This Top 100 Secondary 1 G1 Vocabulary List for Punggol helps students read Mathematics questions, recognise important terms and explain their working. The 100 entries cover numbers, fractions, ratio, percentage, early algebra, angles, symmetry, measurement and data. Each comes with a short meaning and an original example. Start with the words in your current school topic, then use the worked problems to check whether you can turn the language into the right calculation.
For parents considering Secondary 1 G1 Mathematics small groups tuition, the useful question is whether a student understands what the question asks before choosing a method. A student may calculate accurately yet confuse increase with final amount, or area with perimeter. This eduKate teaching selection makes those gaps easier to discuss. It is a curated learning list, not an official MOE or SEAB list, a ranking of words by importance, or a promise that learning 100 definitions will produce a particular grade.
- Who it is for: Secondary 1 students studying Mathematics at G1, with parents supporting revision at home.
- What you get: 100 different mathematical words and short terms, arranged in ten groups of ten.
- How to begin: Choose ten terms from the current school topic; explain, draw and use each one.
- What to check: The question instruction, the quantity being found, signs, units and required accuracy.
- Curriculum boundary: Follow the school’s current topic sequence and assessment instructions; this is a learning aid.
- Tuition focus: A three-student lesson can make room for individual explanations, guided practice and correction.
Contents
Understand the guide · Chapters 1–1
Find the 100 words · Chapters 2–11
Work through examples · Chapters 12–13
Check and practise · Chapters 14–15
Help and next steps · Chapters 16–18
G1 is a subject level, not a label for a whole student. Subjects may be taken at different levels under Full Subject-Based Banding. Follow school advice on subject levels; see the official school explanation.
The MOE G1 Mathematics syllabus includes a Secondary One content table. Its number work includes negative values, fractions, decimals, estimation and numerical comparison; ratio, percentage and early algebra also appear. Prime numbers are included, while prime factorisation is excluded. This vocabulary guide selects language useful for those ideas and related geometry, measurement and data learning. It also revisits familiar Primary Mathematics words that support the transition.
Use the groups that match the school’s current teaching. Geometry, measurement and data terms are included as a useful reference alongside the number and algebra vocabulary. A school may teach or revisit these ideas in a different order. Ask for the current topic list before choosing a revision sequence.
The SEAB 2027 G1 Mathematics syllabus, K110 describes a later SEC endpoint, with content beyond Secondary 1. Secondary 1 school assessments are not that national examination; follow information for your own cohort.
Use the tables as a working reference rather than a spelling race. Knowing a word means being able to explain it, recognise an example and use it correctly in a problem. Some terms are familiar from primary school; others need repeated encounters. Neither situation says anything fixed about a student’s ability.
Begin with the words that tell you what kind of number you are handling and where it belongs. Say negative signs aloud while practising. A student who reads −8 as eight has already changed the question before the first calculation. Use a number line whenever the order feels uncertain.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 1 | integer | A whole-number value that may be negative, zero or positive. | −4, 0 and 9 are integers; 2.5 is not an integer. |
| 2 | negative | Less than zero; written with a minus sign before the number. | A temperature of −3°C is below zero degrees Celsius. |
| 3 | positive | Greater than zero; a plus sign may be written or left out. | Both +7 and 7 represent the same positive number. |
| 4 | zero | The number separating positive and negative values; neither positive nor negative. | An account with no credit or debt has a balance of $0. |
| 5 | prime | A whole number greater than one with exactly two positive factors. | Seven is prime because its only positive factors are 1 and 7. |
| 6 | factor | A whole number that divides another whole number exactly. | Three is a factor of 18 because 18 ÷ 3 = 6. |
| 7 | multiple | A number obtained by multiplying another number by a whole number. | Twenty-four is a multiple of 6 because 6 × 4 = 24. |
| 8 | ascending | Arranged from the smallest value to the largest value. | The numbers −5, −1, 0 and 4 are in ascending order. |
| 9 | descending | Arranged from the largest value to the smallest value. | Write 8, 3, −2 and −6 in descending order. |
| 10 | number line | A straight line on which positions represent numerical values. | On a number line, −2 lies to the right of −5. |
These terms help you translate instructions into calculations. Keep the operation attached to its numbers: the difference between two quantities is not their product. When practising with a calculator, predict the sign and approximate size first. A sensible prediction can help you notice a missed bracket or an incorrect entry.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 11 | sum | The result of adding two or more numbers. | The sum of −3 and 8 is 5. |
| 12 | difference | The result of subtraction; for a gap between quantities, identify the larger value. | The difference between 14 and 9 is 5. |
| 13 | product | The result of multiplying two or more numbers. | The product of −4 and 6 is −24. |
| 14 | quotient | The result of dividing one number by another non-zero number. | The quotient of 35 divided by 5 is 7. |
| 15 | operation | An action performed on numbers, such as addition or division. | In 6 + 2 × 3, multiplication is performed before addition. |
| 16 | square | The result of multiplying a number by itself. | The square of 5 is 25, written as 5² = 25. |
| 17 | cube | The product of three equal factors, each equal to the number. | The cube of 2 is 8 because 2 × 2 × 2 = 8. |
| 18 | square root | A number that gives the original value when squared; √ denotes the non-negative root. | The square root written √49 is 7, because 7² = 49. |
| 19 | cube root | A number that gives the original value when cubed. | The cube root of −27 is −3 because (−3)³ = −27. |
| 20 | brackets | Symbols grouping quantities so that the grouped calculation is handled together. | In 4 × (6 − 2), calculate the bracketed difference first. |
A fraction is a relationship between numbers, not two unrelated digits. Attach numerator and denominator to a drawing or an actual division. If you can show why three quarters is less than one, the symbols become easier to control when negative values and mixed calculations appear in the same question.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 21 | fraction | A number expressed as one quantity divided by another non-zero quantity. | Three quarters is written 3/4 and equals 3 ÷ 4. |
| 22 | numerator | The number above the fraction line, indicating how many fractional parts are counted. | In 5/8, the numerator is 5. |
| 23 | denominator | The number below the fraction line; in a part-whole model it sets equal-part size. | In 5/8, the denominator 8 means the whole is split into eighths. |
| 24 | equivalent | Equal in value although written in a different form. | The fractions 2/3 and 4/6 are equivalent. |
| 25 | proper fraction | For positive fractions, a fraction with numerator smaller than denominator. | Three fifths is a proper fraction and is less than one. |
| 26 | improper fraction | For positive fractions, a fraction with numerator at least as large as denominator. | Seven fourths is an improper fraction because 7 is greater than 4. |
| 27 | mixed number | A whole number and a proper fraction written together as one value. | One and three quarters, written 1 3/4, equals 7/4. |
| 28 | decimal | A number written using place values including tenths, hundredths or smaller parts. | The decimal 0.75 represents seventy-five hundredths. |
| 29 | place value | The value a digit has because of its position in a number. | In 6.28, the digit 2 represents two tenths. |
| 30 | reciprocal | The number that multiplies with a non-zero number to give one. | The reciprocal of 3/5 is 5/3; their product is 1. |
Read the accuracy instruction before deciding what to write on the final line. Decimal places count positions after the decimal point; significant figures start from the first non-zero digit. Keep extra digits during intermediate calculations, then apply the accuracy requested by the actual task. Approximation is purposeful, not careless guessing.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 31 | approximate | Close to a value, without necessarily being exactly equal to it. | The fraction 1/3 is approximately 0.33 to two decimal places. |
| 32 | estimate | Find a sensible approximate value using simplified numbers or known information. | Estimate 19.8 × 5.1 by calculating 20 × 5 = 100. |
| 33 | round | Replace a number with a nearby value at a stated accuracy. | Round 7.46 to one decimal place to obtain 7.5. |
| 34 | decimal place | A position to the right of the decimal point. | The number 3.27 has two decimal places. |
| 35 | significant figure | A digit counted from the first non-zero digit when stating numerical precision. | The value 0.00468 rounds to 0.0047 to two significant figures. |
| 36 | exact | Precisely equal to the intended value, without rounding. | For 1 ÷ 4, both 1/4 and 0.25 are exact answers. |
| 37 | greater than | Larger in numerical value; represented by the symbol >. | Since −2 is greater than −7, write −2 > −7. |
| 38 | less than | Smaller in numerical value; represented by the symbol <. | Write 0.4 < 0.7 because four tenths is smaller than seven tenths. |
| 39 | at least | Not less than a stated value; the boundary value is included. | At least 12 means 12 or more, represented by x ≥ 12. |
| 40 | at most | Not more than a stated value; the boundary value is included. | At most 20 means 20 or fewer, represented by x ≤ 20. |
Name the quantities before writing their ratio. Red:blue and blue:red describe the same collection in different orders, so their numbers must switch too. For percentage questions, identify the quantity treated as 100%. That reference amount determines the denominator and prevents many otherwise confident calculations from answering the wrong question.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 41 | ratio | An ordered comparison of two or more quantities using division. | For 6 red and 9 blue beads, red:blue = 6:9 = 2:3. |
| 42 | quantity | An amount that can be counted or measured. | The quantity of water in a bottle may be measured in millilitres. |
| 43 | unit | A standard amount used to state a measurement. | In 250 cm, centimetres are the units of length. |
| 44 | simplest form | A fraction or ratio reduced so its whole-number terms have no common factor greater than 1. | The ratio 18:24 has simplest form 3:4. |
| 45 | share | One amount received when a total is divided according to a rule. | Sharing $30 in the ratio 2:3 gives shares of $12 and $18. |
| 46 | part | A portion of an identified whole or total. | If 8 of 20 students walk, the walking group is one part of the class. |
| 47 | whole | The complete amount selected as the reference total. | If $12 represents 25% of the whole amount, the whole is $48. |
| 48 | percentage | An amount expressed per hundred of a reference quantity. | Fifteen out of sixty is 25%, because 15/60 × 100% = 25%. |
| 49 | increase | A change that makes a quantity larger. | Increasing 40 by 10% adds 4, giving 44. |
| 50 | decrease | A change that makes a quantity smaller. | Decreasing 80 by 25% subtracts 20, giving 60. |
Letters allow one mathematical sentence to describe several possible situations. In early algebra, concentrate on what each letter represents and how the notation is read. In 4p, the missing multiplication sign is understood; the expression does not mean forty-something. Substitution then connects the general statement to a particular numerical case.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 51 | expression | A mathematical combination of numbers, letters and operations, without an equality statement. | The expression 3x + 2 represents three times x, then add two. |
| 52 | variable | A letter or symbol representing a quantity whose value can vary. | If n is the number of notebooks, different purchases give different n values. |
| 53 | coefficient | The numerical factor multiplying a variable in a term. | In 7a, the coefficient of a is 7. |
| 54 | constant | A value that remains fixed in the situation or expression considered. | In 5x + 8, the constant term is 8. |
| 55 | term | One part of an expression separated by addition or subtraction, with its sign. | The terms in 4x − 3 are 4x and −3. |
| 56 | substitute | Replace a letter or quantity with its stated value. | Substitute x = 6 into 2x + 1 to obtain 2(6) + 1. |
| 57 | evaluate | Calculate the numerical value of an expression. | When x = 6, evaluating 2x + 1 gives 13. |
| 58 | formula | A mathematical statement showing a relationship between quantities. | For a rectangle, the formula A = lw connects area, length and width. |
| 59 | sequence | An ordered list of numbers or objects following a stated pattern or rule. | The sequence 3, 5, 7, 9 increases by two each time. |
| 60 | nth term | A rule giving the term at position n in a sequence. | For the rule 2n + 1, the fifth term is 2(5) + 1 = 11. |
Read an angle diagram through its markings and stated conditions. A drawing that looks nearly square does not establish a right angle. For parallel-line questions, identify the two parallel lines and the line crossing them before naming an angle relationship. Rotate the page mentally if the familiar pattern appears in an unfamiliar position.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 61 | angle | The amount of turn between two rays meeting at a common endpoint. | A quarter-turn measures 90 degrees. |
| 62 | acute | Describes an angle greater than 0° and smaller than 90°. | An angle of 38° is acute. |
| 63 | obtuse | Describes an angle greater than 90° and smaller than 180°. | An angle of 124° is obtuse. |
| 64 | right angle | An angle measuring exactly 90°. | Two perpendicular edges of a rectangular card form a right angle. |
| 65 | reflex | Describes an angle greater than 180° and smaller than 360°. | An angle of 245° is reflex. |
| 66 | straight angle | An angle measuring 180°, making a straight turn. | Two adjacent angles of 65° and 115° together form a straight angle. |
| 67 | vertically opposite angles | The opposite pair of angles formed when two straight lines intersect. | If one angle is 48°, its vertically opposite angle is also 48°. |
| 68 | parallel | Describes straight lines in one plane that never meet when extended. | The two opposite long edges of a rectangle lie on parallel lines. |
| 69 | corresponding angles | Angles in matching positions where a transversal crosses two lines. | When the two lines are parallel, corresponding angles are equal. |
| 70 | alternate angles | Angles between two lines, on opposite sides of their transversal. | When the two lines are parallel, these alternate interior angles are equal. |
A shape name carries conditions. A rectangle has right angles even when it is tilted; a line of symmetry must create matching halves. Use tracing paper, folding or a simple sketch to check a claim before learning a sentence about it. The physical action should explain the mathematical word, not replace its definition.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 71 | perpendicular | Describes lines that meet at a right angle. | A vertical line and a horizontal line are perpendicular. |
| 72 | transversal | A line that crosses two or more other lines at distinct points. | A slanting line crossing two parallel lines acts as a transversal. |
| 73 | interior angles | Angles lying inside a shape or between two lines, depending on context. | Same-side interior angles between parallel lines add to 180°. |
| 74 | line symmetry | A property in which reflection across a line leaves a shape unchanged. | A non-square rectangle has line symmetry across its two central axes. |
| 75 | line of symmetry | A line dividing a figure into halves that match by reflection. | A square has four lines of symmetry. |
| 76 | rotational symmetry | A property in which a non-zero turn smaller than 360° leaves a shape looking unchanged. | A non-square rectangle matches itself after a 180° turn. |
| 77 | order of rotational symmetry | The number of matching positions during one full 360° turn. | A square has rotational symmetry of order 4. |
| 78 | triangle | A polygon with three straight sides and three vertices. | A triangular sign has three sides, even when drawn upside down. |
| 79 | quadrilateral | A polygon with four straight sides. | Squares, rectangles and trapeziums are all quadrilaterals. |
| 80 | rectangle | A quadrilateral with four right angles. | A rectangle measuring 8 cm by 3 cm has opposite sides equal. |
Decide whether the question concerns a boundary, a covering or an amount of space. Those three pictures lead to perimeter, area and volume. Keep units visible throughout your working. When changing centimetres into metres, a length, an area and a volume need different conversion factors because they measure different kinds of quantities.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 81 | perimeter | The total distance around the outside boundary of a plane figure. | A 7 cm by 4 cm rectangle has perimeter 2(7 + 4) = 22 cm. |
| 82 | area | The amount of two-dimensional surface covered, measured in square units. | A 7 cm by 4 cm rectangle has area 7 × 4 = 28 cm². |
| 83 | circumference | The distance around the boundary of a circle. | A circle of radius 3 cm has circumference 2π(3) = 6π cm. |
| 84 | radius | A line segment, or its length, from a circle's centre to its boundary. | A circle with diameter 10 cm has radius 5 cm. |
| 85 | diameter | A line segment across a circle through its centre, or that segment's length. | A circle of radius 4 cm has diameter 8 cm. |
| 86 | base | The side or face selected as a reference for a measurement or formula. | For a triangle's area, choose a base and its matching perpendicular height. |
| 87 | perpendicular height | The distance measured at a right angle from a base to the opposite point or side. | A triangle with base 8 cm and height 5 cm has area 20 cm². |
| 88 | volume | The amount of three-dimensional space occupied, measured in cubic units. | A cuboid measuring 5 cm by 3 cm by 2 cm has volume 30 cm³. |
| 89 | surface area | The total area of the outside faces or surfaces of a solid. | A cube of side 2 cm has surface area 6 × 2² = 24 cm². |
| 90 | cuboid | A solid bounded by six rectangular faces. | A rectangular storage box can be modelled as a cuboid. |
A graph is a set of information presented through a chosen design. Before comparing bars or symbols, read the title, labels, units and scale. A large-looking picture may represent fewer items than you expect. Your interpretation should say exactly which group, quantity and period the display describes.
| No. | Term | Meaning | Example |
|---|---|---|---|
| 91 | data | Values or observations collected for a purpose. | The travel methods reported by 20 students form a set of data. |
| 92 | frequency | The number of times a value or category occurs. | If seven students choose walking, that category has frequency 7. |
| 93 | table | Information organised into rows and columns with labels. | A table can show each travel method beside its number of students. |
| 94 | category | A group used to classify information. | Walking, cycling and taking a bus are different travel categories. |
| 95 | bar graph | A display using separate bars whose lengths represent quantities. | A bar reaching 12 on the frequency scale represents 12 students. |
| 96 | pictogram | A display using pictures or symbols to represent quantities. | A row of three bicycle symbols represents 6 bicycles if each symbol means 2. |
| 97 | key | An explanation of the meaning or value of a symbol in a display. | A pictogram key may state that one star represents four votes. |
| 98 | line graph | A display joining plotted values in order to show how a quantity changes. | A line graph can show the temperature recorded at successive hours. |
| 99 | pie chart | A circle divided into sectors representing parts of one whole. | A sector of 90° represents one quarter of the total. |
| 100 | interpret | Explain what mathematical information means in its given context. | Interpret a frequency of 9 as nine surveyed students, not nine bus trips. |
All situations and prices below are invented for practice. They are not current shop prices, school charges or transport information. Read the wording before touching a calculator, and write the quantity you intend to find.
Example 1: a ratio is an ordered comparison
A Punggol study group prepares 35 practice cards. The ratio of number cards to shape cards is 3:4. How many shape cards are there?
The total has 3 + 4 = 7 equal ratio parts. One part represents 35 ÷ 7 = 5 cards. Shape cards occupy four parts, so there are 4 × 5 = 20 shape cards. The other 15 cards are number cards. Checking 15:20 gives 3:4, and 15 + 20 returns the stated total.
The language error to avoid is treating the 4 as four cards, or using 4/3 of the total. The denominator for a share of the whole is seven parts. Before calculating, say “shape cards are four of the seven equal parts”. That sentence describes the operation accurately.
Example 2: increasing by an amount and increasing to an amount
A hypothetical activity budget is $80. It increases by 15%. Find the increase and the new budget.
The original $80 is the reference whole. The increase is 15/100 × $80 = $12. The new budget is $80 + $12 = $92. A single calculation, 1.15 × $80, also gives $92, but the two-step method makes the meanings visible.
“Increases by 15%” adds fifteen per cent of the original amount. “Increases to $92” states the final amount. The words by and to do different jobs. If a later question says the $92 budget decreases by 15%, the decrease is $13.80 and the final amount is $78.20. The reference whole has changed; equal percentage changes do not automatically undo each other.
Example 3: substitute without changing the notation
A practice model gives the cost C dollars of n identical notebooks as C = 3n + 2. The extra $2 is a fixed charge. Find C when n = 4.
Substitute 4 for n: C = 3(4) + 2 = 12 + 2 = 14. The cost is $14. The coefficient 3 represents three dollars per notebook; the constant 2 represents the fixed charge. The expression 3n + 2 describes how to calculate the cost.
Writing 34 + 2 would confuse multiplication with placing digits together. Writing 3(4 + 2) would multiply the fixed 2 by 3 as well, changing the formula. Check by explaining the situation: four notebooks cost $12, then one fixed $2 charge is added.
Example 4: boundary, covering and space
A rectangular display board measures 120 cm by 80 cm. Find the length of edging around it and the area of paper needed to cover its front.
Edging follows the boundary, so use perimeter: 2(120 + 80) = 400 cm, or 4 m. Paper covers the front, so use area: 120 × 80 = 9,600 cm². For an optional extension, if square-unit conversion has been introduced, convert the dimensions first: 1.2 m × 0.8 m = 0.96 m². Otherwise, the answer 9,600 cm² completes the area calculation.
In that extension, one square metre contains 100 × 100 = 10,000 square centimetres. Therefore dividing 9,600 by 100 would be the wrong area conversion. Compare the two methods: converting dimensions first and converting the completed area must produce the same result. No volume is required because the problem asks about a flat front surface.
Example 5: a pictogram key changes the answer
In a fictional survey display, one book symbol represents four students. A reading category shows three full book symbols and one half symbol. How many students does it represent?
The key defines the value. Three full symbols represent 3 × 4 = 12 students, and half a symbol represents 2 students. The frequency is 14 students. The half symbol does not mean half a student; it means half the value assigned to a full symbol.
Finish with a sentence naming the quantity: “Fourteen surveyed students chose that reading category.” Do not change it into fourteen books borrowed unless that is what the display measures. Interpretation keeps the calculation connected to the original data.
Factor and multiple
Ask two different questions: “What divides 18 exactly?” and “What can I obtain by multiplying 18?” Three is a factor of 18; 54 is a multiple of 18. A factor question looks inward at divisors, while a multiples question follows repeated groups. Draw equal groups when the language feels slippery.
Numerator and denominator
In a part-whole picture of 3/5, the denominator fixes five equal parts in the whole, and the numerator counts three of them. Increasing the denominator while keeping numerator one makes each share smaller: one eighth is smaller than one quarter of the same whole. The same-whole condition matters.
Decimal places and significant figures
For 0.04736, two decimal places gives 0.05, while two significant figures gives 0.047. Point to the requested last digit before rounding. The different answers are not a contradiction: the instructions demand different precision. Avoid a memorised rule that says “keep two digits” without saying which digits.
Expression and formula
The expression 4n + 1 has a value once n is known. A formula such as P = 4s states a relationship between quantities. Read the equality sign as a relationship, not as a signal to start calculating anything available. Ask what each letter stands for and which value the question requests.
Surface area and volume
Surface area concerns covering the outside; volume concerns occupied space. For a cuboid 5 cm by 3 cm by 2 cm, the surface area is 2(15 + 10 + 6) = 62 cm², while the volume is 30 cm³. Units reveal which kind of measurement the answer represents.
Appearance and stated conditions
Corresponding and alternate angle equalities require parallel lines. A pair of lines that merely looks parallel in a sketch is insufficient unless the problem states or marks the condition, or you have established it. Write the reason with the angle relationship so your explanation remains valid when the drawing is rotated.
Try these without looking back at the tables. The purpose is to locate one teachable gap, not to award yourself a label. If you know the method but misread a word, record the wording that caused the difficulty.
- Arrange −3, 2, −7 and 0 in ascending order.
- State the numerator and denominator of 7/9.
- Find the product of −6 and 4.
- Round 5.286 to two decimal places.
- Round 0.00642 to two significant figures.
- Share 48 counters in the ratio 5:3. Find the smaller share.
- Decrease $60 by 20%. State the decrease and the final amount.
- Evaluate 4a + 3 when a = 5.
- Find the perimeter and area of a rectangle 9 cm by 4 cm.
- A pictogram key assigns 6 votes to one symbol. What do two and a half symbols represent?
Answers and the language to check
- −7, −3, 0, 2. Ascending starts with the smallest numerical value.
- Numerator 7; denominator 9. Nine sets the fractional part size in a part-whole model.
- −24. Product means multiplication.
- 5.29. Keep two positions after the decimal point and inspect the next digit.
- 0.0064. The significant digits begin at 6; the next digit after 4 is 2.
- 18 counters. Eight ratio parts give six counters each; the smaller share has three parts.
- Decrease $12; final amount $48. The percentage change and resulting total are different answers.
- 23. Substitute 5 for a, then calculate 4 × 5 + 3.
- 26 cm and 36 cm². Boundary and covering require different calculations and units.
- 15 votes. Two and a half groups of six equal fifteen.
Sort errors into three columns: word meaning, mathematical method and calculation or copying. A wrong ratio answer caused by reversing the named quantities needs a different correction from a correct setup followed by 48 ÷ 8 = 7. Record the actual cause, then try one fresh example with different numbers.
Select ten words connected to this week’s lesson. You do not need to begin with entry 1. A student revising circles can start with radius, diameter and circumference, then add related measurement and instruction words. Put unfamiliar words beside a sketch or a short calculation rather than copying a paragraph repeatedly.
First encounter: recognise and explain
Read each term, cover the meaning and explain it in your own words. Compare the explanation with the table. Draw one example where possible: a number line, divided bar, angle or labelled rectangle. Write one example that does not fit the word as well. Twelve is not prime because it has more than two positive factors.
Next session: use the word in a task
Choose four short questions using the same terms. Underline the instruction and circle the quantity to find. Speak the intended method before calculating: “I need the share with three ratio parts.” If the sentence is unclear, pause there. Clarifying the decision is more useful than completing a page with the wrong method.
Later in the week: retrieve and compare
Mix the ten words instead of following their table order. Explain one confusing pair, complete a new problem and check its units. Keep a simple record: can explain, can use with help, can use independently. These are working observations, not permanent categories. Move a word back into practice when a new context exposes uncertainty.
Second week: combine old and new
Add another ten words from the school topic while retaining a few questions from the first set. A mixed task might combine ratio, a whole amount and an area calculation. Ask what changed between the two tasks. This prevents familiarity with one worksheet layout from being mistaken for understanding the underlying words.
Ten words per week is a possible starting pace, not a national requirement or a fixed target for every learner. Reduce the number when explanations remain fragile; increase it when the student can apply terms comfortably. The important record is successful use in fresh questions.
Begin with one recent question your child found confusing. Ask, “What does this sentence ask us to find?” and “Which quantity is the whole?” Give time for an answer. If the student struggles to explain, offer two specific choices, such as boundary or covering, and ask them to justify the choice from the question.
Separate language support from taking over the solution. You can explain what ascending means without arranging all the numbers for the student. You can point to the word by without calculating the percentage increase. The next move should still belong to the learner, so you can see what they now understand.
When the same error returns, compare the attempts calmly. Perhaps the definition is remembered but the diagram is different; perhaps the task contains two stages; perhaps a unit change was missed. “You knew this yesterday” does not identify which part changed. “Show me where you decided to divide” often reveals the exact point that needs attention.
An illustrative three-student lesson
A tutor could begin with a ratio problem and ask each of the three students to explain the named quantities independently. One student may reverse the order, another may confuse a ratio part with an actual item, and another may calculate correctly but omit the final label. The shared topic can therefore produce three different corrections.
After a short explanation, each student solves a new question individually. They then compare the reasoning, not just the final number. A student who answers quickly can explain why a tempting wrong method fails; a student rebuilding confidence can work with a diagram before moving to symbols. The group remains focused on the same mathematical relationship.
A useful closing check uses different numbers or a different context. The tutor records whether each learner can name the relevant quantity, choose the operation and check the answer. This describes a possible teaching design, not a promise about a particular class session or available timetable.
For a consultation, bring the school’s current topic list, one recent marked paper and two pieces of ordinary homework. Ask which vocabulary gaps are being addressed and how independent use will be checked. Further context is available in our Secondary 1 G1 Mathematics small groups tuition guide for Punggol. Specific arrangements should be confirmed directly.
Do I need to memorise all 100 definitions exactly?
No. You need accurate meaning and correct use. A shorter explanation in your own words is helpful if it preserves the essential conditions. For example, prime needs greater than one and exactly two positive factors; leaving out those conditions can make the definition wrong.
What if English vocabulary is the difficulty?
Pair the English term with a clear example, diagram and spoken explanation. A familiar home language can help establish the idea, then practise connecting that meaning back to the wording used in the Mathematics lesson. Keep the mathematical condition intact rather than memorising a loose translation.
Should I study later SEC topics immediately?
Build the current foundations first and follow the school’s sequence. Recognising a term in an examination syllabus does not mean it belongs in this week’s Secondary 1 revision. A useful next step is one slightly changed problem using knowledge you can already explain.
How do we know vocabulary practice is helping?
Look for clearer restatements of questions, fewer reversals of quantities, appropriate units and explanations that survive a changed example. A student who can say why perimeter is needed before calculating has shown something more useful than simply remembering the word on a flashcard.
Policy and curriculum references were checked on 16 November 2026. The 100-entry selection, definitions, examples, practice questions and teaching suggestions are original eduKate learning material. Consult the school’s latest notices for its current teaching sequence and assessment requirements.
