Small Group Tutorials

Here to help students catch up, keep up, and move ahead. Book a consultation here.

Understanding Punggol PSLE Posting Guide PG1 | Secondary 1 Design and Technology Syllabus and Practice

Secondary 1 Design and Technology in Punggol helps students notice an everyday problem, imagine different ways to solve it, and find out how well their idea works. D&T is a lower-secondary common curriculum subject under Full Subject-Based Banding. A student who enters through PSLE Posting Group 1 learns in that shared part of the curriculum even if some other subjects are at different levels.

Ask your child to tell you who they are designing for and show you the change they made after their first test. Those two details often reveal more than a finished model. The activities below let families practise with ordinary paper and card. For an actual school project, use the teacher’s brief, submission instructions and workshop rules.

  • Check the class instructions for the topic, materials and submission. The school sets the teaching sequence and classroom task.
  • Start with where and when a difficulty occurs. Write down what the person is trying to do before naming a product.
  • Draw two or three ideas that work differently. Label the parts a user would touch and the parts that need to fit or move.
  • Make a small model to investigate one question. Keep the first test conditions consistent when comparing designs.
  • Record a result that another person could understand and make one change you can explain.
  • Lower-secondary D&T is the common subject. The SEC D&T syllabus applies later to registered candidates at the relevant level and examination year.

On this page
What D&T is in the Secondary 1 timetable · Find a need by watching someone use an object · Sketch ideas that can tell the user apart · Build a small model for a question · Complete a paper prototype from observation to improvement · Make your portfolio show how you decided · Learn from a model that partly works · Plan a manageable first term with your child · Understand the later D&T choice and SEC listings

What D&T is in the Secondary 1 timetable

When a child brings home a timetable, PG1 and D&T answer different questions. PG1 describes the route by which the child was admitted. Within Full Subject-Based Banding, subjects such as Mathematics or English can have an individual starting level. Lower-secondary D&T sits among the common curriculum subjects that students take in their mixed form-class experience. Your child may collaborate with peers who study other subjects at G1, G2 or G3. Secondary school experience under Full Subject-Based Banding

The lower-secondary Design and Technology curriculum describes learning through design-and-make projects. Its introductory pages use older course names. Read today’s Full Subject-Based Banding information for the current grouping of students and the lower-secondary curriculum for the design skills the subject develops. The two documents address different parts of the classroom experience.

The curriculum connects three kinds of work. Students investigate a genuine situation and make sense of the need. They explore ideas with sketches or quick physical models. They make and evaluate a response with the intended user in mind. The stages can overlap. A test may reveal that a sketch missed an important dimension or that the initial description of the user’s problem needs changing. A student can go back to the sketch and use that new evidence to improve it.

A family does not need to prepare a workshop at home. School lessons can introduce processes and materials under appropriate supervision. At home, folded paper, previously cut scrap card and removable tape are plenty for the practice in this guide. A pupil can test shape, position, scale, fit and readability without reconstructing a class assignment. If the school asks for a particular material or method, follow its instructions. Use paper symbols or very light objects for a home model.

Read the brief before discussing the object

A brief might ask students to design something that makes it easier to identify an item in a shared classroom space. Another may ask them to address an inconvenience a user experiences when moving between activities. A teacher may give a size limit, specified materials, particular design skills to show or a required set of drawings. Read those constraints aloud if your child is eager to start making. The few minutes spent understanding a constraint can save an evening spent taking a model apart.

Ask the child what the teacher expects at the next checkpoint. On one Friday, the answer might be two annotated sketches, each based on an observed need. A week later, the class might be checking whether one chosen idea fits within a measured space. At each checkpoint, prepare the evidence for that stage. A smooth finished surface contributes little when the task asks the student to show two distinct approaches or explain a proposed test. Obtain the current checklist or rubric from the class.

At home, an adult can help the child find a described measurement or ask a question about the user’s actions. Give the child room to make their own judgement and record what happened. A parent who measures, cuts and fixes everything may remove the exact decisions the teacher wants to see. Use a helpful prompt such as “Which part here is harder than you expected?” Then let the student name the issue and choose what to try.

Find a need by watching someone use an object

Imagine a family returns from a library visit in Punggol with two borrowed books, a reusable shopping bag and a folded library slip. The slip moves between a bag pocket, a kitchen table and a pile of papers. Before the next trip, one person spends time looking for it. A child might immediately suggest a slip holder. Put the suggestion on a separate line and spend five minutes learning how the family currently uses the slip. You may discover that the inconvenience begins earlier than the search.

The user is a person carrying out an activity, and their difficulty occurs under particular conditions. Ask when the slip is used and where it normally goes first. Ask whether it needs to remain with the books or whether knowing the due date is the real concern. Notice whether more than one person returns the books. A useful solution for a child who always uses one bag may work poorly in a family that shares the return task and changes bags between visits.

Take brief notes with consent and keep another person’s personal information out of work you share. “On two simulated searches we placed the slip among three sheets. The second user found it only after lifting the other papers” is specific. “My family is always messy” tells you very little about the design situation. Record what you directly saw. A statement about why it happened should follow as a possibility you can check.

Here is a second example. A pupil’s water bottle stands beside the timetable on a study desk at home. Every time the pupil goes to check the next lesson, they shift the bottle and turn the timetable toward the light. The issue might be visibility from a seated position or the way the desk is arranged. If you decide the problem is “needs a bottle holder”, you may invent an object that fixes the wrong step. Ask the pupil to point out the piece of information they need and show which hand they normally use. A different timetable position might solve more of the problem.

Write a need you can recognise in a test

A design statement can name the user, their activity and what would improve. For the first example, try “A family member preparing to return library books needs to locate the paper slip quickly among the items going into the bag.” The sentence gives you a situation to recreate. Later you can ask another family member to locate a pretend slip placed with two sample books and a bag. Use a fictional slip without identification details.

Now add two or three criteria. “A family member can see a corner or label on the slip without emptying the bag” identifies an outcome. “The paper remains easy to remove with one hand” identifies another. “The model uses one folded piece of card and removable tape” could be a practice constraint. If the assignment already gives requirements, put those first. Add a criterion only if it helps explain what the design needs to do.

Be careful with words such as nice, easy and strong. They can express a preference, but a useful test needs to say what someone would see or do. Replace “easy to read” with “the user can point to the due-date box from their normal seat under usual room lighting.” Replace “strong enough” with “the model remains standing when a paper example is placed on it for ten seconds.” These first checks are deliberately small. A home card model can reveal a design principle without establishing what would happen with other materials or real loads.

Worked practice with a misplaced homework reminder

A fictional student brings three paper reminders from school. During packing, one reminder disappears between two exercise books. The student notices it when unpacking the next afternoon. Two adults are often home, and neither knows whether the student already packed the paper. An initial answer says, “Make a better folder.” A revised answer can begin with “A student packing at a busy desk needs to tell whether each required reminder has already been put in the bag.”

Why is the revision useful? It keeps the pupil at the centre and explains where uncertainty occurs. The first version names an object. The second leaves room for a small tray, a checklist, a visible divider or a different position for papers. A queue of three papers and two pretend books is enough to test whether a design gives the child the needed information. Ask the student to explain which evidence would show that there was less confusion. An answer might be “The student correctly identifies which two of three sample reminders are in the bag, using the visible markings without removing the books.”

Try changing one part of the situation. The student takes different books to two classrooms, so the papers must be separated by lesson. The usable design criteria may change from a simple packed-or-unpacked indicator to showing which lesson each item belongs to. That small change in the brief can produce different versions of a solution. A teacher will find it easier to follow your reasoning when each design choice links to a real change in the situation.

Sketch ideas that can tell the user apart

Many learners assume a D&T sketch has to look like a polished illustration. A design sketch can be rough when its purpose is to explore possibilities. What matters is that a reader can see how the idea works. Establish an outline, show the part the hand touches, then use arrows or short labels to describe movement, fit or placement. Draw another view if one part is hidden. A small sketch with useful labels is often better evidence of thinking than a decorated image with no explanation.

Take the pretend reminder problem. One sketch might show a card divider with three raised tabs. Each tab corresponds to one lesson. Another might show a desk strip with two sections marked “to pack” and “packed”, using folded tabs to keep papers from sliding. A third might show a folded pocket with a cutaway corner represented by a shorter pre-cut piece of card, leaving a sample label visible. These ideas differ in where they operate and what the user must do. Three colour versions of the same divider would explore appearance while leaving the main action unchanged.

Label plausible user actions. “Slide the corner under the flap” explains what happens. “Grip this part from the front edge” helps show whether there is space for fingers. “The taller tab stays visible above the notebook” connects a feature to the task. When a feature is uncertain, name the uncertainty rather than drawing the idea as if it already works. Write “Will the tab bend inward when the book closes?” That question can guide a quick trial later.

A useful sketch can contain measurements even when it is a first draft. Record the height of the sample books and the amount of card that needs to remain visible. Draw a separate enlarged detail where two pieces meet. The drawing need not be perfectly to scale at this stage, provided you mark actual proposed dimensions as dimensions and explain what would need testing. School instructions will say when a particular drawing convention is required.

Compare three ideas fairly before choosing

Imagine your three sketches all help a pupil find a paper reminder. The desktop strip makes the packing state clear while the pupil is at home. A divider remains with the papers when the materials move between rooms. The folded pocket makes it easy to see a corner of one slip but limits the space for several papers. Early in a project, each idea can have a useful part. The decision is which version fits the chosen user and the known constraints.

Draw a small chart in your own notebook or state the comparison in three short paragraphs. Compare the same criteria for each idea, such as whether a label remains visible, whether a paper is easy to remove, and whether the solution can go in the bag. If you give an informal rating, explain one piece of evidence for it. “Divider scored well because the 15 mm tab stayed visible with the notebook closed during my first fit check” has more value than “Divider gets 5 out of 5.” This chart is a learning helper. A real assessment may use a different approach.

A reasonable choice can preserve a feature from an idea you set aside. You might choose the portable divider and give each raised tab a word from the desk strip. Then record what still needs testing. Combining features creates an additional design question about where the words can remain visible. Choose the next test so it helps answer that question. If the text disappears under a book cover, move or shorten the label and try again.

Build a small model for a question

A mock-up is useful when it makes an uncertain feature visible. It can be made quickly and changed after a test. A model of a flap can show whether a finger can get underneath it. A piece of card folded in two ways can show how the angle affects the visibility of a label. A quick test of three folds can help decide what a more developed prototype needs. Define the question first so the model has a clear purpose.

Suppose a pupil wants a timetable stand for a desk at home. The first sketch includes a wide base and a backrest. The family wants to know whether the timetable is visible from the normal seated position. Use a small paper rectangle with fictional class names. Fold a second sheet or a flat piece of scrap card to represent the support. Keep the mock-up on a clear part of the desk away from food, liquids, electrical items and edges. Use only the paper timetable in the model. Read the test from the same seated position for each result.

Try a low angle and a steeper angle. If you alter the position of the lamp or move the model closer before comparing them, several things have changed. Mark the model position with a small piece of removable tape and keep your own position steady. Use the same text for both stands. Then ask what each test can answer. A test in one room at one time gives local evidence. It leaves open how a different user, desk height or lighting condition might affect readability.

Working with two quick models gives you a chance to learn from both. Suppose the steeper version is easier to see but falls back when one corner is touched. The low version stays steady but the heading is harder to read. A next step could be to keep the steeper angle and broaden its base. That choice is specific because it links each feature to an observation. If the new version changes the base and the angle together, it becomes harder to tell which change improved the result.

Decide what a mock-up cannot tell you yet

A folded card model can help test placement and use. It can indicate possible weaknesses. It gives little evidence about how a full-size object in a different material would respond to heavy use, outdoor weather or repeated cleaning. Treat those as questions for a later stage under the teacher’s guidance. The conditions of a home activity should remain simple and safe. If the final school project has to carry a physical load or be used near a real electrical item, ask the teacher how testing will be supervised.

Sometimes appearance changes performance. A bright paper tab may be easier to find if it contrasts with the objects behind it. A tiny word may look clear on a large drawing and be difficult to read on the actual mock-up. Let the user try the model under familiar conditions. Write down the angle, position or lighting only insofar as it helps another person understand the result. When a visual cue needs to be easy to distinguish, add a clear shape or readable word as well as colour.

If a first test goes poorly, keep the version long enough to show why. Point to the fold that gave way, show where the label was covered or measure the amount by which the object exceeded the available space. One sketch with an arrow and one sentence about the effect can document the issue. It gives you a before-and-after record when the next version improves.

Complete a paper prototype from observation to improvement

This worked project uses a fictional student, Dani, and a shared desk at home. Two children leave a library reminder and a maths worksheet on the same desk. A folded paper marker should help each child identify the item they still need to pack before leaving for school. At present Dani picks up both sheets to check whose work is underneath. The practice uses folded paper and dry, lightweight paper slips. The point is to learn how to build evidence over a sequence of tests.

Record the earliest version of the problem

Dani first tries “We need an organiser.” After watching a family member pack in a short simulation, Dani writes “The pupil needs to identify the maths sheet from the front while both papers are on a shared desk, without lifting the other paper.” The new line is clear enough to test. It also puts a boundary around the project. A very large organiser might make the desk tidy while solving more than the stated need and taking up more space.

Dani chooses a narrow spot beside the books as the model’s footprint and sets a size limit of 12 cm along the front. The label should be visible to a person facing the desk and the user should be able to slide out the correct sheet without needing to move the other one. The school can supply a different constraint in an actual assignment. In this practice, the small footprint provides a reason to compare ideas rather than simply making both labels and compartments larger.

Dani draws three possibilities. A horizontal paper sleeve keeps both sheets close to the surface and exposes a small labelled corner. An upright divider separates them front to back with a visible tab. Two separate paper stands use labelled pockets side by side. A notebook entry explains why each arrangement could work and points out a concern. The sleeve is compact but may hide the bottom label. The upright divider lets both labels face the user but could tip. The two stands give the clearest separation but may exceed 12 cm. This is evidence of a decision before any model is built.

Test one purpose at a time

Dani first models the divider using one sheet folded as a low upright support and two small paper sheets. The first test checks identification only. Lay out the sample sheets and ask the family member to point to the maths label from the stated position without moving anything. In the fictional first run the label sits 4 mm above the front sheet. The user can see the heading but sees only “Ma” of “Maths” because the sheet overlaps the lower strokes. That specific observation suggests moving the text upwards or changing the label height. It also records what the user could already do.

For the second version, keep the front sheet and desk position the same. Raise the tab by 8 mm and leave the size and lettering style otherwise similar. In the fictional result, all five letters of “Maths” are visible to the same user from the same position. Dani can now describe what changed and its effect. A useful label in the portfolio says “Raised tab from 4 mm to 12 mm above the front sheet. Previously only part of the word was visible. After the change the user read the complete word without moving either paper.”

The second test checks removal. The first version did not answer whether the pupil could slide out a sheet easily. Dani resets the model and asks the user to remove the maths paper without displacing the library reminder. In two of three fictional tries, the user bumps the other paper because the two slips sit against the same fold. A separator inside the fold could help. Dani sketches what would happen to the width and keeps a clear note that the front-flap change corrected visibility while removal is still a separate problem.

Make a fair evaluation after a second round

Dani adds a narrow folded layer to separate the demonstration papers. The outside width stays at 11 cm. Repeat the removal test three times with the same user, starting position and order of papers. Suppose the second slip stays in place on all three tries. The result suggests that the added layer helps the sampled user under these conditions. It says little about thicker exercise books or repeated use over several days. Explain what the next test would be if this were a longer project. You might try a different user or a different size of paper, changing one of those variables at a time.

A completed evaluation might read “The mock-up fits the 12 cm footprint and the user could read both labels from the front after I raised the rear tab. The added fold reduced accidental movement of the second sheet in three comparison trials. Next I would test the position of the labels when the user views the model from one side.” This identifies what the team learned, uses the stated criteria, and names a sensible next step. It leaves the final judgement linked to actual observations.

Practice with a new condition. Suppose one child reads the word easily but both folders have the same colour and look alike from the side. Ask what other cue could help. One answer is to give the paper tabs different outlines and keep the subject words. Test recognition from an angle and record what the user can see. Colour, shape and wording can support one another. Check the layout again before adding extra decoration that might cover the label.

Make your portfolio show how you decided

The design record is an account of decisions. Your teacher may ask for a booklet, worksheet, sketchbook, supervised file or another format. Follow the specific instructions and use the examples below to judge the clarity of your work. Give each entry enough context to be understood when you return to it after a week. A date, a short caption and a labelled sketch can be more useful than a page of general commentary.

Consider the reader opening a design record in the middle. They need to find the user’s difficulty, the requirement that guided this version, and the reason a part changed. Place information where it can answer those questions. If your first sketch is on an earlier page, mark the link in the label or explain the connection briefly. “The first tab was 4 mm above the cover. Here it is 12 mm above the cover after the visibility trial” connects the two drawings even if someone reads them out of order.

Use captions that distinguish intention from evidence. “This fold is intended to keep the worksheets apart” predicts a function. “In three removal trials the second worksheet stayed in position” records a test result. “Next I will try thicker paper” is an action. Keep all three if they relate to the same design choice. A child who learns to distinguish these sentences becomes better at reviewing their own work and asking the teacher a specific question.

A useful portfolio sequence might include one paragraph of observed need, two or three idea sketches, a decision with a reason, a mock-up record, a test and a proposed improvement. That sequence helps when school asks for evidence of a process. If the teacher’s template sets different labels, use those labels. Teachers may require the whole design process in one project or practise only one part at a time. A portfolio can also record a late decision to change the requirement when the user tests the first version.

Turn a weak caption into evidence

Here is a first attempt at recording what happened. “I tested it with my brother. The second one was better, so I made that one.” A classroom reader has no way to identify the two versions, what the brother did or which outcome mattered. A revision could say “At the same seat my brother read three of four words when I used the lower angle and four of four with the steeper angle. Both versions used the same printed words. I chose the steeper angle because the brief asks the user to read all four labels from that seat.”

The revised version still has a limitation. If both models sat in different places, distance may have contributed to the result. If the same user saw the labels twice, memory could help on the second attempt. An observant student can add “I changed the order of presentation for a new tester” or “I will compare the versions again from the same recorded distance and use different labels of similar length.” There is no need to claim a perfect experiment. The aim is to decide what the evidence can reasonably support.

Imagine another entry says “I decided against the first idea because I do not like it.” A preference can be appropriate, especially if the project considers the user’s experience or appearance. Make the reason informative. “The first pocket needs the user to lift a corner before they can read the date. My user preferred to see the date immediately, so I kept the open edge from idea two.” The change is now traceable. A teacher can ask whether the open edge stays visible once the papers move into a bag.

Check evidence using a practice review

Read this four-part check as a commentary exercise. It makes no claim about the marks your school will award. A first question asks, “Could a reader see a specific user and situation?” A second asks, “Could the reader see two or more ideas that work differently?” A third asks, “Could another pupil repeat the general comparison from the written record?” The last asks, “Does a change follow logically from the evidence?” Make one margin note for each question.

Apply the questions to this draft. “My cousin often misses a reading reminder. I made two holders. One was wide and one was tall. My cousin liked the tall one. I used the tall one.” The observation needs a time and place. The two ideas need labels so the reader can see where the reminder sits and where the user looks. The test could say what each model showed and how it was tried. The decision should link to a particular quality the user values or a clear requirement. Simply choosing the tall holder could be a reasonable judgement, but the description leaves the reason unsupported.

A student could revise it this way. “My cousin reads the school reminder at a desk before leaving home. When the card sat flat beside two papers, we could not see its heading from the usual seat. My wide model lay low and the tall model raised the label. Both stood at the same position on the desk. The user read the heading at once on the tall model and asked to pick up the lower model. I chose the tall model and will next test whether it fits beneath the shelf.” This version identifies the need, compares models against it and acknowledges another constraint still to be checked.

If your teacher writes “develop your idea”, try asking what development the page needs to show. The issue might be an untested detail, a missing measurement, a repeated sketch with no change or a choice without evidence. Point to the drawing and say “I changed the angle here after the user could not see the label, but I have not tried the revised version yet. Would that be the right thing to test next?” You will get better information by naming a design decision than by asking which decoration to add.

Try the same thinking with a bag tag

For a transfer exercise, imagine a group of friends in Punggol collects their identical reusable bags at the end of a family activity. Each person needs to recognise their own bag while it is on a table with two others. Use three paper rectangles as pretend bags. Keep the project fictional so no addresses, school names or personal details need to appear on any tag. A tag can be identified by where it sits, how its shape looks or which simple symbol is visible from the position of the user.

A pupil sketches two approaches. One sits flat against the pretend bag and leaves a large symbol visible. The other folds over the top edge so a corner can be seen from two directions. Compare their performance by turning the paper bag through a quarter turn, then asking the user to point to the chosen symbol from the same seat. Record separately whether a symbol is easy to recognise and whether the card stays in its intended position. One user may recognise the flat tag at once, then lose sight of it after the bag turns. Another result might show that the folded tag remains visible but covers part of its own symbol.

A good next entry might say “I moved the symbol away from the crease after it became partly hidden in the turned position.” Draw a simple before-and-after view and mark where the fold is. Use a different symbol on one new trial so the response depends more on what is visible and less on what the user remembers. This example gives the student practice turning a fresh observation into a design choice without repeating the first model.

Learn from a model that partly works

A useful model can work in one respect and fail in another. Consider a paper holder raised slightly for readability. In a trial, it takes up less desk space and the top label can be seen from the front. A touch to the side makes it twist, so the other label turns away from the user. The design has improved visibility under one condition and raised a separate stability question. State both facts and pick the next decision. Avoid presenting a single success or failure label for the whole task.

To investigate stability with a paper-only model, work with the same clear desk area and the same paper insert. Press it gently in the same place with a finger as the user ordinarily would when removing the slip. Ask whether the model shifts enough to obstruct the word. In one model a broader base might help. In another, changing the position at which the user grips may matter more. Change one practical feature first and compare the result. This small exercise teaches how structure and use interact without introducing workshop tasks at home.

Students can record a meaningful negative outcome. “Increasing the angle raised the label but made the folded stand tip after one light touch. I will try a wider base without changing the angle.” This is concrete evidence of progress. It helps a teacher see which trade-off remains and how the student separated the two design aims. It also builds a record for a later explanation. A photo may support this step if school permits it, and a quick drawing of the fold and an arrow can communicate the same change.

If the second model improves little, check whether the test is measuring the original need. A user could rate a label attractive but still fail to read it from the normal seat. Ask that user to carry out the real action. Compare your original criterion with the instruction you gave. The action “Read the heading while seated” fits a different purpose from “Choose the label you like most when holding both in your hand.” Both may matter, but one test cannot substitute for the other.

Plan a manageable first term with your child

When the teacher introduces a project, copy down the first submission detail and the class’s preferred way of storing drafts. A family can keep one folder for loose sheets and leave workshop materials wherever the teacher specifies. Ask which dates the class is expected to meet. Those dates may sit alongside work in English, Mathematics, Science, Humanities or a new CCA routine. Seeing the next step allows your child to reserve time for a small test or to ask about a missing resource before the lesson starts.

For a week that includes a sketch, a test and a written reflection, try three short sessions. The first might end with two ideas and a highlighted question about the better one. The second could compare two paper positions and record an observation. The last could write three sentences about what changed. Ask the child to decide where to put each session in their week. If a club, training session or family commitment moves, the child knows what each task involves and can move one rather than treating the whole project as a single unfinished evening.

When your child has no idea how to start, make the smallest decision visible. Ask them to show where an object would sit or which part a user touches first. Encourage them to explain the use while you listen. Then have them make one rough drawing. A student who is stuck on neatness may benefit from working on scrap paper and transferring a clearer version later if the teacher requests it. A student who is stuck on the brief can take the exact sentence to the teacher before investing time in a model.

If your child finds drawing or practical work physically difficult, ask the teacher how the task can be broken into steps and which supports are suitable. The teacher may be able to model the drawing in stages, describe a practical method or clarify what alternatives are allowed. Let the child name the specific struggle, such as following several instructions at once, steadying a model while marking it, or explaining a decision in writing. That detail makes it easier to discuss help that preserves the student’s own thinking and participation.

A school’s department page can give examples of its approach, while the child’s own class notice tells the family what is due. Punggol Secondary School’s Craft and Technology department describes hands-on work alongside subject knowledge. If your child is going there, bring a concrete question such as “Which parts of this first project should we expect to do at school?” The answer may depend on the activity and equipment. A family elsewhere can ask the same question at its receiving school.

Understand the later D&T choice and SEC listings

A lower-secondary D&T project introduces a way of working. School arrangements for the upper-secondary subject are a separate decision. When your child reaches the subject-combination stage, ask whether the school offers Design and Technology for that intake, at which levels, and in what combinations. Ask about school criteria, practical expectations and the coursework calendar. The curriculum your child takes now gives experience with the subject and evidence about what they enjoy doing.

The national SEC lists show which syllabuses are available for school candidates in a given examination year. The 2027 G1 list gives K124 for Design and Technology. The 2027 G2 list gives K234. A listing describes an examination offering for that year. Your child’s school can confirm the actual subject offer and registration at the relevant time. If your child begins Secondary 1 in 2027, use a 2027 examination syllabus as an example of what the document looks like. Their own examination year comes later. 2027 G1 examination subjects · 2027 G2 examination subjects · Examination syllabuses by year and level

A student curious about the later course can ask an older student or teacher how the work develops. Ask what a typical project week involves, what evidence students need to retain, and how they tell whether a new version works. These questions help a pupil compare actual learning experiences with their own interests. There is time to find out which part of D&T is most interesting, whether that is noticing user needs, imagining mechanisms, sketching solutions, making a careful model or solving problems during tests. An overview of design thinking and safe making in Punggol

Questions to settle before a project goes home

“Should we buy a special kit?” Start with the school’s list and ask the teacher what is supplied. Use the materials specified for any real submission. The models in this guide can be explored with sheets you already have. Fold rather than fastening permanently if you want to compare shapes first. Keep your child’s role clear when another family member helps prepare paper.

“Will a simple object be too easy?” Look at the design question. One folded strip can generate several decisions about the user, the position of the label, the way the paper is removed and the space allowed on a desk. The teacher’s brief can tell you which skills need to be visible. If the task asks for a test or a sketch of alternative ideas, add that evidence before trying to make the object look elaborate.

“What should my child show if their model failed?” Show the condition in which it failed, a sketch or caption of what happened, and the next change. For example, “The lower label was covered when two sheets were placed in the stand. I moved it higher and will try again with both sheets loaded.” The failed result helps explain the revision. Use the teacher’s instructions if the assignment has rules about unfinished work or the type of evidence to submit.

“Where should we start tonight?” Ask the child to imitate one ordinary action from the problem. Before folding anything, have them say what a person should be able to do more easily and which observation would show the change. Build a small model, run one short test and write one useful sentence. The next lesson can then begin with a question the student has discovered for themselves.

Compare G1, G2 and G3 subject offers · Plan the first term of Secondary 1

Continue from here: Start Here · Tuition · Education · Pathways · Parenting 101 · All Site Routes

eduKate Punggol

Contact

83 Punggol Central, Singapore 828761

edu|Kate Bukit Timah

8 Fourth Avenue, Singapore 268674

By Appointment +65 8823 1234
admin@edukatesg.com

Email Us

When a child finally understands, school becomes less frightening and the future opens wider. Email us for the latest schedules and fees.

← 返回

感谢您的回复。 ✨