SEC G1 Computing K127 Paper 2 is a lab-based practical examination. The published 2027 syllabus specifies two hours, 90 marks and 60 per cent of the subject result. Candidates work on a computer and submit the required files. Time spent saving those files comes out of the two hours. 2027 K127 examination syllabus
This workbook gives Punggol students one fictional exhibition brief with three connected practical tasks. You will make a media graphic, use a spreadsheet and document to communicate a decision, and build a block-based program. Practise the tasks separately first, then try the complete set and check the files you would hand in.
- Read the dated syllabus and your school’s instructions for your own examination year.
- Use the practice filenames and figures in this guide for the fictional exhibition only.
- Keep source files, editable work and the requested hand-in files easy to identify.
- Calculate two expected spreadsheet outputs and predict program responses before operating the tools.
- Save early, then inspect the final files against the task.
- Use the official specimen after the practice to compare how a published brief presents its instructions.
On this page
What the 2027 practical examination expects · Set up a practice folder and read the exhibition brief · Task 1. Build a visitor sign in the media editor · Task 2. Use the spreadsheet to find capacity and costs · Task 3. Build a block-based admission checker · Try an independent version with a different brief · Rehearse the full two-hour session · Review your work like a second reader
What the 2027 practical examination expects
The 2027 K127 syllabus divides Paper 2 into three tasks. The published marks breakdown gives roughly 30 marks for media software, 35 for document processing and spreadsheets together, and 25 for programming. Those figures are approximate allocations within the 90-mark paper. All four practical modules appear in the Paper 2 specification. Paper 2 assesses practical application under assessment objective AO3. Paper 1 has a different format and weighting. Use the national document for the distinction between the papers and your school for the arrangements that actually apply to your cohort. School-candidate syllabus index and specimen paper links
For centres, the 2027 syllabus describes a laptop for the sole use of each candidate and approved software for media, document processing, spreadsheets and programming. This workbook gives instructions in terms of the intended result and the kind of operation. Your school can tell you which applications to practise in, how candidate work is saved on a lab machine and what resources apply on the day. A student entering Secondary 1 in 2027 is looking ahead to a different examination cohort. Verify the assessment format, software and submission instructions again when the school confirms the applicable examination year.
This workbook is an original practice project. The fictional names, marks from a home check and suggested time windows are learning aids. The local setting helps you imagine a user and a purpose for each file. There is no real booking system, school event or venue arrangement behind the figures. You can make your own practice files from the data and descriptions below. The official specimen shows how a national task and its source materials are presented for the stated year.
Set up a practice folder and read the exhibition brief
Imagine a Punggol learning club is hosting a two-session pop-up exhibition. This fictional exhibition has three activities, Map Trail, Paper Bridge and Rhythm Board. The organisers want to see which activity runs have room, what materials will cost and how many people a helper may admit to an individual run. Their work needs three things. A compact graphic helps a visitor find the correct desk. An internal document lets a coordinator understand the numbers. A small program gives a helper an immediate result for a proposed group.
For this exercise, name the working folder HarbourLab. Inside it, create a folder called Source and another called PracticeHandIn. If your teacher has already named folders and files, follow their instructions. Make a list of four final practice files before you begin. Keep one editable graphic, one spreadsheet, one document and one program. You may also need an exported graphic if the practice brief asks for one. The exact required extensions depend on the tools you use. Choose a native editable format for each file unless your teacher or a practice instruction specifies an export.
For the practice hand-in, use the base names HarbourSign, HarbourVisits, HarbourBrief and HarbourCheck. An optional image export uses HarbourSignPreview to make its purpose clear. An export is useful for inspecting a graphic outside the editing application, while the editable graphic retains objects and layers that you can modify. If you are working from a teacher’s supplied source, keep the supplied file available and use the destination and saving procedure the teacher has asked for. During a timed rehearsal, start with the available files the way your teacher sets them up.
Take a minute to separate the audience for each piece of work. The graphic should serve a visitor who wants to know where to go. The spreadsheet should serve an organiser who needs calculations that change when an input changes. The document is a short briefing for a coordinator deciding whether to open an additional activity run. The program is a model for a helper at one station. A decision that belongs in one file might confuse the reader of another. For example, a cost total belongs in the internal worksheet and briefing. The public sign needs simple directions.
Write down what changes and what stays fixed. The activity label and capacity per run come from a small lookup table. Registrations vary from one run to another. The materials price applies to each participant based on their activity. The decision rule reports Full when registrations equal capacity and Open when registrations fall below capacity. The exercise data contain no over-capacity rows. Later you will test how the validation handles that kind of input. These rules are the basis for checking the spreadsheet against the program without expecting either one to read the other.
Task 1. Build a visitor sign in the media editor
Make a single landscape vector sign for a fictional exhibition desk. Use a large title, “Find your activity desk”, and three destination cards beneath it. The cards read “Map Trail · Desk A”, “Paper Bridge · Desk B” and “Rhythm Board · Desk C”. Put the line “Show your activity code to the helper” beneath the cards. Use one simple icon per card and retain all text and shapes as editable objects. Name the editable work HarbourSign. If you create a preview, save it with the separate preview name. Check that there are no real school identifiers in the final sign.
Choose a wide canvas and leave a visible margin around the outer edge. Imagine the title taking the top quarter and the cards occupying a single row below it. Begin with a background rectangle. Give it a light solid fill. Draw one card and choose a consistent outline and fill. Duplicate the card twice, then distribute the three cards so the gaps look even. If the application offers alignment tools, use the tops or centres as a reference. Keep all three cards fully within the canvas. The equal cards organise the information before you add any decoration.
Build three icons from simple geometric objects. A folded map can use three connected polygon panels drawn by you. A bridge can use two support rectangles and one narrow deck rectangle. A rhythm marker can use three filled circles with one larger circle for the first beat. Give every icon a recognisable silhouette. The visitor can still use the sign because each destination has a written label. The icons provide a second cue. Select each set of icon components, group them, and move or resize the group to the intended position. Check that the icon still sits centrally when selected as one object.
Give the title the strongest visual weight. Use a readable typeface and make the desk letters easy to find. One solution makes each activity name one line and each desk label a second line. The exit instruction can sit below the cards with enough vertical space to remain legible. A student may use a muted teal accent for card headings and a dark neutral for instructions. The brief leaves colour to your judgement. Test your choices at a small viewing size. If one label needs close inspection, adjust the spacing or text size before adding another visual element.
Add a narrow accent rectangle behind the title region. Pay attention to the stacking order. When a newly drawn rectangle covers the title, send it behind the title objects or move the title forward. Leave the card outlines visible. A rectangle partly overlapping the card area can help reveal whether the front-to-back order has been set deliberately. For this exercise the finished version can keep the accent separate from the main cards. Use the layers or object list in the application if a direct click keeps selecting the wrong shape.
A worked layout puts the title in the upper left above the three cards. Each card holds an icon near the top, then two lines of dark text. The bottom instruction runs across the full lower margin. The order left to right is A, B, C. Every label is written out, so the viewer can match a name on a note to the sign. The grouped bridge icon may originally sit over the card title. Move the group upward together. If you move only the deck, the supports will be left behind. Zoom out again and verify that its new position improves the gap between the icon and the text.
Inspect the sign as a visitor would
Read the brief with the graphic open. Point to the first information a visitor should see. Then find Desk B without leaning forward. Imagine the graphic has been reduced to a quarter of the screen. Check the activity names, desk letters and final instruction at that size. An ornate icon can lose detail at small sizes. Preserve the written labels and simplify the icon or give it more room. If any title is crowded in its card, increase the margin around the label or use a shorter line break that keeps the wording intact.
A media file can look correct and still contain a practical error. For example, suppose the preview displays two labels for Desk A, while the editable sign is correct. Check whether you exported before making the label correction and reopen the most recent export. Another task may require only the editable file. Make sure the version you are checking is the version named in the brief. When an export is requested, check its crop and extent. The whole sign may be on the canvas even if the exported selection captured only one card.
For a quick independent retry, move the cards into one vertical column while keeping their order. Change the canvas shape or page arrangement to fit the new purpose. Keep the icon, activity name and desk letter together as each card moves. Inspect the alignment and export only if the practice asks for it. You can also change the activity names in your own copy. That gives you a way to test whether your layout decisions allow longer labels without collisions.
Task 2. Use the spreadsheet to find capacity and costs
Set up sheet Runs with these headings in row 1: Run, Activity code, Registered, Activity, Capacity, Materials per participant, Spaces left, Materials cost, Status. The first three columns are the supplied figures, and columns D to I will be calculated. Put the activity reference table in K1 to N4. Use headings Code, Activity, Capacity and Materials per participant. Start with separate rows for the lookup and the run records. Treat the reference table as the only place to change shared activity details.
Enter these three reference rows. K2 to N2 contains MT, Map Trail, 12, 0.35. K3 to N3 contains PB, Paper Bridge, 10, 0.60. K4 to N4 contains RB, Rhythm Board, 8, 0.20. The rate is in Singapore dollars per registered participant. Enter the price as a number, then apply currency formatting. When you look at the formula bar, the numeric price can still be used as a multiplier.
Enter this source data in columns A to C. Row 2 is A1, MT, 9. Row 3 is B1, PB, 10. Row 4 is C1, RB, 6. Row 5 is A2, MT, 12. Row 6 is B2, PB, 7. Row 7 is C2, RB, 8. Each row describes a separate activity run. The capacities repeat because the station stays the same, while its registered figure can change. The sheets for this exercise use fictional counts from the introduction. They require no personally identifying information.
In D2, enter =VLOOKUP(B2,$K$2:$N$4,2,FALSE). In E2, enter =VLOOKUP(B2,$K$2:$N$4,3,FALSE). In F2, enter =VLOOKUP(B2,$K$2:$N$4,4,FALSE). Use the equivalent syntax for the school’s spreadsheet if it displays separators differently. The fourth argument requests an exact match and the locked range keeps the search in the reference table when formulas are copied. Check that the cell still points to B2 for the activity code in the first row. The column number tells the function to retrieve the activity name, capacity or price.
In G2, use =E2-C2. In H2, use =C2*F2. In I2, use =IF(G2=0,"Full","Open"). That final formula assumes a valid registered count from zero to the capacity. Use a formula or an entry rule to prevent invalid figures before relying on it. Copy D2 to I2 down through row 7. Inspect E5 and F6. E5 should use B5 to return 12 for MT. F6 should use B6 to return 0.60 for PB. The leftmost column in the lookup range contains the activity code. The function needs that relationship to return the correct values.
Check the numbers with an independent calculation
Run A1 has capacity 12 and 9 registrations, leaving 3 spaces. At $0.35 per person, its materials estimate is $3.15. Run B1 has 10 registrations and capacity 10, leaving zero, so it is Full. Its cost is $6.00. Run C1 has 6 registrations and capacity 8, leaving 2 spaces and a cost of $1.20. Run A2 is Full and costs $4.20. Run B2 has 3 spaces left and costs $4.20. Run C2 is Full and costs $1.60. Your worksheet should display Open, Full, Open, Full, Open and Full in order from row 2 to row 7.
Sum C2 to C7 to get 52 registrations. Sum E2 to E7 to get 60 places. Summing G2 to G7 should give 8 spaces left, which is also 60 minus 52. Sum H2 to H7 to obtain $20.35. An alternative check adds costs by activity. Map Trail has 21 registrations at $0.35, or $7.35. Paper Bridge has 17 at $0.60, or $10.20. Rhythm Board has 14 at $0.20, or $2.80. Those three totals add to $20.35. Each method checks a different group of references.
Count full runs with =COUNTIF(I2:I7,"Full"). It should give 3. For a quick calculation using the opening data, the count of Open runs is 3 as well. The eight remaining spaces are spread across those three runs. The coordinator needs both pieces of information. Saying “we have space” does not tell a helper whether a specific run is available. The file works better if the run code, the activity name and the number of remaining spaces stay together through any sort or filter.
Formatting comes last for calculations you have already checked. Format rates and materials costs to two decimal places. Do not alter the original value stored in a rate cell just to change its appearance. Keep registration, capacity and spaces as simple whole-number displays. In the summary area put a text label beside each calculation. An exported or printed view should distinguish an individual run from a total. Check the visible width of the columns and expand the Activity or Status heading if the text is clipped.
Test the worksheet after making a change
Filter the complete table to show rows with Spaces left greater than zero. You should see A1, C1 and B2. Read each activity and registration number against its run code to confirm that the rows stayed together. Sorting the whole table by spaces left can show C1 with 2 and A1 and B2 with 3 each. The order of tied rows can vary with the sort settings. Changing the order of one column alone would destroy the relationship between run, count and activity. Apply the filter or sort across the full table, then check a row whose figures you can recall.
Create a column chart of spaces left by run, using all six run codes and their remaining spaces. If your application’s selection method makes it difficult to use columns A and G together, practise with a small adjacent chart table containing references to both columns. Give the chart a title such as “Unfilled places by practice run” and label the numerical axis “Places”. Three runs have a value of zero. The axis labels and the worksheet make the zero rows identifiable even though the bars have no height. Remove the filter before making the chart if filtered rows would otherwise disappear. A chart titled “All six runs” should let the reader account for each one.
Save a copy for testing before you change the supplied data. In the test copy, change A1’s registration count from 9 to 12 and watch the outputs. A1 must change from Open to Full, its remaining spaces must fall from 3 to 0 and its cost must rise from $3.15 to $4.20. The project total becomes 55 registrations, 5 available places and $21.40 of materials. The count of Full runs rises from 3 to 4. Check the A1 bar. A chart linked to the data should display the new value. A pasted image in a briefing document could still show the earlier total, so refresh or replace it if the exercise asks for current figures.
In the practice copy, test the rule for entering registrations. Set the validation to allow whole numbers from zero to the capacity in the same row, if the spreadsheet permits a cell reference for the upper limit. Apply the rule to each registration cell and verify that it points to the capacity for that row. If the application requires a separate rule for each cell, set each maximum individually for this exercise. Add a prompt such as “Enter a whole-number count from zero to this run’s capacity.” Test 0, the exact capacity and capacity plus one. For the first row the values are 0, 12 and 13. The first two are allowed and the last should display the validation message. This is a practice check for the way you enter data. A pasted range can behave differently across tools, so inspect imported counts before you calculate.
Test an invalid activity code in a separate copy as well. Type RT over the first run’s activity code and read what happens in the lookup cells. Your exact-match formula should show that RT has no match in the reference table. Inspect the source and correct the entry to MT. If a school task asks for a particular message or a list of accepted codes, follow that instruction. A practice habit is to understand the cause of a failed lookup before masking the output. Once the tests are finished, work from the original valid input figures for the rest of this exercise.
Prepare the coordinator’s document from the checked sheet
The document brief is one readable page with an informative title, a short summary, a table of three runs with space and an action paragraph. Use the title “Harbour exhibition capacity note”. The intended reader is the fictional coordinator. Put a footer saying “Practice data” and insert a page-number field if the practice asks for one. Use a heading style or the formatting your teacher specifies to distinguish the document title from the sections. Save the editable document as HarbourBrief.
Write a lead paragraph that ties the total to the decision. One possible answer reads, “There are 52 registrations across six activity runs with a combined capacity of 60. Three runs have space. The estimated materials cost for the registered participants is $20.35.” Check what each number describes. There are 60 places across runs. A participant who registers for more than one activity may contribute more than one registration. The data do not tell us how many distinct people will attend.
Use a small table with headings Run, Activity and Available places. Enter A1, Map Trail, 3; C1, Rhythm Board, 2; and B2, Paper Bridge, 3. If you place the rows in a different order, keep every count attached to its own run. Label the table with the purpose it serves. Check that the table fits inside the page margins and aligns the numbers as a column. A label like “Availability from opening figures” tells the reader which version of the worksheet supports it.
Add an action paragraph. One answer is, “Direct new requests to A1, C1 or B2 according to the visitor’s activity. Recheck each run’s remaining spaces before confirming a group. If requests exceed the eight places still available, compare demand by activity before deciding which additional run to consider.” This advice is limited by the available evidence. The current table does not show how many future requests each activity will attract, so the decision about an extra run remains open.
If the task asks you to insert your chart, use the chart of all six runs and keep its axis and labels readable on the page. You can shorten a text paragraph or change an image’s placement to make more room. Check that the underlying values match the version named in the note. A learner who copies a chart from a test workbook needs to restore the original version before using the answer numbers shown above. If your school task specifies a different layout or asks for a precise placement, give that instruction priority.
Read your document as though it had arrived without the spreadsheet. Could you find the intended decision? Could you find the date, dataset label or other information showing what the figures describe? Does the note say where groups can be sent rather than asking the reader to calculate from raw figures? These questions check the usefulness of the document. Next, read it beside the spreadsheet to check evidence. Fix any mismatch at its source and then bring the latest values into the document. A correct sentence with an out-of-date chart still sends a mixed message.
Task 3. Build a block-based admission checker
Use a block-based program to model two tasks a helper performs. First, enter the activity’s capacity and its current registered count. Second, enter a proposed group size. If the counts are valid and the group fits in the remaining places, show an acceptance message and report the number of places left after admitting the group. If the group is too large, show a message giving the places currently available and leave the registered count unchanged. Save the practice program as HarbourCheck.
For your first build, run the program once with three supplied whole numbers. Use variables named Capacity, Registered and Group size. This version lets you practise selection, arithmetic and an output label. Use a starter project or a simple character from the installed tool. The brief does not require background footage, real visitor information or a link to the spreadsheet. Type in the sample values yourself and compare the result with the worksheet for that run.
Write the order before assembling the blocks. Initialise the variables you will use. Set or ask for capacity. Set or ask for registrations. Set or ask for group size. Confirm that capacity is positive, registered is from zero to capacity, and group size is positive. For this practice, all inputs are supplied as whole numbers. If those checks pass, calculate Remaining as Capacity minus Registered. Check whether Group size is less than or equal to Remaining. If it is, add the group size to Registered and recalculate Remaining. If it is larger, leave Registered alone. Display a message for the branch the program followed.
Work through Run A1 with Capacity 12, Registered 9 and Group size 3. The input counts are valid and there are 3 spaces. The proposed group fits exactly. Add 3 to Registered, which becomes 12, then calculate 12 minus 12 to get zero spaces left. The output can read, “Accepted. Remaining places after this group: 0.” Check that the comparison includes equality. A strictly less-than comparison would reject this valid boundary case.
Next use Capacity 12, Registered 9 and Group size 4. The starting remainder is still 3. The group cannot fit, so the output can read, “Group does not fit. Places currently available: 3.” Registered remains 9. In the program inspect the variable after the run. A correctly worded message can cover up a fault if the program has already updated the registration figure. Put the addition inside the acceptance branch and retest.
Test different reasons for a rejection
Try the following cases one at a time. For 8 capacity, 6 registered and a group of 1, the output should accept and show 1 remaining. For 8 capacity, 8 registered and a group of 1, it should reject with zero available. For 8 capacity, 9 registered and a group of 1, it should flag invalid starting counts. This time it should skip the normal admission decision. A reasonable message is “Check capacity or registered count.” For 10 capacity, 0 registered and a group of 0, it should flag invalid group input. That matters because a group of zero would otherwise pass a comparison with the available spaces while recording no meaningful admission.
Trace the order of the checks when several inputs are invalid. In this workbook, if the starting figures are outside the allowed range, you can report that issue first and end the run. If the capacity and registrations are valid and only the group size is invalid, report the group size. In another exercise the brief may ask for separate messages or require a fixed order. Determine which message each test should trigger from the instructions before you use the program.
The simplest exercise uses numeric inputs you set directly in blocks or key in deliberately. If you later let a user type text, check how the school-approved block environment represents the answer and compares it with numbers. Some inputs might become text automatically and may require a check or conversion that your teacher has explained. Try a normal number, a decimal and an invalid word according to the lesson. For the original controlled practice, keep the whole-number assumption visible so a reader knows what the code is intended to accept.
When two cases produce the same message, compare internal values. A rejection at a full run and a rejection with two places for a group of three both reject the request. The correctly displayed remainder is different. A debug record can show capacity, registered, requested group and available spaces on one line. In an actual saved task, only expose variables and prompts the brief asks the user to see. Temporary labels are useful while working. Check whether the final instructions ask you to hide or remove them before submitting.
Add a short repeated run and trace the state
Extend your practice to a helper at the same activity who receives exactly three group requests in order. Initialise capacity to 10 and registered to 4. Inside a repeat-three loop, read one new size each time, calculate spaces from the current registered count, then apply the same decision. Keep an accepted group’s registrations for the next iteration. At the end display how many participants have been added and how many spaces remain. You can use a list of three known practice inputs in your chosen tool or have a teacher supply the three values separately while you trace.
Use request sizes 3, 4 and 3. At first there are 6 places. Group 3 fits, making the registered count 7 with 3 places remaining. Group 4 does not fit and leaves both values unchanged. The final group of 3 fits exactly, leaving 10 registered and zero places. In total 6 participants were added. Make three rows on paper with Starting registered, Request, Result and Ending registered. The sequence of endings should be 7, 7 and 10. If your program keeps accepting when it should reject, you may have calculated the available places once before the loop and reused the old value. Move that calculation to the beginning of each iteration and check all three rows.
Run the same three requests again from the start. The outcome should be the same. When a second run begins with the previous final figure of 10, an initialisation block may be missing from the start event. Add it in the right place. A different fault resets Registered to 4 inside the loop, making every iteration behave like a fresh activity. Both issues concern the placement of a set block. A trace shows whether a value should persist within one run or be reset between runs. Save the corrected program in the intended folder and reopen it to confirm you edited the file you plan to hand in.
Save proof that your correction worked
A teacher who reviews your work can learn from a short trace even when the final file is correct. Keep a separate practice note with the starting inputs, your expected output and the observed output. For the repeated-run exercise, write 10 as capacity and 4 as the starting count. Record the three requests in order. After correcting the stale remainder bug, compare the ending counts of 7, 7 and 10 with the numbers you predicted. Next choose one input sequence whose first request fails. With requests 7, 2 and 4, the first request leaves the count at 4, the second raises it to 6 and the third fills the run. The final count is still 10, while the trace proves that both code paths behaved correctly.
The same idea works for any file. For the sign, record the small viewing size at which a label was hard to read and what you moved. For the worksheet, keep one value you calculated on paper and compare it after changing the input. For the document, confirm that the final note uses the same run count as its chart. In coursework practice, show the note to the teacher if useful. For a national examination, submit only what the brief permits and requests.
Try an independent version with a different brief
Put the completed original version aside. In a new practice folder, use the invented Northshore activity fair. This time the public sign is portrait and points to two activities rather than three. The two activities are Shadow Shapes at Desk D and Folding Lab at Desk E. Keep a title, two labelled cards and a lower line reading “Check your activity and time with the helper”. Use a separate group for each card. The coordinator wants a one-page note that identifies the least crowded available run and states the total original materials cost. The helper program should accept at most two groups at a particular run. These changes make each file serve a slightly different need.
The reference codes are SS and FL. Shadow Shapes has capacity 9 and a rate of $0.30. Folding Lab has capacity 14 and a rate of $0.45. In four rows enter D1, SS, 9; E1, FL, 8; D2, SS, 5; and E2, FL, 13. Enter the same worksheet headings as before. Build formulas from scratch using only the two new reference rows. Include a count of full runs and a chart of available places for the four run codes. Change the end of each summary range to match the four supplied rows. The important reference is the actual row in which the data end.
For the practice sign, make one abstract sun and screen icon for Shadow Shapes and one simple folded-paper outline for Folding Lab. Use a strong title and ensure that the two cards read top to bottom in the intended order. A previous three-card layout may cover part of the page when pasted into the new file. Start from the intended page shape and consider the space needed before placing the cards. Check that the lower instruction sits fully within the portrait page. Then reopen the editable file and move one grouped card in a test copy to see whether its parts stay attached.
The worked sheet answer is 35 registrations and 46 places, giving 11 spaces. D1 has zero spaces, E1 has six, D2 has four and E2 has one. The cost entries should be $2.70, $3.60, $1.50 and $5.85. The total is $13.65. Check that one run is Full and three are Open. E1 is the least crowded available run by number of spaces, with six places. If “least crowded” means the smallest fraction of its capacity already booked, E1 is 8 out of 14 and D2 is 5 out of 9. D2 then has a slightly smaller proportion booked. In the practice note, write that your recommendation uses spaces available. Clear comparison criteria help a different reader understand how you reached the decision.
For the program, enter E1 with capacity 14 and registered 8. Process groups of 4 and 3 in order. Accept the first, bringing registrations to 12 and leaving two places. Reject the second and retain the two places. Retest with groups of 4 and 2. Both should fit, filling the run exactly. Compare the second prompt’s output with your worksheet value and with the first decision. The worksheet contains the original values. The program changes its state as requests are made. They will agree on starting capacity and registrations, while their later outputs reflect which requests you processed.
Write the new coordinator note. Include the four-run summary, the meaning of “least crowded” for this exercise, and a short statement about the check a helper should run before confirming places. Use “Open runs” as a title for only the rows with space. If you include all four rows, label them all runs. A reader should be able to tell at a glance which data were selected. Save the document with a name that matches the new practice folder. When you reopen it, check one number that is different from the original exercise. If it still says $20.35, find the earlier sentence or chart that you carried over and correct the source.
Rehearse the full two-hour session
Try this session after completing the worked tasks at least once without a timer. The schedule below is for a rehearsal. The school or examination paper can specify a different order or use a different mix of work. For this practice, budget 7 minutes to read and set up, 32 for the media task, 38 for the spreadsheet and document, 28 for the program and 15 for final checks. The five periods total 120 minutes. Choose a timer that helps you notice transitions without interrupting your work. If you are working within a live school practice, use whichever timing method the teacher permits.
During the reading period, identify the output and source for each task. Write the exact file base names and one target check beside each. For the sign, the first check can be that all three desk labels fit on the canvas. For the spreadsheet, use the registration total. For the program, use an exact-fit group. Make a first save for each file as soon as it has useful work. This gives you a recognised destination before time pressure builds.
If you fall behind, compare your progress with the instructions. A media sign may be usable while one icon still needs refinement. If the brief asks for an editable object and an export, protect time for both. In the worksheet, a correct rule copied across the rows is more consequential than a colour adjustment. Work on requirements that complete the task before adding your own visual extras. A student practising for the first time can begin by timing only setup and final checks, then work towards a full run as the tools become familiar.
In the last 15 minutes, open the hand-in folder by its name. Count the required files. Open the worksheet and inspect one formula, one total and chart labels. Read the briefing’s key numbers beside the same version of the worksheet. Open the program and run one agreed test on a copy when the teacher’s practice instructions allow it. Inspect the graphic at a small size and confirm the format. If you find one genuine mismatch, correct it and save again. Keep enough time to confirm that the corrected file is in the folder you intend to submit.
Review your work like a second reader
Ask someone to check a claimed outcome without watching how you built it. You can give them the opening worksheet data and ask how many groups have room. They might say there are three runs with space, which is an answer to a different question from how many groups fit. Ask which group sizes and run codes they would need to decide. Seeing that distinction helps you write a more precise note and design a stronger test for the program.
Run a second check focused on files. Ask a classmate or parent which file they would use to revise the sign and which they would use to read the summary. Confirm they chose the editable graphic and the briefing as intended. Then show them a test chart with four run labels and compare it with the original chart with six. Ask them to identify which worksheet goes with each. A good filename, a clear chart title and a short date or dataset label all help people identify the work.
Write one sentence about a correction and one practice decision for next week. You might say, “I spotted that the second group was accepted even though the first group had used most of the spaces. I moved the subtraction inside the repeat loop and retested the three requests.” The next decision could be to trace an additional rejection or try a new brief with a different boundary. Another student might say, “The summary used the original registration total after I updated the worksheet. I will compare the document and sheet side by side before my final save.” Choose the task you can improve and agree when to check it again.
When you are ready for national examples, use the official specimen links for your applicable examination year and follow your school’s suggested practice. You can also read the Punggol guide to G1 Computing, spreadsheets and Scratch for the wider subject context. The most useful thing to collect from this session is a finished, checkable set of files and a clear explanation of one decision in each.
Compare G1, G2 and G3 subject offers · Compare Secondary 3 subject combinations
