This Top 100 Secondary 3 G3 Vocabulary List for Punggol helps students read Chemistry questions, understand particle explanations and write answers that say precisely what happened. The 100 entries below combine scientific terms with useful question words. Each has a plain explanation and an example, followed by worked problems, a short diagnostic and a manageable study routine. Start with the terms used in your current school chapter, then practise explaining an unfamiliar example.
For parents considering Chemistry small groups tuition, the useful question is whether a student can connect a word to a model, an observation and a reason. Knowing the spelling of “ion” is different from explaining why molten sodium chloride conducts electricity. This is an eduKate teaching selection, not an official SEAB list or a guarantee of examination coverage. It supports Secondary 3 learning within the separate G3 Chemistry course; your child’s actual subject, examination year and school teaching plan determine what to study next.
- 100 numbered entries: question language, particles, atomic structure, bonding, separation, solutions, equations, calculations, acids and scientific investigations.
- Use each term in four ways: recognise it, explain it, give an example and apply it to a question.
- The 2027 SEC separate G3 Chemistry code is K324. Combined Science has different codes and scope.
- Secondary 3 in 2026 normally progresses to Secondary 4 and the SEC in 2027; Secondary 3 in 2027 normally progresses to the 2028 examination.
- School topic order varies. Treat unfamiliar later topics as a preview until your teacher introduces them.
- Use the diagnostic and worked corrections to choose a small group of words to practise each week.
Find your next learning step
Choose the part that matches the schoolwork in front of you. Every teaching section remains open below.
Check the subject, examination year and school sequence.Learn the 100 terms
Use the meanings and examples with current schoolwork.Work through examples
Connect the words to reasoning and calculations.Check and practise
Try the questions, then review the explained answers.Plan support
Choose a routine and questions to ask a teacher or tutor.
Article contents
Start with the course
The 100 vocabulary entries
- Words 1–10: Understand what the question is asking
- Words 11–20: Name the particles and materials accurately
- Words 21–30: Read atomic structure instead of memorising pictures
- Words 31–40: Link bonding to observable properties
- Words 41–50: Explain physical changes and separation
- Words 51–60: Make solution language precise
- Words 61–70: Read reactions and equations
- Words 71–80: Give Chemistry calculations a meaning
- Words 81–90: Distinguish acids, bases and salts
- Words 91–100: Explain energy changes and investigations
Worked learning, practice and support
CHAPTER 1 OF 17
Begin with the Chemistry work in front of you
Secondary 3 Chemistry asks students to move between three views of the same event. There is the visible event, such as a solid disappearing. There is a particle explanation, such as ions becoming surrounded by water molecules. There is a symbolic representation, such as a formula or an equation. A student can be comfortable with one view and uncertain about another. Vocabulary makes the connections possible.
Take a marked school question and underline the words that control the answer. Is the difficulty understanding “aqueous”, distinguishing “describe” from “explain”, or remembering what particles can move? Those are different learning needs. A longer list of spellings will not solve all three. The right starting point is the smallest misunderstanding that prevents the student from explaining the whole example.
The SEAB 2027 G3 subject index identifies separate Chemistry as K324. Science (Physics, Chemistry) K326 and Science (Chemistry, Biology) K328 are different combined subjects. These courses share some terminology, but their requirements should not be treated as interchangeable. Check the subject name on the school materials before buying resources or selecting papers.
MOE’s Full Subject-Based Banding information distinguishes subject levels from Posting Groups. G3 describes the level of a subject; it is not a permanent label for every subject a student takes. This article therefore concerns Chemistry learning, rather than making assumptions about a student’s entire subject combination.
Source check: 16 November 2026. The K324 document used here is the 2027 examination syllabus, covering the course rather than prescribing one national Secondary 3 lesson sequence. The normal 2026 Secondary 3 cohort reaches Secondary 4 in 2027; the normal 2027 Secondary 3 cohort reaches it in 2028. For that later cohort, confirm the applicable examination-year document when available. School assessment instructions remain the guide to immediate revision.
The list deliberately concentrates on foundations and explaining them. It does not attempt to fit every topic in Chemistry into 100 entries. Organic Chemistry, electrolysis and other later work need their own study. The existing 200-term G3 Chemistry glossary gives a broader reference; this page helps you use a smaller selection in Secondary 3 lessons.
Read the command before starting the answer. A correct fact can still leave the task unfinished. These plain-language prompts help you decide what to write; the whole question and its data always matter.
| No. | Word or phrase | Meaning | Example or use |
|---|---|---|---|
| 1 | state | Give the requested fact or answer directly. | For “state the charge of an electron”, write “negative”; a paragraph about atomic history does not answer more accurately. |
| 2 | describe | Set out the relevant features, observations or changes. | Describe the visible change as “bubbles form and the solid becomes smaller” before deciding what the gas might be. |
| 3 | explain | Connect a result to the scientific reason that produces it. | Explain conduction by identifying the moving charged particles and why they are able to move in that state. |
| 4 | compare | Discuss the requested similarities or differences using both cases. | Compare a sodium atom and a sodium ion by saying which has more electrons, rather than describing only the atom. |
| 5 | deduce | Reach a conclusion by linking supplied evidence with scientific knowledge. | If a particle has 11 protons and 10 electrons, deduce a charge of +1 from the unequal charges. |
| 6 | predict | Use a pattern or model to say what is expected in a new case. | Predict a reaction trend from the data provided, and check that your claim concerns the stated conditions. |
| 7 | calculate | Use numerical information and show a suitable mathematical route. | Calculate amount in moles from mass and molar mass; write units so the meaning of each quantity stays visible. |
| 8 | suggest | Offer a scientifically reasonable idea suited to the information given. | Suggest a reason for an unusual reading by identifying a plausible cause, rather than simply writing “human error”. |
| 9 | observation | Something seen or measured, recorded without adding an unsupported explanation. | “The temperature rises from 25 °C to 31 °C” records measurements; it does not yet explain the energy transfer. |
| 10 | inference | An interpretation drawn from observations and other relevant knowledge. | “The reaction releases energy to the surroundings” interprets the temperature increase in a suitable experimental context. |
The word “particle” is a useful starting point, but an explanation often needs a more specific name. Ask whether the diagram represents atoms, molecules or ions before describing its behaviour.
| No. | Word or phrase | Meaning | Example or use |
|---|---|---|---|
| 11 | particle | A general label for a tiny constituent in the model being used. | In a diagram of oxygen gas, the particles are molecules; in sodium chloride, identify the ions instead. |
| 12 | atom | An individual unit of an element, with a nucleus and electrons. | A neutral magnesium atom contains equal numbers of protons and electrons, even though their charges are opposite. |
| 13 | element | A substance whose atoms all have the same proton number. | Oxygen remains an element when its atoms are paired into O₂ molecules; pairing does not create a new element. |
| 14 | compound | A substance containing different elements chemically combined in a definite ratio. | Water is a compound: each H₂O molecule contains hydrogen and oxygen atoms in a fixed numerical relationship. |
| 15 | mixture | Two or more substances present together without becoming one new compound. | Salt mixed with sand contains two substances that can be separated using appropriate physical methods. |
| 16 | molecule | A distinct group of atoms joined by covalent bonds. | An oxygen molecule contains two oxygen atoms; a carbon dioxide molecule contains atoms of two different elements. |
| 17 | ion | An atom or bonded group of atoms with an overall electrical charge. | Na⁺ is a positively charged ion. SO₄²⁻ is a charged group of atoms, so ions need not be single atoms. |
| 18 | cation | An ion carrying an overall positive charge. | A magnesium atom forms Mg²⁺ by losing two electrons; its nucleus does not gain two protons. |
| 19 | anion | An ion carrying an overall negative charge. | A chlorine atom forms Cl⁻ by gaining an electron, so it has one more electron than proton. |
| 20 | pure substance | A single element or compound without another substance mixed into it. | Pure sodium chloride is a compound, while salt water is a mixture even when it looks completely clear. |
Track three quantities separately: the number of protons, the number of neutrons and the number of electrons. Changing one does not automatically change the others. This separation prevents many formula and charge errors.
| No. | Word or phrase | Meaning | Example or use |
|---|---|---|---|
| 21 | proton | A positively charged particle located in an atomic nucleus. | Every carbon atom has six protons; changing the proton number would change the element. |
| 22 | neutron | An uncharged particle found in atomic nuclei. | Carbon-12 and carbon-14 differ in neutron number, while both retain the six protons that identify carbon. |
| 23 | electron | A negatively charged particle occupying the region around a nucleus. | Electrons are transferred or shared in common bonding models; they are much less massive than protons or neutrons. |
| 24 | nucleus | The small central region containing an atom’s protons and any neutrons. | Most of an atom’s mass is concentrated in its nucleus, although the atom is much larger overall. |
| 25 | proton number | The number of protons in the nucleus; also called atomic number. | Proton number 11 identifies sodium. A sodium ion still has proton number 11 after losing an electron. |
| 26 | nucleon number | The total number of protons and neutrons in a nucleus. | An atom with nucleon number 23 and proton number 11 has 12 neutrons, found by subtraction. |
| 27 | isotope | One of the forms of an element with the same proton number but different neutron numbers. | Chlorine-35 and chlorine-37 are isotopes; their different masses do not make them different elements. |
| 28 | electronic structure | The arrangement of electrons in the energy levels used by a model. | The shell description 2,8,1 accounts for all 11 electrons in a neutral sodium atom. |
| 29 | valence electron | An electron in the outermost occupied shell of an atom. | A sodium atom has one valence electron in the simple shell model; this helps explain its common ion. |
| 30 | group | A vertical column of the Periodic Table. | Elements in the same main group show related chemical behaviour; use the group numbering in your supplied table. |
A useful bonding answer identifies the structure, the relevant particles and the attraction or movement involved. Naming a bond without explaining its consequence often leaves the reasoning incomplete.
| No. | Word or phrase | Meaning | Example or use |
|---|---|---|---|
| 31 | ionic bond | The attraction holding oppositely charged ions together. | In sodium chloride, attraction acts between Na⁺ and Cl⁻ ions throughout the solid, rather than creating separate NaCl molecules. |
| 32 | covalent bond | A bond in which atoms share one or more pairs of electrons. | The atoms in an oxygen molecule share electrons; distinguish these bonds from attractions between separate molecules. |
| 33 | metallic bond | Attraction between positive metal ions and delocalised electrons in a metal. | The metallic bonding model helps explain how a metal can conduct electricity while remaining a solid. |
| 34 | giant ionic lattice | An extended, ordered arrangement of positive and negative ions. | A sodium chloride crystal contains a repeating ionic structure; its formula shows the simplest ion ratio. |
| 35 | simple molecular structure | A structure made of distinct molecules with attractions between them. | When ice melts, attractions between water molecules are overcome in part; water molecules remain chemically intact. |
| 36 | giant covalent structure | A large network of atoms joined by covalent bonds. | Diamond contains carbon atoms bonded in an extended network, so it is not made of separate small diamond molecules. |
| 37 | delocalised electron | An electron that is not confined to a particular atom or bond. | Delocalised electrons can move through a metal and carry charge when a potential difference is applied. |
| 38 | electrostatic attraction | Attraction between opposite electrical charges. | Identify both charges when explaining ionic bonding: positive metal ions attract negative non-metal ions. |
| 39 | intermolecular force | An attraction acting between molecules. | Boiling a simple molecular liquid separates its molecules; this differs from breaking the covalent bonds inside each molecule. |
| 40 | electrical conductivity | The ability of a material to allow electric charge to flow. | Molten sodium chloride conducts because ions can move; the solid lacks mobile ions under normal conditions. |
Physical changes are a useful test of particle language. Keep the identity of the substance separate from its state, its arrangement and its movement. Then explain why the chosen separation method works.
| No. | Word or phrase | Meaning | Example or use |
|---|---|---|---|
| 41 | diffusion | The net spread of particles through their random motion. | A dissolved dye gradually spreads through still water; the particles keep moving even when the colour appears uniform. |
| 42 | melting | A change from solid to liquid. | When a pure solid melts, its particles become less constrained in their positions without becoming a different element. |
| 43 | boiling | Vaporisation throughout a liquid when its vapour pressure matches external pressure. | Bubbles of the substance’s vapour form within boiling water; they are not bubbles of newly formed hydrogen and oxygen. |
| 44 | evaporation | Escape of particles from a liquid surface into the gas phase. | A wet surface can dry below water’s boiling point, because evaporation does not require the whole liquid to boil. |
| 45 | condensation | A change from gas or vapour to liquid. | Water vapour cooling on a suitable surface forms liquid droplets; its particles have not turned into another substance. |
| 46 | solubility | How much solute can dissolve in a stated amount of solvent at specified conditions. | Compare solubilities only when temperature and the amount of solvent are specified; “more soluble” needs a fair comparison. |
| 47 | filtration | Separating an insoluble solid from a fluid using a suitable filter. | Filter paper can retain sand from salt water, while the dissolved salt passes through with the water. |
| 48 | residue | Material retained by a filter in a filtration process. | In filtration of sand and salt solution, the sand is the residue; identify the actual material in your example. |
| 49 | filtrate | The fluid that passes through a filter. | The filtrate from that mixture is salt solution, not necessarily pure water or a colourless liquid. |
| 50 | crystallisation | Formation of solid crystals from a solution or another suitable starting state. | Crystals may form as a concentrated solution cools, depending on how the solute’s solubility changes with temperature. |
Clear is not the same as pure, and concentrated is not the same as strong. In a solution question, first identify the substance dissolved, the solvent and the quantity being compared.
| No. | Word or phrase | Meaning | Example or use |
|---|---|---|---|
| 51 | solute | The substance dissolved to form a solution. | In a solution made by dissolving sodium chloride in water, sodium chloride is the solute even when no crystals remain visible. |
| 52 | solvent | The substance that dissolves the solute in a solution. | Water is the solvent in aqueous copper(II) sulfate, but other solutions can use a different solvent. |
| 53 | solution | A uniform mixture in which a solute is dissolved in a solvent. | A solution can be coloured and still uniform; clear means transparent, not automatically colourless. |
| 54 | aqueous | Dissolved in water, commonly represented by the state symbol (aq). | NaCl(aq) means sodium chloride dissolved in water, whereas NaCl(l) means liquid, molten sodium chloride. |
| 55 | saturated solution | A solution containing the maximum dissolved solute at the stated conditions. | A solution saturated at one temperature may dissolve more solute after a temperature change, depending on the substance. |
| 56 | dilute | Having a relatively small quantity of solute per unit volume of solution. | Adding water to a fixed amount of dissolved solute makes its solution more dilute as the volume increases. |
| 57 | concentrated | Having a relatively large quantity of solute per unit volume of solution. | A concentrated acid is not necessarily a strong acid: concentration and extent of ionisation describe different features. |
| 58 | concentration | The quantity of a substance in a specified volume of solution. | State whether concentration is in g/dm³ or mol/dm³; the units decide which quantity belongs in the calculation. |
| 59 | soluble | Able to dissolve to a significant extent in the specified solvent and conditions. | Sodium chloride is soluble in water; the solvent matters, so avoid treating solubility as a context-free label. |
| 60 | insoluble | Dissolving only to a very small extent under the stated conditions. | An insoluble solid can remain suspended before settling; being present in water does not make it dissolved. |
A chemical equation is a relationship between substances. It must preserve atoms, and ionic equations must also preserve total charge. Read coefficients and subscripts differently before beginning calculations.
| No. | Word or phrase | Meaning | Example or use |
|---|---|---|---|
| 61 | reactant | A starting substance that undergoes change during a reaction. | In magnesium reacting with hydrochloric acid, magnesium and the acid are reactants; water used as solvent has another role. |
| 62 | product | A substance formed by a chemical reaction. | Hydrogen is a product of the magnesium–acid reaction; a gas escaping the vessel has not ceased to exist. |
| 63 | chemical formula | A symbolic description of the elements and their numerical relationship in a substance. | MgCl₂ shows two chloride ions for each magnesium ion in the simplest ratio; it does not describe a lone molecule. |
| 64 | coefficient | A multiplier placed before a formula in a chemical equation. | The 2 in 2H₂O multiplies the entire formula, representing twice as many hydrogen and oxygen atoms. |
| 65 | subscript | A small number within a formula specifying the count or ratio for a symbol or group. | The 2 in H₂O belongs to hydrogen; changing it changes the substance represented instead of merely balancing an equation. |
| 66 | state symbol | A label indicating solid, liquid, gas or aqueous state in an equation. | Use (s), (l), (g) and (aq) appropriately; “aqueous” is a solution description, not another word for molten. |
| 67 | balanced equation | An equation with the same number of atoms of each element on each side. | 2Mg + O₂ → 2MgO conserves magnesium and oxygen atoms while showing the substances before and after reaction. |
| 68 | precipitation | Formation of an insoluble solid from substances in solution. | Describe a newly formed precipitate by its observed appearance; a solid placed into a liquid was not necessarily precipitated. |
| 69 | effervescence | Visible bubbling as a gas is produced or released within a liquid. | Effervescence indicates bubbling, but that observation alone does not establish which gas is present. |
| 70 | conservation of mass | The total mass is unchanged by an ordinary chemical reaction in a closed system. | An open vessel can lose measured mass when gas escapes; the gas still contributes to the total mass of the system. |
Do not let the calculator hide the substance being counted. Write its formula beside the amount in moles, and explain why the equation ratio permits each conversion.
| No. | Word or phrase | Meaning | Example or use |
|---|---|---|---|
| 71 | mole | The unit used to count amount of substance in fixed-size collections of entities. | A mole of atoms and a mole of molecules contain the same number of entities, but not necessarily the same mass. |
| 72 | amount of substance | A quantity measured in moles, referring to specified entities. | Write “0.10 mol of Mg atoms” when that is what the calculation represents; it is different from 0.10 g. |
| 73 | molar mass | Mass per mole of a specified substance, commonly in g/mol. | Using a molar mass of 24 g/mol for magnesium, 2.4 g corresponds to 0.10 mol of magnesium. |
| 74 | relative atomic mass | The weighted mean atomic mass relative to one twelfth of a carbon-12 atom’s mass. | Its value has no unit; isotopic abundances help explain why many listed relative atomic masses are not whole numbers. |
| 75 | relative molecular mass | The sum of relative atomic masses for all atoms in one molecule. | Using H = 1 and O = 16, the relative molecular mass of water is 18, without a unit. |
| 76 | empirical formula | The simplest whole-number ratio of atoms of each element in a compound. | CH₂O is the empirical formula corresponding to C₆H₁₂O₆; it does not state the actual number of atoms in that molecule. |
| 77 | molecular formula | The actual numbers of atoms of each element in a molecule. | C₂H₆ states the atom counts in an ethane molecule; its empirical formula, CH₃, expresses only the simplest ratio. |
| 78 | reacting ratio | The relationship between amounts of substances shown by a balanced equation. | Mg + 2HCl → MgCl₂ + H₂ gives a 1:2 mole ratio of magnesium to hydrogen chloride. |
| 79 | limiting reactant | The reactant whose available amount restricts the maximum product that can form. | Compare available mole amounts with the equation ratio; the smaller mass is not automatically the limiting amount. |
| 80 | percentage yield | Actual product obtained divided by theoretical product, multiplied by 100%. | An actual yield of 3.2 g from a theoretical 4.0 g gives 80%, provided both values refer to the same product. |
Learn the relationships as well as the definitions. All alkalis are bases, while many bases are not soluble in water. A substance’s name alone may not reveal its behaviour under the stated conditions.
| No. | Word or phrase | Meaning | Example or use |
|---|---|---|---|
| 81 | acid | In the school aqueous model, a substance producing hydrogen ions when dissolved in water. | Hydrochloric acid contains H⁺ ions in aqueous solution; its concentration must still be stated separately. |
| 82 | base | A substance that accepts hydrogen ions (H⁺) and neutralises an acid. | Copper(II) oxide is a base that neutralises an acid even though it is not a water-soluble alkali. |
| 83 | alkali | A water-soluble base producing hydroxide ions in aqueous solution. | Sodium hydroxide solution is alkaline; distinguish the behaviour of its aqueous solution from the label “solid”. |
| 84 | pH | A scale used to describe acidity or alkalinity in aqueous solutions. | Under ordinary school conditions, a pH below 7 indicates acidity; comparing pH does not by itself compare acid concentrations. |
| 85 | neutralisation | Reaction in which an acid and a base react, commonly producing a salt and water. | For an aqueous strong acid and alkali, H⁺ + OH⁻ → H₂O expresses the central ionic change. |
| 86 | indicator | A substance whose observable change helps identify a chemical condition. | An acid–base indicator changes colour over a particular pH range; different indicators need not change at exactly pH 7. |
| 87 | salt | A compound formed when the hydrogen ions of an acid are replaced by metal ions or ammonium ions. | Magnesium chloride is the salt in the magnesium–hydrochloric acid example; “salt” does not mean only table salt. |
| 88 | acidic oxide | An oxide that reacts with bases to form salts. | Carbon dioxide reacts with suitable bases, illustrating acidic oxide behaviour without implying that every non-metal oxide is acidic. |
| 89 | basic oxide | An oxide that reacts with acids to form salts, usually with water. | Copper(II) oxide reacts with an acid; its basic behaviour does not require it to dissolve in water first. |
| 90 | amphoteric oxide | An oxide that can react with both acids and strong bases. | Aluminium oxide shows both types of reaction; identify the reagent and conditions before predicting its behaviour. |
These terms support explanations of reactions and the evidence used to investigate them. If your school introduces one later, keep it as a labelled preview instead of treating it as overdue learning.
| No. | Word or phrase | Meaning | Example or use |
|---|---|---|---|
| 91 | exothermic | Describing a process that transfers energy from the system to its surroundings. | A suitable reaction mixture can become warmer as released energy warms it and the surrounding apparatus. |
| 92 | endothermic | Describing a process that takes in energy from the surroundings. | A suitable mixture can cool while a process absorbs energy; state the direction of transfer in the explanation. |
| 93 | activation energy | The minimum energy needed for a successful reacting collision in the collision model. | Particles can collide without reacting when the collision does not have enough energy or a suitable arrangement. |
| 94 | catalyst | A substance that increases reaction rate and is regenerated overall. | A catalyst provides an alternative reaction pathway with lower activation energy; it is not a source of extra product atoms. |
| 95 | rate of reaction | How quickly a reactant is consumed or a product is formed. | A gas-volume change per second can measure reaction rate when that gas tracks the progress of the reaction. |
| 96 | oxidation | Loss of electrons; oxygen gain is another useful description in suitable reactions. | Mg → Mg²⁺ + 2e⁻ shows oxidation clearly because the electrons appear on the product side. |
| 97 | reduction | Gain of electrons; oxygen loss is another useful description in suitable reactions. | Cu²⁺ + 2e⁻ → Cu shows reduction because the copper ions gain electrons. |
| 98 | independent variable | The factor deliberately changed to investigate its effect. | If an investigation compares different temperatures, temperature is the independent variable; name it specifically. |
| 99 | dependent variable | The response measured to investigate the effect of a change. | The volume of gas collected in a fixed time can be the dependent variable in a suitable reaction investigation. |
| 100 | controlled variable | A relevant factor kept consistent so the comparison has a clear interpretation. | Keep the mass of a solid reactant the same when testing another factor, and explain how that supports a fair comparison. |
1. An observation becomes an explanation only when the reason is added
Consider this invented classroom question: a student adds a suitable acid to a solid carbonate and observes bubbling. “Carbon dioxide is produced” is a possible interpretation supported by chemical knowledge, but it is not the same as the direct observation. “Bubbles form” records what was seen. If a question asks for evidence identifying the gas, you must use an appropriate test result supplied or obtained in the supervised lesson.
Now suppose the question asks why the measured mass of an open vessel decreases. The explanation needs a chain: a gaseous product forms; some gas leaves the vessel; the balance therefore measures less material remaining on it. Conservation of mass still holds for the complete system including the escaped gas. Writing “mass is destroyed” contradicts the model; writing only “there are bubbles” stops before the reason.
2. Conductivity needs both a charge carrier and freedom to move
A weak answer says, “Sodium chloride conducts when melted because it has electrons.” Electrons exist in solid sodium chloride too, so this does not explain the difference. A better answer identifies ions: molten sodium chloride contains positive and negative ions that can move and carry charge. In the solid, those ions are held in fixed positions in the lattice and cannot move through it to carry current.
Notice the conditional wording. “Sodium chloride conducts” omits the state. “It conducts because it has ions” omits mobility. “Its electrons become free” imports a metallic explanation into an ionic material. After correcting the sentence, ask the student to explain a different molten ionic compound. Successful transfer shows more than recognition of a memorised sodium chloride answer.
3. A mole calculation is a translation between quantities
Use this invented question: 2.4 g of magnesium reacts completely with excess hydrochloric acid. Use 24 g/mol for magnesium. Find the amount of hydrogen formed. Begin with Mg + 2HCl → MgCl₂ + H₂. The amount of magnesium is 2.4 ÷ 24 = 0.10 mol. The equation gives one mole of hydrogen for each mole of magnesium, so the theoretical amount of hydrogen is 0.10 mol.
The phrase “excess hydrochloric acid” tells you that the available acid does not limit the reaction. The coefficient 2 belongs to HCl, not to every product. A student who answers 0.20 mol of hydrogen may understand division but misunderstand the equation. Correcting the ratio is more helpful than assigning ten unrelated mass calculations.
Change one detail to check understanding. If only 0.12 mol of HCl were available with the same magnesium amount, the equation would permit 0.06 mol of hydrogen from that acid. Some magnesium would remain. This comparison explains “limiting reactant” using the relationship between amounts, without treating the smaller number of grams as decisive.
4. Dilution changes concentration without automatically changing amount
A solution contains 0.020 mol of dissolved solute in 0.100 dm³ of solution. Its concentration is 0.020 ÷ 0.100 = 0.20 mol/dm³. In an idealised dilution where none of the solute is lost, water is added until the total solution volume is 0.200 dm³. The new concentration is 0.10 mol/dm³. The amount of solute is still 0.020 mol.
Students often say the amount “halves” because the concentration halves. Draw the same number of solute particles in a larger volume to separate the two ideas. Also read the wording carefully: adding 0.200 dm³ of water is different from making the total volume 0.200 dm³. Units and sentence structure both matter.
5. Compare isotope and ion changes
A hypothetical particle has 17 protons, 18 neutrons and 18 electrons. Its nucleon number is 35 and its charge is −1. It is a chloride ion. Another particle has 17 protons, 20 neutrons and 18 electrons: the isotope is different, but the charge is unchanged. Both particles have the same number of protons and electrons respectively.
Ask the student to explain which count controls each conclusion. Proton number identifies the element; protons plus neutrons determine nucleon number; the balance of protons and electrons determines charge. One labelled table is often more useful than three memorised definitions that the student cannot connect.
Try these questions with the list covered. Use the result to choose practice, not to label the student. A correct answer reached through a guess should still be discussed, while a sensible explanation with one slip may need only a small correction.
- A liquid is transparent and blue. Must it be pure? Explain.
- A sodium atom becomes Na⁺. Which particle count changes?
- Why can filtration separate sand from salt solution but not remove the dissolved salt?
- Explain the difference between NaCl(l) and NaCl(aq).
- Balance Mg + O₂ → MgO without changing any formula.
- A temperature increases during a suitable reaction investigation. Give the observation and a possible energy-transfer explanation separately.
- A student obtains 4.5 g of product when the theoretical yield is 5.0 g. Calculate percentage yield.
- In a reaction-rate comparison at different temperatures, name one possible measured response and one factor to control.
Check the reasoning
1. No. A transparent blue solution can contain dissolved solute. Appearance alone does not establish purity. 2. The electron count decreases by one; the proton number stays the same. 3. Sand is insoluble and retained by suitable filter paper, while dissolved salt passes through with the solution. These answers test classification and particle language.
4. NaCl(l) is molten sodium chloride; NaCl(aq) is sodium chloride dissolved in water. 5. 2Mg + O₂ → 2MgO. Changing MgO to MgO₂ would change the substance instead of balancing this reaction. 6. The measured temperature increase is the observation. In the stated suitable context, energy released by an exothermic process can warm the mixture and surroundings; the explanation must refer to transfer.
7. 4.5 ÷ 5.0 × 100% = 90%. Use values for the same product. 8. One suitable response is gas volume collected in a fixed time, where a gaseous product is appropriate. One controlled factor could be reactant mass. The proposed method must actually fit the reaction and apparatus described.
If Questions 2, 4 and 5 were difficult, begin with ions, state symbols and equation notation. If Questions 1, 3 and 6 were difficult, practise separating observation from explanation. If Questions 7 and 8 were difficult, connect vocabulary to quantities and investigation design. These are practical teaching decisions, not formal diagnostic categories.
Use this as a flexible example, not a compulsory timetable. For a Punggol student balancing school, travel and CCA, a short review with a clear finish can be easier to sustain than an ambitious nightly quota. Choose words from the current school chapter first. Ten well-used entries are more useful than 100 definitions copied without attention.
Week 1: Establish the language that keeps causing mistakes
Choose ten entries linked to two recent school questions. Read the meaning, close the page and explain it aloud in your own words. Add one example and one non-example. For “compound”, water can be an example and salt water a non-example. Reopen the list to correct missing details. Keep the correction beside the original attempt so you can see what changed.
Week 2: Connect a word to a drawing or symbol
Draw particle diagrams, annotate an equation or label an atomic structure. Say exactly what each dot, line or number means. If a sketch shows ions, mark their charges. If an equation uses a coefficient, explain what it multiplies. Return to several Week 1 words after a gap instead of replacing them completely with new material.
Week 3: Use the words in school-style explanations
Write a short answer that connects a visible property with a particle explanation. Then check the link between each sentence. Does “because” introduce a real cause? Does “therefore” follow from the previous fact? Replace vague nouns such as “stuff” or “things” with the specific substance or particle when you know it. Accuracy matters more than making the sentence sound impressive.
Week 4: Check transfer and retain a small correction record
Try a new question with different substances or numbers. If the same idea works, explain why. If it does not, identify the condition that changed. Record three columns: my original answer, the corrected idea, and a fresh example. Bring unresolved questions to the teacher or tutor. You should finish with a smaller set of known difficulties, not merely a longer notebook.
A possible daily session lasts ten to fifteen minutes: a few minutes of recall, one explanation or calculation, then one correction. The duration is a practical suggestion. Reduce the number of entries during a busy school week and keep the habit of checking meaning. Independent use is the checkpoint; speed and volume can grow later.
In a three-student group, vocabulary work can make each student’s reasoning audible. The tutor can ask one student to describe the observation, another to explain the particles, and the third to check the formula. Rotate these roles so nobody becomes permanently responsible for the easy or difficult part. Each student then writes an individual answer.
A possible 90-minute lesson begins with ten minutes of recall from previous work and fifteen minutes examining a common misconception. The next twenty minutes connect the idea to diagrams and equations. Twenty further minutes are used for individual questions, followed by fifteen minutes discussing corrections and ten minutes choosing a short home task. This is an illustrative lesson design, not a claim about a current timetable or available class.
The useful feature is what happens when answers differ. If one student says solid sodium chloride lacks electrons and another says its ions cannot move, the tutor should investigate the reasoning before showing a polished model answer. Students can compare which explanation accounts for both the solid and the molten state. This turns discussion into a check of understanding.
A student repairing foundations may need fewer terms and more drawings. A student keeping pace may need repeated practice translating school questions into precise answers. A student ready to move ahead may compare two models or test the limits of a rule. These are changing learning needs, not permanent ability labels. Grouping should make the lesson useful to all three students.
Before arranging support, ask how the tutor uses the school’s topic sequence, distinguishes separate Chemistry from combined Science, checks each student’s written explanations and reviews mistakes from earlier lessons. Ask whether practical preparation means analysing data and methods or includes supervised laboratory work; do not assume the facilities from an article title. Confirm actual arrangements directly.
You do not need to become the Chemistry teacher to support accurate vocabulary. Ask for one explanation connected to current schoolwork: “What does aqueous tell you here?” or “Why did you use that mole ratio?” Listen for a connection rather than a perfect textbook sentence. When the explanation becomes uncertain, help identify the exact question to take back to school.
Encourage honest correction. A student who says “I mixed up concentration and amount” has found something teachable. Replace broad remarks about carelessness with a concrete next step: label the amount and volume before dividing. Keep marked work long enough to see whether the same confusion returns. A more precise explanation is useful progress even before a later assessment confirms it.
If a home language helps the student understand an idea, discuss it in that language and then reconnect it to the English term used in school. Check that the translation preserves the scientific distinction. “Strong”, “concentrated”, “clear” and “pure” are particularly easy to blur in ordinary conversation. Ask for a scientific example to confirm the meaning.
Use school-approved practical activities and the teacher’s instructions. A vocabulary exercise does not require recreating laboratory reactions at home. Diagrams, supplied data, explanations and equations can reveal most of the language difficulties discussed here. Questions about unfamiliar laboratory procedures should go to the supervising teacher.
Are these the official 100 words for G3 Chemistry?
No. They are an eduKate selection intended to make a manageable learning route. SEAB publishes subject requirements, not this ranked list. The word “Top” describes the teaching selection, not a measured frequency table, an examination prediction or an official endorsement. Use the applicable syllabus and school materials to check the full requirements.
Must every Secondary 3 student learn all 100 immediately?
No. The course develops over time and schools can sequence topics differently. Mark each entry as current learning, earlier learning to revise or later preview. Concentrate on the current and earlier groups first. A student should not feel behind merely because a later topic appears in a reference article.
Can a combined Science student use the list?
Many foundational words are useful across science courses, but the list is organised around separate G3 Chemistry. A combined Science student should select only the relevant items with the correct syllabus and teacher guidance. Shared terminology does not mean identical depth, assessment arrangements or course coverage.
Will vocabulary practice improve every Chemistry answer?
It can remove a language barrier, but Chemistry also requires concepts, calculations, practical reasoning and applying ideas to new situations. If a student defines a term correctly but cannot use it, work on the missing connection. If the concept is secure but the written answer is vague, practise expressing the causal chain more precisely.
What should we do after this page?
Choose five entries that appear in current schoolwork. Use each in an explanation, diagram or calculation. Check those attempts, and bring one unresolved question to the next lesson. When that foundation is steadier, use the broader 200-term G3 Chemistry reference for additional topics. The aim is to make the next school lesson easier to understand and the next answer easier to explain.
Sources and further reading
Official reference links checked on 16 November 2026. Match the syllabus year to the student’s examination year. The vocabulary choices, explanations, exercises and study routines on this page are eduKate teaching material.
