Small Group Tutorials

Here to help students catch up, keep up, and move ahead. Book a consultation here.

Top 100 Secondary 1 G3 Vocabulary List for Punggol | Mathematics: Ratios, Percentages, Rates and Speed

Three students sit around open books and worksheets at a classroom table, reading, writing and discussing the work together.

Secondary 1 G3 Mathematics becomes more reliable when a student can tell a ratio from a fraction of the whole, name the base of a percentage, and convert a rate without losing its units. This Top 100 Secondary 1 G3 Vocabulary List for Punggol teaches ratios, percentages, proportional reasoning, rates and average speed with precise definitions, original examples and warnings about mistakes that often produce convincing but wrong answers.

Parents can begin with one marked Mathematics problem and ask which quantities are being compared and what the original 100% represents. The MOE 2020 G2/G3 Mathematics syllabus places ratios, percentages (including reverse percentages and percentage points), average rates and speed in G3 Secondary One. These 100 learning terms are selected and explained by eduKate, not an official national Top 100 or a separate Secondary 1 SEAB examination. The Numbers, Algebra and Problem Solving vocabulary guide provides a broader companion.

  • 100 terms: ten grouped tables, each with a definition, illustration and common confusion.
  • Skills: simplify ratios; partition totals; compare percentage change; reverse a discount; convert speed units.
  • Critical distinctions: part-to-part versus part-to-whole, percentage change versus percentage point, total distance versus average speed.
  • Examples: fully worked ratio partition, linked ratios, discounts, successive changes and travel problems.
  • School context: follow the current G3 school chapter and supplied assumptions rather than an invented exam prediction.
  • Revision: explain the relationship before substituting numbers, then test a changed case.

Choose your learning route

1. Match vocabulary to the learner’s starting position

Ratio, percentage and rate all compare quantities, but they answer different questions. A ratio 3:5 can compare two groups; a percentage can express the share of a whole; a rate can compare different kinds of units, such as kilometres and hours. Knowing which relationship the question describes is more valuable than memorising isolated calculator steps.

The G3 Secondary One syllabus explicitly includes ratios involving rational numbers, simplification and problem solving, percentage change and reverse percentage, percentage points, average rates, constant and average speed, plus rate-unit conversion. Schools may sequence these lessons differently. Do not present additional finance or science examples as compulsory examination contexts; they are teaching applications of those mathematical ideas.

A useful ten-minute diagnosis asks the child to simplify 12:18, split $64 in a ratio 3:5, explain why a 20% decrease after a 20% increase does not return the starting value, and convert 72 km/h into m/s. Four different mistakes suggest four different repairs: common-factor control, part allocation, base selection or measurement conversion.

2. The complete 100-term ratio, percentage and rate list

These entries are grouped to build connected mathematical language. The examples use invented figures and no live prices or exchange rates. Cover the explanations, create another valid case, and explain why the tempting error is wrong.

1–10: Reading and simplifying ratios

No.TermMeaningOriginal exampleAvoid this mistake
1ratioA comparison of quantities by division in a specified order.Three red pens to five blue pens is 3:5.Order matters: 5:3 is a different comparison.
2quantityAn amount expressed with a relevant unit.Twelve litres is a quantity.Do not compare unlike units without conversion.
3ratio termOne number occupying a position in a ratio.In 3:5, three is the first term.A term is not automatically a count of objects.
4ratio orderThe sequence in which quantities are compared.A:B=2:3 differs from B:A=2:3.Read the names before writing numbers.
5common unitA shared unit used before comparing quantities.Convert 2 m and 50 cm to cm.2:50 is not the ratio of 2 m to 50 cm.
6equivalent ratiosRatios that express the same comparison.2:3 and 6:9 are equivalent.Multiply or divide all terms by the same factor.
7simplest ratioAn equivalent ratio with whole-number terms sharing no common factor beyond one.12:18 simplifies to 2:3.Simplest form depends on the given numeric types.
8greatest common factorThe largest whole number dividing given integers.GCF(12,18)=6.Use the common factor on both ratio terms.
9rational numberA number expressible as a fraction of integers with nonzero denominator.One-half and 0.75 are rational.Ratio terms may initially involve fractions or decimals.
10part-to-part comparisonA ratio comparing one part of a set with another part.Boys:girls=3:4 compares two groups.Do not mistake it for a fraction of the whole.
Reading and simplifying ratios — proportional reasoning examples

11–20: Shares, parts and combined relationships

No.TermMeaningOriginal exampleAvoid this mistake
11part-to-whole relationshipA comparison of one component with the complete total.Three blue pens among eight are 3/8 of all pens.A ratio 3:5 refers to two parts, total eight.
12total partsThe sum of the numerical parts of a ratio.In 3:5 there are eight equal ratio parts.The sum is not necessarily eight actual objects.
13unit partThe amount represented by one part of a ratio.If eight parts equal $64, one is $8.Divide the total by the correct number of parts.
14allocated shareThe portion of a total assigned using a ratio.Three parts at $8 each equal $24.Check the amount belongs to the named party.
15ratio partitionSplitting a quantity according to a stated ratio.$64 in 3:5 produces $24 and $40.Both shares must sum to the total.
16ratio differenceSubtracting corresponding part values to compare quantities.The gap between 3 and 5 parts is two parts.Difference of parts differs from total parts.
17common ratio termA term representing the same named quantity in linked ratios.Match B in A:B and B:C.Do not combine unmatched scales directly.
18combined ratioA ratio connecting three or more quantities consistently.A:B=2:3 and B:C=4:5 yield A:B:C=8:12:15.The middle quantity must use the same scale.
19fraction of the wholeAn individual share divided by the total.Three parts of eight are 3/8.Use the sum of all parts as denominator.
20remaining shareThe part left after another portion is assigned.After $24 of $64, $40 remains.A remainder is not the same as a percentage point.
Shares, parts and combined relationships — proportional reasoning examples

21–30: Proportional reasoning and scaling

No.TermMeaningOriginal exampleAvoid this mistake
21proportionAn equality between two ratios or comparable fractions.2/3=8/12.A single ratio alone is not an equation of proportion.
22direct proportionA relationship where two quantities keep a constant ratio.At a fixed price, cost grows with quantity.An increase alone does not establish direct proportion.
23scale factorThe multiplier connecting corresponding quantities.Multiply 2, 3 and 5 by four.Use the same factor on every corresponding term.
24multiplierA number by which a quantity is multiplied.A multiplier of 1.5 increases an amount by 50%.A multiplier is not necessarily an additive change.
25multiplicative relationshipA relationship expressed by multiplying, rather than adding.Cost=3×number of items.Do not add a fixed amount if scaling is required.
26unitary methodFinding one unit’s value before scaling to another amount.$18 for six items means $3 per item.Check whether the relationship stays proportional.
27equivalent fractionA fraction made by scaling numerator and denominator equally.2/5 equals 6/15.Do not change only the numerator.
28ratio tableA table of linked quantities with consistent scaling.Two pens cost $5, four cost $10.Check conditions such as fixed unit price.
29proportion equationAn equation connecting two equivalent ratios.x/6=5/3 gives x=10.Match corresponding quantities correctly.
30constant ratioA fixed quotient between directly proportional variables.Distance/time is constant at constant speed.A constant difference is not a constant ratio.
Proportional reasoning and scaling — proportional reasoning examples

31–40: Percentage language and bases

No.TermMeaningOriginal exampleAvoid this mistake
31percentageA comparison stated as an amount per hundred.25% means 25 out of every 100.A percentage requires a meaningful base.
32percent signThe symbol % meaning per hundred.40% equals 40/100.It does not mean a fixed number of objects.
33percentage baseThe quantity treated as 100% in a comparison.If 20 is 25% of 80, 80 is the base.Wrong bases lead to wrong percentages.
34percentage of a quantityThe part found by multiplying a base by a percentage.15% of 80 equals 12.Convert the percentage to a fraction or decimal.
35fraction formA ratio represented by numerator and denominator.25%=1/4.A denominator must not equal zero.
36decimal formA number written using place value and a decimal point.37.5%=0.375.Divide percent by 100 to obtain decimal form.
37percentage pointThe arithmetic difference between two percentage values.30% to 36% is six percentage points.It is not a 6% relative rise.
38percentage increaseA rise measured relative to the original quantity.100 to 120 is a 20% increase.Divide the change by the original base.
39percentage decreaseA fall measured relative to the original quantity.100 to 80 is a 20% decrease.Use the starting amount as the base.
40percentage above 100A percentage representing more than the chosen base.150% of 40 equals 60.Values over 100% are possible and meaningful.
Percentage language and bases — proportional reasoning examples

41–50: Reverse and successive percentages

No.TermMeaningOriginal exampleAvoid this mistake
41original valueThe amount before a stated change.The undiscounted price was $80.Identify the original before reversing a change.
42final valueThe amount after the specified changes.A 15% discount makes $80 become $68.A final amount is not always the original base.
43percentage multiplierThe decimal factor used to apply a change.A 20% increase uses 1.2.A decrease uses a factor below one.
44reverse percentageFinding an original amount from a changed amount and rate.$68 after 15% off implies $80 originally.Divide by 0.85, not by 0.15.
45discountA reduction from a stated price.15% off $80 removes $12.Identify whether further fees apply.
46marked priceThe listed price before any applicable discount.A tag displays $80.Marked price is not necessarily the paid price.
47selling priceThe price charged for the item.After a discount, the price is $68.Read whether taxes or fees are included.
48mark-upAn increase from a chosen cost or base.A shop marks $50 cost up by 20% to $60.Mark-up and margin have different bases.
49successive changesPercentage operations applied one after another.Two 10% discounts leave 81% of the original.Do not simply add rates for exact net effect.
50net percentage changeThe overall change relative to the initial value.100 rises to 120 then falls to 96, net -4%.Equal rise and fall percentages do not cancel.
Reverse and successive percentages — proportional reasoning examples

51–60: Rates, distance and speed

No.TermMeaningOriginal exampleAvoid this mistake
51rateA comparison of two quantities with possibly different units.Ten pages per hour is a rate.Specify numerator and denominator units.
52unit rateA rate expressed per one unit of the denominator.$12 for three drinks equals $4 per drink.Not every rate measures speed.
53average rateTotal change or quantity divided by total relevant interval.150 km in three hours averages 50 km/h.Do not average component rates blindly.
54speedDistance travelled per unit time in the chosen context.60 kilometres per hour is a speed.Speed is scalar, unlike velocity.
55average speedTotal distance divided by total elapsed time.120 km in three hours gives 40 km/h.Use total time including stated stops.
56constant speedSpeed that remains the same during the interval.A vehicle covers equal distances in equal times.Direction can change despite constant speed.
57distanceHow far an object travels along its path.A path covers 12 kilometres.Distance differs from straight-line displacement.
58elapsed timeThe duration between start and finish.10:30 to 11:15 is 45 minutes.Convert to consistent units.
59rate conversionChanging a rate to another equivalent unit.72 km/h equals 20 m/s.Convert distance and time units together.
60speed formulaA relationship linking distance, time and average speed.Speed=distance/time.Rearrange with units; do not multiply blindly.
Rates, distance and speed — proportional reasoning examples

61–70: Real-world proportional applications

No.TermMeaningOriginal exampleAvoid this mistake
61unit priceA cost per one item or measurement unit.Six markers for $18 cost $3 each.Compare equivalent quantities and conditions.
62total costCombined price of all relevant items.Four $3 markers cost $12.Exclude or include fees as directed.
63recipe ratioRelative ingredient quantities in a mixture.Rice:water=1:2 in an invented recipe.Not every practical recipe scales perfectly.
64ingredient quantityThe amount of one component in a mixture.Three cups of rice require six cups of water at 1:2.Preserve matching units or convert.
65map scaleThe relation between mapped distance and real-world distance.1:50,000 means 1 cm represents 500 m.Scale refers to lengths, not areas unchanged.
66scale drawingA representation whose measurements follow a fixed scale.A diagram of a room uses 1:100.Do not assume printed images retain scale.
67currency unitThe money denomination used in a calculation.Both prices are expressed in Singapore dollars.Do not apply an invented live exchange rate.
68flow rateVolume or quantity passing per unit time.Two litres per minute fill six litres in three minutes.Flow need not remain constant in real systems.
69consumption rateAmount used per unit of activity or time.A device uses a fixed resource rate in a model.Actual consumption can vary.
70productivity rateOutput per worker, machine or period under a specified measure.Twelve boxes in three hours means four boxes/hour.Quality and conditions can affect comparisons.
Real-world proportional applications — proportional reasoning examples

71–80: Approximation and checking units

No.TermMeaningOriginal exampleAvoid this mistake
71estimationFinding a reasonable approximate magnitude.Round 198 to 200 for a quick check.An estimate is not the exact answer.
72roundingExpressing a value to a chosen precision.7.246 becomes 7.25 to two decimal places.Round only as required by the question.
73significant figuresDigits showing the precision of a value.0.00456 has three significant figures.Leading zeros are not significant.
74decimal placesNumber of digits after the decimal point.3.14 has two decimal places.Decimal places and significant figures differ.
75unit consistencyExpressing related quantities in compatible units.Convert 150 cm to 1.5 m before a ratio.Mixed units can corrupt ratios.
76common denominatorA denominator used to compare or combine fractions.1/2 and 1/3 become 3/6 and 2/6.Use it when required by the operation.
77fraction conversionChanging between forms while preserving value.3/4 equals 0.75 or 75%.Representation changes but value stays.
78calculator checkUsing technology to verify arithmetic and inputs.Confirm 68/0.85=80.A calculator does not select the correct base.
79reasonablenessWhether a result fits the problem’s quantities and conditions.A discounted price normally does not exceed its original without fees.Check assumptions before rejecting a result.
80dimensional checkUsing units to test whether a calculation makes sense.km divided by h yields km/h.Units cannot validate the entire reasoning by themselves.
Approximation and checking units — proportional reasoning examples

81–90: Common reasoning mistakes

No.TermMeaningOriginal exampleAvoid this mistake
81additive errorUsing addition where the relationship requires multiplication.Scaling 2:3 to 4:6 multiplies both terms.Adding two to both terms gives 4:5, not equivalence.
82wrong percentage baseUsing the wrong quantity as 100%.A rise from 80 to 100 is 25%, not 20%.Name the original or comparison base.
83inverted ratioReversing the stated order of comparison.A:B=3:4 is not 4:3.Recheck the order of names.
84mixed-unit errorComparing measurements without common units.200 cm:1 m is 2:1.Convert before simplifying.
85rate-unit omissionPresenting a rate without its denominator unit.Answer $4 per item, not just $4.Units often express the relationship.
86double countingIncluding the same share or interval more than once.One segment cannot be added twice to total distance.Trace the components carefully.
87division by zeroAttempting a quotient with zero denominator.Speed cannot be determined from distance/0 time.Check whether the input describes a valid interval.
88false proportionalityAssuming a constant ratio where other charges apply.Taxi fares with a fixed flag-down fee are not directly proportional to distance.A straight increase can include fixed costs.
89percentage cancellation errorAssuming an equal rise and fall restores the initial value.100→120→96 after +20% then -20%.Later percentage uses the changed base.
90scale misunderstandingInterpreting a length scale as an unchanged area factor.Doubling lengths makes area four times in similar figures.Scale dimensions separately.
Common reasoning mistakes — proportional reasoning examples

91–100: Reasoning and explaining the answer

No.TermMeaningOriginal exampleAvoid this mistake
91given informationQuantities and conditions supplied in the question.The total is $64 and ratio is 3:5.Do not invent a missing condition.
92unknown quantityThe value that must be found.Let x represent one ratio part.Define x clearly before calculating.
93relationshipThe mathematical connection between named quantities.A:B=2:3 links the two shares.The relationship determines the operation.
94equationA statement showing equal quantities or expressions.3x+5x=64.Keep both sides balanced.
95substitutionReplacing a symbol with a known value.If x=8, then 3x=24.Check that the assigned value matches its meaning.
96comparison statementA sentence explicitly naming the compared values.A is 25% larger than B.Name the base rather than relying on “more”.
97explanationA reason showing why a step follows.Eight equal parts divide $64 into $8 each.Do not substitute a memorised phrase for logic.
98verificationTesting a result against the original conditions.24+40=64 and 24:40=3:5.One check may not detect every mistake.
99transferApplying the same relationship to new data.Partition $96 in ratio 3:5 after solving $64.Understanding should survive changed numbers.
100conclusionA final answer that includes quantity and suitable units.“The first share is $24.”A number without its referent can be ambiguous.
Reasoning and explaining the answer — proportional reasoning examples

3. Work with ratio parts rather than guessing shares

Worked example 1: partition $64 in the ratio 3:5

A and B share $64 in the ratio A:B = 3:5. The total number of equal ratio parts is 3+5=8. Each part is $64 ÷ 8 = $8. Therefore A receives 3×$8 = $24 and B receives 5×$8 = $40. Both the total and the ratio check: $24+$40=$64, and 24:40 simplifies to 3:5.

Do not treat 3:5 as the fraction 3/5 of the total for A. That fraction compares A with B. A’s fraction of the whole is 3/(3+5)=3/8. That distinction is the point of the problem. To transfer it, try a new total of $96: one part is $12, giving shares of $36 and $60.

Worked example 2: three quantities with a shared middle term

Suppose A:B=2:3 and B:C=4:5. To connect them, make B the same numerical size in both ratios. The least common multiple of 3 and 4 is 12. Multiply the first ratio by four to get A:B=8:12. Multiply the second by three to get B:C=12:15. Therefore A:B:C=8:12:15.

Adding the separate ratios as 2:3:5 is invalid because the two middle quantities B are measured with incompatible ratio parts. The equality B=12 reconciles the two scales. If A+B+C totals $70, there are 35 equal parts, each worth $2. The shares are $16, $24 and $30. Again, verify both original pairwise ratios.

Worked example 3: when a ratio is not direct proportion

A fictional store charges $3 per marker with no other fees. Two markers cost $6 and four cost $12, so quantity and total cost have a constant ratio. But if the store charges a separate flat $5 delivery fee, two markers cost $11 and four cost $17. Doubling the marker count no longer doubles the total payment. State the exact assumptions before calling a relationship directly proportional.

4. Percentages, reverse percentages and percentage points

Worked example 4: reversing a discount

A fictitious bag sells for $68 after a 15% discount from the original marked price. The selling price represents 85% of the original, so if the original is x, 0.85x=68. Dividing gives x=68/0.85=$80. Check: fifteen percent of $80 is $12, and $80−$12=$68.

Dividing $68 by 15% is wrong because $68 is not the discount amount. The key word is after: the final value is the remaining 85%. Reverse percentages are an exercise in identifying the base. The same thinking works for price rises: after a 25% increase, the final amount represents 125%, so divide by 1.25 to recover the original.

Worked example 5: percentage points versus percentage increase

In an invented report, the fraction of pupils choosing a club rises from 30% to 36%. The increase is six percentage points. Relative to the original 30%, the percentage increase is 6/30×100%=20%. Saying “the increase is 6%” without identifying the kind of comparison can be misleading. Always state whether the difference is in percentage points or a relative percentage change.

Worked example 6: equal percentage rise and fall do not cancel

A quantity of 100 rises by 20% to 120. A subsequent 20% decrease is calculated on 120, so it falls by 24 to 96. The net change is a 4% decrease from 100. Multipliers make the reason clear: 1.20×0.80=0.96. The bases differ, so 20% minus 20% is not the correct method.

The order of two given proportional multipliers does not change their product, but the original and later percentage changes still relate to different values. A student should record each new base. When rates are applied successively, multiplying the remaining fractions is safer than simply adding or subtracting rates.

5. Rates and speed: keep the denominator visible

Worked example 7: average speed from an entire trip

An invented trip covers 150 km over three hours in total. Average speed is total distance divided by total elapsed time: 150/3=50 km/h. If the journey includes a 30-minute stop within those three hours, the stop still contributes to the total elapsed time. Averaging two segment speed numbers without considering segment durations can produce a wrong overall result.

Worked example 8: convert km/h into m/s

At 72 kilometres per hour, the distance is 72,000 metres in 3,600 seconds. Divide: 72,000/3,600=20 metres per second. Equivalently divide 72 by 3.6. The result 20 must carry the unit m/s. Multiplying or dividing a speed value without converting both distance and time can leave a plausible-looking but incorrect answer.

To convert back, 20 m/s × 3.6 = 72 km/h. Show the reasoning at least once. A calculator shortcut is useful only when the student knows why the conversion factor works. Recognise that speed gives distance per time; it does not specify which direction the traveller is heading.

Worked example 9: a unit price comparison

One fictional packet contains four markers for $10. Another contains six markers for $18. The first unit price is $2.50 per marker; the second is $3 per marker, so the first is cheaper per marker under the stated conditions. The packet with the larger total quantity is not automatically better value. An answer should also acknowledge if quality, size or fees differ, because then a fair comparison requires more information.

6. Common traps and how to repair them

Start by asking the child to name the quantity used as the base. A rise from 80 to 100 is a change of 20 relative to 80: 20/80=25%. The same difference of 20 relative to 100 is 20%, but that answers a different question. The word from usually identifies the original base in an increase or decrease problem.

A ratio of 200 cm to 1 m is not 200:1 in simplest form. Convert one metre to 100 centimetres first: 200:100=2:1. Check the unit before dividing the ratio terms. This is especially important when comparing lengths, capacities, prices or rates expressed with different scales.

A speed of 45 with no unit is incomplete if the question asks for km/h or m/s. A result of “12” without saying twelve pupils, litres or dollars can also hide a wrong interpretation. Writing the target in words before calculating helps a student select the formula and include the right unit in the conclusion.

Use a visual check for direct proportion: if x=0 while y remains at a nonzero fee, the relation y=kx cannot hold over the stated domain. A constant added amount changes a direct proportion into a different relationship. The learner should identify the fixed charge rather than scaling every number.

7. Original practice questions and reasoned answers

These exercises are original teaching questions with invented amounts and conditions. They are not SEAB examination items, a national Secondary 1 paper, or estimates of current Singapore consumer prices.

Practice 1

Simplify the ratio 18:24.

Answer and explanation: 3:4; divide both terms by the greatest common factor, six.

Practice 2

Express 2 m : 50 cm in simplest form.

Answer and explanation: 200 cm : 50 cm = 4:1. Convert to a common unit first.

Practice 3

A:B=3:5 and the total is $64. Find A.

Answer and explanation: A is $24. Eight parts equal $64, so one part is $8 and A has three.

Practice 4

A:B=2:3 and B:C=4:5. Find A:B:C.

Answer and explanation: 8:12:15 after matching both values of B to twelve.

Practice 5

Find 15% of $80.

Answer and explanation: $12. Multiply 80 by 0.15.

Practice 6

A $100 item rises by 20%, then falls by 20%. Find the final value.

Answer and explanation: $96. Multiply 100×1.2×0.8; the second percentage uses the changed base.

Practice 7

A final price of $68 follows a 15% discount. Find the original price.

Answer and explanation: $80, because 68 is 85% of the original, and 68/0.85=80.

Practice 8

A percentage rises from 30% to 36%. State the percentage-point increase.

Answer and explanation: Six percentage points; the relative increase is 20%.

Practice 9

Convert 72 km/h to m/s.

Answer and explanation: 20 m/s; divide by 3.6 or convert 72,000 m per 3,600 s.

Practice 10

A trip covers 150 km in 3 hours, including stops. Find average speed.

Answer and explanation: 50 km/h based on total distance and all elapsed time.

Practice 11

Six identical items cost $18. Find the unit price.

Answer and explanation: $3 per item under the stated fixed-price assumption.

Practice 12

A car rental costs $40 plus $10 per hour. Does cost vary directly with hours?

Answer and explanation: No, because at zero hours there is still a fixed $40 charge. Cost is 40+10h.

8. A manageable Punggol home-learning routine

Use three related words from the school chapter, not all one hundred. In one short session the student reads a ratio and explains its parts. In the next they allocate a total and check both the sum and the ratio. In a later session they practise a percentage with the base changed. The final check is an unfamiliar question after a gap, without looking at the model solution.

For a child who loses control of fractions, use small whole-number examples first and gradually introduce rational-number terms. For a child who handles procedures but makes interpretation errors, ask them to explain the sentence before solving it. For a learner ready for greater depth, introduce linked ratios, successive percentage changes and fair unit-price comparisons with changed conditions.

A proposed 3-pax discussion can assign one learner to name the comparison, a second to calculate and a third to challenge the base or unit. Rotate the roles, then require individual solutions to a new case. The group structure is a teaching illustration, not a statement about available seats, fees or guaranteed improvement.

9. Questions and primary sources

Are reverse percentages and percentage points really Secondary 1 G3 topics?

Yes. Both appear in the Secondary One G3 section of MOE’s 2020 Mathematics syllabus, alongside ratio, rates and speed. Actual school sequencing and the depth of practice can vary. The original list here is not the official wording of 100 required terms.

Can a child use a calculator immediately?

A calculator can check arithmetic, but it cannot determine whether $68 represents 85% or 15% of the original price. Ask the child to name the relationship and base first. After that, technology is useful where permitted by the task.

Does a wrong answer mean the entire subject is weak?

Not necessarily. A wrong answer can arise from one specific stage: failing to convert units, reversing a ratio, selecting an incorrect percentage base or omitting a rate denominator. A focused correction and changed example give more useful evidence than a general label.

Official and related reading

All values, examples and exercises are original hypothetical teaching material. This list is not a prescribed national word bank or a claim about a Secondary One national examination. Build the next lesson around the student’s most recent school question and test whether the reasoning works on different numbers.

Continue from here: Start Here · Tuition · Education · Pathways · Parenting 101 · All Site Routes

eduKate Punggol

Contact

83 Punggol Central, Singapore 828761

edu|Kate Bukit Timah

8 Fourth Avenue, Singapore 268674

By Appointment +65 8823 1234
admin@edukatesg.com

Email Us

When a child finally understands, school becomes less frightening and the future opens wider. Email us for the latest schedules and fees.