100” describes eduKate’s teaching selection; it is not an official SEAB vocabulary list or a ranking of examination frequency.

Start with the words that are causing mistakes in current schoolwork. A student who confuses “factorise” with “solve” needs a different correction from one who understands the instruction but makes a calculation error. Use the tables to clarify the meaning, try a question without the table, then explain why the method fits. Parents considering Secondary 4 G2 Mathematics small groups tuition in Punggol can use the same process to discuss a child’s learning needs: bring a recent piece of marked work and identify the exact sentence, symbol or step that became unclear.

  • Who this is for: students preparing for Secondary 4 G2 Mathematics and parents helping them organise revision.
  • What is included: exactly 100 numbered terms covering number, algebra, graphs, geometry, measurement, statistics and probability.
  • What the labels mean: the final ten entries carry a Section B note because their selected applications belong to underlined K210 content.
  • How to study: explain the term, use it in a calculation, check the answer and revisit it in a different question.
  • What to bring to a lesson: the school’s topic list, marked questions, corrections and the student’s explanation of the difficulty.
  • What this list cannot do: replace the full syllabus, complete mathematical practice or guarantee a particular grade.

Choose your reading route

Start with the task you need today, then return to the full guide when you are ready.

Full chapter index · Related G2 subject guide

Article contents

Chapters 1–3
Chapters 4–7
Chapters 8–11

CHAPTER 1 OF 11

eduKate Punggol Mathematics Tuition · 11-second introduction

1. Start with the right subject and year

Back to contents

This article is written for the 2027 SEC cohort. SEAB identifies K210 as G2 Mathematics and lists 4045 as its earlier reference code. The SEC begins in 2027; students reading older 2026 N(A)-Level materials should keep their examination year visible rather than assuming every cover page describes the same sitting. Check the SEAB SEC explanation and the current school-candidate syllabus listing when selecting resources.

G2 describes the level of Mathematics being taken. It does not describe every subject a student takes or define the student’s ability as a person. Under Full Subject-Based Banding, subject choices can involve different levels. MOE explains the subject-level approach in its Education Statistics Digest, secondary education overview. For revision, the useful question is therefore concrete: “What Mathematics syllabus am I preparing for, and which part of this question do I understand?”

The K210 syllabus specifies two two-hour papers, each worth 70 marks and 50% of the assessment. Approved calculators are allowed in both. Paper 2 Section B offers two questions, of which candidates answer one; underlined syllabus content is assessed there. Essential working matters. These arrangements explain why vocabulary revision should lead into written solutions, not stop at recognising definitions.

The list is a practical starting selection, not an exhaustive topic checklist. Some entries name mathematical objects, such as a coefficient. Others name an action, such as substitute, or a condition, such as at least. Their jobs differ. Learning to recognise those jobs helps a student decide whether to calculate a value, produce an expression, identify a property or explain a relationship.

Contents · Next chapter

CHAPTER 2 OF 11

2. Find the word that changes the calculation

Back to contents

Consider three instructions involving the same expression: “Expand 3(x + 4)”, “Evaluate 3(x + 4) when x = 2” and “Solve 3(x + 4) = 24”. The first asks for 3x + 12. The second asks for 18. The third asks for x = 4. A student can know multiplication and still answer the wrong question if the instruction is not understood.

Before calculating, underline the action and circle the object it acts on. In “find the mean speed”, the word mean does not authorise averaging every speed printed on the page. The context may require total distance divided by total time. In “find the minimum number of buses”, a decimal answer must be interpreted as a whole number of buses. The final line must answer the situation.

A useful correction has three parts: the original misunderstanding, the repaired meaning and a fresh example. Write “I treated area as length; area counts square units; a 3 cm by 4 cm rectangle has area 12 cm².” That records more than “careless mistake”. It also gives a parent or tutor something specific to check a few days later.

Contents · Previous chapter · Next chapter

CHAPTER 3 OF 11

3. The 100-word G2 Mathematics vocabulary list

Back to contents

Read each example as a demonstration of meaning. Cover the last column and make a different example yourself. The tables include foundational terms because Secondary 4 problems still depend on them. All numerical situations below are invented for teaching; prices, rates and journey details are not statements about current Punggol services.

Words 1–10: Numbers and their structure

These words describe what a number is and how it is built. A quick calculation is useful only after the student has identified the right relationship. In particular, a factor belongs inside a product, while a multiple is produced by multiplication.

No.TermMeaningExample or use
1IntegerA whole-number value, positive or negative, including zero.−3, 0 and 8 are integers; 2.5 is not an integer.
2Rational numberA number expressible as one integer divided by another non-zero integer.0.75 is rational because it equals 3/4.
3Prime numberAn integer greater than one with exactly two positive factors.13 is prime; 1 is not prime because it has only one positive factor.
4FactorA number that divides another integer exactly, in this number context.6 is a factor of 24 because 24 ÷ 6 = 4.
5MultipleA number obtained by multiplying a given number by an integer.24 is a multiple of 6 because 6 × 4 = 24.
6Highest common factorThe greatest positive integer that divides each of the given integers exactly.The highest common factor of 18 and 24 is 6.
7Lowest common multipleThe smallest positive integer that is a multiple of every given positive integer.The lowest common multiple of 6 and 8 is 24.
8PowerAn expression using a base and an index to describe repeated multiplication or its extensions.2³ is the third power of 2 and has value 8.
9Square rootA number whose square gives the stated number; the √ symbol denotes the non-negative root.√25 = 5, while the equation x² = 25 has solutions 5 and −5.
10Standard formFor a positive number, A × 10ⁿ where 1 ≤ A < 10 and n is an integer.48,000 = 4.8 × 10⁴; the first factor is between 1 and 10.
1–10: Number vocabulary with meanings and examples

Words 11–20: Accuracy and comparison

Accuracy words tell you how to present an answer. Comparison words tell you what is being compared. Keep the original quantity visible when working with percentages; changing the base changes the percentage even when the numerical difference stays the same.

No.TermMeaningExample or use
11Exact valueA value written without rounding or approximation.√2 is exact; 1.414 is an approximation to it.
12ApproximationA nearby value used in place of an exact value.π ≈ 3.14 uses an approximation sign because the values are not equal.
13Decimal placeA position to the right of the decimal point, used to specify accuracy.6.284 rounded to two decimal places is 6.28.
14Significant figureA digit counted from the first non-zero digit when expressing numerical precision.0.006274 rounded to three significant figures is 0.00627.
15EstimateA reasoned approximate result, often obtained using simpler nearby numbers.19.8 × 5.1 is about 20 × 5 = 100.
16RatioA comparison showing the relative amounts of two or more quantities.A red-to-blue ratio of 2:3 means two red parts for every three blue parts.
17Direct proportionA relationship in which one quantity is a constant multiple of another.If y = 4x, doubling x doubles y, and y/x = 4 whenever x ≠ 0.
18Inverse proportionA relationship in which the product of two quantities remains constant.If xy = 12, changing x from 3 to 6 changes y from 4 to 2.
19PercentageA comparison expressed per hundred of a stated base quantity.15 out of 60 is 25%, because 15 ÷ 60 × 100 = 25.
20Reverse percentageFinding an original quantity from a value after a percentage change.After a 20% reduction, $64 represents 80% of $80.
11–20: Accuracy, ratio and percentage vocabulary

Words 21–30: Rates, money and algebraic parts

A rate needs a unit, and an algebraic expression needs its parts read correctly. These examples also separate mathematical modelling from actual financial advice. Interest calculations below use stated hypothetical conditions solely to explain the vocabulary.

No.TermMeaningExample or use
21RateA comparison describing one quantity for a unit of another quantity.A printer producing 40 pages in 5 minutes has an average rate of 8 pages/min.
22Average speedTotal distance travelled divided by total time taken.A 12 km journey lasting 0.5 hours has average speed 24 km/h.
23Unit conversionExpressing the same quantity using a different measurement unit.72 km/h = 20 m/s; both describe the same speed.
24PrincipalThe original sum on which an interest calculation is based.For $500 invested initially, the principal is $500.
25Simple interestInterest calculated on the original principal for each stated period.At 2% yearly simple interest, $500 earns $10 each year.
26Compound interestInterest calculated on an amount that includes previously added interest.At 2% compounded yearly, $500 becomes $500 × 1.02² after two years.
27VariableA symbol representing a quantity whose value can vary.In C = 3n, n can represent different numbers of identical items.
28ConstantA quantity that stays fixed within the relationship or problem being considered.In y = 2x + 7, the added constant is 7.
29CoefficientThe numerical factor multiplying a variable or variable expression.The coefficient of x in −5x is −5, including its sign.
30TermA part of an expression separated by addition or subtraction at its main level.The expression 4x − 3y + 8 has three terms.
21–30: Rates and the building blocks of algebra

Words 31–40: What the algebra instruction asks you to do

Read these verbs together with the object that follows them. You can simplify an expression without finding a value of x. You can evaluate that expression once enough values are supplied. Neither action automatically asks you to solve an equation.

No.TermMeaningExample or use
31ExpressionA mathematical combination of numbers, symbols and operations representing a value.3x + 5 is an expression; it does not by itself assert an equality.
32EquationA statement that two expressions are equal.3x + 5 = 20 is true when x = 5.
33IdentityAn equality that holds for every permitted value of its variables.2(x + 3) ≡ 2x + 6 holds for every real x.
34FormulaA rule expressing a relationship between quantities.A = lw connects a rectangle’s area, length and width.
35Subject of a formulaThe variable isolated on one side of a formula.In w = A/l, w is the subject, with l ≠ 0.
36SubstituteReplace a variable or expression with a stated equal value or expression.Substituting x = −2 into 3x gives 3(−2).
37EvaluateFind a numerical value.Evaluate 2a + 7 when a = 4: the value is 15.
38SimplifyWrite an equivalent expression in a more manageable form.3x + 2x − 1 simplifies to 5x − 1.
39ExpandMultiply out brackets to write an equivalent expression.4(x − 2) expands to 4x − 8.
40FactoriseWrite an expression as a product of factors.x² + 5x + 6 factorises to (x + 2)(x + 3).
31–40: Algebraic objects and actions

Words 41–50: Equations, restrictions and patterns

A restriction can change the answer even when every calculation is correct. Compare x > 4 with x ≥ 4. The first excludes 4 and the second includes it. Always identify whether the problem allows decimals, integers or only positive whole numbers.

No.TermMeaningExample or use
41LinearDescribing a first-degree relationship with no products of variables, represented by a straight line.y = 3x − 2 is a linear relationship.
42QuadraticDescribing a polynomial whose highest variable power is two.x² − 5x + 6 is quadratic.
43SolutionA value, or set of values, that satisfies an equation or inequality.x = 3 is a solution of 2x + 1 = 7.
44RootA value that makes a polynomial equal to zero.2 and 3 are roots of x² − 5x + 6 = 0.
45Simultaneous equationsEquations that must be satisfied by the same variable values.x + y = 7 and x − y = 1 give x = 4, y = 3.
46InequalityA comparison using symbols such as <, >, ≤ or ≥.x + 2 ≤ 7 gives x ≤ 5.
47At leastGreater than or equal to the stated amount.At least 12 seats means 12 seats are enough, as are larger numbers.
48At mostLess than or equal to the stated amount.At most $20 permits a total of exactly $20.
49Strictly greater thanLarger than a value, with that boundary value excluded.x > 4 excludes x = 4; an integer solution could begin at 5.
50Nth termAn expression giving a sequence term from its position number n.For 5, 8, 11, 14, …, the nth term is 3n + 2.
41–50: Equation and condition vocabulary

Words 51–60: Reading and explaining graphs

A graph tells a relationship through position, scale and shape. Say what each axis measures before interpreting a point. A gradient means change in the vertical quantity per unit change in the horizontal quantity; its practical meaning depends on those quantities.

No.TermMeaningExample or use
51CoordinateA number in an ordered pair locating a point on a plane.The point (−2, 5) has x-coordinate −2 and y-coordinate 5.
52OriginThe point where the coordinate axes meet.The origin on the usual Cartesian plane is (0, 0).
53AxisA reference line used to measure positions or values on a graph.Check whether the horizontal axis measures minutes or hours.
54GradientThe change in y divided by the corresponding non-zero change in x for a non-vertical straight line.From (1, 2) to (4, 8), the gradient is 6/3 = 2.
55InterceptA point or coordinate where a graph meets an axis.For y = 2x + 3, the y-intercept is 3, at (0, 3).
56FunctionA relationship assigning exactly one output to each permitted input.The function y = x² gives output 9 when the input is −3.
57MaximumThe greatest value in the domain or situation being considered.The graph y = 5 − x² has maximum y-value 5.
58MinimumThe smallest value in the domain or situation being considered.The graph y = (x − 2)² + 1 has minimum y-value 1.
59SymmetryA property in which a shape or graph matches itself under a specified transformation.The graph y = x² has reflection symmetry about the y-axis.
60Tangent to a curveA straight line representing a curve’s local direction at a chosen point.Draw a tangent and calculate its gradient to estimate the curve’s gradient there.
51–60: Graph vocabulary

Words 61–70: Geometry and corresponding parts

Geometry vocabulary needs a diagram, even when the diagram is a quick sketch. Mark equal lengths, right angles and corresponding vertices. A diagram’s appearance alone is not a reason: the relevant property must follow from the information given.

No.TermMeaningExample or use
61ParallelDescribing straight lines in the same plane that never meet.Opposite sides of a rectangle are parallel.
62PerpendicularDescribing lines that meet at a right angle.A vertical line is perpendicular to a horizontal line.
63BisectorA line or ray that divides an angle or segment into two equal parts.An angle bisector divides a 70° angle into two 35° angles.
64Complementary anglesTwo angles whose measures add to 90°.32° and 58° are complementary.
65Supplementary anglesTwo angles whose measures add to 180°.112° and 68° are supplementary.
66CongruentHaving the same shape and size, allowing movement, rotation or reflection.Two triangles with matching side lengths 3, 4 and 5 are congruent.
67SimilarHaving equal corresponding angles and proportional corresponding lengths.A 3-by-4 rectangle is similar to a 6-by-8 rectangle.
68Scale factorThe multiplier connecting corresponding lengths in similar figures.A length changing from 5 cm to 15 cm has scale factor 3.
69PolygonA closed plane figure formed from straight line segments.A hexagon is a polygon with six sides.
70Regular polygonA polygon with all sides equal and all interior angles equal.A square is regular; a non-square rectangle is not regular.
61–70: Geometry vocabulary

Words 71–80: Trigonometry and measurement

Choose the reference angle before naming the opposite and adjacent sides. Choose the required measure before selecting a formula. The distance around a shape, the area it covers and the volume it holds are different questions with different units.

No.TermMeaningExample or use
71HypotenuseThe side opposite the right angle in a right-angled triangle.In a 3–4–5 right triangle, the hypotenuse has length 5.
72SineFor an acute angle in a right triangle, opposite side divided by hypotenuse.If those lengths are 3 and 5, sin θ = 3/5.
73CosineFor an acute angle in a right triangle, adjacent side divided by hypotenuse.If those lengths are 4 and 5, cos θ = 4/5.
74Tangent ratioFor an acute angle in a right triangle, opposite side divided by adjacent side.With opposite 3 and adjacent 4, tan θ = 3/4.
75PerimeterThe total distance around the boundary of a plane figure.A 3 cm by 4 cm rectangle has perimeter 14 cm.
76AreaThe amount of a plane region, measured in square units.The same rectangle has area 12 cm².
77VolumeThe amount of three-dimensional space occupied or enclosed.A 2 cm by 3 cm by 4 cm cuboid has volume 24 cm³.
78Surface areaThe total area of the relevant outer surfaces of a solid.A closed cube of side 2 cm has surface area 6 × 4 = 24 cm².
79ArcA portion of a circle’s circumference.A 90° minor arc is one quarter of the complete circumference.
80SectorA circular region bounded by two radii and their joining arc.A 90° sector has one quarter of the circle’s area.
71–80: Trigonometry and measurement vocabulary

Words 81–90: Data and simple chance

Read the question before choosing an average. Mean, median and mode answer different questions about data. Probability also needs a model: counting favourable outcomes and dividing by all outcomes works directly when the listed outcomes are equally likely.

No.TermMeaningExample or use
81FrequencyThe number of times a value or category occurs.If six students choose blue, the frequency for blue is 6.
82Class intervalA stated range used to group numerical data.The interval 10 ≤ x < 20 includes 10 and excludes 20.
83MeanThe total of the data values divided by the number of values.The mean of 2, 4 and 9 is 15 ÷ 3 = 5.
84MedianThe middle value after ordering data, or the mean of the middle pair.The median of 2, 4, 9 is 4.
85ModeA value occurring with the greatest frequency.The mode of 2, 3, 3, 7 is 3.
86SampleA selected part of a population used to collect information.Twenty surveyed pupils form a sample, not necessarily a picture of every pupil.
87OutcomeOne possible result of a chance process.Obtaining a 4 is one outcome of rolling an ordinary six-sided die.
88EventA collection of outcomes satisfying a stated condition.“An even number” on a die contains outcomes 2, 4 and 6.
89ProbabilityA number from zero to one expressing how likely an event is under a model.For a fair six-sided die, the probability of rolling 6 is 1/6.
90Equally likelyHaving the same probability within the stated chance model.The six faces of a fair die are equally likely; unequal spinner regions may not be.
81–90: Statistics and probability vocabulary

Words 91–100: Terms needing the Paper 2 Section B scope note

Scope note: these entries are associated with underlined content in the 2027 K210 syllabus, pages 10–12. Follow your teacher’s Section B preparation plan. “Chord” here supports circle properties; the definition is useful more broadly. The list does not reproduce every underlined topic.

No.TermMeaningExample or use
91RangeThe largest data value minus the smallest, describing spread.For 3, 5, 9, the range is 9 − 3 = 6.
92QuartileOne of the values used to divide ordered data into four parts.The lower quartile marks the lower quarter in a distribution.
93Interquartile rangeThe upper quartile minus the lower quartile, describing the middle half’s spread.If Q₁ = 12 and Q₃ = 20, the interquartile range is 8.
94Cumulative frequencyA running total of frequencies up to the stated value or boundary.Frequencies 3, 5 and 4 produce cumulative frequencies 3, 8 and 12.
95Standard deviationThe square root of the mean of the squared deviations from the data mean.When every value is identical, the standard deviation is zero.
96Independent eventsEvents for which knowing one occurred does not change the probability of the other.In a model of independent fair coin tosses, the first result does not change the second.
97Mutually exclusive eventsEvents that cannot both happen in the same trial.Rolling a 2 and rolling a 5 are mutually exclusive on one die roll.
98BearingAn angle measured clockwise from north, conventionally written using three digits.Due east has bearing 090°; the starting direction is north.
99RadianAn angle unit: one radian subtends an arc equal in length to the radius.A half-turn is π radians, equivalent to 180°.
100ChordA straight line segment whose two endpoints lie on a circle.A diameter is a chord that passes through the centre.
91–100: Selected Section B vocabulary

Contents · Previous chapter · Next chapter

CHAPTER 4 OF 11

4. Six distinctions that deserve a second look

Back to contents

Expression, equation and identity

An expression supplies something to work with: 2x + 6. An equation asserts an equality: 2x + 6 = 14. An identity states an equality that holds throughout its permitted domain: 2(x + 3) ≡ 2x + 6. If a student writes “x = −3” when asked to factorise 2x + 6, the problem is not simply a wrong number. The student has silently changed an expression into an equation equal to zero. Repair the instruction before practising more examples.

Factor and multiple

Use one multiplication sentence in both directions: 4 × 7 = 28. Four and seven are factors of 28; 28 is a multiple of each. Then ask a different question: “Can 28 be a factor of a larger number?” Yes, it is a factor of 56. The vocabulary describes a relationship between numbers, not a permanent category into which a number is placed.

At least and more than

“At least five” includes five. “More than five” excludes five. For an integer count, the smallest allowed values are therefore five and six respectively. For a continuous quantity, numbers such as 5.1 may also satisfy “more than five”. Do not automatically add one unless the context requires whole numbers. A number line makes the difference visible.

Percentage and percentage points

If a practice success rate rises from 40% to 50%, the change is 10 percentage points. Relative to the original 40%, the increase is 10/40 × 100% = 25%. These descriptions answer different questions. “Percentage points” is useful supporting language, even though it is not a separate numbered entry in this selection. Always name the original base when calculating a percentage increase.

Exact and approximate

When a square has area 2 cm², its side length is exactly √2 cm. Writing 1.41 cm gives an approximation. Keep extra calculator digits during a multistep calculation, and round at the requested stage. The K210 accuracy note gives the default as three significant figures for non-exact numerical answers, or one decimal place for angles in degrees, unless the question specifies otherwise.

Tangent line and tangent ratio

The same word can name different mathematical ideas. A tangent drawn to a curve helps estimate a gradient at a point. The tangent ratio in a right triangle is opposite divided by adjacent. A student seeing “tangent” should first identify the object and context. Drawing a line is not the same action as pressing the tan button on a calculator.

Contents · Previous chapter · Next chapter

CHAPTER 5 OF 11

5. Worked examples: turn the meaning into a solution

Back to contents

Example A: A discount question needs reverse percentage

A fictional shop sells a school bag for $72 after a 20% discount. Find its original price. The crucial phrase is “after a 20% discount”: $72 is the remaining 80%, not the original 100%. Let the original price be p dollars. Then 0.80p = 72, so p = 72 ÷ 0.80 = 90. The original price was $90.

Check forwards: 20% of $90 is $18, and $90 − $18 = $72. A common wrong answer is $86.40, obtained by increasing $72 by 20%. That applies the percentage to the wrong base. The correction should name the base explicitly rather than merely replace multiplication with division.

Example B: Similar lengths and similar areas

Two similar rectangular display boards have corresponding widths of 12 cm and 18 cm. The smaller board has area 80 cm². Find the larger area. The length scale factor is 18/12 = 1.5. Both dimensions grow by this factor, so area grows by 1.5² = 2.25. The larger area is 80 × 2.25 = 180 cm².

Why does multiplying by 1.5 once fail? Area comes from two lengths multiplied together. If the smaller dimensions are l and w, the larger area is (1.5l)(1.5w) = 2.25lw. This explanation connects the words similar, scale factor and area. It also gives a check: a larger figure must have a larger area, but that observation alone does not confirm the correct multiplier.

Example C: Average speed needs totals

For an invented exercise, a cyclist travels 6 km in 20 minutes and another 6 km in 30 minutes. The total distance is 12 km. The total time is 50 minutes, or 5/6 of an hour. Average speed = 12 ÷ (5/6) = 14.4 km/h.

The separate speeds are 18 km/h and 12 km/h. Their arithmetic mean is 15 km/h, which is not the journey’s average speed because the time spent at each speed differs. Ask the student to say the definition before entering any numbers. When the definition is secure, the appropriate calculation follows.

Example D: At most sets a boundary

A fictional class activity has a fixed cost of $12 plus $3 per participant. The budget is at most $60. Let n be the number of participants. The inequality is 12 + 3n ≤ 60. Subtracting 12 gives 3n ≤ 48; dividing by 3 gives n ≤ 16. The maximum number is 16 participants.

Check the boundary: 12 + 3(16) = 60, so 16 is permitted. If the instruction instead required the total to be strictly less than $60, then 16 would be excluded and the maximum whole-number count would be 15. A single phrase changes the final decision without changing the cost model.

Example E: An explanation needs the relevant comparison

Two fictional revision groups have mean completion times of 18 minutes and 22 minutes on the same exercise. It is reasonable to say the first group has the lower mean completion time. It is not yet justified to say every student in that group was faster or that its times were more consistent. The first claim concerns individual values; the second concerns spread. Neither follows from the two means alone.

This is mathematical vocabulary doing a practical job: it limits a conclusion to what the data supports. A useful answer names the measure, compares the values and explains what that comparison means in context. It also recognises information that is missing.

Contents · Previous chapter · Next chapter

CHAPTER 6 OF 11

6. A short diagnostic with explained answers

Back to contents

Attempt these without the vocabulary tables. Write a reason wherever the question asks for one. This is an informal learning check, not an examination grade or a prediction of performance. Use the errors to choose the next practice set.

  1. State whether 0.4 is rational, and explain.
  2. Find the highest common factor of 12 and 18.
  3. Factorise 5x + 15. Do not solve an equation.
  4. Evaluate 2a² − 1 when a = −3.
  5. Find the smallest integer strictly greater than 7.
  6. A price is $42 after a 30% reduction. Find the original price.
  7. Find the gradient between (2, 3) and (6, 11).
  8. Two similar figures have length scale factor 2. Find their area scale factor.
  9. Find the median of 8, 2, 5, 5 and 10.
  10. A fair six-sided die is rolled once. Find the probability of a result greater than 4.

Answers and what each one checks

  1. Yes: 0.4 = 2/5, a ratio of integers with a non-zero denominator. A decimal can be rational.
  2. 6: it divides both numbers, and no larger positive common factor does. Giving 36 would confuse HCF with LCM.
  3. 5(x + 3): this is a product equal to the original expression. “x = −3” answers a different, unstated equation.
  4. 17: 2(−3)² − 1 = 2(9) − 1. The brackets preserve the negative value being squared.
  5. 8: strictly greater excludes 7, and integer excludes numbers such as 7.1.
  6. $60: $42 is 70% of the original, so 42 ÷ 0.70 = 60.
  7. 2: the change in y is 8 and the change in x is 4, giving 8/4.
  8. 4: each of two length dimensions is multiplied by 2, so area is multiplied by 2².
  9. 5: order the values as 2, 5, 5, 8, 10 and select the middle value.
  10. 1/3: outcomes 5 and 6 are favourable among six equally likely outcomes, giving 2/6.

Sort any mistakes into three groups. “Meaning” means the term or instruction was misunderstood. “Method” means the language was understood but the mathematical procedure was missing. “Execution” means the method was suitable but a sign, unit or calculation went wrong. More definition copying will not fix every method error; more timed questions may not fix a meaning error. Choose the repair that matches the evidence.

Contents · Previous chapter · Next chapter

CHAPTER 7 OF 11

7. Build a vocabulary routine that reaches unfamiliar questions

Back to contents

Use a small notebook page with four spaces: term, meaning in your words, example and warning. For reverse percentage, the warning might be “identify what fraction of the original is given”. For median, it might be “order the data first”. The warning should describe a decision you can make, not a vague instruction to be more careful.

Then change one feature of the example. If you practised a 20% decrease, try a 20% increase. If you solved an inequality with a whole-number answer, try one whose boundary is a decimal and ask for an integer solution. If you identified a median from five values, use six values. These changes show whether the meaning survives beyond the first pattern.

A practical ten-minute session could begin with explaining three old terms, continue with two short questions and finish by writing one correction. The timing is a suggested study design, not a researched optimum or a required school routine. On a busy day, doing one complete correction can be more useful than opening a large list and abandoning it halfway.

Finish a topic by mixing it with another. A ratio question may involve a percentage. A geometry question may require an equation. A graph may involve unit conversion. The student should explain the connection in a sentence: “I converted minutes to hours because the speed is required in kilometres per hour.” That sentence makes the purpose of the calculation visible.

Contents · Previous chapter · Next chapter

CHAPTER 8 OF 11

8. A four-week revision route for Punggol families

Back to contents

The plan below is a starting arrangement. Adjust it around school assignments, CCA commitments and the topics your teacher is covering. It is not a promise that all difficulties will disappear within four weeks. A student with a large foundation gap may need a slower sequence and closer guidance.

Week 1: Recover number and instruction language

Work through words 1–30, then select the action words from 31–40. Use brief number questions to identify uncertainty about negative signs, factors, ratio, percentages and units. End the week with three questions that look different from the original examples. Keep only the errors that still need repair on the active revision page.

Week 2: Connect algebra to graphs

Revisit words 31–60 through equations, inequalities and graphs. Ask the student to translate both ways: words into symbols, and symbols into an ordinary sentence. For example, “y = 2x + 5” can be described as a starting value of 5 followed by an increase of 2 for every one-unit increase in x, when that interpretation fits the context.

Week 3: Draw, label and measure

Use words 61–80 in diagrams. Require a labelled sketch before calculating a missing side or area. Practise selecting the reference angle in a right triangle, identifying corresponding sides in similar figures and stating units in the answer. Include one composite-shape question so the student must choose a useful way to divide the shape.

Week 4: Interpret data and revisit weak areas

Use words 81–90 with short data sets and probability situations. Review the Section B terms in line with the school’s preparation plan. Complete a mixed set, then compare the errors with Week 1. Improvement should be visible in clearer decisions and fewer repeated misunderstandings, not only in how many definitions can be recited.

After this cycle, keep a small maintenance list. A word leaves that list when the student can recognise it, explain it and use it correctly in a fresh question. It can return if a later assignment exposes a gap. Revision is allowed to respond to evidence rather than follow a rigid promise to finish a fixed number of pages.

Contents · Previous chapter · Next chapter

CHAPTER 9 OF 11

9. How parents and a three-student group can help

Back to contents

A parent does not need to reteach the entire syllabus. Ask the student to identify the instruction, the required quantity and the reason for the first step. “Why did you divide by 0.8?” reveals more than “Did you get the answer?” If the explanation is unclear, ask the student to point to the sentence that supplied the information.

When an answer is wrong, avoid turning the correction into a judgement about ability. Compare the written steps with the meaning of the terms. Was a percentage applied to the wrong base? Was a perimeter treated as an area? Did “at least” become “more than”? A specific diagnosis gives the student a manageable next action.

For a Punggol household balancing school travel, activities and homework, agree on a routine that can actually be completed. Keep the materials together and decide which day is for revisiting corrections. There is no need to turn every family conversation into a mathematics test. The goal is a dependable place for clarification and practice.

A useful three-student teaching cycle

In a three-student group, one learner can explain a term, a second can build an example and a third can test it with a counterexample. For “regular polygon”, one student offers a square, another offers a rectangle, and the group checks whether all sides and all angles meet the definition. The teacher then changes the shape and asks each student to decide independently.

Rotate these roles so the quickest speaker does not answer everything. A quiet student still needs a chance to demonstrate understanding privately. Follow discussion with individual written work; a correct group explanation does not prove that each learner can apply the idea without prompting.

Useful feedback names the exact success or error: “Your equation matches the fixed charge and the cost per person” or “You found the length scale factor, but the question asks for area.” This gives the learner a reason to repeat or change a decision. Generic praise and a page of ticks provide less information about what to do next.

When discussing tuition support, ask how the teacher distinguishes language gaps from concept gaps, checks individual work and revisits corrections. Bring actual school examples. Read the existing G2 Mathematics syllabus guide for Punggol for the broader subject picture. Confirm current class arrangements directly rather than assuming a suggested lesson activity describes a particular available class.

Contents · Previous chapter · Next chapter

CHAPTER 10 OF 11

10. Questions students and parents often ask

Back to contents

Must I memorise all 100 definitions word for word?

No. Aim for accurate meaning and correct use. Some mathematical terms need precise conditions: a prime is greater than one, a rational number uses a non-zero denominator, and similarity compares corresponding parts. Your wording can vary if those conditions remain intact. Use a calculation or diagram to show that the definition means something to you.

Should I study the easiest words if I am already in Secondary 4?

Yes, when schoolwork shows a gap. An uncertain understanding of ratio can affect similarity, probability and percentage questions. Revisiting a foundation is a targeted repair, not a return to the beginning of the entire subject. Skip quickly over terms you can already apply reliably and spend more time on those that still change your answers.

Does knowing the vocabulary guarantee that I can solve the paper?

No. Vocabulary helps you interpret the task and communicate reasoning, but you also need concepts, procedures and practice. A student can define simultaneous equations yet need help choosing substitution or elimination. Use the definition as an entry point, then practise the mathematical decision and check the resulting values in both equations.

Can I ignore every Section B term?

Do not use this list to make that decision alone. Discuss the preparation plan with your Mathematics teacher, using the full K210 document. This article highlights scope so you can organise work intelligently; it does not advise abandoning a strand or predict which optional question will be easier in the examination.

What should I do first today?

Choose one recent error and identify one term connected with it. Read the matching row, explain the meaning without looking and attempt a fresh question. Then write a correction that records the decision you changed. That gives you a clear result from the session and a useful starting point for the next lesson.

Contents · Previous chapter · Next chapter

CHAPTER 11 OF 11

11. Official sources and further reading

Back to contents

Curriculum and examination references checked on 16 November 2026. The vocabulary definitions, teaching examples, diagnostic and study routine are original educational explanations. For a later examination year, check the corresponding syllabus and your school’s instructions.

Contents · Previous chapter · Continue to the subject guide

Continue with the list that matches another subject you take. Each guide includes meanings, original examples and practice with explanations.

Continue from here: Start Here · Tuition · Education · Pathways · Parenting 101 · All Site Routes

eduKate Punggol

Contact

83 Punggol Central, Singapore 828761

edu|Kate Bukit Timah

8 Fourth Avenue, Singapore 268674

By Appointment +65 8823 1234
admin@edukatesg.com

Email Us

When a child finally understands, school becomes less frightening and the future opens wider. Email us for the latest schedules and fees.

← 返回

感谢您的回复。 ✨