Small Group Tutorials

Here to help students catch up, keep up, and move ahead. Book a consultation here.

Understanding Punggol PSLE Posting Guide PG1 | SEC G1 Design and Technology K124 Coursework Workbook

The 2027 Secondary Education Certificate (SEC) G1 Design and Technology syllabus, K124, has a one-hour written examination worth 30% and an individual Design Project worth 70%. If you are taking the subject in upper secondary, check your examination year and the subject code with your school. Then put the actual project release, progress checks and hand-in instructions in one calendar.

Start your Design Project with a question about what a person needs to do. Keep a dated record of the evidence behind your decisions, especially the sketches, tests and revisions that change your plans. This workbook uses original paper and card practice tasks to show how to build that record. Follow your school’s instructions for the assessed project and use your own ideas, observations and work.

  • Confirm the syllabus year and whether your school has registered you for G1 Design and Technology.
  • Plan the project in stages, record what happened, and adjust the next task when evidence or school access changes.
  • Turn an observed difficulty into a brief and specifications. Decide what would count as success before building a model.
  • Use sketches and mock-ups to compare options and test uncertainty. Keep the original evidence as your design develops.
  • Give the Design Journal, working prototype and Presentation Board enough time. Each lets the reader see a different part of the project.
  • Keep up short written practice in design, mechanisms and electronics while the project progresses.

On this page
Confirm what K124 assesses · Turn twenty weeks into a plan you can update · Find a design opportunity before you make a product · Make the rough models answer different questions · Rescue a test that cannot yet support the claim · Try a second worked project with paper movement · Give each journal sheet a job · Prepare the prototype and the board in parallel · Keep written practice connected to actual design reasons

Confirm what K124 assesses

PG1 is a route into secondary school. G1 Design and Technology is an individual subject a student may take later if offered by their school and included in their subject combination. Secondary 1 common-curriculum D&T gives students design-and-make experience. Upper-secondary SEC coursework has a specific examination brief, conditions and assessment criteria. A family can use the lower-secondary D&T guide to understand how the subject develops and look up the later course on the SEC school-candidate syllabus directory.

For the 2027 examination, the official G1 Design and Technology K124 syllabus specifies five compulsory questions in Paper 1. Questions 1 to 3 carry 18 marks altogether and assess application of design knowledge. Questions 4 and 5 carry 32 marks altogether and assess application of knowledge about mechanisms and electronics. The paper is marked out of 50 and accounts for 30% of the subject. The individual Paper 2 Design Project accounts for the other 70%. Its 20-week period runs from the question paper release and excludes school holidays. Confirm your school’s dates, submission procedures and permitted conditions. A student entering Secondary 1 in 2027 will have a later examination year and should use the syllabus and subject offer for that later cohort.

Paper 2 has two components. One is the Design Journal, which records the work as it happens. The journal format specifies securely fastened A3 sheets or A3 sketch pads, together with the mock-up or mock-ups, the prototype, and any mould, jig or former used. The other component is the Presentation Board, which shows the proposal and highlights the features that serve its purpose. The published format allows up to two single-sided A2 boards. Check which materials your school provides and how it expects you to label physical work. The syllabus advises candidates to keep their working sheets as they are, so start the record when you start making decisions. A fresh entry can explain a revision while retaining the earlier sketch.

Think of the written paper and design project as opportunities to show the same habits in different settings. In a written answer you might explain how a mechanism changes movement in a particular product. In a project you might create a paper mock-up to see whether the intended user can move a part through the available space. Both require you to connect the principle to the action, show the relevant evidence and explain the effect on the person or product.

Turn twenty weeks into a plan you can update

Choose a planning method that you can maintain while you are busy. A time-stage plan, such as a Gantt chart, can show what overlaps and where you need a decision before you move ahead. Mark the actual question release and the school’s final collection date first. Add known supervised sessions, progress checks and handovers. Work backwards from the end far enough to leave time to check what survived the final build, complete the board and verify that the physical pieces can be identified for submission.

Here is a practice calendar. The week numbers are examples of project time, with holidays excluded as the syllabus states. Your school’s actual plan may be different. In weeks one and two, understand the question and identify a manageable situation to observe. By the end of week four, aim to have a brief and a small set of specifications grounded in evidence. By the end of week seven, compare ideas through sketches and early mock-ups. In weeks eight to twelve, develop the most promising direction and test the dimensions or action that cause the greatest uncertainty. In the following weeks, schedule supervised making and quality checks alongside work on the board. Protect time near the end for corrections, a final demonstration, and the school’s submission steps.

A calendar needs details at the point where you will use it. Suppose your plan says “Make mock-up” in week six. Add purpose, output and decision. “Build two card receiver mouths of different widths; try six insertions with identical sample slips; choose a width for the next fit model.” Now you can tell whether the week’s work answered the question. A session can be successful even when both mock-ups need improvement. You should end it with a reason for the next version.

Keep weekly progress notes beside the original plan. One short entry can say what you expected to finish, the result, what changed and which task depends on it. For example, “The second school session moved to Thursday. I compared the ramp angles in paper on Tuesday as permitted, then used Thursday to check the working dimensions with the teacher. I can still start the next school-approved build session, provided the material is ready.” A plan that accurately shows a change reflects work being managed. Moving a bar on a chart without a reason gives the reader less to follow.

Put a decision before an expensive or time-consuming action

A project plan has dependencies. You may need the user’s reach distance before you settle the handle position. You may need to choose a material before you discuss a supervised joining process. You may need a stable sketch before investing time in a clean board illustration. Write one dependency beside each major commitment. If you cannot name one, ask what assumption would make the completed task need to be done again.

A student whose progress slows can put tasks in three groups for the next school check: something to clarify, something to test, and something ready to complete. “Clarify whether the card guide must detach; test its position with the practice slips; complete the front and side drawings after testing” makes the next session concrete. “Finish design” can feel impossible because it bundles several unsettled decisions together. Write down which parts may be worked on at home and which the school expects you to do under supervision.

Suppose the first test takes longer than you planned because participants disagree about how the product should be used. Redoing a large set of identical trials will rarely resolve that confusion. Change the instruction so it represents the intended user’s activity, check whether that activity matches the brief, and record a new trial date. If this affects access to materials or a class deadline, tell the teacher early with the work already available. Ask which unresolved question is most important for the project and which task can still move forward.

Worked plan repair with three sessions left

Imagine you reach a checkpoint with a serviceable paper model, a draft drawing and three planned supervised sessions before your personal target for a working prototype. The latest test shows the user can insert a sample sheet from the front, but removal needs a second hand. Decide how to proceed before listing tasks. Is one-handed removal a core specification, a useful preference, or a new idea that grew out of the test? If it is a core specification, spend the first available session investigating the removal problem. If two-handed removal fits the actual brief, verify whether the current model already meets the intended need and keep the schedule focused.

For the one-handed case, a sensible sub-plan has one change per trial. Try a paper tab that gives a clear grip first. Next check whether enough of the sheet stays visible with that location. If the result meets the two accepted criteria, confirm with the teacher that the final construction plan is feasible. The second and third sessions now have a particular purpose. Record which lower-priority feature will wait, such as trying a second colour pattern. Your plan can name the choice and the constraint without rewriting the notes about the failed attempt.

Find a design opportunity before you make a product

Start by reading the issued question carefully. The exact theme and instructions shape what the real project can address. The cases in this workbook are fictional and designed for practice with paper or card. Use the same habits to investigate your own situation when your school releases the project requirements. During informal observation, ask permission, collect only information needed for the design and leave personal details out of the journal where possible.

Consider a shared craft table in a Punggol flat. At the end of a drawing activity, one pupil clears the table while another puts the reusable card scraps into a tray. Their family wants to set clear, usable card pieces aside for later. During a short practice run someone picks up a folded scrap, makes a dark pencil mark on a clear side, then decides the scrap still belongs in the reuse pile. It goes back alongside pieces far too small for the family’s next activity. The next person searches through all the scraps before finding one that fits. There is an observed difficulty at the point of selection.

A first reaction is to make a larger box. Look at the action before committing to that object. A larger container holds more scraps, but a pupil might still search for pieces of the right size. One approach is to help someone sort scraps as they clear the desk. Another helps them select quickly during the next activity. A third uses a size reference for both tasks. Each approach affects the person and environment differently. A larger container may use more room than the family has. A simple reference at the point of sorting may leave more of the desk free.

Write one brief and keep the evidence beside it

A practice brief could read “Design a way for a pupil clearing the shared craft table to recognise and set aside card pieces suitable for the next label-making session.” The phrase “label-making session” gives a clear reason to measure. If the next labels are 45 mm by 65 mm, check that a usable area of at least those dimensions remains. Evaluate the actual activities where you intend to use the device. A piece exactly that size might be useful if dimensions are reliable or too tight if a margin is required. Put the chosen rule in the specification and give its source.

The student might record six practice pieces and note that two have a crease through the only suitably sized area; three have a clear shape of usable size; one looks wide enough but is too short. This lets the student recognise that overall scrap width can mislead. Draw the rectangle that the user needs to find within the scrap, rather than treating every piece of similar size as suitable. If the actual design question relates to a different context, choose a measurement that matters to the people and activity in that context.

Write three practical specifications before drawing possible products. The user should identify a clear 45 × 65 mm rectangle in a scrap while it is still on the table. The device should fit next to the existing shallow tray in the 150 × 120 mm rectangle allotted on the desk. The check should be possible without marking the reusable region. Each specification can be tested with sample pieces or measured with a ruler. A secondary preference might be that the device folds for storage between sessions. Give stricter requirements priority when a feature competes for space.

A strong record distinguishes what someone told you, what you observed and what you inferred. “The user said their next label needs an area of 45 × 65 mm” captures a statement. “In the third trial the user rejected a piece whose fold crossed the required area” records something that occurred. “A transparent reference may help the user identify a clear region more quickly” is a design possibility. Write what you can check again. If a class exercise uses selected digital materials, ask which research records and permissions are expected.

Repair a design brief that names the answer too early

Take this draft: “I will design a box with a lid and two slots for recyclable paper.” That describes a proposed product before the difficulty is defined. A useful practice revision is “A pupil putting craft scraps away needs to recognise which ones can become standard-sized labels while using a small shared table.” The revised sentence makes room for a fold-out gauge, a corner guide, a labelled sorting surface or a process that uses the existing tray. It also narrows the project to a single activity a student can observe. The exam’s actual brief still determines whether an idea is in scope.

Now revise this weak specification: “It must look nice and be easy to use.” If visibility matters, say “A user should be able to identify the size guide and demonstrate where to place a sample scrap on their first attempt after reading one short printed instruction.” If the user needs to remove the guide quickly, say “The user should be able to lift and set the guide beside the tray without displacing the saved scraps.” How you observe and record whether the trial satisfies the target matters more than finding impressive words.

Make the rough models answer different questions

Sketch at least three genuinely different approaches for the practice scrap checker. One idea is a folded corner with a marked opposite edge, so a pupil slides the scrap under two tabs and sees whether both dimensions reach the marks. A second uses a flat reference outline with a lighter coloured removable square near one edge to illustrate what area needs to remain clear. A third shifts the test into the placement area next to the tray so rearranging a scrap is part of the sorting action. The first makes alignment simple for right-angled pieces. The second leaves room to turn irregular shapes. The third affects the overall desk layout and the way someone puts an item away.

A mock-up should explore one uncertainty at a useful scale. Build flat paper versions of the corner guide and the reference outline first. Use a known sheet or ruler for the dimensions. Use pieces that are already cut and add removable tape where it helps. On scrap number two, rotate the paper to find a 45 × 65 mm region and see whether the model helps you check the entire region. Compare the versions with the same set of examples, with the same intended criteria and in the same location. If several people try a version, record which design they encountered first or vary the order in the practice trial to reduce the effect of learning.

The two versions can help with different parts of the task. Suppose a small paper corner is easy to align but hides a crease when the piece slips under the paper guide. The open reference outline shows the crease but demands more care to align. A revised idea can have a narrower corner guide with a visible opening between its edges. That gives the student a real reason to work from two early ideas. Draw the new option and put one caption beside it: “Reduced coverage around the corner to show the crease while keeping two straight references for alignment.”

Do another trial using a different slip with a diagonal edge and one with a crease crossing the possible usable area. A sample of four or six pieces can include a clear success, a clear failure and at least one case near the boundary. Count correct classifications only if the practice examples have already been checked independently against the specification. A decision requires knowing what “correct” meant. If participants rate speed differently, show what task happened rather than averaging unrelated ratings.

A small test record might say “Using the folded guide, the user identified four of six pieces as suitable or unsuitable against the measured reference. They missed a fold in two because the edge guide covered the marked area. The narrower guide led to six of six in a repeat with a different set of the same difficulty. The second set had been measured separately.” This fictional result gives a reader something they can question. Would another pupil get the same result? Could the sample pieces have been easier the second time? One further test might compare both models again with the same measured set in a different order.

Check how the change affects a second requirement. A narrower guide shows more of the scrap, but it may be harder to pick up or move deliberately. Before deciding it is the final idea, put it beside the tray and complete the actual clearing task. Say which feature matters in each trial. A note about easily reading the markings does not prove that the entire design stays within its allowed footprint. One test can support several claims only when the relevant observations were all made.

Rescue a test that cannot yet support the claim

A test can be worth recording even when its method leaves the result open to several explanations. That is the starting point for the next design choice. Suppose a student compares two versions of the scrap guide in the evening. One is a wide outline and the other is a narrower folded corner. A sibling correctly checks five of six pieces with the narrow guide, while a parent correctly checks three with the wide outline. The student writes “The narrow guide is more accurate.” Work out what else changed before deciding what to do with that claim.

Two users may approach the sorting task differently. One may have already watched an earlier demonstration. The other may be trying an unfamiliar instruction. If each model receives a different scrap set, some pieces may be clearer examples than others. Lighting, time pressure or the question the tester hears can also influence the outcome. Pick out the changes most likely to matter. In this case use one test sheet that tells both users how to identify a suitable scrap. Offer each user the same size categories, and keep the material quality similar across both sets.

Repeat the pair of comparisons. Ask one person to start with the outline and the other to start with the corner guide. Keep the piece placement consistent. Two small measured sets of similar difficulty will let the student include fresh examples when users repeat the task. The intended design use should determine your instructions. If users normally need to make the decision without a lesson, use a short label on the device and observe what they do on their first attempt. If the device is introduced during a session, match the test to the instructions a normal user would receive.

A fair conclusion might be “Both users aligned rectangular scraps with the folded corner more quickly. Both missed a diagonal crease when it ran under the fold. A different placement could keep the fold visible.” That conclusion separates a result about alignment from a problem in judging the usable surface. Two trials from each user remain a small amount of evidence. Make the next action proportional to the result. You might change only the fold width and check that the feature which helped alignment is still there.

The first notes still belong in the journal. Add a dated entry that says why the design team repeated the test and what comparison now gives the clearest reason for a change. An honest entry can show that the designer identified a limitation, located a useful variable and investigated it. If the first sheet is messy, ask the teacher how it prefers a small explanatory addition to be made. Keep the record of the first attempt. A polished rewrite can erase the decisions the reader is trying to understand.

Troubleshoot a change that solved one problem and created another

Imagine the corner guide is stable in a flat position, but the raised finger tab stops the corner from fitting inside the allotted rectangle when left open. The user values easy lifting between uses. The size restriction still applies. First check whether the restriction is about use, storage or both. If the device must remain within the footprint while in use, show how far the tab extends and in which direction. If the constraint applies only during storage, a fold-flat approach might meet it. Ask a neutral question if the brief is unclear rather than gradually changing the specification to suit the model.

A mock-up can reveal the right decision quickly. Draw the footprint on a spare piece of paper and place the model inside. Compare a raised tab that folds flush with a shorter tab that never projects beyond the outline. Keep the user task consistent. If one version can be picked up readily and fits both required positions, describe the result clearly enough to see it in a drawing. If the short version is more difficult to lift, record where the fingertip loses its hold. Narrow the question to a dimension that can be measured and revised.

Sometimes the right response is to abandon a feature. If the user can lift the plain corner from one exposed edge, a tab may add complexity without addressing a need that still exists. Draw the revised outline and identify the part that now gives access. Then ask whether the action puts pressure on another requirement. The goal is a useful, feasible proposal. The journal captures the decision to simplify and the trial that supports it.

Try a second worked project with paper movement

In this practice case, a group moves between two tabletop activities at a community workshop. Participants pass a paper name token forward to show they are ready for feedback. On a busy desk, new tokens become mixed with those that have already been looked at. The task is to communicate whether a token is waiting or has been checked while taking up little space and requiring a brief interaction. Use fictional paper tokens on an ordinary desk. This case gives students practice with position, movement and an indicator.

The first design is a flat strip divided into two zones. A user moves the token from left to right into the checked zone. The second design uses two shallow folds and a sliding paper flag to show the current status of a single token. The third uses a reversible folded card that the reviewer turns after giving feedback. The first keeps several tokens visible. The second uses a location cue and a distinct movement. The third needs little room but assumes that the reviewer can clearly read either face. These differences reflect different needs and environments.

Pick two questions to investigate. “Can a person who arrives late tell whether their token is waiting?” examines communication. “How far does an individual card have to move during the change?” examines use of desk space. Try both models in a clear space on the table, with the same tokens and the same distance from the viewer. Ask the user to state what they think each visible state means without touching the piece. Measure the space the part occupies across the movement separately. It is possible for an idea to do well on one check and poorly on the other.

For the sliding idea, two loose folds of paper can serve as an open track. Place a small paper strip between them and slide the strip by fingertip. Keep the whole movement on the tabletop. The mock-up needs only a readable waiting state and a readable checked state, plus enough guidance for the user to move between them. If the strip turns instead of sliding straight, identify which contact allows it to twist. Two points of guidance separated along the strip may control its position better than a single fold. Sketch the direction of the unwanted movement and the change you will compare.

Imagine a test with two versions, both made from the same batch of card. The first sliding strip is 30 mm wide and the gap is 36 mm. Over five gentle changes from waiting to checked, it twists and stops twice. The second gap is 32 mm. Over five changes, the strip still moves freely and remains aligned. A tighter guide might cause drag if the card thickness changes. Draw a cross-section showing where a variation could occur and write a realistic question for the next school session about acceptable clearance. A paper version provides useful evidence about layout without determining every measurement for later supervised making.

For a new trial, choose one version and rotate it relative to the user. In a small room where people sit on different sides, the word “checked” may be upside down for some viewers. A short word and a separate shape cue can share the work. Test what a first-time viewer notices from the actual viewing position. Ask them to explain which state they see. Keep enough contrast between sections and include a clear visible state besides colour where colour alone might cause uncertainty.

At the end of the example, identify which version suits the brief. If the problem is that several tokens get mixed up, the sliding idea that handles one token may leave a queue unorganised. The flat strip with clear zones may address the original activity better. If a later design question concerns a private one-to-one check, the sliding indicator may be a more suitable direction. Describe the conditions under which the choice makes sense. Evidence helps a student match the design to the person and the activity at hand.

Give each journal sheet a job

When you open the Design Journal, a reader should be able to trace a choice back to the question that led to it. One sheet might record the moment a person struggled to read a token. Another could compare two ways to display the state and show which part moves. A later sheet could explain why the clearance changed after a test. Create the record as the work proceeds and use the instructions given at school. You can add a useful reference to the earlier sketch where the reason for the change first appeared.

For a concise design sheet, start with a question the work on that sheet answers. Put a few readable views near the relevant information. Draw the point of contact, indicate which direction a part moves, and label enough dimensions to explain the next comparison. A drawing that leaves the starting state unclear may need a simple second view. A plan or a side view can expose a space issue that an attractive three-quarter sketch leaves hidden. Follow the drawing requirements published by your school.

Use a sequence when a change depends on several attempts. Sketch model A with its loose guide, record the test, sketch the proposed improvement, then add evidence from model B. A student who notes the test before the improved version can use a small arrow or sheet reference to connect the two. If there are three versions, make the link direct. The reader should be able to see what remained constant and what was changed. You do not need a long prose account of every move if the visual evidence and short labels support the decision.

Work through a weak and stronger journal entry

Take this fictional note: “It jammed, so I improved the mechanism. I might paint it blue.” The reader can see a problem occurred, but the note omits what was moved, where resistance happened and why. Try a revised description: “With the guide fixed at 36 mm and a strip width of 30 mm, the strip turned diagonally and stopped at the guide entrance in two of five pulls. A plan sketch marks the collision at the left edge. I will keep the strip and starting position and narrow the guide opening.” The caption links the action, the observation and a defined comparison.

Add a companion sketch or one new line after the repeat. “At 32 mm the same strip remained aligned for all five pulls with this paper model. I need a separate trial for thicker material because the clearance could change.” This sentence leaves space for uncertainty without hiding a useful improvement. A colour choice can still be recorded when it serves a purpose, such as distinguishing which panel moves. Give it a reason that a user would recognise or test through a new practice trial. Colour by itself cannot explain a movement change.

A reader may also want to know whether the narrow appearance is the same when viewed from the front. Label the parts in both positions and add a view that shows the guide from above. A photograph, if used under school instructions, can complement a sketch with a close view of the problem. Place simple annotations near the observed failure. A pile of otherwise similar photos gives the reader less help than a carefully selected view with an explanation of what to look at.

Prepare the prototype and the board in parallel

The school can advise on how a prototype will be made, demonstrated and submitted. A model that helped explore dimensions may use a different material from the approved prototype. Decide which features must work in the prototype, which dimensions need repeated checking, and which activity the object must demonstrate. In practical lessons, follow the teacher’s approved methods, equipment rules and quality checks. Save time in the schedule for checking how parts align and how the design functions before final submission. The K124 subject and project documentation describes the expected practical evidence.

A sensible quality check has a reference point, an observation and a decision. For a practice paper flag, you might check that the gap is 32 mm at both ends. If one measurement is 32 mm and the other 34 mm, work out whether the difference causes the strip to turn. Mark the same reference edges in the drawing where you entered those measurements. If the design specifies that the waiting state remains visible until the flag moves, check both ends of travel. Small variations have a practical meaning when the design shows what each part does.

The board’s main job is to show the proposed solution clearly. Begin with the design brief and specifications, then decide how the reader will see the solution in use. For the token example, one large view could show the indicator on the tabletop. A close-up could show the two visible states and the position where the fingertip interacts with the strip. An arrow can show travel direction. A labelled detail can show the guide opening. Short text can identify the feature that supports easy alignment. The images should help someone understand what the product does even if they have never opened your journal.

Suppose your first board draft looks attractive but shows the solution only from above in one position. Ask a person who has not seen the project to point to where the user touches it and predict what changes after the move. If their answer is wrong, examine what your drawing leaves out. Add a small sequence of two states, a secondary view or a more informative label. The objective is reader understanding. A repeated pattern, extra page heading or second colour scheme may do little to answer the user’s question.

Check that the same project appears across the submission

Before the final lesson, compare what the journal records as the latest decision, what the board proposes, and what the prototype demonstrates. A mismatch can come from an older drawing staying on the board after a practical dimension changed. Ask which version is being submitted and why it differs. If the board shows a state the prototype cannot reach, investigate whether the drawing is misleading, the working adjustment is incomplete or the prototype represents a revised idea. Use the school’s instructions on correcting or updating the evidence.

Number or identify the gathered paper mock-ups according to the school’s directions. In your own notes, point to the earlier record that explains each version. Put the physical pieces together when permitted so you can see which is an exploratory version and which is the prototype. If you used a tool aid that is part of the required submission, check the school’s hand-in steps. Read the due date and labelling instructions before leaving class. Those small checks leave less uncertainty in the last week.

Practise responding to two kinds of feedback

Suppose a review of the paper token project has two comments. The first says that the board does not yet show the two visible states. The second says that the paper flag binds at one end even though both positions are clear in the sketch. Write a response for each before doing more work. For the first, add two drawings with consistent views and ask someone unfamiliar with the idea to explain the sequence. For the second, measure the guide at the points where the strip binds, check the end positions and record a practical adjustment that your teacher approves. The first check investigates communication. The second investigates whether the model functions reliably.

The published K124 project criteria include planning, evidence for the brief and specifications, development, drawing, mock-ups, communicating the solution and realising the prototype. Use the criteria to locate the evidence your work contains when the teacher gives feedback. For instance, a prototype that moves freely shows something about the outcome. An earlier pair of test records can show how you got there. Give the teacher the relevant pages rather than trying to use the object to explain the entire process. When practising, ask which evidence needs to be clearer. The teacher can explain how the actual assessment criteria apply.

Keep written practice connected to actual design reasons

Put aside a short session for Paper 1 throughout the project. For the current K124 syllabus, mechanisms and electronics form questions 4 and 5, while the earlier questions cover Section 1 design application. A useful routine is to take one new situation, name the principle, predict the visible effect, and give a reason relevant to the user. Ask the teacher for suitable school practice papers and confirm the expected language in the exam year. The exercises below are newly written practice examples.

Question one. A lever pivots on a paper diagram. A user pushes down on the left end and the right end rises. The design must lift a lightweight paper flap but has limited space for the user’s hand movement. Explain one trade-off involved in moving the pivot nearer to the flap. A strong answer identifies that the load arm becomes shorter relative to the effort arm for the given overall length, which can reduce the effort force needed for a given load in an ideal lever. With a given effort-end travel the load end then moves a shorter distance. The design still needs enough lift to reveal the flap. The answer links a simple mechanical relationship to the requested result.

Question two. Imagine a diagram of a desk reminder that lights a small indicator when ambient light drops below a chosen threshold. Sketch the roles of a light sensor, a controller that interprets its signal and the light that the user sees. The sensor supplies input on the measured light, the controller processes that signal and decides when the output changes, and the indicator provides the visible output. Whether the whole arrangement uses feedback depends on how the output affects the quantity being sensed and controlled. A simple example where the sensor reads ambient light and the indicator is arranged so it does not affect that reading need not regulate the room lighting. A design description should tell the reader what is measured and what action changes.

Question three. A pupil draws a tray that has almost the same surface colour and tone as the items it holds. During sorting the user overlooks the tray edge. Explain one design change and one way to test it. A good response might use a contrasting inner border at the edge the user needs to see. Try the same item and placement under the same lighting, then ask a first-time user to indicate where the tray begins. A clear response explains why the boundary should become easier to see and identifies what observation would support the claim.

Ask for useful help in the last few weeks

A parent can help by listening while the student explains the next decision, helping them remember a booking, or asking what would count as evidence. The student owns the design judgement and coursework. A question such as “Which page shows the first test, and what changed after it?” invites them to locate and explain their record. A teacher may give guidance within the coursework arrangement. Ask the school what help is permitted and how evidence should be kept.

If you are behind, take your plan, the latest draft and one unanswered question to the teacher promptly. Describe what you can complete at the next supervised session and what needs clarification. A student with a clear plan for testing and a straightforward design may finish with better evidence than someone who tries to add a new complicated feature just before submission. Keep working on what the brief, specifications and project diary justify.

If you are choosing the subject for upper secondary, ask your school how it schedules project time, which subject combination fits, and what kind of independent observation or practical work students do. For the exam structure and a compact overview, read the Punggol guide to K124 Design and Technology coursework. For the national course list, use the current school-candidate syllabuses for your year. Return to the same question whether you are planning your first paper model or preparing the final submission. What is the user trying to do, which evidence explains your chosen feature, and what will you check next?

Compare G1, G2 and G3 subject offers · Compare Secondary 3 subject combinations

Continue from here: Start Here · Tuition · Education · Pathways · Parenting 101 · All Site Routes

eduKate Punggol

Contact

83 Punggol Central, Singapore 828761

edu|Kate Bukit Timah

8 Fourth Avenue, Singapore 268674

By Appointment +65 8823 1234
admin@edukatesg.com

Email Us

When a child finally understands, school becomes less frightening and the future opens wider. Email us for the latest schedules and fees.

← 返回

感谢您的回复。 ✨