Singapore-Cambridge Secondary Education Certificate (SEC) Examinations preparation for Secondary 4 Design and Technology starts with the correct level: G1 K124, G2 K234 or G3 K345. D&T combines a written paper with an individual Design Project. The time available, paper marks and coursework weighting differ across levels. Confirm the entry using SEAB’s G1, G2 or G3 subject list before choosing resources.
For parents, a useful first step is to look at one piece of actual work: a sketch, a test record or a marked written answer. Ask what the student was trying to find out, what the evidence showed and what changed next. This guide explains the examination, makes common design decisions easier to understand and offers original practice exercises. It covers upper-secondary preparation needed for Secondary 4; the school’s teaching sequence and coursework instructions remain essential.
- Confirm the code: use the requirements for the child’s registered D&T level and examination year.
- Prepare both components: keep written-paper practice alongside the Design Project.
- Begin with a need: connect the user, situation and evidence before settling on a product.
- Make decisions visible: use sketches, measurements and tests to explain development.
- Protect the student’s ownership: support the routine and ask the coursework supervisor about permitted help.
- Keep practice purposeful: diagnose one difficulty, correct it and try a fresh task.
Scope and review date: Prepared for the 2027 SEC syllabuses; official information checked on 21 November 2026. Confirm your child’s examination year and subject level with the school.
The worked examples are original teaching exercises. The study routines are eduKate suggestions that you can adapt to the school’s sequence, teacher feedback and your child’s current needs.
EDUKATEPUNGGOL · SECONDARY 4 · SEC 2027
Find your next preparation step
Choose the route closest to your child’s needs, or use the complete chapter index below.
Full chapter index · Start a learning check · eduKatePunggol Parent Guide
Complete chapter index
Chapters 1–3: Understand the course
Chapters 4–6: Investigate and communicate
Chapters 7–10: Develop and test ideas
Chapters 11–12: Plan and improve the work
Chapters 13–14: Prepare and choose the next step
CHAPTER 1 OF 14 · Understand the course
1. Identify the subject level and the SEC change
Reviewed on 21 November 2026, Singapore time, for the 2027 examination. Keep the current syllabus beside the school’s assessment information. A book labelled simply “D&T” does not tell you whether its questions match your child’s course.
The SEAB SEC overview explains the common certificate beginning in 2027. It records the subjects and levels taken. This naming change is why families are seeing SEC and G1, G2 and G3 more often in examination information; it does not make the three D&T syllabuses identical.
Build a practical starting record
Write down the examination year, registered code, teacher’s contact route, school deadlines and resources already in use. Ask your child to identify which work is ordinary practice and which belongs to assessed coursework. Keep these distinct when arranging outside help.
Next, make a short record of strengths and difficulties. “Enjoys making things” is a useful starting observation, but it leaves several questions unanswered. Can the student identify a worthwhile need, explain a material choice, draw how parts fit and interpret a test? A child may be confident in one of these and uncertain in another.
For a Punggol family, planning starts with the actual school week. Note workshop sessions, travel home, CCA and commitments in other subjects. Home preparation can include reading, small drawing exercises and reviewing feedback. It should fit the school’s arrangements for handling assessed work and using equipment.
Use the level as a resource filter
Ask whether a resource explains the reasoning behind a decision or only displays an attractive finished product. A useful exercise gives the student something to attempt and a way to check the result. Start with one appropriate resource and a correction routine before buying several more.
The subject level belongs to this particular subject. If a parent remembers a Posting Group from Secondary 1 but is unsure of the current D&T entry, ask the school to confirm it. Use that answer to select the paper format and topic coverage in the next chapter.
CHAPTER 2 OF 14 · Understand the course
2. Read the papers, marks and project durations correctly
The assessment information below comes from pages 4 and 8–11 of the G1, G2 and G3 syllabuses. All written-paper questions are compulsory.
| Level | Paper 1: written | Paper 2: Design Project |
|---|---|---|
| G1 K124 | 1 hour; 50 marks; 30% | 20 weeks; 70 marks; 70% |
| G2 K234 | 1 hour 30 minutes; 60 marks; 40% | 20 weeks; 60 marks; 60% |
| G3 K345 | 2 hours; 80 marks; 40% | 22 weeks; 60 marks; 60% |
Project duration runs from the question’s release and excludes school holidays. Use the school’s confirmed dates and checkpoints; do not treat these durations as permission to choose a personal submission date.
G1 written Questions 1–3 cover Design for 18 marks; Questions 4–5 cover mechanisms and electronics for 32. G2 has Design in Question 1 for 24 marks and mechanisms/electronics in Questions 2–3 for 36. G3 has Design in Question 1 for 26 marks and structures/mechanisms/electronics in Questions 2–4 for 54.
Distinguish raw marks from weighted contribution
Here is an original hypothetical G3 calculation. A written result of 56/80 contributes 56 ÷ 80 × 40 = 28 percentage points. A project result of 42/60 contributes 42 ÷ 60 × 60 = 42 points. The combined total is 70/100. This illustrates weighting; it does not establish an examination grade boundary.
The practical planning question is where a student can improve the quality of their work. A high project weighting does not remove the written paper. Conversely, repeatedly completing written exercises will not recover a missing stage of an ongoing project.
Keep two short lists: the next project action agreed with the teacher, and the next written skill to practise. Review both each week. If one list keeps growing while the other receives all the attention, ask what is making that area harder to approach.
CHAPTER 3 OF 14 · Understand the course
3. Understand the coursework and support it appropriately
At all three levels, the project includes a Design Journal and Presentation Board. The G1, G2 and G3 specifications require A3 journal sheets securely fastened, or A3 sketch pads, with mock-ups and the prototype; any mould, jig or former is included. The board allows up to two single-sided A2 pieces.
The journal records development as it happens; the syllabuses advise against reworking design sheets. Teachers assess the project, with external moderation, and may act as advisers. Ask the coursework supervisor about permitted assistance, tools, storage and submission procedures.
Help the child keep ownership
A helpful parent question is, “Which decision do you need to discuss with your teacher?” It allows the student to identify a difficulty and seek the appropriate guidance. Producing the drawing, writing the explanation or arranging for someone else to make the assessed prototype takes that learning away from the child.
The examples in this guide are separate, fictional practice. They are not an answer to a live examination task. Use them to understand a skill, then let the student apply that skill to the authorised work independently under the school’s arrangements.
When an online image or product inspires a thought, help the child retain its source and explain what was learned from it. A picture saved without its origin becomes difficult to discuss later. Ask the supervisor how research sources, outside advice and any digital assistance should be acknowledged.
Keep practical work within the school’s arrangements
Check what may be brought home and what must remain at school. Arrange a safe place for approved materials and agree how the student will transport them. Workshop equipment, heating processes, electrical work and unfamiliar adhesives require the training, supervision and controls specified by the school.
If a component fails or a deadline looks difficult, encourage an early conversation with the teacher. Preserve the work already done and identify the specific problem. A clear account of what happened gives the supervisor something useful to respond to.
CHAPTER 4 OF 14 · Investigate and communicate
4. Find the first difficulty with a small learning check
Begin with a task small enough to finish and discuss. Choose an ordinary object, such as a stationery tray, and ask the student to explain who uses it, what it helps them do and one situation in which it works poorly. This is an original learning check, separate from assessed coursework.
Then ask for a quick sketch of a possible change, one measurement that would matter and one way to check the change. Ten thoughtful minutes can reveal whether the child is struggling with observation, explanation, drawing or testing.
| What you notice | Possible next check | Small practice task |
|---|---|---|
| A product is chosen immediately. | Can the student describe the user’s difficulty? | Write one observed problem without naming a solution. |
| A sketch looks finished but is unclear. | Can another person explain how it works? | Add a view, arrow or dimension that resolves one uncertainty. |
| A material is called “good”. | What particular demand must it meet? | Link one relevant property to a use condition. |
| A test is described as successful. | What was measured and compared? | State the criterion, result and resulting decision. |
Listen before correcting
Ask the child to talk through the attempt. Sometimes the idea is sensible but the explanation omits a step. Sometimes the drawing reveals that the mechanism cannot move as intended. These problems need different practice.
Keep the first attempt. After a correction, offer a different object or situation that needs the same skill. A student who can explain a new material choice without prompting has shown more transferable understanding than one who can repeat the corrected sentence.
Choose one repair target for the next session. “State what this dimension controls” is specific enough to act on. “Improve D&T” is too broad. If the difficulty persists, show the teacher two attempts and ask which underlying skill needs attention.
CHAPTER 5 OF 14 · Investigate and communicate
5. Turn an observation into a worthwhile design brief
Consider this original fictional practice situation: a student working at a shared table repeatedly moves loose pens away from an open workbook. The useful observation is the interruption to work. It does not yet prove that the student needs a particular tray, rack or container.
Ask what happens before and after the interruption. Where are the pens first placed? Which items are used most? Does the problem occur when the workbook is open, when someone else shares the table, or during packing? These questions can change the direction of the investigation.
Separate observation from interpretation
“Four pens rolled into the workbook area during the practice session” describes a recorded event. “The user is careless” adds an unsupported judgement about the person. A design investigation becomes more useful when it examines the interaction between the person, objects and setting.
For a practice observation, obtain permission and record only what is needed. Avoid collecting personal details simply because a research page has space for them. A modest, relevant record is easier to interpret than a large collection of unrelated photographs.
A possible practice brief is: “Develop a way for this student to keep frequently used pens accessible while preserving the working area on the shared table.” It identifies a user, purpose and context while leaving room for different ideas.
Ask a question that can change the design
“Do you like my tray?” encourages a broad approval or rejection. “Which item is difficult to reach while you are writing?” gives information that could affect position, arrangement or access. The second question has a clearer connection to the problem.
Do not force every observation to support the first idea. If the student discovers that pens only roll because the table surface is uneven, the original interpretation needs reconsideration. Revisiting a brief can show that the research has had an effect.
Parents can ask, “What did you learn that you did not know before?” The answer should identify a useful change in understanding. More research is worthwhile when it resolves a real uncertainty, rather than merely filling another sheet.
CHAPTER 6 OF 14 · Investigate and communicate
6. Write specifications that can be checked
A specification translates a broad intention into a condition that can be assessed. In our fictional stationery exercise, “small and useful” leaves too much unexplained. A measurable limit and a clear task give the student a basis for comparing ideas.
Suppose the permitted space is 180 mm by 120 mm. A proposed base of 170 mm by 110 mm fits within that space. If centred, it leaves 5 mm on each side in each direction: (180 − 170) ÷ 2 and (120 − 110) ÷ 2. These are invented dimensions for the exercise, not recommendations for a real product.
Connect every condition to a reason
The space limit comes from the assumed working area. Another condition might concern reaching the items without moving the workbook. The student should be able to explain how that condition relates to the observed difficulty and what evidence would show whether it has been met.
A specification can also identify a constraint, such as the school-approved materials or processes available for a practice task. Confirm those constraints before developing a proposal that depends on equipment the child cannot use.
Keep the meaning of the measurement clear. An outside width does not give the internal space available for objects. If two side panels are each 4 mm thick within an outside width of 170 mm, the simple internal-width model gives 170 − 8 = 162 mm, before allowing for any other construction details.
Check use, not only dimensions
A container can fit the table while still being awkward to use. Ask what happens when the user reaches for a short pencil, replaces an item or moves the workbook. A full-size paper outline may help explore space, while another model may be needed to examine access.
When a requirement changes, record why. Perhaps the initial measurement missed a raised edge on the table. Updating the limit after checking is more useful than quietly replacing the earlier number and losing the reason for the change.
At home, practise explaining one specification in three parts: the condition, the reason and the check. Keep any assessed specification and subsequent changes under the school’s coursework guidance.
CHAPTER 7 OF 14 · Develop and test ideas
7. Generate alternatives and explain a choice
For the fictional shared-table problem, alternatives could explore different arrangements: a shallow tray, separate small holders or a removable divider within an existing container. Their value depends on how they address the observed difficulty. Producing many drawings of the same arrangement in different colours adds less useful comparison.
Ask the student to change one consequential feature at a time: how items are held, how the user reaches them, how the object occupies space or how it can be moved. A quick sketch can make a difference visible before the idea becomes expensive to develop.
Use criteria with a reason
In an original practice comparison, suppose access matters most, followed by fit and ease of cleaning. A student gives these criteria weights of 3, 2 and 1, then uses a five-point rating scale where 5 is most favourable.
| Idea | Access × 3 | Fit × 2 | Cleaning × 1 | Total |
|---|---|---|---|---|
| A | 4 × 3 = 12 | 3 × 2 = 6 | 4 × 1 = 4 | 22 |
| B | 3 × 3 = 9 | 5 × 2 = 10 | 3 × 1 = 3 | 22 |
The equal totals do not settle the choice. Ask where the ratings came from. Was access tested or guessed? Does either idea fail a compulsory space limit? A weighted score can organise a discussion, but it cannot turn unsupported ratings into evidence or excuse a failed essential requirement.
Develop the promising uncertainty
Perhaps Idea A is easier to reach into, while Idea B leaves more room for the workbook. A useful next step is to investigate whether A can occupy less space without losing access. This is a specific development question.
Parents can encourage comparison by asking, “What would make you choose the other idea?” If no possible evidence could change the answer, the student may already be defending a favourite. A thoughtful decision remains open to a result that challenges it.
CHAPTER 8 OF 14 · Develop and test ideas
8. Use drawings to resolve a design question
A useful design drawing helps the student or another reader understand something that was previously uncertain. It might clarify the available space, show a moving part or explain how components relate. The purpose of the drawing should guide the information included.
Return to the fictional stationery holder. A three-dimensional sketch can suggest its overall form. A plan view can show whether items fit beside the workbook. A side view can reveal whether a raised edge makes short items difficult to retrieve. Each view answers a different question.
Make the important detail readable
Add an arrow where movement matters. Label a material where it affects the decision. Show a dimension where fit depends on it. An annotation such as “lower this edge to improve finger access” explains a development intention more clearly than “make better”.
In an original scale exercise, the holder is 170 mm long and 110 mm wide. At a drawing scale of 1:2, those lengths occupy 85 mm and 55 mm on the page. Dimension labels still communicate the actual proposed dimensions, 170 mm and 110 mm. Mixing drawing size with object size can produce a serious misunderstanding.
Ask the student to check consistency across views. If a divider appears in one drawing, where does it appear in the others? If a part rotates, what space does it need throughout its movement? A neat final outline may conceal a missing relationship.
Practise a correction that changes understanding
Give a partner a quick practice drawing and ask them to explain how the object would be used. Where they hesitate, identify whether the drawing lacks a view, a label, a dimension or an explanation. Add only the information needed to resolve that uncertainty.
For assessed work, follow the supervisor’s directions and preserve the development record. For ordinary practice, try a second unfamiliar object after the correction. The aim is for the student to decide what needs communicating, rather than decorate every sketch in the same way.
CHAPTER 9 OF 14 · Develop and test ideas
9. Link materials and processes to the intended use
Wood, metals, plastics and workshop processes appear in the technology content of the G1, G2 and G3 syllabuses. Use the actual level’s list with school teaching. Knowing a material’s name is a starting point; a decision also needs a reason related to the particular object and user.
Suppose a practice component needs to retain its shape under a small, teacher-approved load. In a fictional comparison, equally sized specimens A and B are tested in the same arrangement. A deflects 3 mm and B deflects 1 mm. B shows 2 mm less deflection in this test. That result supports a comparison under the stated conditions; it does not establish that B is best for every purpose.
Consider the whole choice
What about mass, cost, appearance, joining and the resources available to make the component? A suitable choice may involve a trade-off. A student should explain which demand matters most and what evidence supports the decision.
Distinguish the properties being discussed. Resistance to scratching, resistance to bending and behaviour under an impact are different questions. “Strong” becomes more useful when the answer explains the type of loading or failure relevant to the design.
For an original budget exercise, assume a panel costs $4, fittings cost $1.50 and the planned finish costs $2. The stated total is $7.50. An extra component costing $2.50 raises it to $10. These are invented prices. They show why a design change should trigger a review of its other consequences.
Connect a process to its purpose
A student explaining a joint should consider what it connects, whether it must move or separate and how accurately the parts must meet. For a finish, ask what it is intended to achieve and whether it suits the chosen material and use.
Practise these explanations from school-approved examples. Leave machinery, heating, chemical products and electrical fabrication to the school’s supervised arrangements. Parents can help the student organise questions about a process without attempting to reproduce a workshop lesson at home.
CHAPTER 10 OF 14 · Develop and test ideas
10. Explain mechanisms, control systems and G3 structures
In technology revision, follow a change through the system. What is the input? What moves or responds? What reaches the user? Both a written answer and a sketch should tell the same story.
Trace a simple mechanism
Here is an original idealised gear exercise. A 20-tooth driver meshes with a 40-tooth driven gear. When the driver turns twice, 40 teeth pass the contact point, so the driven gear turns once. At a driver speed of 60 revolutions per minute, the driven speed is 30 revolutions per minute. The two meshing external gears rotate in opposite directions.
Now change the task: if the driven gear has 10 teeth, the same 20-tooth driver produces two driven revolutions per driver revolution. This checks whether the student understands the relationship rather than memorising one numerical answer. Label the driver and driven gear before calculating.
For another mechanism, ask whether motion is being transmitted, redirected or changed between rotation and straight-line movement. Explain the intended function in the product. Naming a mechanism alone does not show how it solves the stated problem.
Separate sensing from feedback
In a fictional temperature-control model, a sensor measures temperature, a controller compares it with a target, and an output device responds. If the resulting temperature is measured again and affects the next control action, the model includes feedback. A sensor by itself does not prove that every system is closed-loop.
G1 includes using simple electronic kits; G2 and G3 include adapting available kits with working knowledge of the components. Follow the G1, G2 or G3 technology requirements and the school’s approved examples. An increasingly complicated circuit is not automatically a clearer solution.
Keep the G3 structures requirement clear
G3 additionally specifies structures, including forces and ways to strengthen them. For G3 revision, practise showing where a force acts and how a proposed change affects the response. In a fictional frame comparison, a diagonal brace may be investigated to limit sideways distortion; a fair test needs comparable frames, loading and measurement.
G1 and G2 families should use their own technology coverage when choosing written exercises. Do not make G3-only revision a substitute for repairing a difficulty in the student’s actual paper.
CHAPTER 11 OF 14 · Plan and improve the work
11. Make mock-ups and tests answer a question
A model is useful when it helps the student decide something. Before making one for ordinary practice, finish this sentence: “I need to find out whether…” The answer might concern space, access, movement or the relationship between parts.
Choose a representation suited to that question. A paper outline can explore a footprint on a table. It cannot establish how a full prototype will behave under repeated loading. A simple model may answer one question well while leaving another unresolved.
Read a result against the criterion
For an original fictional test, suppose a practice holder should allow a particular user to retrieve a pen within five seconds without shifting the workbook. In three comparable trials with Version A, the times are 7, 6 and 5 seconds: the mean is 6 seconds. Version B gives 4, 5 and 3 seconds: the mean is 4 seconds.
The mean falls by 2 seconds, or one third of the original mean. All three Version B times meet the five-second criterion. However, the time result does not establish whether the workbook stayed still. That condition needs its own observation.
Ask what remained consistent: starting position, objects used, instructions and the user’s task. Consider whether practice from earlier trials may have influenced later performance. These questions qualify the conclusion without making the test worthless.
Turn evidence into a next move
A useful conclusion could be: “Version B was faster in this small practice, but we need to check whether the access change also works with the shorter pencil.” The next action follows from a specific uncertainty.
A weak conclusion would be: “Everyone will prefer Version B.” One user and a few trials cannot establish that. Keep the claim within what was actually observed.
For school work, agree test methods and safe conditions with the teacher. Do not add loads, speeds or electrical conditions simply to make a test look more dramatic. The value comes from a relevant question, a clear observation and a justified decision.
CHAPTER 12 OF 14 · Plan and improve the work
12. Keep a useful journal, plan and presentation
Think of the working record as the story of decisions. A reader should be able to follow what the student was trying to learn, what was tried, what happened and how that affected the next step. Attractive pages alone cannot supply a missing connection.
For an original practice entry, a student might record: “The first divider blocked access to the short pencil. I compared two lower positions using a card model. The second position improved access, so I will check whether it still separates the longer pens.” The entry connects a problem, an investigation and a reason for continuing.
Plan for dependencies
Some actions depend on earlier decisions. A final cutting plan, for example, depends on dimensions being resolved and the proposed process being approved. If the dimensions change, later actions may need review. Put these relationships into the practice plan rather than listing tasks as if they are independent.
Record the next practical action in concrete terms. “Develop idea” can conceal several different jobs. “Compare the two access positions and record which reaches the short pencil” is easier to begin and easier to review.
Build a small review point into the week. Ask what is complete, what evidence is still missing and which question needs the supervisor’s attention. If progress slows, identify the cause before extending the hours. The blockage may be an unresolved decision or an unavailable supervised session.
Present the proposed solution clearly
For a presentation exercise, imagine a reader seeing the proposal for the first time. Can they identify the user, intended purpose, important features and how it would be used? Use the space to communicate those relationships. Give visual information room to be understood.
Check consistency between the record and the final proposal. A feature shown as changed in the working record should not quietly return to its earlier form on the presentation drawing. Explain a later change where needed.
Parents can support a regular check-in and the safe organisation of permitted materials. Let the student explain the next action in their own words. Keep the school’s assessed-work and submission arrangements as the boundary for what happens at home.
CHAPTER 13 OF 14 · Prepare and choose the next step
13. Use four weeks to improve written answers and working habits
The following is an eduKate preparation suggestion. It is a four-week improvement cycle within the wider course, not a replacement timetable for a twenty- or twenty-two-week examination project. Align every coursework action with the teacher’s current instructions.
| Week | Written preparation | Working habit to review | Evidence to keep |
|---|---|---|---|
| 1: Diagnose | Attempt a short design explanation and one relevant technology question. | Identify the next unresolved decision. | First attempts and teacher feedback. |
| 2: Repair | Practise the specific weak step with unfamiliar examples. | Connect one observation or test to a decision. | Correction and fresh attempt. |
| 3: Connect | Combine a sketch, explanation and calculation where appropriate. | Review consistency across dimensions, plans and records. | One complete response and a focused question. |
| 4: Rehearse | Try an appropriately timed section or paper. | Check the next school deadline and practical dependency. | Accuracy, completion and independence compared with Week 1. |
Give each answer a clear job
Read the command and identify the particular object or situation in the question. If asked to explain a choice, connect a relevant feature or property to the intended function. If asked to show movement, an arrow and a clear explanation may be more useful than a long unrelated paragraph.
For timing practice, an initial plan could reserve five minutes to orient and five to check in G1; five to orient and ten to check in G2 or G3. That leaves 50, 75 and 105 minutes respectively for answering. These are practice starting points, not SEAB instructions. Adjust after observing the student’s actual performance.
Do not divide the remaining time equally simply because questions have numbers. Notice their marks and demands. Record where time was lost: reading, recalling a concept, interpreting a diagram or repeatedly rewriting an explanation.
Review the quality of the change
Compare similar tasks at the end of the cycle. Can the student explain a material choice more specifically? Are driver and driven components labelled correctly? Is a test conclusion limited to the evidence? These observations help the family decide what to practise next.
CHAPTER 14 OF 14 · Prepare and choose the next step
14. Answer parent questions and choose useful support
Is D&T mainly about making an impressive object?
Look at the reasoning as well as the outcome. Ask why the proposal suits its user, which evidence changed it and how the student knows whether it works. A complicated object can still leave its purpose unexplained. A simpler proposal can provide a useful opportunity to practise careful decisions.
Does my child need expensive equipment at home?
Start with the school’s requirements. Ask which materials are needed, what is supplied and where practical work must take place. Ordinary practice can include observing, sketching and explaining. Do not purchase equipment or outsource a component before discussing its purpose and permissibility with the supervisor.
What if my child says they cannot draw?
Identify what the drawing needs to communicate. Begin with a simple view, one useful dimension and an arrow or label. Ask another person to explain it. Correct the missing information. This makes improvement observable without expecting every student to begin with polished presentation skills.
Can a parent or tutor help with the Design Project?
Ask the coursework supervisor what support is permitted. Parents can help organise the week and encourage the child to raise difficulties promptly. A tutor should clarify the boundaries before discussing assessed work. The student must retain ownership of the investigation, decisions and work; additional help should develop a skill, not supply a completed submission.
How should we respond to a failed test?
Ask what the result revealed. Was the idea unsuitable, the test unclear or the measurement inconsistent? Preserve the observation and identify a useful next question. Do not turn an inconvenient result into a successful one by changing the record. Discuss significant project difficulties with the teacher.
When are the examination and results?
The SEAB SEC overview places other-subject written examinations in October–November and results in January of the following year. The first SEC cohort therefore receives results in January 2028. Use the detailed timetable and school notices for the D&T paper and coursework dates.
Does taking D&T guarantee a particular future course?
No single subject establishes admission. MOE’s Post-Secondary Admissions Exercise begins in 2028 for JC, Millennia Institute, polytechnic and ITE admissions. Discuss current course requirements, the complete subject profile and the child’s interests with the school. Interest in design is useful information about possible directions, not an admission guarantee.
What is the most useful action this week?
Confirm the level and deadlines, choose one piece of marked work, and agree one small practice that addresses its feedback. Ask the student what they will do and how they will know whether it helped. For wider family planning, continue with the eduKatePunggol Parent Guide.
Official sources and further reading
Use the syllabus for your child’s examination year. The official documents contain the full requirements; the examples and preparation routines in this guide are independently written teaching material.
- SEAB: 2027 G1 Design and Technology, K124
- SEAB: 2027 G2 Design and Technology, K234
- SEAB: 2027 G3 Design and Technology, K345
- SEAB: 2027 G1 syllabuses for school candidates
- SEAB: 2027 G2 syllabuses for school candidates
- SEAB: 2027 G3 syllabuses for school candidates
- SEAB: Secondary Education Certificate overview
- MOE: 2026 announcements, including the Post-Secondary Admissions Exercise from 2028

