This Top 100 Secondary 1 G1 vocabulary list for Punggol helps students understand Science questions, describe observations and explain answers clearly. The one hundred selected terms cover measurement, laboratory language, matter, mixtures, water and air pollution, and introductory forces. Each entry gives a simple meaning and an original example, so students can move from recognising a word to using it in a school question.
Begin with five to ten words from the topic being taught at school. Say what each word means, compare it with a commonly confused term and answer a short question without looking at the list. In Science small-group tuition, three students can explain, question and check one another’s reasoning before completing an individual task. This is an eduKate-curated learning resource, not an official MOE or SEAB prescribed vocabulary list.
- Level: Secondary 1 students studying Science at G1, with topic selection matched to the school sequence.
- What is included: Exactly 100 numbered words and short scientific terms in ten useful groups.
- How to learn: Meaning, example, comparison, then an independent question.
- Important distinctions: Observation and inference; mass and weight; solubility and rate of dissolving; residue and filtrate.
- Practice: Four worked scenarios, a ten-question check and a flexible fortnight routine.
- Small-group focus: Three students, rotating explanations and individual checking.
- Parent support: Use the current school topic and recent work to choose the next manageable step.
Contents
Understand the guide · Chapters 1–1
Find the 100 words · Chapters 2–11
- Words 1–10: Asking questions and using evidence
- Words 11–20: Measurement and units
- Words 21–30: Apparatus and laboratory safety
- Words 31–40: Matter, properties and density
- Words 41–50: Changes of state
- Words 51–60: Dissolving and mixtures
- Words 61–70: Separation, acids and alkalis
- Words 71–80: Water and environmental responsibility
- Words 81–90: Air quality and pollutants
- Words 91–100: Introductory forces and simple machines
Work through examples · Chapters 12–16
Check and practise · Chapters 17–18
The MOE G1 Lower Secondary Science syllabus allows schools to choose their teaching order. Its suggested Secondary 1 coverage includes Laboratory Measurements and Procedures, Our Environment, and part of Machines Around Us (I). This guide therefore concentrates on measurement, matter, mixtures, pollution and introductory forces. Match the groups to the school’s current topic; the list is not a compulsory term-by-term sequence.
Under Full Subject-Based Banding, G1 is a subject level. A student may study different subjects at different levels; it is not a fixed label for the whole child.
SEAB lists G1 Science as K123 for the 2027 SEC examination. That is a later national examination reference, not a Secondary 1 paper. Follow the school’s assessment instructions now, and the applicable examination-year syllabus when the student reaches that stage.
Some entries are subject terms, such as solute. Others are supporting words, such as evidence and classify, that help students explain their understanding. Short phrases count as one entry when they name one idea. “Top 100” means a selected learning set here; it does not claim an official ranking, a complete syllabus or a prediction of examination questions.
For each word, aim to do three things: recognise it in a question, explain it simply and use it accurately in a new situation. You can know how to spell “filtration” yet still choose it for the wrong mixture. That is a concept to clarify, not a reason to copy the spelling another twenty times.
A good scientific answer separates what was seen from what might explain it. Start with an observation, identify the evidence, then offer an inference. These words help students avoid presenting a guess as a measured fact.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 1 | investigation | A planned way to gather evidence and answer a question. | An investigation compares how much water two types of paper absorb. |
| 2 | observation | Information noticed directly or obtained using an instrument. | The thermometer reading changed from 20°C to 24°C. |
| 3 | inference | A possible explanation drawn from observations and existing knowledge. | The wet patch may have come from the bottle lying beside it. |
| 4 | prediction | An expected outcome stated before checking it. | I predict smaller sugar grains will dissolve sooner under the same conditions. |
| 5 | evidence | Observations or measurements that help us assess a claim. | The recorded volumes provide evidence for comparing the two papers. |
| 6 | variable | A factor that can change, be measured, or be kept unchanged. | Water temperature is one variable in a dissolving investigation. |
| 7 | fair test | A comparison that changes the factor being investigated while keeping other relevant factors the same. | Compare paper types using equally sized sheets and the same waiting time. |
| 8 | controlled variable | A relevant factor deliberately kept the same during a comparison. | The starting volume of water is a controlled variable. |
| 9 | repeat | To carry out a procedure again to check the pattern of results. | Repeat the paper test with fresh sheets of the same size. |
| 10 | conclusion | An answer to the investigation question that is supported by the results. | In our three trials, paper A absorbed more water than paper B. |
Try it: A puddle is beside an open bottle. “There is a puddle” is an observation. “The bottle spilled” is an inference. The second statement may be reasonable, but the puddle alone does not prove its cause.
A number becomes useful when the quantity and unit are clear. “Twenty” could mean twenty seconds, twenty grams or twenty millilitres. Train yourself to read the instrument, name the quantity and attach the correct unit before moving on.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 11 | measurement | Finding the value of a quantity by comparing it with a standard, usually using an instrument. | A ruler gives the length of a leaf as 8.2 cm. |
| 12 | estimate | A sensible approximate value made without an exact measurement. | Estimate whether the desk is closer to one metre or ten metres long. |
| 13 | length | The distance between two points. | Measure the pencil from its tip to its opposite end. |
| 14 | mass | A measure of how much matter an object contains. | The electronic balance displays a mass of 125 g. |
| 15 | volume | The amount of space occupied by an object or substance. | The measuring cylinder contains 30 mL of water. |
| 16 | temperature | A measure of how hot or cold something is. | The water temperature is 28°C, according to the thermometer. |
| 17 | time interval | The duration between a starting event and an ending event. | The time interval from release to landing is two seconds. |
| 18 | unit | An agreed standard used to express a measurement. | Write 15 cm; the unit tells the reader what the number measures. |
| 19 | scale | Marked divisions used to read a measurement from an instrument. | Five equal gaps between 10 mL and 20 mL represent 2 mL each. |
| 20 | accuracy | How close a measurement is to the correct or accepted value. | For a 50 g reference mass, 49.9 g is closer than 45 g. |
Check your language: “The object is heavier” does not specify its mass. “The mass increased from 40 g to 55 g” records a clear comparison. Temperature and time also need their own units; neither can be described in centimetres.
Recognising a name is the beginning of practical understanding. Students also need to know what the apparatus measures and why it suits the task. A beaker may hold a liquid, while a measuring cylinder is designed for reading its volume more carefully.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 21 | apparatus | Equipment used for a practical activity or investigation. | A measuring cylinder is part of the apparatus for comparing liquid volumes. |
| 22 | measuring cylinder | A graduated container used to measure the volume of a liquid. | Choose a measuring cylinder with a suitable range for 25 mL. |
| 23 | electronic balance | An instrument that displays an object's mass digitally. | Check that the balance reads zero before placing the object on it. |
| 24 | thermometer | An instrument for measuring temperature. | The thermometer shows that one sample is warmer than the other. |
| 25 | stopwatch | An instrument used to measure a time interval. | Start the stopwatch when the teacher-defined starting event occurs. |
| 26 | hazard | Something with the potential to cause harm. | A broken glass container is a hazard that should be reported. |
| 27 | corrosive | Able to damage materials or living tissue through chemical action. | A corrosive label tells students that the substance requires special handling. |
| 28 | flammable | Able to catch fire easily under suitable conditions. | Keep a substance labelled flammable away from ignition sources as instructed. |
| 29 | irritant | Able to cause irritation on contact with the body. | An irritant symbol is a reason to follow the teacher's handling instructions. |
| 30 | environmental hazard | Something that can harm organisms or their surroundings. | A substance with an environmental hazard label needs the specified disposal method. |
A useful pairing exercise: Match mass with an electronic balance, temperature with a thermometer and a time interval with a stopwatch. Learn hazard symbols from the school laboratory guidance. Practical work follows the teacher’s instructions; this word list is not an instruction to handle chemicals independently.
Classification needs a rule. “These look similar” is less useful than “These samples are soluble in water.” Density also needs a comparison: a larger object may have more mass simply because it contains more material. Compare equal volumes when first learning the idea.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 31 | matter | Anything that has mass and occupies space. | Air inside an inflated balloon is matter even though it is usually invisible. |
| 32 | solid | A state of matter with a definite shape and volume under ordinary conditions. | A wooden block keeps its shape when moved between containers. |
| 33 | liquid | A state of matter with a definite volume but no fixed shape. | Water takes the shape of the lower part of its container. |
| 34 | gas | A state of matter that spreads to fill the available space. | Air spreads through the space inside a container. |
| 35 | material | A substance, or mixture of substances, from which something is made. | A spoon may be made from metal, plastic or wood. |
| 36 | property | A characteristic that can be observed or measured. | Whether a material dissolves in water is one property to investigate. |
| 37 | classify | To place things into groups using stated characteristics. | Classify the samples according to whether they dissolve in water. |
| 38 | density | How much mass is packed into a given volume. | Of two equal-volume blocks, the one with more mass is denser. |
| 39 | float | To remain supported in a fluid instead of sinking through it. | A piece of cork can float on the surface of water. |
| 40 | sink | To move down through a fluid rather than remain supported at its surface. | A solid steel cube normally sinks when placed in water. |
Common trap: A large piece of foam can float while a small steel object sinks. Size or mass alone does not settle the question. Ask about the object’s overall density relative to the surrounding liquid, using the conditions given in the question.
Use an arrow to learn each change: solid to liquid is melting, while gas to liquid is condensation. The direction matters. The words melting point and boiling point provide supporting language for changes of state; use the detail required in your school’s current lessons.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 41 | melting | A change from a solid into a liquid. | Ice becomes liquid water when it melts. |
| 42 | freezing | A change from a liquid into a solid. | Water becomes ice when it freezes. |
| 43 | boiling | A change from liquid to gas occurring throughout the liquid at its boiling temperature. | Bubbles of water vapour form within boiling water. |
| 44 | evaporation | A change from liquid to gas at the liquid surface, which can happen below boiling temperature. | A wet cloth can become dry without its water boiling. |
| 45 | condensation | A change from gas into liquid. | Water vapour in air can condense on the outside of a cold cup. |
| 46 | melting point | The temperature at which a solid melts under specified conditions. | Pure ice melts at about 0°C at normal atmospheric pressure. |
| 47 | boiling point | The temperature at which a liquid boils at a stated pressure. | Pure water boils at about 100°C at normal atmospheric pressure. |
| 48 | heating | Transferring energy into an object because of a temperature difference. | Heating ice can cause melting rather than a continuous temperature rise. |
| 49 | cooling | A process in which an object loses thermal energy to cooler surroundings. | A warm cup of water cools as energy is transferred to its surroundings. |
| 50 | water vapour | Water in its gaseous state; it is invisible. | The visible mist above a hot drink consists of tiny droplets, not invisible water vapour. |
Explain the cold cup: Droplets outside a sealed cold cup can come from water vapour in the surrounding air. Saying that water “leaked through the cup” proposes a different process. Identify the source and the change of state before writing the explanation.
These words answer different questions. Solubility concerns how much can dissolve under given conditions. Rate of dissolving concerns how quickly it happens. Stirring may make a given amount dissolve sooner without changing the maximum amount that can dissolve at that temperature.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 51 | mixture | Two or more substances together without becoming a single pure substance. | Salt, sand and water together form a mixture. |
| 52 | solute | A substance that dissolves in a solvent. | Salt is the solute when a small amount dissolves in water. |
| 53 | solvent | A substance, often a liquid, in which a solute dissolves. | Water is the solvent in the salt solution. |
| 54 | solution | A uniform mixture formed when a solute dissolves in a solvent. | The salt solution remains a mixture even when individual salt crystals cannot be seen. |
| 55 | soluble | Able to dissolve in a particular solvent under the stated conditions. | Table salt is soluble in water. |
| 56 | insoluble | Unable to dissolve appreciably in a particular solvent under the stated conditions. | Sand is described as insoluble in water in this classroom comparison. |
| 57 | dissolve | To mix into a solvent to form a solution. | The sugar dissolves; it has not vanished from the mixture. |
| 58 | solubility | The maximum amount of solute that can dissolve in a given amount of solvent at a stated temperature. | Compare solubility only when the amount of solvent and temperature are specified. |
| 59 | suspension | A mixture containing undissolved particles dispersed through a fluid. | Muddy water can contain a suspension of soil particles. |
| 60 | rate of dissolving | How quickly a solute dissolves under specified conditions. | Measure how long equal amounts of sugar take to dissolve in two controlled trials. |
Build a complete sentence: “Sugar is the solute, water is the solvent, and the resulting mixture is a solution.” Next, change the materials. If the solid remains undissolved and can settle, a different description is needed.
Choose a separation method by looking at the substances’ properties and the material you want to collect. A filter can remove suitable undissolved particles; it does not automatically remove dissolved substances. Indicator observations also need the correct comparison chart, not a guess based on a liquid’s appearance.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 61 | filtration | Separating suitable insoluble solid particles from a fluid using a filter. | Filter paper can retain sand while salt solution passes through. |
| 62 | residue | Material left behind after a process; in filtration, the solid retained by the filter. | The sand on the filter paper is the residue. |
| 63 | filtrate | The fluid that has passed through a filter. | The filtrate may still contain dissolved salt. |
| 64 | magnetic separation | Using a magnet to remove magnetic material from a mixture. | A magnet can separate suitable iron pieces from non-magnetic plastic pieces. |
| 65 | evaporation to dryness | Removing the solvent by evaporation until the dissolved solid remains. | In a teacher-controlled demonstration, salt can remain after its water has evaporated. |
| 66 | acid | A substance that gives an acidic solution in water, below pH 7 at about 25°C. | An acidic sample turns blue litmus paper red. |
| 67 | alkali | A substance that forms an alkaline solution in water, above pH 7 at about 25°C. | An alkaline sample turns red litmus paper blue. |
| 68 | neutral | Neither acidic nor alkaline; pH 7 on the familiar classroom scale at about 25°C. | A neutral solution does not turn red litmus blue or blue litmus red. |
| 69 | indicator | A substance whose colour can help show acidity or alkalinity. | Universal indicator colours are compared with the supplied colour chart. |
| 70 | pH | A scale used to describe how acidic or alkaline a solution is. | At about 25°C, pH 3 is acidic and pH 10 is alkaline. |
Notice the word “collect”: Collecting the sand and collecting the dissolved salt are different tasks. Name the residue or filtrate precisely. Use school demonstrations, diagrams or supplied results for heating and chemical questions; there is no need to taste or mix household products.
A useful environmental explanation connects an activity, a route and an effect. For example, material on land may be carried by runoff into a drain and onward to a water body. The explanation is stronger when it states what moved and how it reached the water.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 71 | pollution | An unwanted change to the environment caused by harmful substances or other harmful inputs. | An oil spill can cause water pollution. |
| 72 | pollutant | A substance or agent that causes pollution when present in harmful amounts or circumstances. | Oil entering a waterway can act as a pollutant. |
| 73 | aquatic | Living or taking place in water. | Aquatic plants and animals may be affected by changes in water quality. |
| 74 | sewage | Used water containing human waste and other domestic waste. | Untreated sewage should not be described as clean rainwater. |
| 75 | industrial waste | Unwanted material produced by industrial activities. | A question may ask how untreated industrial waste affects a water body. |
| 76 | runoff | Water that flows over land instead of soaking into it. | Rainwater runoff can carry substances from the ground into drains. |
| 77 | fertiliser | Material added to supply nutrients for plant growth. | Excess fertiliser can be carried away by rainwater runoff. |
| 78 | pesticide | A substance used to control organisms considered pests. | A pesticide can become a water pollutant if it reaches a water body. |
| 79 | treatment | A process used to change a material or remove unwanted components. | One water-treatment stage may remove solids while other stages are still needed. |
| 80 | conservation | Careful use and protection of resources to reduce waste or damage. | Water conservation includes using only the amount needed for a task. |
Punggol practice idea: On an ordinary walk, discuss a drain or a planted area from a safe public path. Use a drawing to imagine where rainwater might travel. This is a vocabulary exercise, not evidence that a particular place is polluted.
Keep the pollutant, its possible source and its effect separate. “Smoke” is a broad description; particulate matter names suspended particles more precisely. Carbon monoxide and carbon dioxide are different substances, so their names cannot be swapped in an answer.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 81 | air quality | The condition of the air, including the amount of pollutants present. | Air quality needs measurements; a photograph alone does not give pollutant concentrations. |
| 82 | emission | A release of a substance into the surroundings. | Vehicle exhaust can be a source of emissions into the air. |
| 83 | particulate matter | Tiny solid particles or liquid droplets suspended in air. | Particles in smoke are examples of particulate matter. |
| 84 | carbon monoxide | A poisonous, colourless gas that can form during incomplete burning of carbon-containing fuels. | A passage about incomplete combustion may name carbon monoxide as a product. |
| 85 | nitrogen oxides | A family of nitrogen-and-oxygen gases, including air pollutants formed in hot combustion conditions. | Hot engine conditions can lead to the formation of nitrogen oxides. |
| 86 | sulfur dioxide | An air-polluting gas that can form when sulfur-containing materials burn. | Burning fuel that contains sulfur can release sulfur dioxide. |
| 87 | fossil fuel | Fuel formed from ancient organic material over geological time. | Coal, petroleum and natural gas are fossil fuels. |
| 88 | acid rain | Rain made more acidic by certain air pollutants and their reactions in the atmosphere. | Sulfur dioxide and nitrogen oxides can contribute to acid rain. |
| 89 | haze | Reduced visibility caused by many fine particles suspended in the air. | A distant building may appear less distinct during a haze episode. |
| 90 | Pollutant Standards Index (PSI) | Singapore's index for summarising air quality from key pollutants. | A PSI value is an index, not a mass of dust in grams. |
NEA explains the 24-hour PSI and air-quality measurements. Use the current official reading for a current question. No example in this list reports today’s conditions in Punggol. A classroom comparison should identify its date, place and measurement before drawing conclusions.
Use this group when forces appear in your school’s sequence. The words connect actions with effects: a spring stretches, a trolley speeds up, or a load changes direction. A useful description names both the force and the change, instead of saying only that “something happened”.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 91 | force | A push or pull that can change an object's motion or shape. | A push can start a stationary trolley moving. |
| 92 | friction | A contact force that opposes sliding, or attempted sliding, between surfaces. | Friction between a sliding book and the tabletop slows the book. |
| 93 | gravitational force | The attractive force between objects with mass. | Earth's gravitational force acts on a falling ball. |
| 94 | weight | The gravitational force acting on an object. | An object's weight is measured in newtons, not kilograms. |
| 95 | magnetic force | A force involving magnets or magnetic materials that can act without contact. | A magnet attracts a suitable iron object across a small gap. |
| 96 | elastic force | A restoring force from a stretched or compressed elastic object. | A stretched spring pulls towards its original shape. |
| 97 | newton | The unit used to measure force, written with the symbol N. | A spring balance can display a force of 2 N. |
| 98 | inclined plane | A sloping surface used to raise or lower a load over a distance. | A ramp provides a sloping route instead of lifting a load vertically. |
| 99 | lever | A rigid object that turns about a pivot to move a load. | A seesaw illustrates a lever turning about its central pivot. |
| 100 | pulley | A grooved wheel used with a rope or belt to transmit force. | A single fixed pulley can let a person pull down to raise a load. |
Check the machine claim: A single fixed pulley can change the direction of a pull without reducing the ideal force required. Other arrangements behave differently. Explain the arrangement in the diagram rather than assuming every machine performs the same job.
A fictional class compares two paper types. Students use fresh sheets of equal area, add the same starting volume of water, and allow the same contact time. These are supplied practice results, not measurements collected at a named school.
| Paper type | Trial 1 | Trial 2 | Trial 3 |
|---|---|---|---|
| A | 4 mL | 5 mL | 4 mL |
| B | 2 mL | 3 mL | 2 mL |
Question: Which paper absorbed more water in these trials? Identify the changed variable, two controlled variables and evidence for your conclusion.
Answer: Paper A absorbed more water in each listed trial. The changed variable was paper type. Sheet area and contact time were controlled variables. A absorbed 4–5 mL per trial, compared with 2–3 mL for B.
The useful conclusion has a boundary: “in these trials”. “Paper A is always the best” goes beyond the evidence. Perhaps another task needs a stronger paper or a different thickness. Keep the conclusion tied to the question that was actually investigated.
Repeating the test helps us see whether the pattern continues. It does not rescue an unfair comparison. If one sheet were twice as large, extra trials would repeat that difference rather than remove it. Explain why a factor is controlled: equal sheet area helps make the paper-type comparison meaningful.
Imagine a diagram showing a small amount of salt and sand mixed with enough water to dissolve all the salt. After stirring, the salt crystals are no longer visible, but sand remains. The task asks students to collect the sand and then recover the salt.
Step 1: Name what is present. Water is the solvent and dissolved salt is the solute. Together they form a salt solution. The sand remains insoluble in water. The whole container holds a mixture containing an undissolved solid and a solution.
Step 2: Choose the first separation. Filtration can retain suitable sand particles. The sand is the residue. Salt solution passes through as the filtrate. Writing “the filter removes everything” loses the distinction between an insoluble solid and a dissolved solute.
Step 3: Match the next method to the target. Evaporation to dryness can recover the dissolved salt by removing the water. Discuss this through a diagram or teacher-controlled demonstration, rather than carrying out heating at home. This method does not collect the evaporated water.
Reasoning check: Has the salt disappeared? No. It is still present in the solution. Does clear-looking filtrate prove that water is suitable to drink? No. Appearance does not establish what dissolved substances or other materials remain. Here, the diagram explicitly tells us that salt remains.
Block A and block B have equal volumes. Their masses are 60 g and 40 g respectively. Which block is denser, and which piece of information makes that comparison possible?
Answer: Block A is denser because it has more mass in the same volume. “Equal volumes” is the condition that makes the mass comparison meaningful. We can explain the relationship in words before using any formula.
Now change the question: an object has a mass of 60 g and another has a mass of 40 g, but their volumes are unknown. The masses alone do not tell us which is denser. The larger mass could be spread through a much larger volume.
Next, check the unit. A mass of 60 g is not a weight of 60 g in a scientific answer about force. Weight is a gravitational force and is expressed in newtons. Everyday shopping language sometimes uses “weight” loosely; scientific questions require the more precise term.
Finally, avoid claiming that every dense object must sink in every liquid. The surrounding medium matters. If a question supplies information about the object and liquid, use that comparison. If important information is missing, identify what else would be needed instead of inventing a result.
Consider a fictional Punggol learning walk after rain. A student sees water flowing from a planted area towards a drain. The water looks brown. The student writes: “The water contains fertiliser, so all nearby fish will die.”
First repair: separate observation from inference. Flow towards the drain and brown colour are observations. Fertiliser content has not been established by those observations. Soil particles are one possible explanation for the colour, but that also needs checking.
Second repair: use conditional language. A more careful statement is: “Runoff may carry substances from the ground into the drain. We would need further evidence to identify them.” If the question explicitly states that fertiliser entered the water, the student can then discuss that specified pollutant and its possible effects.
Third repair: avoid an unsupported absolute. The statement about all fish goes beyond the supplied evidence. A strong answer explains a relevant process and respects the information given. Words such as may, because, therefore and under these conditions help make the reasoning clear, but they must connect sensible ideas.
A family can practise this with a sketch, photograph or fictional passage. There is no need to enter drains or collect unknown water. The learning goal is to distinguish a visible change, a possible source and evidence for an explanation.
Read the instruction before choosing the sentence. If the question says state, give the requested fact directly. If it says describe, identify the relevant features or changes. If it says explain, connect the observation to an appropriate reason. Always follow the exact task and school marking guidance rather than treating a single verb as a fixed answer length.
For a comparison, name both things and use the same property. “A has more mass” is incomplete when B is never identified. “A has a mass of 60 g while B has a mass of 40 g” provides the comparison. If their volumes are equal, the next sentence can explain what that means for density.
A useful answer pattern is claim, evidence, reason. It is a practice aid, not a compulsory national examination formula. Claim: paper A absorbed more. Evidence: its recorded volumes were higher in all three trials. Reason: the comparison used the same sheet area and contact time, making paper type the intended difference.
Replace vague references when necessary. “It goes through and it stays” makes the reader guess. “The salt solution passes through the filter paper while the sand stays behind” shows which material does what. Precise nouns often improve an answer more than adding a long definition at the end.
Try these without the list, then explain each correction. They are informal practice questions, not an official test or a method for assigning a G1 grade.
- Which word names information noticed directly: observation or inference?
- What unit would fit a mass reading: g or N?
- What instrument would you choose to measure 30 mL of water?
- What change of state produces liquid droplets from water vapour?
- In salt solution, what is the water called?
- Does faster dissolving necessarily mean greater solubility?
- What is the liquid that passes through a filter called?
- At about 25°C, is pH 10 acidic, neutral or alkaline?
- Which word describes water flowing across land: runoff or residue?
- Does a single fixed pulley always reduce the ideal force needed?
Answers: 1. Observation. 2. g; N measures force. 3. A suitable measuring cylinder. 4. Condensation. 5. The solvent. 6. No; speed and maximum dissolving amount are different ideas. 7. Filtrate. 8. Alkaline. 9. Runoff. 10. No; it can change the direction of the pull.
Sort errors by their cause. A forgotten name needs recall practice. A confused pair needs two examples side by side. An incorrect explanation needs a diagram or a worked case. A correct spoken answer with unclear writing needs sentence practice. These are different next steps, even when each error receives the same mark.
Start with twenty to thirty priority terms from the school’s current topic. The aim is usable understanding, not finishing all one hundred words within fourteen days. A short session can include five to ten words, with fewer new words when an idea needs more teaching.
| Days | Task | What to check |
|---|---|---|
| 1–2 | Try the diagnostic and select current-topic words. | Which names are unfamiliar, and which meanings are confused? |
| 3–4 | Learn a small set using a sketch and one example each. | Can the student explain the word without reading it? |
| 5–6 | Use those words in short questions. | Can the student choose the correct word in a new context? |
| 7 | Review earlier words before adding more. | Which words still need a prompt? |
| 8–10 | Add the next small set and compare confusing pairs. | Can the student explain why the alternative is unsuitable? |
| 11–12 | Attempt a mixed worked example independently. | Do quantities, units and explanations agree? |
| 13–14 | Return to earlier mistakes and write a fresh answer. | Can the student correct the reasoning without copying? |
A useful word card has the term on one side and a meaning, example and contrast on the other. For filtrate, the contrast is residue. For mass, it is weight. For solubility, it is rate of dissolving. The contrast tells you where the word’s boundary lies.
When the school moves to a new topic, keep a few older words in the review. Evidence, measurement and conclusion remain useful across many topics. Let the student’s actual answers decide the next set rather than adding words only to make the notebook look fuller.
In a three-student tutorial, a tutor can give everyone the same short problem and first ask for independent answers. This makes each student’s understanding visible before a confident speaker supplies the group’s explanation.
For a filtration question, one student identifies the materials, another explains the method, and the third checks the language of residue and filtrate. Then rotate the roles with a different mixture. Each learner should practise all three jobs; roles should not become permanent labels such as “the clever one” or “the quiet one”.
The tutor can pause at a precise difficulty. If a student calls salt the solvent, return to the roles of salt and water. If the roles are understood but the sentence is unclear, work on the sentence. If the method is unsuitable, compare the properties of the materials. Extra definitions alone will not address every kind of mistake.
End the segment with a new individual question. A student who can explain the answer after group discussion may still need practice applying the idea alone. Record that difference and use it to plan the next lesson. This is an illustration of a teaching approach, not a published timetable or a promise of a particular result.
Begin with one question the student is already working on: “Which word stopped you from understanding this line?” That question is more specific than asking whether the whole chapter is understood. It also makes room for a student who knows the everyday word but not its scientific meaning.
Ask for a simple explanation, an example and a contrast. “What is a solution here? Give me an example. How is it different from a suspension?” A parent does not have to deliver a science lecture. Use the school material to check the answer, and note any uncertainty for the teacher or tutor.
Look for practical changes: the student attaches units, uses a term accurately, notices an unsupported inference, or corrects an explanation without being told the answer. These observations describe what has improved. They do not guarantee a future grade, but they help a family decide what support is still useful.
If revision feels stuck, bring a recent marked question, the current topic list and a sample of the student’s independent answer to a discussion. For broader teaching guidance, see our Secondary 1 G1 Science small-group tuition guide for Punggol. Keep the next task small enough that the student can show what changed.
Must I memorise the definitions exactly?
Learn the scientific meaning and use the terminology your teacher expects. You should also be able to explain it simply. Copying a sentence accurately is useful only if you understand when it applies.
Are longer scientific words automatically better?
No. Choose the word that answers the question accurately. “The sand remains as residue” is clearer than a long sentence that confuses the solid with the solution.
Can I use everyday English in my explanation?
Yes, when it communicates the science precisely. Keep essential terms such as solvent, density and weight accurate. Short sentences with clear cause-and-effect links can explain a difficult idea well.
What if my school is teaching a different topic?
Follow the school’s sequence and use the relevant groups here as support. Add terms from the current lesson. No single list replaces the textbook, teacher’s explanations or the full learning programme.
What should I do after learning a group of ten?
Close the list, explain several terms, and answer one unfamiliar question. Then revisit a confusing pair. The next step is to use the vocabulary to reason, measure, describe and make a supported decision.
Curriculum references checked on 16 November 2026. The definitions, examples, practice data and learning routine above are original eduKate teaching material. Use the latest school instructions for current classroom work.
