Small Group Tutorials

Here to help students catch up, keep up, and move ahead. Book a consultation here.

Top 100 Secondary 3 G2 Vocabulary List for Punggol | Acids, Bases, Salts and Gas Tests

Three students sit around open books and worksheets at a classroom table, reading, writing and discussing the work together.

Top 100 Secondary 3 G2 Vocabulary List for Punggol: Acids, Bases, Salts and Gas Tests explains acid–alkali language, pH, neutralisation, acid reactions, oxide classification and tests for hydrogen, oxygen and carbon dioxide. The quickest starting point is to know which ions distinguish acids and alkalis: aqueous acids produce H⁺, while alkalis produce OH⁻. Each of 100 selected words below has a plain explanation and an original example that can be used in a Science answer.

For parents, ask the student to state the reactant, the expected product and the observation that supports the conclusion. “The gas made a pop” and “the gas relit a glowing splint” support different identifications. The guide provides organised vocabulary, five worked explanations, twelve practice questions with answers and a focused study routine. It is designed for learners taking the Chemistry component of G2 Science, with no need to perform an unsupervised experiment.

  • Relevant combinations: G2 K223 (Physics/Chemistry) and K225 (Chemistry/Biology); K224 does not contain Chemistry.
  • High-value concepts: ions, pH, neutralisation, acid–metal/carbonate reactions, oxides and the three specified gas tests.
  • Learning materials: 100 numbered terms in ten groups plus worked cases and practice with answers.
  • Syllabus limits: G2 does not require pH calculations from hydrogen-ion concentration or descriptions of preparing pure salts.
  • Source: original eduKate teaching selection based on the publicly available 2027 G2 Science reference, not an official Top 100 list.

Quick access

1. Where these topics fit in G2 Chemistry

The SEAB 2027 G2 Science syllabus includes Acid-Base Chemistry and Qualitative Analysis in its Chemistry component. The outcomes include the ions produced in aqueous acids and alkalis, relative pH and Universal Indicator, characteristic acid reactions, neutralisation, soil acidity, reactions of bases, classification of oxides and identification of carbon dioxide, hydrogen and oxygen. No calculation of pH from hydrogen-ion concentration is required. The description of pure-salt preparation methods is also outside the stated acid–base learning outcomes.

School teaching order may vary, and a learner in Secondary 3 now may sit the SEC in a later year. Check the applicable examination-year document. This article gives supporting terms such as endpoint and limitation to make experiments and reasoning more understandable; they should not be mistaken for a list of 100 separately mandated examination definitions.

2. One hundred terms with original examples

1. Acid and alkali foundations

TermMeaningExample and use
1. AcidA substance that produces hydrogen ions in aqueous solution.Use hydrogen ions when explaining acid properties at G2.
2. BaseA substance that neutralises acids; common examples include metal oxides and hydroxides.A solid base need not dissolve well enough to be an alkali.
3. AlkaliA soluble base that produces hydroxide ions in aqueous solution.Sodium hydroxide is an alkali; insoluble copper(II) oxide is a base but not an alkali.
4. Aqueous solutionA solution in which water is the solvent.The label (aq) differs from (l), which labels a liquid.
5. Hydrogen ionThe H⁺ ion associated with acidic aqueous solutions in the school model.H⁺ reacts with hydroxide ions during neutralisation.
6. Hydroxide ionThe OH⁻ ion associated with alkaline aqueous solutions.Do not confuse OH⁻ with a neutral water molecule.
7. NeutralNot acidic or alkaline under the specified conditions.At 25°C a neutral aqueous solution has pH 7.
8. AcidityHow acidic a solution is, linked to hydrogen-ion availability.Compare relative acidity using the provided indicator colour and pH.
9. AlkalinityThe degree of alkaline character of a solution.A larger pH above 7 at 25°C indicates greater alkalinity on the familiar scale.
10. SolubleAble to dissolve in a specified solvent under stated conditions.Solubility helps distinguish an alkali from a base that is practically insoluble.
Acid and alkali foundations

An acid produces hydrogen ions in water; an alkali produces hydroxide ions. Base is a wider category than alkali.

2. pH and colour evidence

TermMeaningExample and use
11. pHA numerical scale describing acidity or alkalinity.The G2 syllabus does not require calculating pH from hydrogen-ion concentration.
12. Universal IndicatorA mixture of indicators showing a range of colours at different pH values.Use the colour chart supplied with the task to interpret a result.
13. IndicatorA chemical that changes appearance according to conditions such as pH.A colour change is an observation that supports an interpretation.
14. LitmusAn indicator commonly used to distinguish acidic from alkaline solutions.Blue litmus turns red in acidic conditions; red litmus turns blue in alkaline conditions.
15. Indicator paperPaper carrying an indicator that changes colour when contacted by a solution.Compare it to the correct reference chart rather than guessing an exact pH.
16. Colour chartA guide relating indicator colour to a likely pH range.Different indicators may have different colour scales.
17. Acidic solutionAn aqueous solution in which hydrogen ions predominate over hydroxide ions under the school model.A pH below 7 is acidic at 25°C.
18. Alkaline solutionAn aqueous solution with more hydroxide ions than hydrogen ions in the simple model.A pH above 7 is alkaline at 25°C.
19. Relative acidityA comparison of how acidic two solutions are.pH 2 is more acidic than pH 4 at the same temperature and in the usual scale.
20. Approximate pHAn estimated pH based on an indicator reading rather than a direct calculation.Universal Indicator colour generally gives a range or approximation.
pH and colour evidence

Read the provided pH colour chart rather than treating one remembered colour as proof of every solution’s identity.

3. Neutralisation and equation language

TermMeaningExample and use
21. NeutralisationAn acid–base reaction; H⁺ and OH⁻ combine to form water in an acid–alkali reaction.H⁺ + OH⁻ → H₂O shows the ionic change.
22. ReactantA substance present before and consumed in a chemical reaction.In hydrochloric acid plus sodium hydroxide, both are reactants.
23. ProductA substance formed during a chemical reaction.Water and a salt can be products of acid–alkali neutralisation.
24. SaltAn ionic compound formed when replaceable acid hydrogen is substituted by metal or ammonium ions.Sodium chloride is one example, but salts form a much wider class.
25. WaterThe H₂O compound formed through the ionic acid–alkali neutralisation reaction.The water product contains hydrogen and oxygen atoms.
26. Word equationA reaction written with substance names.Acid + alkali → salt + water is a useful category pattern.
27. Symbol equationAn equation using chemical formulae and appropriate coefficients.Choose the right formulae before balancing the equation.
28. Ionic equationAn equation showing the ions directly involved in a reaction.The simple neutralisation ionic equation is H⁺ + OH⁻ → H₂O.
29. Spectator ionAn ion present but unchanged during an ionic reaction description.This is supporting explanation; it helps understand omitted ions.
30. CoefficientA number placed before a formula to balance relative amounts.Changing a coefficient preserves a substance’s chemical formula.
Neutralisation and equation language

Equations describe substances and amounts. The ionic equation clarifies which ions form water in a simple acid–alkali reaction.

4. Reactions of acids

TermMeaningExample and use
31. Acid–metal reactionA suitable acid reacting with a sufficiently reactive metal to form a salt and hydrogen.Magnesium with a suitable dilute acid can produce hydrogen.
32. Acid–carbonate reactionAn acid reacting with a carbonate to form a salt, water and carbon dioxide.Look for carbon dioxide in the product list.
33. Acid–base reactionAn acid reacting with a base, commonly producing a salt and water.Do not assume every base dissolves completely.
34. MetalAn element often capable of losing electrons in chemical reactions.Metal reactivity affects whether it reacts with a particular acid.
35. Reactive metalA metal that readily undergoes appropriate reactions under stated conditions.Compare metals using evidence or the provided reactivity series.
36. Carbonate ionThe polyatomic ion CO₃²⁻.The ion’s charge helps in writing correct carbonate salt formulae.
37. Metal carbonateAn ionic substance containing metal ions and carbonate ions.Calcium carbonate can react with suitable acid to release carbon dioxide.
38. Hydrogen gasA gas with formula H₂, often formed in suitable acid–metal reactions.The standard test involves a lighted splint and a characteristic pop.
39. Carbon dioxide gasThe molecular gas CO₂, often formed in acid–carbonate reactions.Limewater becomes cloudy in the standard carbon dioxide test.
40. EffervescenceVisible bubbling caused by gas escaping from a liquid.Bubbling alone does not identify which gas formed.
Reactions of acids

Bubbles signal gas release but do not identify the gas. Match reactants with a test when the question provides one.

5. Oxides and their properties

TermMeaningExample and use
41. OxideA compound of oxygen with another element.Some oxides react as bases while others have acidic character.
42. Metal oxideAn oxide involving a metal and oxygen.Copper(II) oxide can react with acids as a base.
43. Non-metal oxideAn oxide involving a non-metal and oxygen.Carbon dioxide is a non-metal oxide with acidic properties in water.
44. Acidic oxideAn oxide that reacts with bases or alkalis and shows acidic chemical character.Many non-metal oxides fit this class, but classify the stated substance.
45. Basic oxideAn oxide that reacts with acids to produce salt and water.Copper(II) oxide is a familiar basic oxide.
46. Amphoteric oxideAn oxide that can react with both acids and alkalis.Aluminium oxide is an example; the term does not mean neutral.
47. Neutral oxideAn oxide not displaying typical acidic or basic oxide behaviour.Carbon monoxide is a common example of a neutral oxide.
48. ClassificationPlacing a substance in a category using relevant properties.Use reaction behaviour, not appearance, to classify an oxide.
49. Reaction evidenceAn observation or known chemical result supporting a conclusion.An oxide reacting with an acid alone does not prove it is amphoteric.
50. Chemical characterThe pattern of reactions characteristic of a substance.An oxide can be described by acidic, basic, amphoteric or neutral behaviour.
Oxides and their properties

Classify oxides by their chemical behaviour, not just their names or whether they are white, black or shiny.

6. Gas tests and observations

TermMeaningExample and use
51. Qualitative analysisIdentifying a substance through characteristic chemical or physical observations.A gas test identifies gas type, not automatically its amount.
52. LimewaterA solution of calcium hydroxide used to identify carbon dioxide.A white cloudiness develops when carbon dioxide is passed through under the standard test.
53. White precipitateAn insoluble white solid produced in a chemical reaction.In the carbon dioxide test, calcium carbonate causes the initial cloudiness.
54. Milky appearanceA cloudy white appearance associated with a suspended fine precipitate.Report the observation before identifying the gas.
55. Glowing splintA wooden splint glowing without a flame in the standard oxygen test.Oxygen can relight a glowing splint in the test described.
56. Lighted splintA burning splint used in the standard hydrogen test.Hydrogen produces a characteristic pop in the described test.
57. Characteristic popAn audible result associated with the standard test for hydrogen.It is evidence for hydrogen in the specified test, not the oxygen test.
58. Oxygen gasThe diatomic element O₂ that supports combustion.It is identified in the standard school test by relighting a glowing splint.
59. Test observationWhat the apparatus or material visibly or audibly does.Write ‘limewater turned milky’ before concluding carbon dioxide.
60. Gas identificationSelecting a gas identity using its appropriate test and observation.The G2 qualitative-analysis syllabus specifies carbon dioxide, hydrogen and oxygen.
Gas tests and observations

The test’s apparatus and observation belong together. A glowing splint for oxygen differs from a lighted splint for hydrogen.

7. Soil pH and useful decisions

TermMeaningExample and use
61. Soil acidityAcidic conditions in the soil that may influence plant growth.Explain why managing pH can matter without claiming all plants need the same pH.
62. Soil pHA measurement expressing acidity or alkalinity of soil under a defined testing method.Use a reliable test and its stated conditions before comparing locations.
63. Calcium hydroxideA base that can be used to treat excessive soil acidity.Describe neutralising acidic conditions, not making soil universally perfect.
64. LimingTreatment of acidic soil with a suitable alkaline material.The appropriate amount depends on conditions and should not be guessed.
65. Agricultural applicationUse of scientific knowledge to support crop or soil decisions.Explain benefits and constraints using the actual soil information.
66. Water qualityProperties of water that matter for a stated use.pH is one measure, not an entire safety test.
67. Industrial effluentLiquid waste from a process that may need treatment before discharge.pH control can be one part of broader treatment.
68. CorrosionDamage to material from reactions with its environment.Acidic conditions can affect some metals, but conditions matter.
69. Environmental impactConsequences for ecosystems or people arising from an activity.Relate a proposed pH adjustment to actual evidence and safeguards.
70. Responsible handlingFollowing the appropriate trained and supervised procedures with chemicals.A vocabulary worksheet never authorises unsupervised acid or alkali experiments.
Soil pH and useful decisions

Applying Chemistry to soils is a decision based on measurements and context, not an instruction to add chemicals without assessment.

8. Apparatus and school practical language

TermMeaningExample and use
71. PipetteApparatus for transferring a measured volume of liquid accurately.A pipette is different from a beaker used for rough mixing.
72. BuretteA graduated tube delivering measured volumes of liquid.Read a burette scale carefully from the proper eye position.
73. TitrationA method using measured additions of one solution to another to identify a reaction endpoint.G2 practical guidance includes acid–alkali titration with a given suitable indicator.
74. EndpointThe observed point selected to signal completion of a titration under its indicator conditions.An endpoint is based on a specified observation, not guessing by smell.
75. Initial readingThe apparatus reading at the beginning of a measurement interval.Subtract initial from final for a burette’s volume delivered.
76. Final readingThe apparatus reading at the end of a measurement interval.Read in the same units and use the instrument’s scale direction.
77. TitreThe volume delivered from a burette during a titration.Titre is final reading minus initial reading.
78. MeniscusThe curved surface of liquid in a narrow container.For many clear aqueous solutions, read the bottom of the meniscus at eye level.
79. Measuring cylinderA graduated container used for approximate liquid volume.Choose apparatus precision according to the task.
80. Safety gogglesEye protection used according to supervised laboratory safety instructions.Always follow school procedures for chemical work.
Apparatus and school practical language

In a laboratory diagram, read instrument values using the stated scale and follow supervised procedures.

9. Data, graphs and reasoning

TermMeaningExample and use
81. VariableA factor that may change between conditions or measurements.Temperature and solution concentration can be variables in different investigations.
82. Independent variableThe factor the investigator deliberately changes.When comparing indicator colours, the planned solution is the changed factor.
83. Dependent variableThe outcome observed or measured.A recorded indicator colour is an observation, not a directly measured molecular concentration.
84. Controlled variableA relevant condition kept the same for fair comparison.Use the same indicator and sample volume when comparing solutions.
85. Repeat trialAn additional measurement performed under comparable conditions.Repeat trials reveal variability; they do not automatically eliminate bias.
86. AverageA representative value such as the arithmetic mean of valid readings.Three titres can be averaged when the question’s conditions justify it.
87. PrecisionHow closely repeated measured values agree.Close readings do not alone prove that the apparatus is correctly calibrated.
88. AccuracyCloseness to a true or accepted value.A repeated zero error can make readings precise but inaccurate.
89. AnomalyA result unusually different from others requiring investigation.Do not discard a value merely to improve a preferred conclusion.
90. ConclusionA finding supported by the given observations and conditions.State what was observed and which evidence supports the gas identity.
Data, graphs and reasoning

An investigation is stronger when its comparison, measurement conditions and limitations are stated.

10. Transfer to more challenging questions

TermMeaningExample and use
91. PatternA recurring relationship in observations or results.A colour sequence across pH values follows an indicator’s response pattern.
92. TrendThe general direction of a change across measured values.A pH rise across a table need not be linear in added volume.
93. ComparisonAn explanation of similarities and differences under named conditions.Compare acid and alkali in terms of aqueous ions and indicator response.
94. InferenceA conclusion drawn from evidence rather than direct observation alone.Cloudy limewater supports the presence of carbon dioxide under the standard test.
95. PredictionAn expected observation based on a model and stated conditions.A carbonate with suitable acid is expected to give carbon dioxide.
96. JustificationA reason connecting an answer with evidence or a known concept.Explain why a gas test fits the gas being identified.
97. LimitationA condition preventing a conclusion from going further than the data.One universal indicator colour need not identify the exact acid.
98. Conservation of atomsThe principle that ordinary reactions rearrange atoms without creating or destroying them.Balance an equation by coefficients rather than changing a compound’s formula.
99. MisconceptionAn incorrect understanding that can produce a consistent error.Confusing strong acid with concentrated solution merges two different ideas.
100. CorrectionA revised explanation that repairs an identified mistaken step.Write the ion, reaction and observable result instead of copying a full paragraph.
Transfer to more challenging questions

A correct answer needs the right term, the right causal connection and only the conclusion supported by the evidence.

3. Five worked explanations for common questions

Case 1: base or alkali?

A fictional worksheet names sodium hydroxide solution and solid copper(II) oxide. The student calls both alkalis. Better answer: sodium hydroxide dissolves in water and supplies hydroxide ions, so it is an alkali. Copper(II) oxide reacts with acids as a base but is not sufficiently soluble to count as an alkali in this context. The word base describes a broader class than alkali.

Case 2: neutralisation does not mean equal volumes

An acid and alkali are mixed, and the student says the solution is neutral because equal volumes were used. Better answer: H⁺ and OH⁻ form water in neutralisation, but equal volumes need not contain equal reacting amounts. Without suitable concentration and other information, the final pH cannot be inferred from the volumes alone. G2 here uses the pH and indicator evidence provided, not hydrogen-ion concentration calculations.

Case 3: distinguish two gases produced by reactions

A reported reaction produces bubbles and a student immediately names oxygen. Better answer: bubbling only shows gas being released. In the standard school procedure, hydrogen gives a pop with a lighted splint; carbon dioxide makes limewater milky; oxygen relights a glowing splint. A correct conclusion needs the appropriate test and observation, not bubbling alone.

Case 4: identify an oxide class from its reaction behaviour

A diagram describes an oxide reacting with both an acid and an alkali in suitable conditions. Better answer: this supports the oxide being amphoteric. An oxide reacting only with an acid is not yet shown to be amphoteric. Do not confuse the word neutral with amphoteric: their behaviour differs.

Case 5: a simple titration reading

A fictional burette diagram gives an initial reading of 1.40 cm³ and a final reading of 24.80 cm³. The titre is 24.80 − 1.40 = 23.40 cm³. The titre is the delivered volume, not the final scale reading. One titre does not establish an unknown concentration unless appropriate chemical and concentration information is supplied. This is a paper-based apparatus-reading exercise, not a home titration instruction.

4. Twelve practice questions with explained answers

1. An aqueous solution has an acidic indicator response. Which ion is central to the school acid definition?

Answer: Hydrogen ion, H⁺. A separate pH calculation is not required for this identification.

2. Is every base an alkali?

Answer: No. Alkalis are soluble bases producing OH⁻ in aqueous solution; not every base is soluble.

3. What are the simple ionic reactants and product in acid–alkali neutralisation?

Answer: H⁺ + OH⁻ → H₂O. The ions combine to produce water.

4. A student changes the subscript of H₂O to balance an equation. What is wrong?

Answer: Changing subscripts changes the substance. Adjust appropriate coefficients instead while keeping correct chemical formulae.

5. An acid reacts with a carbonate. Which gas may form?

Answer: Carbon dioxide, alongside salt and water in the standard acid–carbonate pattern.

6. What does effervescence establish on its own?

Answer: Gas is being released. It does not identify hydrogen, oxygen or carbon dioxide without more evidence.

7. Which observation identifies oxygen in the standard school gas test?

Answer: A glowing splint relights. A pop with a lighted splint is associated with hydrogen instead.

8. Which gas makes limewater initially appear milky in the standard test?

Answer: Carbon dioxide. The milkiness results from formation of a white precipitate.

9. An oxide reacts with both acids and alkalis. How is it classified?

Answer: Amphoteric oxide. A single acid reaction alone would not be enough to establish this.

10. Why does equal volume of acid and alkali not guarantee pH 7 after mixing?

Answer: The reacting amounts depend on concentration and chemical relationship, not simply the two volumes.

11. A burette starts at 2.10 cm³ and ends at 19.60 cm³. Calculate its titre.

Answer: 19.60 − 2.10 = 17.50 cm³. Use the difference between final and initial readings.

12. A student says a pH of 3 identifies hydrochloric acid uniquely. Why is this wrong?

Answer: pH describes acidity; different acids and concentrations can give the same pH. Additional information would be needed to identify a particular acid.

All examples and numerical readings in this practice section are fictional eduKate exercises. They are not official SEAB examination questions, and laboratory gas testing should never be replicated without proper school supervision.

5. A focused learning and parent-support routine

Begin with a short comparison sheet: acid, base, alkali and salt. For every word, ask what it is and what observation or reaction would demonstrate its role. Next, contrast acid–metal with acid–carbonate reactions. Keep the reactant names separate from any gas-test evidence. The aim is for the student to build one correct explanation, not memorise entire pages at once.

Use a ten-minute paper exercise: give three reactions and three supplied gas-test observations, and ask the student to match the correct gas and explain why. Then show a basic titration diagram and ask for one volume calculation. If the correct test is selected but the observed result is reversed, revise the test distinction. If the test is correct but the conclusion overstates what is known, practise evidential limits.

Parents can ask “What was actually observed?”, “Which gas test was used?”, “Does the answer name an ion, a substance or a reaction?”, and “What does the result not establish?” The questions make the gap more precise. Practical use of reagents and apparatus belongs with teachers or trained personnel, and school safety rules take priority over home experimentation.

For earlier foundations, see Particles, Reactions and Materials. For the other Chemistry combinations and subject planning, see the official 2027 G2 subject index.

6. Official references and the teaching boundary

References checked 17 November 2026. The selected 100 terms, explanations, practice questions and fictional results are independently written eduKate teaching material. They are not a government vocabulary ranking, a replacement for the examination-year syllabus or a supervised laboratory manual.

Continue from here: Start Here · Tuition · Education · Pathways · Parenting 101 · All Site Routes

eduKate Punggol

Contact

83 Punggol Central, Singapore 828761

edu|Kate Bukit Timah

8 Fourth Avenue, Singapore 268674

By Appointment +65 8823 1234
admin@edukatesg.com

Email Us

When a child finally understands, school becomes less frightening and the future opens wider. Email us for the latest schedules and fees.