This Top 100 Secondary 1 G2 Vocabulary List for Punggol helps students understand Science questions, explain observations and use subject terms accurately. Begin with the words in the chapter your child is learning now: understanding the difference between an observation and an inference, or between melting and dissolving, is more useful than rushing through a hundred definitions.
For parents considering Secondary 1 G2 Science small groups tuition in Punggol, the useful question is whether a lesson helps the child connect words with objects, measurements and explanations. A three-student group can give each learner time to describe what happened, defend an answer and correct a misunderstanding. This guide provides that kind of practice at home too. The list draws on lower-secondary foundations, so select terms that match the school’s current G2 lessons; it does not mean every topic below must be completed in Secondary 1.
- Who this is for: Secondary 1 students learning Science at G2 and parents supporting their transition from primary school.
- What you receive: exactly 100 selected words and terms, with meanings, examples and teaching activities.
- Where to begin: the current school topic and the words your child cannot yet explain.
- What matters: accurate understanding, relevant evidence, correct units and clear cause-and-effect explanations.
- How to practise: learn a few terms, apply them to a new example, then check independently.
- What the list represents: eduKate’s teaching selection, not an official MOE or SEAB Top 100 list.
- How to use tuition: look for individual explanations and useful correction, alongside the school’s teaching scope.
eduKate Punggol · Secondary 1 G2 · Science
Find your next learning step
Choose the part that matches today’s schoolwork. The full teaching guide stays open below.
Chapter index
Chapters 1–4
Chapters 5–8
MOE’s G2/G3 Lower Secondary Science syllabus provides the curriculum reference. It connects scientific ideas with scientific practices and responsible ways of working. Its lower-secondary coverage extends beyond a single Secondary 1 chapter. Use the school’s G2 teaching sequence and assessment instructions to decide which parts of this list belong in the present week.
The Singapore-Cambridge Secondary Education Certificate begins in 2027 for students reaching the school-leaving examinations. Secondary 1 vocabulary work builds foundations for later study; the SEC syllabus is not a Secondary 1 examination checklist. Families should check the requirements for their child’s eventual examination cohort when those become relevant.
Try a simple selection rule. Mark a word now when it appears in the current lesson, repair when it caused an error, and later when the class has not reached it. This keeps the list useful without turning it into another source of pressure. The numbers organise the resource; they are not a ranking of examination frequency.
Science answers often become clearer when a student separates what was noticed from what was concluded. “The liquid became cloudy” reports an observation. “A new insoluble substance formed” interprets what might have happened. The second statement needs appropriate evidence and knowledge of the particular experiment. A confident-sounding sentence is not automatically a supported explanation.
Words 1–10: observations, evidence and explanations
| Number | Term | Meaning | Example |
|---|---|---|---|
| 1 | Observe | Notice and record what happens, using senses or suitable instruments. | Observe whether the liquid changes colour when the teacher adds the indicator. |
| 2 | Observation | A description of something noticed or measured. | “The temperature rose from 24°C to 29°C” is an observation supported by readings. |
| 3 | Infer | Use observations and knowledge to work out a possible explanation. | Infer a possible cause of the change, then check whether the evidence supports it. |
| 4 | Inference | An interpretation drawn from evidence rather than directly observed. | “Water vapour condensed” explains droplets appearing outside a cold cup. |
| 5 | Evidence | Information used to support or question a claim. | The recorded masses provide evidence when comparing two samples of the same volume. |
| 6 | Hypothesis | A proposed explanation that can be investigated. | A student suggests that greater exposed surface area makes water evaporate faster. |
| 7 | Predict | State an expected outcome using a reason or pattern. | Predict which sample will dissolve first, and explain the condition used in your prediction. |
| 8 | Prediction | An expected result that can later be checked. | “The stirred sample will dissolve sooner” is a prediction, not a measured result. |
| 9 | Conclusion | A statement answering the investigation question using the results. | The conclusion should describe what the recorded results support, including any uncertainty. |
| 10 | Explain | Make clear how or why something happens. | Explain why a suitable filter separates sand from water by referring to particle size. |
Words 11–20: planning a useful investigation
| Number | Term | Meaning | Example |
|---|---|---|---|
| 11 | Experiment | A planned test carried out under chosen conditions. | The experiment compares dissolving times while changing only whether the water is stirred. |
| 12 | Investigation | A systematic attempt to answer a question using evidence. | An investigation may involve observations, measurements or a controlled experiment. |
| 13 | Independent variable | The factor deliberately changed in an experiment. | When testing the effect of stirring, whether the water is stirred is the independent variable. |
| 14 | Dependent variable | The outcome measured to find the effect of a change. | The time taken for a fixed amount of sugar to dissolve is the dependent variable. |
| 15 | Control variable | A relevant factor kept the same for a fair comparison. | Use the same mass of sugar and starting water temperature in each trial. |
| 16 | Fair test | A comparison that controls relevant conditions while testing a chosen factor. | Changing both stirring and water temperature would make their separate effects difficult to identify. |
| 17 | Repeat | Carry out a measurement or trial again. | Repeat the trial to check whether the result is consistent with the earlier readings. |
| 18 | Anomaly | A result that differs noticeably from the overall pattern. | Investigate an unusually long dissolving time before deciding whether it reflects a recording error. |
| 19 | Compare | Identify relevant similarities and differences. | Compare the samples using the same property, such as their mass for equal volumes. |
| 20 | Classify | Arrange things into groups using stated characteristics. | Classify the materials by whether they conduct electricity in the given test. |
Variables become easier when the student finishes three sentences: “I change…”, “I measure…”, and “I keep… the same.” Then ask whether the measurement really answers the question. If the question concerns dissolving speed, measuring the final colour does not provide the required comparison. The words matter because they organise the investigation, not because every answer needs to contain all three labels.
A measurement is a number connected to a quantity and unit. Writing “25” alone may leave the reader unable to tell whether the student means temperature, volume or time. Reading the apparatus is equally important: the smallest division must be understood before a value is recorded. Use school laboratory equipment only under the teacher’s instructions; the examples here explain language rather than authorise practical procedures.
Words 21–30: recognising apparatus and its purpose
| Number | Term | Meaning | Example |
|---|---|---|---|
| 21 | Apparatus | Equipment used for a practical task or investigation. | Choose apparatus that can measure the required quantity appropriately. |
| 22 | Beaker | A laboratory container commonly used to hold or mix liquids. | A beaker’s rough markings are less suitable for measuring a precise volume. |
| 23 | Measuring cylinder | A graduated container used to measure liquid volume. | Read the water level at eye height using the cylinder’s marked scale. |
| 24 | Thermometer | An instrument used to measure temperature. | The thermometer shows that the water is warmer than it was before heating. |
| 25 | Electronic balance | An instrument that measures mass electronically. | Account for the container’s mass when finding the mass of the sample. |
| 26 | Stopwatch | An instrument used to measure a time interval. | Start and stop the stopwatch using the same clearly defined events in every trial. |
| 27 | Ruler | A straight measuring tool with a marked length scale. | Align the object with the correct starting mark before reading its length. |
| 28 | Dropper | A tool for transferring small amounts of liquid in drops. | Follow the teacher’s directions when using a dropper to add an indicator. |
| 29 | Funnel | A tool that guides liquid into a smaller opening. | During filtration, a funnel supports the correctly fitted filter paper. |
| 30 | Filter paper | Porous paper that retains suitable insoluble particles during filtration. | Sand remains on the filter paper while water passes through. |
Words 31–40: reading and recording measurements
| Number | Term | Meaning | Example |
|---|---|---|---|
| 31 | Quantity | A property that can be measured and expressed with a value. | Length and temperature are different quantities, so they require different units. |
| 32 | Unit | An agreed reference used to express a measurement. | Record a time as 40 s, rather than leaving the unit unstated. |
| 33 | Length | The distance between two points. | The length of the pencil is measured from one end to the other. |
| 34 | Mass | A measure of the amount of matter in an object. | A sample with mass 50 g has a mass reading, not a volume reading. |
| 35 | Volume | The amount of space occupied by an object or substance. | The measuring cylinder contains 30 cm³ of water. |
| 36 | Temperature | A measure indicating how hot or cold something is. | Water at 40°C has a higher temperature than water at 20°C. |
| 37 | Time | The duration between a chosen start and finish. | Measure the time from adding the sugar until no visible crystals remain. |
| 38 | Scale | The ordered markings used to read a measuring instrument or graph. | If five equal intervals span 10 cm³, each interval represents 2 cm³. |
| 39 | Meniscus | The curved surface of a liquid in a narrow container. | For water, read the bottom of the meniscus at eye level. |
| 40 | Parallax error | A reading error caused by viewing a scale from an unsuitable angle. | Looking down from above the water level can produce a parallax error. |
Everyday speech can hide a scientific distinction. A child may say that sugar “melts” in tea or that water has “disappeared” from a puddle. Ask what actually happened to the substance. Did a solid become a liquid, did a substance dissolve in a liquid, or did liquid water become water vapour? The answer decides which term fits.
Words 41–50: describing matter
| Number | Term | Meaning | Example |
|---|---|---|---|
| 41 | Matter | Anything that has mass and occupies space. | Air is matter even though a clean sample cannot usually be seen. |
| 42 | Particle | A tiny unit used in a model to explain matter. | A particle diagram represents arrangement and movement; its circles are not life-size photographs. |
| 43 | Solid | A state with a definite shape and volume under ordinary conditions. | An ice cube keeps its own shape when moved between containers. |
| 44 | Liquid | A state with a definite volume but no fixed shape. | Water takes the shape of the part of the container it occupies. |
| 45 | Gas | A state with no fixed shape or volume. | Air spreads to fill the available space in a closed container. |
| 46 | State | The physical form of a substance, such as solid, liquid or gas. | Ice and liquid water are different states of the same substance. |
| 47 | Property | A characteristic that helps describe or identify a material. | Density is one property that can help compare materials. |
| 48 | Density | Mass per unit volume of a substance or object. | A sample of mass 40 g and volume 20 cm³ has density 2 g/cm³. |
| 49 | Conductivity | A material’s ability to transfer heat or carry electric current. | State whether the question concerns thermal conductivity or electrical conductivity. |
| 50 | Magnetism | A property associated with magnetic forces and magnetic materials. | Iron can be attracted to a magnet; many other metals are not. |
Words 51–60: naming changes accurately
| Number | Term | Meaning | Example |
|---|---|---|---|
| 51 | Melting | The change from solid to liquid. | Ice melts into liquid water when sufficient energy is transferred to it. |
| 52 | Freezing | The change from liquid to solid. | Liquid water freezes into ice when it loses sufficient energy under suitable conditions. |
| 53 | Evaporation | The change from liquid to gas at the liquid’s surface. | A wet cloth can dry without its water reaching boiling point. |
| 54 | Boiling | Vaporisation throughout a liquid at its boiling temperature for the given pressure. | During boiling, vapour bubbles form within the liquid as well as at its surface. |
| 55 | Condensation | The change from gas or vapour to liquid. | Water vapour in the surrounding air condenses on a sufficiently cold cup. |
| 56 | Expansion | An increase in size or volume. | Many materials expand when heated; the model does not require individual particles to grow. |
| 57 | Contraction | A decrease in size or volume. | Many materials contract when cooled, although water has important exceptions near freezing. |
| 58 | Heat transfer | Energy transfer caused by a temperature difference. | Energy transfers from warmer water to a cooler spoon placed in it. |
| 59 | Physical change | A change that does not produce a new substance. | Cutting paper changes its size and shape without making a new substance. |
| 60 | Chemical change | A change in which new substances form. | Rusting produces substances with properties different from those of the original iron. |
Do not use reversibility as the only test for a physical or chemical change. Cutting a sheet into pieces is difficult to reverse neatly, but that does not make it a chemical reaction. Ask whether new substances formed and what evidence supports that answer. Similarly, an observed colour change needs interpretation in context; a label alone is not a complete explanation.
A clear liquid need not be pure water. Dissolved substances can be present even when no solid is visible. This is a useful starting point for teaching the difference between appearance and composition. Students should describe what they can observe, then use the information in the question to decide what the sample contains.
Words 61–70: what a sample contains
| Number | Term | Meaning | Example |
|---|---|---|---|
| 61 | Substance | A kind of matter; a pure substance has a definite composition. | Pure water is one substance, whereas seawater contains several dissolved substances. |
| 62 | Element | A pure substance made of only one type of atom. | Copper is an element; copper atoms are not miniature pieces of copper-coloured metal. |
| 63 | Compound | A pure substance containing different elements chemically combined in fixed proportions. | Water contains hydrogen and oxygen chemically combined, rather than simply mixed together. |
| 64 | Mixture | Two or more substances together without all being chemically combined. | A mixture of sand and salt can contain different proportions of its components. |
| 65 | Solute | A substance dissolved in a solvent to form a solution. | In sugar solution, the dissolved sugar is the solute. |
| 66 | Solvent | The substance that dissolves the solute in a solution. | Water acts as the solvent when sugar dissolves in it. |
| 67 | Solution | A uniform mixture formed when a solute dissolves in a solvent. | Salt solution contains salt distributed throughout the water. |
| 68 | Soluble | Able to dissolve in a particular solvent under stated conditions. | Table salt is soluble in water, but solubility always refers to a particular solvent. |
| 69 | Insoluble | Not dissolving to an appreciable extent in a stated solvent. | Sand is treated as insoluble in water in a typical school separation task. |
| 70 | Suspension | A mixture containing undissolved particles dispersed in a fluid. | Muddy water contains suspended particles that may settle when it is left standing. |
Words 71–80: dissolving and separating
| Number | Term | Meaning | Example |
|---|---|---|---|
| 71 | Dissolve | Mix into a solvent at particle level to form a solution. | Sugar dissolves in water; this does not mean the sugar has become liquid sugar. |
| 72 | Concentration | The amount of solute present in a given amount of solution. | For equal solution volumes, more dissolved salt means a higher salt concentration. |
| 73 | Saturated solution | A solution containing the maximum dissolved solute at a specified temperature. | Extra solute remains undissolved when no more can dissolve under the same conditions. |
| 74 | Filtration | Separating suitable insoluble particles from a fluid using a filter. | Filtration removes sand from water but does not remove dissolved salt. |
| 75 | Residue | The solid left on the filter during filtration. | Sand is the residue when a sand-and-water mixture is filtered. |
| 76 | Filtrate | The fluid that passes through a filter. | The filtrate may still contain dissolved substances even when it looks clear. |
| 77 | Evaporating dish | A shallow laboratory dish used when evaporating a solvent. | A teacher may use an evaporating dish when demonstrating recovery of a dissolved solid. |
| 78 | Distillation | Separation involving vaporisation followed by condensation and collection. | Simple distillation can recover water from a suitable salt solution. |
| 79 | Chromatography | A method separating components through their different movement in a system. | Paper chromatography can separate some soluble dyes in an ink. |
| 80 | Chromatogram | The pattern or record produced by a chromatography separation. | Several separated spots suggest that the tested ink contains more than one detectable component. |
The purpose of the separation changes the answer. If the aim is to obtain dry salt from a suitable solution, removing the water may be appropriate. If the aim is to collect the water, merely letting it evaporate loses the wanted product. Ask “What must we keep?” before “Which method do we use?” This turns method names into practical reasoning.
Use this section when the school introduces the relevant biology or modelling topic. A labelled cell drawing helps students organise ideas, but it is a simplified representation. Real cells differ in shape and structure. A student should learn what a feature does and recognise relevant examples, rather than assume every cell looks exactly like a textbook outline.
Words 81–90: cells and levels of organisation
| Number | Term | Meaning | Example |
|---|---|---|---|
| 81 | Cell | The basic structural and functional unit of living organisms. | A leaf contains many cells, with different cells performing particular roles. |
| 82 | Cell membrane | A boundary controlling movement of substances into and out of a cell. | Plant cells have a cell membrane even though they also have a cell wall. |
| 83 | Cytoplasm | The material inside a cell where many chemical reactions occur. | A labelled diagram may show cytoplasm surrounding the nucleus. |
| 84 | Nucleus | A cell structure containing genetic material and directing many cell activities. | The nucleus has a different role from the cell membrane. |
| 85 | Cell wall | A supporting layer outside the membrane in plant cells. | The cell wall helps a plant cell maintain its shape. |
| 86 | Chloroplast | A structure containing chlorophyll where photosynthesis occurs in relevant plant cells. | Many leaf cells contain chloroplasts; ordinary root cells generally do not. |
| 87 | Vacuole | A membrane-bound compartment that may contain water and dissolved substances. | A mature plant cell commonly has a large central vacuole containing cell sap. |
| 88 | Tissue | A group of cells organised to carry out a particular function. | Muscle tissue contains cells specialised to contract. |
| 89 | Organ | A structure containing different tissues working together for particular functions. | The stomach is an organ containing several kinds of tissue. |
| 90 | Organ system | A group of organs working together to carry out major functions. | The digestive system contains organs with different roles in processing food. |
The word function asks what something does. The word structure asks about its physical arrangement or features. “It is green” may describe an appearance, but it does not explain a chloroplast’s function. Practise answering the question asked before adding extra facts. A short, relevant explanation is more useful than a paragraph of disconnected labels.
Words 91–100: connecting a part to the whole
| Number | Term | Meaning | Example |
|---|---|---|---|
| 91 | Organism | An individual living thing. | A bacterium and a tree are both organisms, despite their very different sizes. |
| 92 | Microscope | An instrument used to view objects too small to see clearly unaided. | A microscope makes selected cell features easier to observe. |
| 93 | Magnification | How many times larger an image appears compared with the object. | Increasing magnification does not always reveal extra detail in a blurry image. |
| 94 | Model | A simplified representation used to describe or explain something. | A particle model helps explain matter while leaving out many details. |
| 95 | Structure | The arrangement or physical features of something. | Describe a cell wall’s position before explaining how it supports the cell. |
| 96 | Function | The job or role performed by a part or system. | The function of the cell membrane includes controlling movement into and out of the cell. |
| 97 | System | A set of connected parts that interact. | Changing one component of a system may affect other connected components. |
| 98 | Interaction | An influence or effect between two or more things. | A magnet attracting an iron object demonstrates an interaction involving magnetic force. |
| 99 | Adaptation | A feature that helps an organism survive or reproduce in its environment. | Explain how a particular feature helps in the stated conditions, rather than merely naming it. |
| 100 | Relationship | A connection between quantities, conditions or parts. | Use the results to describe the relationship between the changed factor and the measured outcome. |
A workable Science answer usually identifies the relevant idea, connects it to the information provided and states the result. Consider a cold bottle with droplets on its outside. “Condensation” names the process but leaves the explanation incomplete. “Water vapour in the surrounding air loses energy at the cold surface and changes into liquid water” connects source, condition and change. The droplets did not necessarily leak through the bottle.
Now consider an equal-volume comparison: sample A has a mass of 30 g and sample B has a mass of 45 g. The student can say that B has a greater density because the same volume contains more mass. Merely saying that B is “heavier” omits the equal-volume condition that makes the comparison meaningful. Pointing to that condition is a small but important reading habit.
Try a correction routine with three passes. First, underline the object or substance being discussed. Second, circle the process or property. Third, check the connection between them. In “the particles melt and become larger”, the process has been attached to the wrong level of explanation. The substance changes state; the individual particles are not described as miniature pieces that melt and swell.
Parents do not need to replace the teacher’s terminology. If an explanation conflicts with the textbook or a returned assessment, write down the question and ask which part needs correction. Keep the improved sentence beside the original. The comparison makes progress visible and gives the student something specific to remember next time.
Complete these without looking at the tables. They are practice questions created for this guide, not an official assessment. If a topic has not been taught, set that question aside. An unfamiliar topic should not be counted as evidence that the child has failed to learn the current chapter.
- A student writes, “The liquid temperature increased from 22°C to 27°C.” Is this an observation or an inference? Explain.
- Two dissolving trials use equal sugar masses and equal water volumes at the same starting temperature. One is stirred and one is not. Identify the independent variable and a suitable dependent variable.
- A cylinder has five equal intervals between 20 cm³ and 30 cm³. What is one interval? What reading is three intervals above 20 cm³?
- A sample has mass 60 g and volume 20 cm³. Find its density and include the unit.
- Water droplets appear outside a cold cup. Name the change of state and identify where the water came from.
- Why does ordinary filtration remove sand from salt water without producing pure water?
- A student says that all plant cells contain chloroplasts. Improve the statement using a relevant example.
- A diagram uses large blue circles for particles. Give one reason the diagram is useful and one feature that should not be interpreted literally.
Answers and what to check
- Observation. It reports measured temperatures. An explanation for the temperature rise would be an inference requiring further information.
- Independent variable: whether stirring occurs. Dependent variable: the time taken for the sugar to dissolve. Use the same definition of the finishing point in both trials.
- 2 cm³ per interval; 26 cm³. The 10 cm³ difference is divided into five intervals. Counting marks instead of spaces can produce the wrong reading.
- 3 g/cm³. Density is 60 ÷ 20. The answer describes mass per unit volume; 3 g alone would give the wrong kind of quantity.
- Condensation. Water vapour in the surrounding air changes into liquid at the cold surface. The observation alone does not show that water leaked from inside.
- Sand is retained, while dissolved salt passes through with the water. The resulting filtrate may be clear but still contains dissolved salt.
- Many photosynthesising plant cells contain chloroplasts, but not all plant cells do. Ordinary root cells provide a familiar counterexample. Avoid replacing one absolute claim with another.
- Useful: the model can show arrangement or movement. Limit: the blue colour and drawn size are representations, not evidence that real particles are blue circles of that size.
Review the reason for each error. A missing unit needs a measurement habit; a wrong process needs a concept repair; a correct idea expressed unclearly needs language practice. Repeating the entire list treats these different difficulties as if they were identical. Choose the next activity from the actual error.
In a three-student lesson, one possible activity begins with a drawing of a sand-and-salt-water mixture. Each learner first writes an individual answer to “What could filtration separate?” Independent writing matters because a confident classmate’s answer can otherwise hide someone else’s misunderstanding. The tutor reads all three answers before deciding what to teach next.
One student might know the method but confuse residue and filtrate. Another might think clear water must be pure. A third might recognise both ideas but give no reason. These learners can work with the same example while receiving different prompts. “Which part remains on the paper?” helps the first; “Where is the dissolved salt?” challenges the second; “What property makes this possible?” extends the third.
The students can then rotate roles: explain, question and check. The checker must refer to the diagram and the scientific idea, rather than simply announce whether an answer sounds right. A later individual question changes the mixture or the required product. That final step reveals whether the explanation transfers beyond the example just discussed.
For parents comparing Science small groups tuition in Punggol, useful questions include how the tutor checks each child’s understanding, how school topics are selected, and what happens when a misconception persists. A small class creates opportunities for individual feedback, but the number of students alone does not demonstrate teaching quality. Look for corrected work and explanations the child can reproduce independently.
Start with five terms from the current chapter. Ask the child to explain each in everyday language, then return to the scientific wording. For example, “what passes through the filter” can lead to filtrate. The everyday explanation checks meaning; the subject term makes the answer precise. Neither needs to replace the other permanently.
On the next study occasion, hide the definitions and ask for a different example. A child who learnt condensation through a cold bottle might explain a similar observation on a cold surface. If the new example becomes confusing, revisit where the water comes from and which state change occurs. This is more revealing than asking for the same memorised sentence again.
Keep a small record with three columns: term, my explanation and an example I can explain. Add a fourth column only when needed: mistake to avoid. For mass, that reminder might be “do not use a volume unit”. For solution, it might be “clear does not mean pure”. The record should contain the child’s actual learning needs, not a copied page of every available fact.
When the week is busy, reduce the number of words and keep the application step. One carefully explained question can reveal more than a rushed spelling test. Punggol families can use an ordinary conversation after school to revisit a term, but observations around the neighbourhood should remain examples rather than invented evidence for a scientific claim.
What if the child can say it but cannot write it?
Let the child speak first, identify the necessary idea together, and then write one sentence. Check the scientific meaning before polishing every grammar detail. Gradually reduce the prompting so the student can produce the explanation alone.
What if the child already knows the list?
Move to unfamiliar diagrams, comparisons and explanations. Ask what evidence would change the answer. Knowing the terms is a starting point; choosing the relevant term and defending its use shows deeper understanding.
Should all 100 terms be learnt for the next assessment?
No. Follow the school’s assessment scope. Revisit earlier foundations when they support the present topic, and leave later units until they are useful. This resource is a reference and practice guide, not a replacement scheme of work.
Use MOE’s G2/G3 Lower Secondary Science syllabus for the curriculum framework and the school’s current instructions for classroom scope. For later examination context, consult SEAB’s SEC overview and its 2027 G2 syllabus directory. The definitions, examples, practice questions and study routine in this article are eduKate’s original teaching material.
Continue with the Science learning guide or discuss the student’s current work with eduKatePunggol.

