Small Group Tutorials

Here to help students catch up, keep up, and move ahead. Book a consultation here.

Top 100 Secondary 3 G3 Vocabulary List for Punggol | Physics Small Groups Tuition

Three students in school uniforms work through open books at a classroom table, with textbooks and stationery nearby and study notes on the whiteboard behind them.

Secondary 3 G3 Physics vocabulary helps students turn a question into a clear diagram, a suitable relationship and an explanation that makes sense. This Top 100 Secondary 3 G3 Vocabulary List for Punggol introduces useful words and short technical phrases for measurement, motion, forces, energy, thermal physics, waves, light and practical work. Each entry includes a meaning and an example, so students can practise using the language instead of only recognising it.

Use the list beside the school’s current topic and marked work. Start with ten relevant terms, explain each in ordinary English, then use it in a calculation or a short scientific explanation. Parents considering Physics small groups tuition can use the same process to identify what needs attention: the meaning of a word, the physical idea, the mathematics, or the way an answer is written. This is an educator-curated learning list, not an official SEAB Top 100 list or a prediction of examination questions.

  • For Secondary 3 students studying G3 Physics and parents supporting their first upper-secondary year.
  • Exactly 100 numbered terms, arranged in ten groups with meanings and examples.
  • Start with the topics your school has taught; treat unfamiliar later topics as previews.
  • Practise distinctions such as speed and velocity, mass and weight, temperature and internal energy, and energy and power.
  • Includes worked answers, practical reasoning, a short diagnostic and a four-week routine.
  • The syllabus reference checked on 16 November 2026 is 2027 SEC G3 Physics K323; confirm the examination-year syllabus for your own cohort.

CHAPTER 1 OF 16

eduKate Punggol Science Tuition · 11-second introduction

Choose the right Physics list for your child

Back to contents

The SEAB 2027 G3 syllabus directory lists the separate Physics subject as K323, with 6091 shown as its earlier reference code. Science (Physics, Chemistry), K326, and Science (Physics, Biology), K327, are different subjects. Many basic words overlap, but their full content and assessment requirements should be checked against the student’s actual subject. A familiar textbook label is not enough to confirm the correct course.

For a student progressing normally from Secondary 3 in 2026 to Secondary 4 in 2027, the examination-year reference is 2027. A student entering Secondary 3 in 2027 would normally reach Secondary 4 in 2028. This article uses the published 2027 document checked on 16 November 2026; families in later cohorts should confirm the corresponding examination-year document with the school when available.

The K323 syllabus describes the whole course, including practical skills. This list selects useful foundations for a Secondary 3 learner; it is not the complete course glossary or a national term-by-term teaching schedule. Mark unfamiliar wave, light or thermal topics as previews until the school reaches them. Electricity, magnetism and radioactivity need their own further study. Finishing these 100 entries does not mean finishing Physics.

In a vocabulary notebook, give each term three spaces: meaning, representation and use. For pressure, the representation might be p = F/A and a drawing of a force acting perpendicular to a surface. The use might explain why the same force produces greater pressure over a smaller area. This connects language to a physical relationship before a long calculation is attempted.

Contents · Next chapter

CHAPTER 2 OF 16

1–10: Quantities and measurement

Back to contents

No.TermMeaningExample or use
1Physical quantityA measurable property described using a numerical value and a unit.Length is a physical quantity; a reading might be 0.25 m.
2SI unitA unit belonging to the International System of Units.Express mass in kilograms when using F = ma with standard SI units.
3MagnitudeThe size of a quantity, without specifying its direction.A force of 6 N west has magnitude 6 N.
4ScalarA quantity described by magnitude alone.A distance of 40 m does not tell us a direction.
5VectorA quantity requiring magnitude and direction.A displacement of 40 m east includes both parts of the description.
6AccuracyHow close a measurement is to the true or accepted value.A miscalibrated balance can produce consistent readings that are inaccurate.
7PrecisionHow closely repeated measurements agree under the same conditions.Readings of 12.1, 12.1 and 12.2 s show a small spread.
8Zero errorAn instrument reading different from zero when the correct reading should be zero.Check a spring balance before attaching the load; its pointer should indicate zero.
9Parallax errorA reading error caused by viewing a scale from an unsuitable angle.Place your eye directly opposite a pointer when reading its scale.
10Significant figuresThe meaningful digits retained when a measured or calculated value is reported.The value 0.0460 m has three significant figures; the final zero matters.
1–10: Quantities and measurement — eduKate teaching selection.

Contents · Previous chapter · Next chapter

CHAPTER 3 OF 16

11–20: Motion and graphs

Back to contents

No.TermMeaningExample or use
11DistanceThe total length of the route travelled.Walking 30 m out and 30 m back gives a distance of 60 m.
12DisplacementThe change from initial to final position, including direction.Returning to the starting point gives zero displacement, even after a long walk.
13SpeedThe rate at which distance is travelled.A cyclist travelling 12 m each second has a speed of 12 m/s.
14VelocityThe rate of change of displacement, with direction included.A velocity of 12 m/s east differs from 12 m/s west.
15Average speedTotal distance travelled divided by the total time taken.A 300 m journey lasting 100 s has average speed 3 m/s.
16AccelerationThe rate of change of velocity.Increasing velocity from 2 to 8 m/s east in 3 s gives 2 m/s² east.
17DecelerationAn acceleration that acts opposite to the velocity, reducing speed.A trolley slows as friction acts against its direction of motion.
18GradientChange in the vertical-axis quantity divided by change in the horizontal-axis quantity.A velocity–time graph has a gradient measured in m/s²: an acceleration.
19Area under a graphThe product-type quantity represented by the region beneath a graph.The signed area under a velocity–time graph gives displacement over that interval.
20Terminal velocityA constant falling velocity reached when opposing forces balance.A falling object stops accelerating when upward resistance balances its weight.
11–20: Motion and graphs — eduKate teaching selection.

Contents · Previous chapter · Next chapter

CHAPTER 4 OF 16

21–30: Forces and motion

Back to contents

No.TermMeaningExample or use
21ForceA push or pull arising from an interaction between objects.The table exerts an upward force on a book resting on it.
22Resultant forceThe single force equivalent to the combined effect of all forces on an object.Opposing horizontal forces of 8 N and 3 N give a resultant of 5 N.
23MassThe amount of matter in an object; it also measures resistance to changes in motion.Moving a 2 kg object to another planet does not itself change its mass.
24WeightThe gravitational force acting on an object.Using g = 10 N/kg, a 2 kg object has weight 20 N.
25Gravitational field strengthThe gravitational force experienced per unit mass at a place.A field strength of 10 N/kg gives each kilogram a weight of 10 N.
26InertiaThe tendency to maintain rest or constant velocity unless a resultant force acts.A stationary trolley requires a resultant force to begin changing its velocity.
27FrictionA contact force that opposes relative motion or its tendency between surfaces.Friction between a shoe and the ground helps a walker push off.
28Normal contact forceThe force a surface exerts perpendicular to itself.For a horizontal table, the normal force on a resting book acts vertically upward.
29TensionA pulling force transmitted by a taut string, rope or cable.A hanging mass experiences upward tension from the string supporting it.
30EquilibriumA condition with no resultant force and no resultant turning effect.A balanced stationary beam remains at rest when both conditions are satisfied.
21–30: Forces and motion — eduKate teaching selection.

Contents · Previous chapter · Next chapter

CHAPTER 5 OF 16

31–40: Turning effects and pressure

Back to contents

No.TermMeaningExample or use
31MomentThe turning effect of a force about a pivot.A 5 N force acting with a perpendicular distance of 0.4 m produces 2 N m.
32PivotThe point or axis about which an object can turn.A door turns about its hinges when a force acts on its handle.
33Perpendicular distanceThe shortest distance from the pivot to the force’s line of action.For a moment calculation, draw a right angle to the force line.
34Principle of momentsFor rotational equilibrium, total clockwise moments equal total anticlockwise moments about a pivot.Compare force multiplied by perpendicular distance on each side of a balanced beam.
35Centre of gravityThe point through which an object’s weight may be considered to act.Draw one downward weight arrow through the centre of gravity of a simple object.
36StabilityThe tendency to remain upright or return after a small disturbance.A lower centre of gravity can help keep the weight’s line within the base.
37PressureNormal force acting per unit area.A force of 100 N spread over 0.02 m² produces a pressure of 5000 Pa.
38DensityMass per unit volume of a substance or object.A mass of 240 g occupying 80 cm³ has density 3 g/cm³.
39Hydraulic systemA system that transmits pressure through an enclosed liquid.In an ideal system, a larger piston area produces greater force at the same pressure.
40Atmospheric pressurePressure exerted by the surrounding air.Air particles striking surfaces produce forces distributed over those surfaces.
31–40: Turning effects and pressure — eduKate teaching selection.

Contents · Previous chapter · Next chapter

CHAPTER 6 OF 16

41–50: Energy, work and power

Back to contents

No.TermMeaningExample or use
41Energy storeA way of describing energy associated with a system’s condition.A raised object has a gravitational potential energy store relative to a chosen level.
42Energy transferMovement of energy between stores or systems through a process.A falling object transfers energy from a gravitational store to a kinetic store.
43Kinetic energyEnergy associated with motion.At unchanged mass, doubling speed makes kinetic energy four times as large.
44Gravitational potential energyEnergy associated with position in a gravitational field.Near Earth, raising a mass through height h increases this store by mgh.
45Chemical potential energyEnergy associated with the chemical arrangement of a system.A battery can supply energy to a circuit as chemical changes occur within it.
46Elastic potential energyEnergy stored when an elastic object is stretched or compressed.Compressing a spring stores energy that can later move a small trolley.
47Work doneEnergy transferred by a force acting through a displacement.A constant 6 N force acting along a 2 m displacement does 12 J of work.
48PowerThe rate of energy transfer or the rate of doing work.Transferring 600 J in 3 s corresponds to an average power of 200 W.
49EfficiencyThe fraction of input energy or power transferred usefully.A device delivering 30 J usefully from 50 J input has efficiency 60%.
50Conservation of energyEnergy cannot be created or destroyed; the total in an isolated system stays constant.Account for heating and sound when a moving trolley eventually stops.
41–50: Energy, work and power — eduKate teaching selection.

Contents · Previous chapter · Next chapter

CHAPTER 7 OF 16

51–60: Particles and thermal processes

Back to contents

No.TermMeaningExample or use
51Kinetic particle modelA description of matter using particles, their motion, spacing and interactions.Explain a gas using widely separated particles moving randomly, not expanding particles.
52Brownian motionThe irregular motion of suspended particles caused by uneven molecular collisions.Jittering smoke particles provide evidence of the unseen motion of air molecules.
53Internal energyThe total microscopic kinetic and potential energies of a system’s particles.Heating can increase internal energy even during a change of state at constant temperature.
54TemperatureA measure related to the average random kinetic energy of particles.Two samples can share a temperature while containing different total internal energies.
55Thermal equilibriumA condition in which bodies have equal temperature and no net energy transfer by heating.A thermometer settles after reaching thermal equilibrium with the liquid being measured.
56ConductionEnergy transfer through interactions within matter without bulk movement of the material.A metal spoon’s handle warms through particle interactions and mobile electrons.
57ConvectionEnergy transfer through the bulk movement of a liquid or gas.Warmer, less dense fluid can rise while cooler, denser fluid moves downward.
58RadiationEnergy transfer by electromagnetic waves, without requiring a material medium.Energy from the Sun travels through space before reaching a surface.
59Thermal conductorA material through which energy transfers readily by conduction.A metal pan base conducts energy from a hot surface towards its contents.
60Thermal insulatorA material that reduces the rate of energy transfer by conduction.A suitable handle material slows energy transfer towards the hand holding it.
51–60: Particles and thermal processes — eduKate teaching selection.

Contents · Previous chapter · Next chapter

CHAPTER 8 OF 16

61–70: Temperature changes and changes of state

Back to contents

No.TermMeaningExample or use
61Specific heat capacityEnergy needed to raise the temperature of unit mass by one degree.Use E = mcΔT when temperature changes without a change of state.
62Heat capacityEnergy needed to raise the temperature of a whole object by one degree.Two identical blocks together have twice the heat capacity of one block.
63Specific latent heatEnergy transferred per unit mass during a state change at constant temperature.Use E = ml for a completed state change when the relevant value of l is given.
64Latent heat of fusionEnergy transferred during melting or solidification at the phase-change temperature.Melting ice requires energy even while its temperature remains at the melting point.
65Latent heat of vaporisationEnergy transferred during vaporisation or condensation at the phase-change temperature.Condensing steam releases energy as it becomes liquid water at the same temperature.
66MeltingThe change from solid to liquid.During melting at fixed pressure, a pure substance changes state without rising in temperature.
67BoilingVaporisation throughout a liquid at its boiling temperature for the prevailing pressure.Bubbles of the substance’s vapour form within the boiling liquid.
68EvaporationThe escape of particles from a liquid’s surface into the gas phase.Water can evaporate from a damp cloth below its boiling temperature.
69SolidificationThe change from liquid to solid.Water releases energy to its surroundings as it freezes under suitable conditions.
70CondensationThe change from gas to liquid.Water vapour becomes droplets on a sufficiently cold surface; the droplets are liquid.
61–70: Temperature changes and changes of state — eduKate teaching selection.

Contents · Previous chapter · Next chapter

CHAPTER 9 OF 16

71–80: The language of waves

Back to contents

No.TermMeaningExample or use
71WaveA disturbance that transfers energy without an overall transfer of matter.A floating marker can move up and down as a ripple travels past it.
72OscillationOne repeated cycle of motion about an equilibrium position.One complete back-and-forth movement of a pendulum is an oscillation.
73AmplitudeThe maximum displacement from the equilibrium position.A wave drawn with greater crest height above equilibrium has greater amplitude.
74WavelengthThe distance between consecutive points in the same phase.Measure from one crest to the next crest, rather than from crest to trough.
75FrequencyThe number of complete oscillations or cycles per second.Twenty complete vibrations each second correspond to a frequency of 20 Hz.
76PeriodThe time taken for one complete oscillation.If ten oscillations take 5 s, the period is 0.5 s.
77Transverse waveA wave with oscillations perpendicular to its direction of travel.A rope can move vertically while a disturbance travels horizontally along it.
78Longitudinal waveA wave with oscillations parallel to its direction of travel.Air particles move back and forth along the direction in which sound travels.
79WavefrontA line or surface joining points in the same phase.Successive ripple crests can represent wavefronts moving across a ripple tank.
80Wave speedThe distance a wave pattern travels per unit time.For f = 5 Hz and wavelength 0.4 m, v = fλ = 2 m/s.
71–80: The language of waves — eduKate teaching selection.

Contents · Previous chapter · Next chapter

CHAPTER 10 OF 16

81–90: Light and ray diagrams

Back to contents

No.TermMeaningExample or use
81ReflectionThe return of a wave into its original medium at a boundary.A light ray striking a plane mirror travels away on the same side.
82NormalAn imaginary line perpendicular to a surface at the point of incidence.Draw the normal before measuring angles in a reflection or refraction diagram.
83Angle of incidenceThe angle between the incident ray and the normal.A ray at 30° to the surface has incidence angle 60°.
84Angle of reflectionThe angle between the reflected ray and the normal.An incidence angle of 40° gives a reflection angle of 40°.
85RefractionThe change in wave speed on entering another medium, usually accompanied by a direction change.A ray entering glass obliquely from air bends towards the normal.
86Refractive indexThe ratio of light speed in vacuum to its speed in a medium.If light travels at two-thirds of its vacuum speed, the index is 1.5.
87Critical angleThe incidence angle in the higher-index medium that gives a refracted angle of 90°.Beyond this angle, light meeting a lower-index medium can undergo total internal reflection.
88Total internal reflectionComplete reflection at a lower-index boundary when incidence exceeds the critical angle.Check both the direction between media and the incidence angle before applying the term.
89Focal lengthFor a thin converging lens, the distance from its optical centre to its principal focus.Incident rays parallel to the principal axis converge at the principal focus after passing through the lens.
90Real imageAn image formed where light rays actually converge.A real image can be formed on a screen placed at the correct position.
81–90: Light and ray diagrams — eduKate teaching selection.

Contents · Previous chapter · Next chapter

CHAPTER 11 OF 16

91–100: Practical and explanation words

Back to contents

No.TermMeaningExample or use
91Independent variableThe quantity deliberately changed in an investigation.When testing how pendulum length affects period, change length systematically.
92Dependent variableThe quantity measured to find the effect of the change.Measure the pendulum’s period for each length being investigated.
93Control variableA quantity kept suitably constant for a fair comparison.Keep the release angle small and consistent when comparing pendulum lengths.
94HypothesisA proposed explanation or relationship that can be tested against evidence.Predict that changing length will change period, then design measurements to test it.
95ObservationA measurement or event recorded directly from an investigation.The pointer moved left is an observation; the reason for its motion is an explanation.
96InferenceA conclusion reached by reasoning from observations and relevant knowledge.Infer an interaction from a change in motion, then check alternative explanations.
97Anomalous resultA result that does not fit the pattern suggested by other measurements.Repeat the measurement and investigate the cause before deciding how to treat it.
98UncertaintyThe unavoidable limitation in how precisely a measured value is known.A stopwatch reading has limitations from the instrument and the timing method.
99DescribeState the relevant features, changes or pattern shown.Describe a graph by identifying how its variables change, using values when useful.
100ExplainGive a reasoned account connecting a physical principle to the observation.Explain cooling by linking the direction of energy transfer to the temperature difference.
91–100: Practical and explanation words — eduKate teaching selection.

Contents · Previous chapter · Next chapter

CHAPTER 12 OF 16

Turn vocabulary into a complete Physics answer

Back to contents

A journey can have distance without final displacement

Consider a hypothetical student walking along a straight path in Punggol: 120 m east, then 40 m west, taking 100 s altogether. The distance is 160 m because both parts of the route count. The displacement is 80 m east because final position is measured from initial position. Average speed is 160 ÷ 100 = 1.6 m/s. Average velocity is 80 ÷ 100 = 0.8 m/s east.

The key decision happens before division. Ask whether the question concerns the route travelled or the change in position. A learner who chooses the correct formula but uses the wrong quantity still models the wrong journey. Draw an arrow for each stage, label a positive direction and write one sentence explaining why the two numerators differ. That sentence checks understanding more reliably than copying two formulae.

A flat graph does not always mean the object has stopped

On a velocity–time graph, a horizontal line at 4 m/s means constant velocity. Its gradient is zero, so acceleration is zero; the object is still moving. Over 6 s, the area beneath this line is 4 × 6 = 24 m, giving displacement. On a displacement–time graph, a horizontal line means position does not change, so velocity is zero. Always name both axes before interpreting the shape.

A useful written answer is: “The velocity remains constant at 4 m/s because the velocity–time line is horizontal.” If asked why that motion continues in terms of forces, add the relevant principle: the resultant force is zero. Do not say “there are no forces”; opposing forces may balance. The graph provides a motion description, while the force model supplies a physical explanation.

Mass and weight lead to different answers

A hypothetical schoolbag has mass 3 kg. If the question gives gravitational field strength as 10 N/kg, its weight is 3 × 10 = 30 N. Mass is reported in kilograms; weight is a force reported in newtons. A bathroom scale may display a mass value in kilograms even though its mechanism responds to a force. Read what the question asks instead of importing everyday phrasing.

For a bag resting on a horizontal floor, a simple force diagram shows weight downward and a normal contact force upward. If these are the only vertical forces and the bag has no vertical acceleration, their magnitudes are equal. The equality follows from the stated conditions. It is not a rule that every normal force must equal weight in every situation.

Power describes how quickly energy is transferred

Two imaginary lifting devices each increase a load’s gravitational potential energy by 900 J. One takes 3 s and the other takes 6 s. Their useful average powers are 300 W and 150 W respectively. They transfer the same useful energy, but the first transfers it faster. The numbers do not establish their efficiencies because their input energies have not been supplied.

Explain this using two separate questions: “How much energy?” and “In how much time?” Then add a third question for efficiency: “What fraction of the input was useful?” These questions stop three different quantities collapsing into the everyday word “stronger”. A scientifically useful comparison names the quantity and supports it with the relevant value or relationship.

A temperature plateau can still involve energy transfer

Heat describes energy transferred because of a temperature difference; it is measured in joules. Temperature tells us something different about the particles’ average random kinetic energy. Say that an object has internal energy and that energy is transferred to it by heating. This wording avoids treating “heat” and “temperature” as interchangeable quantities.

Suppose a heating curve for a pure substance at fixed pressure becomes horizontal during melting. Its temperature stays constant while solid changes to liquid. Energy transferred during that stage increases the potential-energy part of internal energy as the particle arrangement changes. It does not increase the average random kinetic energy represented by temperature. The plateau therefore does not show that the heater has stopped supplying energy.

Use E = mcΔT for an appropriate temperature-change stage and E = ml for the state-change stage. In a multistage problem, split the process before calculating. A vocabulary annotation can be as simple as “warming: temperature changes” beside one region and “melting: state changes” beside another. That small distinction makes the choice of relationship visible.

Contents · Previous chapter · Next chapter

CHAPTER 13 OF 16

Use practical vocabulary to improve an investigation

Back to contents

Imagine a supervised school investigation of how pendulum length affects period. Length is the independent variable and period is the dependent variable. A student might keep the bob and small release angle consistent while measuring several lengths. The purpose of naming variables is to describe an investigation another person could carry out sensibly, not to decorate an answer with three labels.

Instead of timing one oscillation, time a suitable number of complete oscillations and divide by that number. For example, if 20 oscillations take 28.4 s, the calculated period is 1.42 s. This spreads the effect of starting and stopping reaction time across several cycles. Repeating and comparing readings helps identify inconsistency, although repetition alone cannot remove a consistent zero error in an instrument.

Record a table heading with both quantity and unit, such as “Length / m” and “Time for 20 oscillations / s”. Decide what counts as one complete oscillation before beginning. If one result breaks the pattern, check the count, release method, apparatus and recording. Calling it anomalous is the start of an investigation, not permission to erase an inconvenient measurement automatically.

When explaining an improvement, connect the action to the weakness it addresses. “Repeat to improve accuracy” is usually too vague. “Repeat the timing at each length, compare the values and use a justified mean to reduce the influence of random timing variation” is more informative. Equally, viewing a scale perpendicularly addresses parallax; it does not repair an incorrectly calibrated instrument.

Contents · Previous chapter · Next chapter

CHAPTER 14 OF 16

Try a short diagnostic, then check the reasoning

Back to contents

Answer these without looking back. Use words as well as numbers where the question asks for an explanation. This is a learning check, not a predicted examination paper or a score that determines a student’s ability. Leave an unfamiliar topic blank and mark it “not yet taught”; that is different from misunderstanding a topic already studied.

  1. A student walks 50 m north and returns to the starting point. State the total distance and final displacement.
  2. A trolley has constant velocity. A forward force of 7 N acts on it. What must be true of the other horizontal forces?
  3. A block has mass 0.6 kg. Using g = 10 N/kg, calculate its weight and give the unit.
  4. A force acts along a displacement of 3 m and does 24 J of work. Find the force.
  5. A device transfers 240 J in 4 s. Calculate its average power.
  6. A material is melting at constant temperature. Explain why energy can still be supplied.
  7. A ray strikes a mirror at 25° to its surface. Find the angle of reflection.
  8. In an investigation, one reading differs greatly from the others. Describe a sensible next step.

Answers and what each answer checks

1. Distance is 100 m; displacement is zero. The full route counts for distance, while final and initial positions coincide. 2. The other horizontal forces must have a combined 7 N effect backward, so the horizontal resultant is zero. Constant velocity does not require the absence of forces. 3. Weight = mg = 6 N. The kilogram value describes mass; newtons describe the gravitational force.

4. Force = work ÷ displacement = 24 ÷ 3 = 8 N, under the stated alignment. 5. Power = 240 ÷ 4 = 60 W. 6. During melting, energy changes the particle arrangement and the potential-energy part of internal energy; temperature need not rise. 7. The angle to the normal is 90° − 25° = 65°, so reflection angle is 65°. 8. Repeat or check the measurement and investigate its cause before deciding how to use it.

Sort mistakes by what would fix them. A wrong unit needs unit practice. Confusing displacement with distance needs a route diagram. A correct number with no reasoning needs sentence practice. An unexplained formula choice needs the physical model revisited. This gives a student a smaller, more useful next task than simply being told to revise the entire chapter.

Contents · Previous chapter · Next chapter

CHAPTER 15 OF 16

A four-week routine for school weeks in Punggol

Back to contents

Week one: choose and explain. Select ten terms from the school’s present topic and five older terms that still cause hesitation. Make one card per term with a meaning, symbol or diagram, and example. Cover the meaning and retrieve it aloud before checking. Ten focused minutes on a manageable set can fit a crowded day without turning vocabulary into another long assignment.

Week two: separate easily confused ideas. Practise pairs such as speed and velocity or temperature and internal energy. Write an example in which one changes while the other does not, where physically appropriate. Returning to a starting point is useful for distance and displacement. A melting plateau is useful for temperature and internal energy. Explain why the example separates the terms.

Week three: use words in questions. Attempt a small set of school-level questions already within the taught scope. Before calculating, underline the requested quantity, circle a condition and write a short plan. Afterwards, check whether the numerical answer, unit and final sentence agree. Keep one corrected example instead of collecting pages of repeated work with the same unresolved error.

Week four: transfer and review. Change the numbers, direction or diagram of an earlier question and attempt it again. Explain the method to another person without reading a model answer. Review the terms that still need prompts and retire the ones used confidently in different situations. The aim is a growing working vocabulary; the four-week schedule is a suggested routine, not a guaranteed timetable for mastery.

Contents · Previous chapter · Next chapter

CHAPTER 16 OF 16

What parents can check, and how a three-student lesson can help

Back to contents

A parent does not need to remember every Physics formula to ask useful questions. Try: “What does that word mean here?”, “What is changing?”, “Which quantity has a direction?” and “Why did you choose that relationship?” If the student can answer calmly with a diagram or example, there is something solid to build on. If they cannot, ask them to mark the precise point where the explanation becomes uncertain.

For a child rebuilding foundations, reduce the set to five current terms and one worked question. For a child keeping up, mix new terms with previous topics so understanding is checked after a delay. For a child moving ahead, change a condition and ask whether the original conclusion still holds. Moving ahead should mean making better connections, not merely accumulating more unfamiliar chapter titles.

Bring the school’s current topic, a marked question and the student’s vocabulary notebook when discussing support. Ask a tutor to show how the vocabulary difficulty connects to reasoning and written answers. A useful response might separate misunderstanding of “resultant” from difficulty adding directed forces. These require different teaching moves, even when they produce the same wrong numerical answer.

A proposed three-student lesson can begin with individual retrieval: each learner explains a term without copying a neighbour. The tutor then uses one shared situation, such as a trolley moving under opposing forces. One student draws the force diagram, another explains the motion, and a third checks units and assumptions. Rotate the roles so everyone has to reason, calculate and communicate.

Finish with an individual question that changes one condition. If the trolley is accelerating, the earlier balanced-force explanation no longer applies. Each student should identify what changed and adjust the answer independently. This provides evidence about learning that a lively group discussion alone cannot supply. The lesson outline illustrates a teaching approach; families should confirm actual subject provision, lesson arrangements and suitability directly.

Judge progress using work the student can now do: distinguishing two terms correctly, labelling a diagram, selecting a relationship with a reason, or improving a practical explanation. Vocabulary supports these actions. It earns its place in a study routine when it helps a learner understand a new question and communicate the Physics clearly.

For a wider reference across the course, continue to the G3 Physics Top 200 vocabulary guide. Use this Secondary 3 page for current-topic explanations and diagnosis, then consult the broader guide as your school introduces later topics.

Contents · Previous chapter · Sources and further reading

Sources and further reading

Official reference links checked on 16 November 2026. Match the syllabus year to the student’s examination year. The vocabulary choices, explanations, exercises and study routines on this page are eduKate teaching material.

Return to the reading routes

Continue from here: Start Here · Tuition · Education · Pathways · Parenting 101 · All Site Routes

eduKate Punggol

Contact

83 Punggol Central, Singapore 828761

edu|Kate Bukit Timah

8 Fourth Avenue, Singapore 268674

By Appointment +65 8823 1234
admin@edukatesg.com

Email Us

When a child finally understands, school becomes less frightening and the future opens wider. Email us for the latest schedules and fees.

← 返回

感谢您的回复。 ✨