Small Group Tutorials

Here to help students catch up, keep up, and move ahead. Book a consultation here.

Top 100 Secondary 4 G3 Vocabulary List for Punggol | Physics Small Groups Tuition

Secondary 4 G3 Physics vocabulary helps students read questions accurately, select the right relationship and explain what a result means. This Top 100 Secondary 4 G3 Vocabulary List for Punggol brings together measurement, forces, energy, thermal physics, waves, electricity and radioactivity for students preparing for the 2027 SEC G3 Physics syllabus, K323. Each entry gives a clear meaning and a short application so revision can move from recognising a word to using it.

Start with the terms that caused difficulty in a recent school assignment, then practise explaining a fresh example without looking at the list. Parents can use the worked tasks below to distinguish a vocabulary gap from a calculation or reasoning gap, and to judge whether independent practice, school clarification or small groups tuition would help. These 100 words and multiword terms are an eduKate teaching selection, not an official SEAB list, examination prediction or promise of a particular grade.

  • Level and scope: Secondary 4 revision for standalone G3 Physics K323, including foundations learned earlier in secondary school.
  • What is included: exactly 100 selected terms, ten topic groups, common confusions, worked examples and independent practice with answers.
  • How to study: explain the meaning, state the relevant quantity or condition, apply it, then check the reasoning.
  • For parents: inspect the student’s explanation and a fresh attempt, alongside school feedback.
  • Small groups: a three-student discussion can make each student’s reasoning visible when tasks and feedback are well chosen.
  • Year check: this guide uses the 2027 SEC syllabus; use the correct examination-year document for your own entry.

Choose your next revision step

Start with the question you need to answer today, then continue through the full guide.

Full contents

Understand and learn
  1. What this Physics vocabulary list is designed to do
  2. The 100 Physics words and terms
  3. The distinctions that change an answer
Apply and revise
  1. Worked examples: turning vocabulary into reasoning
  2. Independent practice with answer discussions
  3. A four-week revision route that stays manageable
Plan support and check sources
  1. What to look for in Physics small groups tuition
  2. Questions students and parents often ask
  3. Official references and further reading

CHAPTER 1 OF 9

eduKate Punggol Science Tuition · 11-second introduction

What this Physics vocabulary list is designed to do

Back to contents

This page can be used as a Secondary 4 revision checkpoint: attempt the diagnostic questions, use the result-to-action table to select a repair, and return for a fresh check after practice. For a wider reference while revising, keep the 200-term G3 Physics reference available alongside your school notes.

A student can recognise the word power yet use an energy formula when the question asks for a rate. Another may calculate a correct number for speed but describe a direction-dependent quantity as velocity without checking the journey. In both cases, knowing a definition is only the beginning. The useful question is whether the word changes the student’s next action.

The SEAB 2027 G3 school-candidate index identifies standalone Physics as K323. Combined Science with Physics has separate entries, so families should check the exact subject on the school record. The K323 syllabus covers measurement, mechanics, thermal physics, waves, electricity and magnetism, and radioactivity. This guide selects useful language from those areas without claiming to reproduce the complete syllabus.

SEAB states that the SEC begins in 2027. A 2026 O-Level candidate should follow the applicable 2026 syllabus and school instructions. Within a 2027 class, teachers may organise revision differently. The list is a whole-course revision aid for Secondary 4, not a claim that every term is first taught during that year.

For a family in Punggol, the most useful starting material is often already in the school bag: one marked response in which the explanation did not match the question. Circle the decisive word, reconstruct the idea in ordinary English, and then restore the correct scientific language. This keeps revision attached to a real learning need.

Contents · Next chapter

CHAPTER 2 OF 9

The 100 Physics words and terms

Back to contents

Each numbered entry is one headword, including multiword terms such as potential difference. Read a group of ten, cover the meaning column and explain three entries aloud. The example column is a starting point; being able to repeat that example is less useful than explaining a different situation with the same idea.

Measurement and quantities

No.TermMeaningUse and check
1Physical quantityA measurable property expressed using a numerical value and, where appropriate, a unit.A length of 2.4 m identifies both the size of the measurement and its unit.
2SI unitA unit belonging to the International System used to communicate measurements consistently.Convert centimetres to metres before combining values in an equation that requires SI units.
3ScalarA quantity described by magnitude without an associated direction.Speed is scalar: 3 m/s tells how fast, without specifying the direction of travel.
4VectorA quantity with both magnitude and direction.A velocity of 3 m/s east contains information that the speed alone does not provide.
5Resultant forceThe single force representing the combined effect of all forces on an object.Opposing horizontal forces of 9 N and 5 N produce a resultant of 4 N towards the 9 N force.
6PrecisionHow closely repeated measurements agree; instrument reading resolution is a related but different consideration.Closely grouped readings can still be wrong if the instrument has an uncorrected zero error.
7AccuracyHow close a measured result is to the accepted or true value.A correctly calibrated instrument helps; additional decimal places alone do not establish accuracy.
8Random errorAn unpredictable variation affecting measurements in different directions.Repeating measurements and considering their mean can reduce its influence on the final estimate.
9Systematic errorA consistent bias caused by the measuring method or instrument.A miscalibrated balance may shift every mass reading; averaging does not remove that bias.
10Zero errorAn instrument reading different from zero when the measured quantity should be zero.Check a balance before use; apply a correction with the appropriate sign when required.
Vocabulary entries 1–10: meanings and applications

Motion and forces

No.TermMeaningUse and check
11DistanceThe total length of the path travelled, irrespective of direction.Walking 40 m out and 40 m back gives a distance of 80 m.
12DisplacementThe change in position from the starting point, with direction.Returning to the starting point gives zero displacement even after a substantial journey.
13SpeedDistance travelled per unit time.Average speed uses the whole distance divided by the whole elapsed time, including stops.
14VelocityRate of change of displacement, with direction.An object can keep the same speed while its velocity changes because its direction changes.
15AccelerationRate of change of velocity.Velocity increasing by 6 m/s in 3 s gives an average acceleration of 2 m/s².
16MassA measure of the amount of matter in an object, also associated with its inertia; expressed in kilograms.Moving an object to a location with different gravitational field strength does not change its mass.
17WeightThe gravitational force acting on an object.Use W = mg and give the answer in newtons; kilograms describe mass.
18InertiaAn object’s resistance to a change in its velocity.A larger mass needs a larger resultant force for the same acceleration.
19ForceAn interaction that can change an object’s motion or shape.Name the force and its direction before combining it with other forces in a diagram.
20FrictionA contact force opposing relative motion, or a tendency for relative motion, between surfaces.Friction can help a shoe grip the ground; it is not always an unwanted effect.
Vocabulary entries 11–20: meanings and applications

Mechanical relationships and energy

No.TermMeaningUse and check
21DensityMass per unit volume of a material.Equal volumes of two materials can have different masses because their densities differ.
22PressureNormal force per unit area.The same force spread over a larger area produces a smaller pressure.
23MomentThe turning effect of a force about a pivot.Multiply force by the perpendicular distance from the pivot to the force’s line of action.
24Centre of gravityThe point through which the object’s weight may be considered to act.Draw the weight through this point when considering whether an object will topple.
25EquilibriumA state with no resultant force and no resultant turning effect.For a stationary supported beam, check both force balance and clockwise/anticlockwise moments.
26WorkEnergy transferred by a force acting through a displacement.For a constant force parallel to motion, calculate work using force multiplied by distance.
27Kinetic energyEnergy associated with an object’s motion.At unchanged mass, doubling speed makes the kinetic energy four times as large.
28Gravitational potential energyEnergy associated with position in a gravitational field.Near Earth’s surface, lifting through height h increases this energy by mgh.
29PowerThe rate at which energy is transferred or work is done.Two devices can transfer the same energy while the faster device has greater average power.
30EfficiencyThe fraction of input energy or power transferred in the intended useful way.An efficiency of 75% means three quarters of the input is useful in that calculation.
Vocabulary entries 21–30: meanings and applications

Thermal physics

No.TermMeaningUse and check
31Internal energyEnergy associated with the microscopic motion and interactions of particles in a system.A temperature change and a change of state can both involve changes in internal energy.
32TemperatureA quantity indicating thermal state and determining the direction of net thermal energy transfer.Net thermal transfer occurs from a higher-temperature object to a lower-temperature object.
33Thermal energy transferEnergy transferred because of a temperature difference.Describe the transfer between the hot drink and its cooler surroundings, rather than saying cold enters.
34ConductionThermal transfer through particle interactions, with free electrons also contributing in metals.A metal spoon can transfer energy along its length without the spoon travelling through the liquid.
35ConvectionThermal transfer by the bulk movement of a fluid.Heated fluid may become less dense and rise while cooler, denser fluid moves down.
36Infrared radiationElectromagnetic radiation involved in thermal energy exchange between objects.Unlike conduction and convection, this transfer can occur across a vacuum.
37Specific heat capacityEnergy needed per kilogram to raise temperature by one degree Celsius or one kelvin.Use E = mcΔT when temperature changes without a change of state.
38Specific latent heatEnergy transferred per kilogram during a specified change of state without temperature change.Use E = ml for the relevant transition and the mass actually changing state.
39MeltingThe change from solid to liquid.For a pure substance at its melting point, supplied energy can change state without raising temperature.
40EvaporationThe escape of particles from a liquid surface into the gaseous state; it can occur below boiling point.The higher-energy escaping particles can leave the remaining liquid with a lower average particle energy.
Vocabulary entries 31–40: meanings and applications

Waves and sound

No.TermMeaningUse and check
41OscillationA repeated motion about an equilibrium position.Count complete cycles, rather than every crossing of the central position, when finding a period.
42AmplitudeThe maximum displacement from the equilibrium position in an oscillation.Measure from the middle line to a crest, not from a crest to a trough.
43PeriodThe time taken for one complete oscillation.If 20 complete oscillations take 10 s, the period is 0.50 s.
44FrequencyThe number of complete oscillations per unit time.Frequency is measured in hertz; 5 Hz means five cycles each second.
45WavelengthThe distance between consecutive points in phase on a wave.For a regular transverse wave, adjacent crests are separated by one wavelength.
46Wave speedThe speed at which the wave pattern transfers through a medium or space.Use v = fλ, ensuring the wavelength is expressed in a compatible length unit.
47Transverse waveA wave whose oscillations are perpendicular to its direction of energy transfer.Sketch the vibration direction separately from the direction in which the wave travels.
48Longitudinal waveA wave whose oscillations are parallel to its direction of energy transfer.Sound in air has alternating compressions and rarefactions along its travel direction.
49CompressionA region of a longitudinal wave where particles are closer together than usual.It is a higher-pressure region in a sound wave travelling through air.
50RarefactionA region of a longitudinal wave where particles are farther apart than usual.A compression-to-next-compression distance is one wavelength, not half a wavelength.
Vocabulary entries 41–50: meanings and applications

Light and the electromagnetic spectrum

No.TermMeaningUse and check
51ReflectionThe return of a wave into its original medium at a boundary.Measure angles from the normal when comparing incident and reflected rays.
52RefractionA change in wave speed on entering a different medium, usually accompanied by a change in direction.At normal incidence the speed can change without the ray changing direction.
53Refractive indexFor a transparent medium, the ratio of light speed in vacuum to light speed in that medium.It has no unit; a higher value means light travels more slowly in that medium.
54Critical angleThe incidence angle in the higher-index medium giving a refracted angle of 90 degrees.It applies when light travels towards a lower-index medium, not for every boundary direction.
55Total internal reflectionComplete reflection at a boundary when light travels towards a lower-index medium above the critical angle.State both conditions; a large angle alone does not establish total internal reflection.
56Converging lensA lens that brings parallel rays near its principal axis towards a principal focus.For a distant object, its image forms approximately in the focal plane.
57Focal lengthThe distance from the lens’s optical centre to a principal focus for the thin-lens model.Do not confuse focal length with whatever object-to-lens distance happens to be chosen.
58Real imageAn image formed where light rays actually converge.It can be formed on a screen positioned at the image location.
59Virtual imageAn image formed where rays appear to originate when traced backwards.A plane-mirror image cannot be caught on a screen behind the mirror.
60Electromagnetic spectrumThe range of electromagnetic waves ordered by frequency or wavelength.In vacuum they share the same speed; increasing frequency corresponds to decreasing wavelength.
Vocabulary entries 51–60: meanings and applications

Electricity and circuits

No.TermMeaningUse and check
61Electric chargeA property of matter responsible for electrical interactions; its quantity is measured in coulombs.A charge transfer of 6 C in 3 s corresponds to a current of 2 A.
62Electric currentThe rate of flow of electric charge.Use I = Q/t; current describes charge passing per second, not energy used per second.
63Potential differenceEnergy transferred from electrical form per unit charge between two points.A 4 V potential difference means 4 J transferred for each coulomb passing between those points.
64Electromotive forceEnergy supplied by a source per unit charge passing through the source.Although called a force, e.m.f. is measured in volts, not newtons.
65ResistanceThe ratio of potential difference across a component to current through it.Use R = V/I at the stated operating point; resistance can depend on physical conditions.
66Ohm’s lawCurrent through an ohmic conductor is proportional to potential difference when temperature and other physical conditions stay constant.A heating filament is a useful warning against assuming every current-voltage graph is straight.
67Series circuitA circuit arrangement with components along the same unbranched current path.The same current passes through each series component; potential differences need not be equal.
68Parallel circuitA circuit arrangement with branches connected across the same pair of junctions.Each branch has the same potential difference, while currents depend on the branch components.
69Direct currentCurrent flowing in one direction.A constant direct current is one example; the direction criterion does not require constant magnitude.
70Alternating currentCurrent that reverses direction repeatedly.A graph crossing positive and negative current values helps distinguish it from varying direct current.
Vocabulary entries 61–70: meanings and applications

Magnetism and practical electricity

No.TermMeaningUse and check
71Magnetic fieldA region in which magnetic materials, magnets or moving charges can experience magnetic forces.A compass gives a local field direction; field lines are a representation, not physical threads.
72ElectromagnetA magnet produced by electric current, commonly using a coil around a suitable core.Changing the current can change its strength; this distinguishes it from a permanent magnet.
73Motor effectThe force on a current-carrying conductor in a magnetic field.Use the appropriate direction rule after identifying current and field directions in the diagram.
74Electromagnetic inductionThe production of an e.m.f. when a conductor cuts magnetic field lines or the magnetic field linking a coil changes.A stationary magnet and stationary coil do not automatically produce a continuous induced e.m.f.
75TransformerA device using changing magnetic fields to change an alternating voltage.For an ideal transformer, voltage ratio equals turns ratio; a steady direct supply does not provide continuous operation.
76FuseA protective device whose element melts when excessive current flows for sufficient time.Choose an appropriate rating; a fuse is not a component for routinely controlling current.
77Earth wireA protective connection providing a low-resistance fault path from exposed conductive parts to earth.It can help a protective device disconnect the supply during a fault.
78Circuit breakerA protective switch that opens a circuit when a specified fault condition is detected.Different types respond to different faults; do not assume all breakers operate identically.
79Power ratingThe stated power of a device under its specified operating conditions.Check the rated supply condition before treating the number as the power in every situation.
80Kilowatt-hourA unit of energy equal to one kilowatt used for one hour.A 0.5 kW device operating for 2 hours transfers 1 kWh of energy.
Vocabulary entries 71–80: meanings and applications

Radioactivity

No.TermMeaningUse and check
81NucleusThe small central region of an atom containing protons and, usually, neutrons.Most atomic mass is concentrated here, while electrons occupy the surrounding region.
82IsotopeAtoms of the same element with the same proton number but different neutron numbers.Changing the neutron number changes the isotope, not the identity of the element.
83Proton numberThe number of protons in an atomic nucleus.This number identifies the element; an ion still has the same proton number as its atom.
84Nucleon numberThe total number of protons and neutrons in a nucleus.Subtract proton number from nucleon number to find the neutron number.
85Radioactive decayA spontaneous, random nuclear change that emits radiation from an unstable nucleus.Random means an individual decay time is unpredictable; a large sample can show a predictable trend.
86Alpha radiationRadiation consisting of helium nuclei with two protons and two neutrons.Alpha emission reduces the parent’s nucleon number by four and proton number by two.
87Beta radiationHere, radiation consisting of high-speed electrons emitted in beta-minus nuclear decay.In beta-minus decay the nucleon number stays unchanged and the proton number increases by one.
88Gamma radiationHigh-frequency electromagnetic radiation emitted by a nucleus losing energy.Gamma emission alone changes neither the proton number nor the nucleon number.
89Background radiationRadiation detected from environmental sources when the investigated source is absent.Account for background when interpreting measured counts from a radioactive source.
90Half-lifeThe time for the number of undecayed nuclei in a large sample, or its activity, to halve on average.Two half-lives leave one quarter of the original undecayed nuclei, not none.
Vocabulary entries 81–90: meanings and applications

Investigation and question language

No.TermMeaningUse and check
91Independent variableThe factor deliberately changed in an investigation.When investigating wire length and resistance, wire length can be the independent variable.
92Dependent variableThe quantity measured or determined in response to the change.In the same investigation, resistance is the dependent variable calculated from suitable measurements.
93Control variableA factor kept sufficiently constant to make the comparison meaningful.Keep the wire material and cross-sectional area the same when isolating the effect of length.
94AnomalyA result that does not fit the pattern of the other measurements.Check for a reason and repeat where appropriate; do not delete it merely for looking inconvenient.
95GradientThe change in vertical-axis quantity divided by the corresponding horizontal-axis change.Its physical meaning and units depend on the axes, so name them before calculating.
96Direct proportionalityA relationship in which one quantity stays a constant multiple of another.A straight line through the origin supports direct proportionality within the measured range.
97DescribeGive the relevant features, events or pattern shown or requested.For a graph, identify the changing quantity and trend; include data when it makes the account precise.
98ExplainConnect an observation or outcome to a suitable physical reason or mechanism.State why the change occurs, linking the cause to the particular situation in the question.
99CompareConsider similarities and differences using the same basis for both cases.Compare both lamps’ currents under the same circuit conditions, rather than discussing unrelated features.
100SuggestPropose a reason, method or outcome supported by the supplied information and relevant science.An unfamiliar situation still needs a defensible explanation; the word does not invite an unsupported guess.
Vocabulary entries 91–100: meanings and applications

Contents · Previous chapter · Next chapter

CHAPTER 3 OF 9

The distinctions that change an answer

Back to contents

Distance and displacement: follow the complete journey

Imagine a student walking along a straight path from a starting point, turning around, and returning. Distance records the path accumulated. Displacement compares the final and initial positions. A sketch with an origin and a positive direction makes the difference visible. The student should be able to explain why a journey can have positive distance and zero displacement before calculating average speed or average velocity.

Energy and power: separate amount from rate

“This device uses more power” and “this device transfers more energy” are different statements. Energy depends on power and operating time. A lower-power device used for much longer can transfer more energy overall. Encourage the student to write the quantity requested beside the question, including its unit. Joules or kilowatt-hours point towards energy; watts point towards a rate of transfer.

Heat and temperature: explain the process

Temperature is not the total energy stored in an object. A large quantity of warm water and a small quantity of warmer water cannot be compared by temperature alone if the question concerns energy transfer. During melting, energy can change the particle arrangement while temperature remains constant. Ask what is changing: temperature, state, or both over different parts of a process.

Current and potential difference: keep charge and energy separate

Current describes charge passing per unit time. Potential difference describes energy transferred per unit charge. A lamp does not “use up current” as charge passes through it. In a simple series circuit, the current is the same on either side of the lamp, while electrical energy is transferred in the lamp. This distinction supports both circuit calculations and clear explanations.

Observation and explanation: show the missing connection

“The resistance increases” reports a result. Explaining the result needs an appropriate physical cause. If the investigation changes the length of a wire while material, cross-sectional area and temperature remain constant, the longer conducting path provides the relevant connection. If temperature is changing instead, a different explanation is needed. A memorised sentence must still fit the variable being investigated.

Radioactivity and thermal radiation: identify the source

Both discussions use the word radiation, but an account of a warm surface emitting infrared radiation is not an account of radioactive nuclear decay. Teach the student to name the process before choosing a description. Likewise, beta-minus particles are emitted during a nuclear process; they are not simply ordinary orbiting electrons falling out of an atom.

Contents · Previous chapter · Next chapter

CHAPTER 4 OF 9

Worked examples: turning vocabulary into reasoning

Back to contents

The following numbers and situations are invented for teaching. They are not measurements of Punggol transport, appliances or facilities, and they are not copied examination questions.

Example 1: a return walk

A student walks 120 m east along a straight path, then 40 m west. The complete journey takes 100 s. Find the average speed and average velocity.

The distance is 120 + 40 = 160 m. Average speed is therefore 160 ÷ 100 = 1.6 m/s. Taking east as positive, displacement is 120 − 40 = 80 m east. Average velocity is 80 ÷ 100 = 0.8 m/s east. The same time appears in both calculations, but the numerator changes because the requested quantity changes.

A useful retry asks what happens if the student walks the remaining 80 m west. At that point displacement is zero. Average velocity for the whole return journey is zero, while average speed remains positive. If a learner calls both answers zero, return to the two definitions and draw the route again.

Example 2: lifting the same load at different speeds

A small motor raises a 12 kg load vertically through 2.0 m in 4.0 s. Use g = 10 N/kg for this example and assume the load starts and ends at rest. Calculate the increase in gravitational potential energy and the average useful power.

The energy increase is mgh = 12 × 10 × 2.0 = 240 J. Average useful power is 240 ÷ 4.0 = 60 W. If a second motor raises the same load through the same height in 2.0 s, the energy increase remains 240 J, but useful power becomes 120 W.

Suppose the first motor takes 320 J from its supply during the lift. Its efficiency for this operation is 240 ÷ 320 × 100% = 75%. The remaining 80 J is transferred in other ways; it has not disappeared. This one example checks energy, power, useful output and efficiency without treating them as interchangeable words.

Example 3: reading a resistor investigation

A component has potential difference 6.0 V and current 0.30 A at a particular operating point. Its resistance there is V/I = 6.0 ÷ 0.30 = 20 Ω. A student then says, “It obeys Ohm’s law because I used V = IR.” That conclusion is not established by one calculation.

To investigate Ohm’s law, consider a range of potential differences and corresponding currents while maintaining the required physical conditions. Direct proportionality would show a straight current-voltage relationship through the origin within the measurement limits. A ratio from a single reading gives resistance at that point; it does not establish how the component behaves across a range.

When checking a written explanation, ask for the condition as well as the equation. “At constant temperature” is scientifically meaningful here. It cannot be replaced by the vague statement “everything is normal”. Treat this as a paper-based reasoning task; any practical electrical investigation belongs in the school’s approved supervised setting.

Example 4: a wave crosses a boundary

A wave has frequency 5 Hz and wavelength 0.40 m in one medium. Its speed is fλ = 5 × 0.40 = 2.0 m/s. On crossing into a second medium, its frequency remains 5 Hz and its speed becomes 1.5 m/s. Its new wavelength is v/f = 1.5 ÷ 5 = 0.30 m.

The source fixes the frequency in this situation. The change of medium changes the speed and therefore the wavelength. A learner who divides the new speed by the old wavelength to invent a new frequency has changed a quantity that the situation held constant. Before calculating, list what remains the same and what changes.

Example 5: account for background before using half-life

A detector records 100 counts per minute with a source present. The background count rate is 20 counts per minute. The source’s contribution is therefore 80 counts per minute. After one half-life, its expected contribution is 40 counts per minute; the total detector rate would be approximately 60 counts per minute if the background is unchanged.

Halving the original detector reading would incorrectly give 50. The half-life applies to the source contribution, not to an unrelated background contribution added to it. Real counting data fluctuate, so these values describe an idealised expectation. The example concerns interpreting supplied data, not handling radioactive material.

Contents · Previous chapter · Next chapter

CHAPTER 5 OF 9

Independent practice with answer discussions

Back to contents

Try these without looking back at the glossary. Write a reason as well as a number wherever possible. The aim is to discover the next useful correction, so leave an uncertain answer visible rather than rewriting it from the answer section.

  1. A bag has mass 3.0 kg. Using g = 10 N/kg, state its weight and explain why 3.0 kg is not the answer to a weight question.
  2. A wave makes 12 complete oscillations in 6.0 s. Find its frequency and period.
  3. A 600 W device operates for 30 minutes. Find the energy transferred in kilowatt-hours.
  4. A learner says that a straight-line graph always proves direct proportionality. Identify the missing condition.
  5. An object moves with constant velocity along a straight line. What can be said about its resultant force, using the usual school mechanics model?
  6. A source has half-life 8 hours. What fraction of its initial undecayed nuclei remains after 24 hours on average?
  7. A light ray travels from air into glass. Explain why a large incidence angle alone is insufficient to claim total internal reflection.
  8. In a wire-resistance investigation, name one important control variable and explain why it matters.

Answers and what an error tells you

1. Weight is mg = 3.0 × 10 = 30 N. Mass and gravitational force are different quantities. A correct number with kilograms still requires correction because the unit communicates the wrong quantity.

2. Frequency is 12 ÷ 6.0 = 2.0 Hz; period is 6.0 ÷ 12 = 0.50 s. If the answers are interchanged, ask whether the calculation means cycles per second or seconds per cycle.

3. Convert 600 W to 0.600 kW and 30 minutes to 0.50 h. Energy is 0.600 × 0.50 = 0.300 kWh. An answer in kW confuses power with energy; an answer sixty times too large may indicate that minutes were treated as hours.

4. The straight line must pass through the origin for direct proportionality of the plotted quantities. A line with a nonzero intercept can describe a linear relationship without proportionality.

5. Constant velocity means zero acceleration, so the resultant force is zero. Individual forces may still act and balance. “No resultant force” does not mean “no forces”.

6. Twenty-four hours is three half-lives, leaving one eighth. Halve the remaining population at each interval; do not subtract the same number of nuclei each time.

7. Total internal reflection requires travel from a higher-index medium towards a lower-index medium, as well as an incidence angle greater than the critical angle. Air-to-glass travel does not satisfy that first condition.

8. For example, keep cross-sectional area constant because changing it also changes resistance. Merely naming a variable is a weaker check of understanding than explaining how it could affect the comparison.

Use your answers to choose the next learning step

Use the pattern below with the diagnostic questions in this chapter. A question count is not a predicted examination grade. Record the explanation that needs repair, try the matched task, and review a fresh example after a gap. If the same misunderstanding persists, take that exact example to the teacher or tutor.

Observed difficultyFirst teaching actionFresh checkWhat progress looks like
Questions 1 to 3: quantity or unit confusionWrite the meaning and required unit before choosing an equation.Change the mass, oscillation count or operating time.The student converts units and names the quantity independently.
Questions 4 and 5: missing conditionsDescribe what the graph or motion statement actually establishes.Compare a straight graph with an intercept and a constant-velocity force diagram.The student includes the origin condition and distinguishes zero resultant force from no forces.
Questions 6 and 7: process or boundary confusionTrack what changes at each stage and state the necessary conditions.Use a different number of half-lives and reverse a light ray’s boundary direction.The explanation applies the condition before the calculation or conclusion.
Question 8: investigation reasoningLink each controlled factor to its possible effect on the measured result.Explain another control in the wire investigation.The student supplies a reason for control rather than a memorised list.
Diagnostic results, next actions and evidence of improvement

Keep the original attempt and the later retry together. When a student can explain the changed question without the earlier answer visible, the repair has evidence behind it. If only the copied example works, reduce the next task to one condition or one representation and teach that connection explicitly.

Contents · Previous chapter · Next chapter

CHAPTER 6 OF 9

A four-week revision route that stays manageable

Back to contents

This is a suggested study routine, not a prescribed national timetable. Adjust it around school assignments and the topics that actually need repair. A short, completed session with an independent retry provides more useful information than an ambitious plan repeatedly abandoned.

Week 1: establish meanings and units

Use the measurement, motion and mechanics groups first. Select five uncertain terms at a time. For each, write a meaning, a unit where applicable, and one situation in which it matters. Revisit the terms two days later without the list. Keep a simple record: can explain; can calculate but cannot explain; or needs teaching. These categories lead to different next steps.

Week 2: make the distinctions visible

Pair temperature with thermal transfer, amplitude with wavelength, and frequency with period. Draw small diagrams and mark which quantity each arrow or measurement represents. Take one incorrect statement from your own work and repair it in a complete sentence. Changing a word is useful only if you can explain why the original word was wrong.

Week 3: move into circuits and unfamiliar contexts

Use charge, current, potential difference, resistance and power together. Read a supplied diagram before selecting an equation. Explain one change in words, then test it with a small calculation. Mix an older mechanics question into the same session so that the chapter heading does not give away which method to use.

Week 4: practise under light time pressure and review the evidence

Use the radioactivity and investigation groups, then attempt a short mixed set. Mark errors by cause: meaning, condition, unit, algebra, evidence or expression. Choose the two most repeated causes for the next revision cycle. A student who now defines every word but still cannot choose a relationship needs application practice, rather than another round of copying definitions.

On a busy school day, ten focused minutes may be a realistic starting point: two terms recalled, one question attempted and one correction explained. On another day, a longer school-paper review may be more appropriate. The routine should support the student’s wider workload and preserve time to act on feedback.

Contents · Previous chapter · Next chapter

CHAPTER 7 OF 9

What to look for in Physics small groups tuition

Back to contents

In a three-student group, a tutor can ask every learner to commit to an answer before discussion. One student may correctly calculate resistance, another may explain the temperature condition, and a third may spot that the graph does not pass through the origin. The tutor’s job is to make those pieces explicit and then check that each learner can reproduce the complete reasoning independently.

An illustrative lesson could begin with three short diagnostic questions, continue with one careful concept explanation, and then use paired examples in which a single condition changes. Students finish with a question they have not seen before. This is a sample teaching design, not a statement of a current timetable, laboratory provision or available class place.

Parents can ask four concrete questions when considering support: Which misunderstanding appeared in the student’s own work? What will be taught to address it? What independent task will show whether it has improved? When will that evidence be reviewed? Clear answers help distinguish a purposeful plan from a general promise of more practice.

If the student can explain the topic after a brief school clarification and succeeds in a new question, home practice may be sufficient. If the same confusion persists across several assignments, a more structured intervention may help. If the concern is mainly practical handling, discuss the school’s practical preparation because reading and tuition explanations alone do not replace supervised laboratory experience.

Bring the subject code, recent marked work and the school’s current revision priorities to a discussion. You can explore the eduKatePunggol Science learning and tuition route or request a parent–student consultation. Confirm current subject support, arrangements and availability directly before making a commitment.

Contents · Previous chapter · Next chapter

CHAPTER 8 OF 9

Questions students and parents often ask

Back to contents

Must all 100 terms be memorised immediately?

No. Begin with terms that unlock current schoolwork, then revisit the rest systematically. A useful target is being able to explain and apply a small group accurately. Completing the list quickly is not evidence that the ideas can be used.

Are these the only words needed for G3 Physics?

No. The list is selective. School notes, lessons and the official syllabus contain additional content and terminology. Use the list to organise revision, and add a personal error notebook for words that repeatedly cause difficulty.

Can a student use everyday English in an explanation?

Clear everyday English can help establish meaning, but the final explanation must be scientifically precise. “The object speeds up because the forward force is larger than the opposing force” communicates a relationship. “It becomes stronger” leaves the quantity and mechanism unclear.

Does correct vocabulary automatically earn explanation marks?

No. The terms must connect to the particular evidence, conditions and question. A response full of technical words can still miss the required relationship. Check the complete reasoning against teacher feedback and the question’s demands.

Is this also a complete combined Science Physics guide?

No. Some terms will be useful in both courses, but combined Science has its own syllabus. Follow the entry confirmed by the school and check the relevant document before deciding the depth or range of revision.

Contents · Previous chapter · Next chapter

CHAPTER 9 OF 9

Official references and further reading

Back to contents

Curriculum references checked on 16 November 2026. These official documents establish subject identity, examination-year context and scope. The glossary explanations, numerical examples, practice tasks and revision suggestions above are original teaching material.

Contents · Previous chapter · Continue to the wider vocabulary reference

Continue from here: Start Here · Tuition · Education · Pathways · Parenting 101 · All Site Routes

eduKate Punggol

Contact

83 Punggol Central, Singapore 828761

edu|Kate Bukit Timah

8 Fourth Avenue, Singapore 268674

By Appointment +65 8823 1234
admin@edukatesg.com

Email Us

When a child finally understands, school becomes less frightening and the future opens wider. Email us for the latest schedules and fees.

← 返回

感谢您的回复。 ✨