Small Group Tutorials

Here to help students catch up, keep up, and move ahead. Book a consultation here.

Top 100 Secondary 1 G2 Vocabulary List for Punggol | Mathematics Small Groups Tuition

Three students sit around open books and worksheets at a classroom table, reading, writing and discussing the work together.

This Top 100 Secondary 1 G2 Vocabulary List for Punggol helps students read Mathematics questions, understand explanations and write clearer solutions. It teaches terms such as coefficient, equivalent ratio, original quantity and perpendicular height, with short meanings and examples. Start with the words in your child’s present school topic. Understanding a question helps the student choose a first move, whether learning independently or attending Mathematics small groups tuition.

The 100 entries are eduKate’s selected learning vocabulary, including essential word phrases, rather than an official MOE or SEAB Top 100 list. They support Secondary 1 G2 classroom learning and do not predict examination questions. Each entry needs to become usable: recognise it, explain it, carry out its instruction and check the answer. Worked examples, a short diagnostic and a manageable practice routine help parents support learning without turning every evening into another lesson.

  • For: Secondary 1 students taking Mathematics at G2 and their parents in Punggol.
  • Contains: exactly 100 numbered vocabulary entries, grouped into ten sets of ten.
  • Use first: the set matching the current school chapter and the words behind recent mistakes.
  • Practise: meanings together with calculations, diagrams, explanation and checking.
  • Assessment: follow the school’s stated scope; Secondary 1 school assessments are distinct from the later SEC examination.
  • Support: use independent practice, school help or a focused three-student tutorial according to the actual difficulty.

eduKate Punggol · Secondary 1 G2 · Mathematics

Find your next learning step

Choose the part that matches today’s schoolwork. The full teaching guide stays open below.

eduKate Punggol Mathematics Tuition · 11-second introduction

Full chapter index · Mathematics learning and tuition guide

CHAPTER 1 OF 11

1. What this list helps a Secondary 1 G2 student do

Back to contents

Under MOE’s Full Subject-Based Banding framework, G2 describes a subject level, and students can take different subjects at different levels. Say “taking Mathematics at G2” rather than using one subject level to describe the whole child.

The MOE G2 Mathematics syllabus, Section 4, pages 25–26, provides the Secondary 1 reference: number work, ratio and percentage, rates, introductory algebra and equations, angles, measurement and basic data displays. This bank also revisits earlier knowledge. Follow the school’s current topic list when choosing words.

SEAB explains that the SEC begins in 2027 and records subjects at their respective levels. That school-leaving examination is separate from Secondary 1 school assessments. Its syllabus is not a Secondary 1 revision checklist.

CHAPTER 2 OF 11

2. Words 1–20: Make number language reliable

Back to contents

Words 1–10: Numbers and operations

NumberTermMeaningExample
1integerA whole number, its negative, or zero; it has no fractional part.−4 is an integer; 1.5 is not.
2positive numberA number greater than zero, on the right of zero on a number line.Both 6 and 0.2 are positive numbers.
3negative numberA number less than zero, on the left of zero on a number line.−6 is smaller than −2, although 6 is greater than 2.
4rational numberA number expressible as a fraction of two integers, with a non-zero denominator.−3/4 and 0.5 are rational numbers.
5number lineA line showing numbers in order, with equal numerical intervals represented by equal distances.Moving right from −3 to 2 increases the value by 5.
6ascending orderAn arrangement from the smallest value to the largest value.The numbers −3, −1, 2 are in ascending order.
7sumThe result obtained by adding numbers or expressions.The sum of −2 and 7 is 5.
8differenceThe result of subtraction; read the stated order carefully.Subtracting 5 from 12 gives a difference of 7.
9productThe result obtained by multiplying numbers or expressions.The product of −3 and 4 is −12.
10quotientThe result obtained by dividing one quantity by another non-zero quantity.The quotient of 18 divided by 3 is 6.
Selected vocabulary 1–10 · Meanings and original examples

Words 11–20: Factors and powers

NumberTermMeaningExample
11factorIn whole-number work, a positive integer that divides another positive integer exactly.6 is a factor of 24 because 24 ÷ 6 = 4.
12multipleA number obtained by multiplying a given number by an integer.24 is a multiple of 6 because 24 = 6 × 4.
13prime numberAn integer greater than 1 with exactly two positive factors: 1 and itself.13 is prime; 1 is not prime.
14prime factorisationWriting a positive integer greater than 1 as a product of prime numbers.60 = 2 × 2 × 3 × 5.
15highest common factorThe greatest positive integer that divides each of the given positive integers exactly.The HCF of 18 and 24 is 6.
16lowest common multipleThe smallest positive number that is a multiple of each given positive integer.The LCM of 4 and 6 is 12.
17squareThe result of multiplying a number by itself.The square of −5 is 25 because (−5) × (−5) = 25.
18square rootA number whose square gives the stated value; the √ symbol names the non-negative root.√49 = 7; both 7 and −7 have square 49.
19cubeThe result of multiplying three copies of the same number.The cube of −2 is (−2) × (−2) × (−2) = −8.
20cube rootA number which, when cubed, gives the stated value.The cube root of −8 is −2.
Selected vocabulary 11–20 · Meanings and original examples

Factor and multiple point in different directions: 6 is a factor of 24, while 24 is a multiple of 6. Write the calculation proving each statement. Before finding HCF or LCM, identify what is being sought: a shared divisor or a shared positive multiple.

Keep brackets visible. The expression (−5)² means (−5) × (−5), giving 25. The expression −5² conventionally means −(5²), giving −25. The calculator entry must match the intended expression; the student should explain the difference.

CHAPTER 3 OF 11

3. Words 21–40: Identify the comparison and the whole

Back to contents

Before calculating, underline the instruction and identify its reference: the required precision, the order of a ratio, or the quantity representing 100%. Familiar-looking numbers can otherwise invite the wrong operation.

Words 21–30: Accuracy and comparison

NumberTermMeaningExample
21approximationA value close to another value, used when an exact value is unnecessary or unavailable.3.14 is an approximation to π, not its exact value.
22estimateA rough result found using convenient values and reasonable calculation.Estimate 19.8 × 4.1 using 20 × 4 = 80.
23roundingReplacing a value by the nearest value at a specified level of precision.7.36 rounded to one decimal place is 7.4.
24decimal placeA position to the right of the decimal point.3.482 rounded to two decimal places is 3.48.
25significant figureA digit counted from the first non-zero digit when stating numerical precision.0.00483 to two significant figures is 0.0048.
26less thanSmaller in value; represented by the symbol <.−5 < −2, so −5 is less than −2.
27at mostNo greater than a stated value; the stated value is included.At most 6 means 6 or less, written x ≤ 6.
28at leastNo smaller than a stated value; the stated value is included.At least 4 means 4 or more, written n ≥ 4.
29ratioAn ordered comparison of quantities, using matching units where necessary.Red to blue is 3:5, so the order of colours matters.
30equivalent ratioA ratio with the same comparison, found by multiplying or dividing every part equally.3:5 and 6:10 are equivalent ratios.
Selected vocabulary 21–30 · Meanings and original examples

Words 31–40: Shares and percentages

NumberTermMeaningExample
31simplest formFor an integer ratio, a form whose parts have no common factor greater than 1.12:16 becomes 3:4 after both parts are divided by 4.
32shareA portion allocated from a total according to the stated relationship.Sharing 25 in the ratio 2:3 gives shares of 10 and 15.
33percentageA way of expressing an amount relative to a reference quantity as parts per hundred.25% of 80 is 20 because 25/100 × 80 = 20.
34wholeThe reference quantity treated as 100% in a percentage calculation.If 12 of 30 students walk, the whole is 30 students.
35percentage increaseThe increase divided by the original quantity, then multiplied by 100%.An increase from 40 to 50 is 10/40 × 100% = 25%.
36percentage decreaseThe decrease divided by the original quantity, then multiplied by 100%.A decrease from 50 to 40 is 10/50 × 100% = 20%.
37percentage pointA unit for the difference between two values already expressed as percentages.A rise from 60% to 75% is 15 percentage points.
38reverse percentageFinding an original quantity from a later quantity after a percentage change.After a 20% discount, $8 represents 80% of the original $10.
39original quantityThe starting amount used as the reference before a stated change.For a rise from 30 to 36, the original quantity is 30.
40percentage multiplierA decimal factor that produces the required percentage amount or changed quantity.A 15% increase uses 1.15; a 15% decrease uses 0.85.
Selected vocabulary 31–40 · Meanings and original examples

For 12 walkers and 18 non-walkers, the fraction who walk is 12/(12 + 18), or 12/30. Writing 12/18 compares the two groups instead of comparing walkers with everyone. The question determines which relationship is needed.

Moving from 60% to 75% is an increase of 15 percentage points. Relative to the original 60%, it is an increase of 15/60 × 100% = 25%. Say which comparison you mean.

CHAPTER 4 OF 11

4. Words 41–60: Read rates and algebra as relationships

Back to contents

A rate expresses a relationship, such as metres travelled per minute. In algebra, letters represent quantities and operations connect them. Practise moving from a sentence to symbols and back without changing the relationship.

Words 41–50: Rates, units and formulae

NumberTermMeaningExample
41rateA comparison between two quantities, often measured in different units.Reading 24 pages in 4 minutes gives a rate of 6 pages per minute.
42unit rateA rate expressed for one unit of the comparison quantity.If five identical notebooks cost $10, the unit price is $2 per notebook.
43speedThe distance travelled per unit of time.Travelling 100 metres in 20 seconds gives an average speed of 5 m/s.
44distanceThe length travelled along a route, rather than merely the separation between its endpoints.Walking 300 m out and 300 m back covers a distance of 600 m.
45timeThe duration used in the calculation; distinguish it from a clock reading.A journey from 3.10 pm to 3.40 pm takes 30 minutes.
46constant speedA speed that stays unchanged, so equal time intervals cover equal distances.At a constant 2 m/s, each five-second interval covers 10 metres.
47average speedThe total distance divided by the total time for the whole stated journey.A 600 m journey taking 10 minutes has average speed 60 m/min.
48unit conversionExpressing the same quantity in a different unit without changing its actual size.1.5 km is 1500 m; the distance has not changed.
49formulaAn equation stating a relationship between quantities, commonly using letters.For a rectangle, A = lw relates area, length and width.
50substitutionReplacing a letter with its given value, preserving brackets and operations.When x = −2, 3x + 4 becomes 3(−2) + 4 = −2.
Selected vocabulary 41–50 · Meanings and original examples

Words 51–60: Reading algebra

NumberTermMeaningExample
51variableA symbol representing a quantity that can take different values in a stated situation.In a cost expression 2n, n can represent the number of notebooks.
52constantA value that remains fixed within the expression or situation being considered.In 3x + 4, the constant term is 4.
53coefficientThe numerical multiplier of a variable part, including its sign.The coefficient of x in −5x is −5.
54termA part of an expression separated by addition or subtraction at its outer level.The terms of 3x − 4 are 3x and −4.
55like termsTerms with the same variable part, including the same powers of the variables.2x and 7x are like terms; 2x and 2y are not.
56expressionA mathematical phrase formed from numbers, letters and operations.3x + 4 is an expression; it does not state an equality.
57simplifyRewrite an expression in a more convenient equivalent form.Simplifying 2x + 5x − 3 gives 7x − 3.
58expandMultiply through brackets to write an equivalent expression without those brackets.Expanding 3(x + 2) gives 3x + 6.
59sequenceAn ordered list of terms, often described by a rule connecting position and value.The sequence 3, 5, 7, 9 increases by 2 each time.
60nth termA rule giving a sequence term from its position n.For 3, 5, 7, 9, the nth term is 2n + 1, starting at n = 1.
Selected vocabulary 51–60 · Meanings and original examples

In a fictional stationery example, each notebook costs $2 and n notebooks cost 2n dollars. Here n is a quantity being multiplied. Adding a fixed $3 charge gives 2n + 3. Ask what changes when n changes and what stays fixed.

Check a sequence rule at several positions. “Add two” describes movement between consecutive terms of 3, 5, 7, 9. The rule 2n + 1 instead gives a term directly from its position, starting at n = 1.

CHAPTER 5 OF 11

5. Words 61–80: Choose the right action and angle reason

Back to contents

Simplification rewrites an expression; evaluation calculates its value; solving finds an unknown satisfying an equation. In geometry, check conditions before giving a reason: corresponding angles are equal when the relevant lines are parallel.

Words 61–70: Equations and useful instructions

NumberTermMeaningExample
61equationA statement that two expressions have equal values.3x + 4 = 25 is an equation.
62linear equationHere, an equation in one unknown that can be arranged as ax + b = 0, with a ≠ 0.2x + 7 = 19 is a linear equation.
63unknownA quantity whose value has not yet been found in the problem.In 3x + 4 = 25, x represents the unknown number.
64solutionA value of the unknown that makes an equation true.x = 7 is a solution of 3x + 4 = 25.
65solveFind the value or values that satisfy the stated equation or problem.To solve 2x = 14, divide both sides by 2.
66evaluateCalculate the numerical value of an expression using the supplied information.Evaluate 2x + 1 when x = 4: the value is 9.
67consecutiveFollowing immediately in order within the stated number sequence.7, 8 and 9 are consecutive integers.
68verifyCheck that a result satisfies the original statement or required condition.Substitute x = 7 into 3x + 4 to verify that the result is 25.
69justifyGive a mathematical reason supporting a step, statement or conclusion.Justify equal angles by naming the relevant angle property.
70inverse operationAn operation that reverses another operation in the relevant situation.Subtracting 4 reverses adding 4; dividing by 3 reverses multiplying by 3.
Selected vocabulary 61–70 · Meanings and original examples

Words 71–80: Angles and triangles

NumberTermMeaningExample
71acute angleAn angle greater than 0° and smaller than 90°.An angle measuring 35° is acute.
72right angleAn angle measuring exactly 90°.Perpendicular lines meet at right angles.
73obtuse angleAn angle greater than 90° and smaller than 180°.An angle measuring 125° is obtuse.
74reflex angleAn angle greater than 180° and smaller than 360°.An angle measuring 240° is reflex.
75vertically opposite anglesOpposite angles formed by two intersecting straight lines; each opposite pair is equal.If one angle is 68°, its vertically opposite angle is also 68°.
76corresponding anglesAngles in matching positions where a transversal crosses two lines; equal if the lines are parallel.With parallel lines, an angle corresponding to 62° is 62°.
77alternate interior anglesAngles inside two lines on opposite sides of a transversal; equal when the lines are parallel.For parallel lines, an alternate interior angle matching 74° is 74°.
78co-interior anglesAngles inside two lines on the same side of a transversal; their sum is 180° when the lines are parallel.If one is 110°, the other is 70° when the lines are parallel.
79isosceles triangleA triangle with at least two equal sides; angles opposite those equal sides are equal.If its two equal base angles are 50°, its remaining angle is 80°.
80equilateral triangleA triangle with three equal sides and three equal angles.Every interior angle of an equilateral triangle measures 60°.
Selected vocabulary 71–80 · Meanings and original examples

A transversal crosses two other lines. Identify those lines and any given parallel-line information before naming an angle relationship. Familiar letter shapes can be visual aids, but do not replace mathematical conditions. Rotating a drawing should not change the reason.

Connect the terms to angle sums: 180° on a straight line, 360° around a point and 180° inside a triangle in ordinary plane geometry. State a clear reason at each step, then check that the resulting angles fit the figure’s conditions.

CHAPTER 6 OF 11

6. Words 81–100: Match measurements and read displays carefully

Back to contents

A boundary needs length units; a surface needs square units; volume needs cubic units. Data questions require labels and scales. Name the requested quantity before choosing a formula or comparing bars and pictures.

Words 81–90: Measurement and solids

NumberTermMeaningExample
81perimeterThe total distance around the outside boundary of a plane figure.A 6 cm by 4 cm rectangle has perimeter 20 cm.
82areaThe amount of two-dimensional surface inside a boundary, measured in square units.A 6 cm by 4 cm rectangle has area 24 cm².
83parallelogramA quadrilateral whose opposite sides are parallel.Its area is base × perpendicular height, not base × sloping side.
84trapeziumA quadrilateral with one pair of parallel sides, which are used as its two bases.With parallel sides 4 cm and 8 cm and height 3 cm, area is 18 cm².
85perpendicular heightA distance measured at right angles to the chosen base.A sloping side of 5 cm does not automatically give a height of 5 cm.
86composite figureA plane shape assembled from simpler shapes whose relevant measurements can be combined.An L-shaped floor can be split into two non-overlapping rectangles.
87volumeThe amount of three-dimensional space occupied, measured in cubic units.A box measuring 2 cm by 3 cm by 4 cm has volume 24 cm³.
88surface areaThe total area of the specified surfaces of a solid.An open box and a closed box with equal dimensions have different surface areas.
89prismA solid with congruent parallel polygonal ends and parallelogram side faces.A right prism with end area 6 cm² and length 5 cm has volume 30 cm³.
90cylinderA solid with equal parallel circular ends joined by a curved surface.A right circular cylinder has volume πr²h, with radius r and perpendicular height h.
Selected vocabulary 81–90 · Meanings and original examples

Words 91–100: Data and its displays

NumberTermMeaningExample
91dataRecorded information collected to answer a question or describe a situation.The numbers of books borrowed each day form a set of data.
92categoryA group used to classify observations according to a stated feature.Walking, cycling and taking a bus can be travel categories.
93frequencyThe number of times a value or category occurs in the collected data.If 12 students choose walking, that category has frequency 12.
94tableInformation arranged in labelled rows and columns.Read the row heading and column heading before selecting a number.
95bar graphA display using separate bars whose lengths or heights represent values on a scale.A bar reaching 15 on the frequency axis represents 15 observations.
96pictogramA display using pictures or symbols, with a key stating what each represents.If one symbol represents 4 students, three symbols represent 12 students.
97line graphA display joining plotted data points to show how a quantity changes across an ordered sequence.A daily reading graph can show an increase followed by a decrease.
98pie chartA circular display dividing a whole into sectors representing its parts.One quarter of the whole is represented by a 90° sector.
99scaleThe numerical values assigned to positions or intervals on a graph.If each interval represents 5, three intervals above zero represent 15.
100misleading graphA display whose presentation can give a distorted impression of the underlying data.An undisclosed truncated axis can make a small difference appear much larger.
Selected vocabulary 91–100 · Meanings and original examples

Conversion factors depend on dimension. Since 1 m = 100 cm, a one-metre square has area 100 × 100 = 10,000 cm². Thus 1 m² = 10,000 cm². Similarly, 1 m³ = 1,000,000 cm³. The length conversion factor cannot simply be reused for area and volume.

A closed right circular cylinder of radius 2 cm and height 5 cm has volume 20π cm³. Its total surface area includes both circular ends and its curved surface: 2π × 2² + 2π × 2 × 5 = 28π cm². For an open container, identify which surfaces exist.

Read a graph’s title, labels, unit and scale before making a claim. A line rising on Tuesday and falling on Wednesday does not support “it increased every day”. Separate what the data shows from an explanation you are merely suggesting.

CHAPTER 7 OF 11

7. Worked examples: Turn vocabulary into a solution

Back to contents

Example A: A ratio compares parts; the total contains all the parts

In this fictional example, a Punggol student has 35 folders, with red to blue in the ratio 2:3. How many are red? The total contains 2 + 3 = 5 equal ratio parts. One part represents 35 ÷ 5 = 7 folders; red represents 14 and blue represents 21. Check both conditions: 14 + 21 = 35 and 14:21 simplifies to 2:3.

The tempting calculation 2/3 × 35 uses the wrong whole. The 3 compares blue with red; it does not represent all folders. A helpful correction is to draw five equal boxes, label two red and three blue, and place the total of 35 across all five. Then repeat with a different total without copying the completed drawing.

Example B: A discounted amount is a percentage of an earlier amount

In a fictional price question, a notebook costs $8 after a 20% discount. The original amount represents 100%, and the remaining amount represents 80%. Therefore 0.8 × original price = 8, giving original price = 8 ÷ 0.8 = $10. Verify: 20% of $10 is $2, and $10 − $2 = $8. Adding 20% of $8 would use the reduced price as the reference and would not reverse the original reduction.

Example C: An equation states a condition that the answer must satisfy

Three packets each contain x stickers. Four loose stickers bring the total to 25. The expression for all the stickers is 3x + 4, and the equation is 3x + 4 = 25. Subtract 4 from both sides to obtain 3x = 21, then divide both sides by 3 to obtain x = 7. The check 3 × 7 + 4 = 25 confirms the solution in the original situation. It also tells us what 7 represents: stickers in each packet.

Now compare the instruction “simplify 4x − 2(3x − 5)”. There is no value to find for x. Expanding gives 4x − 6x + 10, so the simplified expression is −2x + 10. The positive 10 comes from multiplying −2 by −5. Reading the sign as part of the multiplier prevents a common error.

CHAPTER 8 OF 11

8. A short diagnostic, with answers and useful corrections

Back to contents

After the relevant topics have been taught, let the student attempt these questions independently and explain each answer. Use this learning check to locate the first uncertainty, rather than predict a grade or label the child.

  1. Calculate −4 − (−7). Explain what subtracting a negative does here.
  2. Find the HCF of 18 and 24. Explain why 72 cannot be the answer.
  3. Round 0.00726 to two significant figures.
  4. Simplify 4x − (x − 2).
  5. A total of 40 is shared in the ratio 3:5. Find the smaller share.
  6. A journey covers 2400 m in 30 minutes, including a stop. Find its average speed in m/min.
  7. An isosceles triangle has vertex angle 40°. Find each base angle.
  8. A pictogram uses one complete symbol for four students. How many students do seven complete symbols represent?

Answers and what they check

1. 3. The calculation becomes −4 + 7. If the student answers −11, revisit the operation before practising longer expressions. 2. 6. It divides both numbers exactly. Although 72 is a common multiple, it is not a common factor. Ask the student to state the direction of the relationship.

3. 0.0073. Begin counting significant figures at the first non-zero digit, 7; the following digit is rounded using the next one. 4. 3x + 2. Subtracting the bracket changes the signs of both terms inside it: 4x − x + 2. A correct answer should come with that explanation.

5. 15. Eight ratio parts represent 40, so one part is 5 and three parts are 15. 6. 80 m/min. Divide the total distance by the full stated journey time. The stop remains in that total time. There is no need to invent a separate moving speed.

7. 70° each. Subtract 40° from 180°, then divide the remaining 140° equally. 8. 28 students. Multiply seven symbols by four students per symbol. If an answer is wrong, ask whether the difficulty came from the vocabulary, the mathematical idea, the calculation or the written presentation. Give one correction and one fresh example addressing that particular cause.

CHAPTER 9 OF 11

9. Build a routine that fits school and family life

Back to contents

This four-week starter is not a deadline for all 100 entries. Choose about ten useful words weekly, fewer when an idea needs more teaching. Fit a clear, short task around schoolwork and CCA instead of asking a child to “revise everything”.

Week one: connect words to current work. Select words from the present chapter and recent corrections. Record a meaning in the student’s own words, an example and a warning. For “coefficient”, the warning might be “include the negative sign”.

Week two: retrieve before looking. Cover the meaning, ask for an explanation and give a fresh question using the word. If the definition is remembered but the task remains difficult, revisit an example and identify the missing step.

Week three: mix familiar instructions. Compare “simplify”, “evaluate” and “solve”, or perimeter, area and volume. Ask what kind of answer each requires. Keep calculations manageable while the distinctions are being established.

Week four: check independent use. Revisit earlier words in fresh problems and compare explanations with first attempts. Retain uncertain words in the next cycle. Record concrete improvements: choosing the correct whole, including units or explaining an angle reason without prompting.

CHAPTER 10 OF 11

10. What useful three-student Mathematics tuition should reveal

Back to contents

Each student in a three-student tutorial should attempt, explain and correct work. Give all three a short question independently before discussion. One can explain a method, another check a condition and the third test the answer. Rotate roles so everyone practises each responsibility.

Identify individual difficulties: misunderstanding “at most”, losing a negative sign and omitting justification need different corrections. Extra questions help when they address the actual missing skill.

A learner needing repair can begin with a clear meaning, diagram and supported example. For steadier performance, mix familiar instructions without naming the chapter. For extension, compare valid solutions or explain why a wrong method fails. These routes deepen control without rushing into later-year material.

Bring a marked worksheet, the topic list and homework that stalled. Ask, “Which word or idea caused the first difficulty, and what will my child try independently next?” No class size, vocabulary list or number of completed worksheets guarantees a particular grade.

CHAPTER 11 OF 11

11. Questions parents ask before the next learning step

Back to contents

Must my child memorise the exact definitions?

Accept an accurate explanation in the student’s own words, then check it with an example and a non-example. For a prime number, ask why 13 qualifies and why 1 does not. Meaning should guide a decision.

Should we finish all 100 words before the next assessment?

Follow assessed topics first. Select terms linked to the school’s scope and the student’s mistakes. The bank is a reference, not a compulsory last-minute checklist; leave unfamiliar topics for the appropriate teaching sequence.

Can a home language help?

A familiar language can help explain meaning. Reconnect it to the English term in the worksheet, especially for words such as “difference”, “term” and “volume”. Check the mathematical meaning through numbers or a diagram, beyond the translation.

Will this list secure a change to G3 Mathematics?

A vocabulary list cannot determine a subject-level decision. Discuss suitable demands with the school using actual learning and performance. The immediate goal is more accurate, independent Mathematics at the level currently being studied.

What should we do today?

Choose one recent error and explain the question again. Work through one example together, then attempt a new example independently. If difficulty persists, show both attempts to the teacher or tutor. See Secondary 1 Mathematics tuition at eduKatePunggol or arrange a learning consultation.

Official references

Curriculum and pathway information checked on 16 November 2026. The vocabulary definitions, fictional scenarios, diagnostic questions and practice suggestions in this article are original learning material.

Continue with the Mathematics learning guide or discuss the student’s current work with eduKatePunggol.

Continue from here: Start Here · Tuition · Education · Pathways · Parenting 101 · All Site Routes

eduKate Punggol

Contact

83 Punggol Central, Singapore 828761

edu|Kate Bukit Timah

8 Fourth Avenue, Singapore 268674

By Appointment +65 8823 1234
admin@edukatesg.com

Email Us

When a child finally understands, school becomes less frightening and the future opens wider. Email us for the latest schedules and fees.

← 返回

感谢您的回复。 ✨