This Top 100 Secondary 1 G3 Mathematics Vocabulary List for Punggol helps students understand the language inside school lessons, homework and assessment questions. It explains terms such as coefficient, reverse percentage, gradient and justify, then shows how each works in an example. Start with the words appearing in your child’s current chapter. A student who can explain what a question means has a clearer starting point for deciding what to calculate.
For parents considering Secondary 1 G3 Mathematics small groups tuition, use this guide to identify the kind of support needed: reading the instruction, understanding a concept, carrying out a calculation or checking a solution. The 100 entries are an eduKate teaching selection, not an official MOE or SEAB compulsory word list or a prediction of examination questions. Learn a few related terms together, practise them in actual problems and check understanding again on another day.
- Who this is for: Secondary 1 students taking Mathematics at G3 and parents supporting their transition from primary school.
- What is included: exactly 100 distinct words and terms, each with a clear meaning and an original mathematical example.
- What to study first: the vocabulary of the current school topic, together with any earlier number or algebra ideas it depends on.
- How to practise: explain the word, show an example, distinguish a near-miss and solve a new question without looking at the answer.
- What progress looks like: more accurate question reading, sensible working, correct units and explanations the student can give independently.
- How to use tuition: ask for focused diagnosis and teaching within the three-pax format; confirm actual class arrangements directly.
Choose your next learning step
eduKate Punggol · Secondary 1 G3 Mathematics
Start with today’s school topic, or use one of the routes below.
Chapter index
Understand the vocabulary and worked examples
Practise, plan and find answers
CHAPTER 1 OF 9 · Back to contents
1. Read the list with the right expectations
G3 describes the level at which a subject is taken. It should not become a permanent description of a child’s ability. Under Full Subject-Based Banding, students can take subjects at different levels and may adjust subject levels at appropriate points. A family should discuss an individual child’s subject combination with the school. See MOE’s explanation of subject-level flexibility.
The curriculum reference for this guide is the Secondary One section of MOE’s G2 and G3 Mathematics syllabuses. It includes number and algebra, geometry and measurement, and the relevant introductory data work. The list also includes familiar prerequisite language and useful instruction words. Your school’s sequence, current textbook and teacher’s assessment information tell you which part to use now; the list is not a term-by-term timetable.
Secondary 1 students prepare for their school assessments. They are not sitting a Secondary 1 SEAB national Mathematics examination. SEAB explains that the Singapore-Cambridge Secondary Education Certificate begins in 2027. An examination specification for that graduating cohort should not be treated as the guaranteed future specification for a student beginning Secondary 1. Build the present foundations and check the applicable examination-year information later.
A useful first check takes only three questions. Ask the student to explain the difference between an expression and an equation, show a factor of 18, and describe what “at least five” allows. Listen to the explanation before judging the answer. A student who knows the calculation but cannot read the instruction needs a different lesson from one who understands the instruction but cannot work with fractions.
CHAPTER 2 OF 9 · Back to contents
2. The complete 100-word Mathematics list
The groups below are organised by meaning rather than difficulty. Several words will already be familiar from primary school, but Secondary 1 requires students to use them more precisely and in combination. Cover the example column when testing recall. Treat each short definition as a starting point, then use the worked examples later in this guide to see the reasoning in full.
Words 1–10: numbers, factors and multiples
| No. | Word or term | Clear meaning | Example and useful distinction |
|---|---|---|---|
| 1 | Integer | A positive or negative whole number, or zero. | −4, 0 and 12 are integers; 2.5 is not. Being negative does not stop a number from being an integer. |
| 2 | Rational number | A number that can be written as a/b, where a and b are integers and b is not zero. | 0.75 = 3/4 and −2 = −2/1. A fraction can represent a rational number greater than one. |
| 3 | Real number | A number represented on the ordinary number line, including rational and irrational numbers. | −3, 1/2 and √2 are real numbers. Not every real number has a terminating decimal representation. |
| 4 | Factor | A number or expression that is multiplied by another to form a product. | Since 20 = 4 × 5, 4 is a factor of 20. In algebra, x is a factor of 3x. |
| 5 | Multiple | A result of multiplying a number by an integer. | The positive multiples of 6 begin 6, 12, 18 and 24. A multiple need not be a factor of the original number. |
| 6 | Prime number | An integer greater than one with exactly two positive factors: one and itself. | 7 is prime because its positive factors are 1 and 7. The number 1 is not prime. |
| 7 | Prime factorisation | Writing a positive integer as a product of prime numbers. | 60 = 2² × 3 × 5. Stop when every factor in the product is prime. |
| 8 | Highest common factor (HCF) | The greatest positive integer that divides each of the given positive integers exactly. | The HCF of 24 and 36 is 12. It helps when making the greatest possible number of identical packs. |
| 9 | Lowest common multiple (LCM) | The smallest positive integer that is a multiple of every given positive integer. | The LCM of 6 and 8 is 24. It helps identify when repeating six-unit and eight-unit cycles next coincide. |
| 10 | Consecutive | Following one another without gaps in the sequence being discussed. | 4, 5 and 6 are consecutive integers. Consecutive even integers, such as 4, 6 and 8, differ by two. |
Keep factor and multiple in a pair of example sentences: “3 is a factor of 12” and “12 is a multiple of 3.” Reversing the nouns changes the statement. A child who can draw three groups of four can use that picture to explain both relationships.
Words 11–20: fractions, powers and precision
| No. | Word or term | Clear meaning | Example and useful distinction |
|---|---|---|---|
| 11 | Numerator | The number above the fraction line. | In 7/4, the numerator is 7: seven quarter-sized parts are being counted. A numerator can exceed its denominator. |
| 12 | Denominator | The non-zero number below the fraction line. | In 3/5, the denominator 5 identifies fifths. A denominator of zero is not permitted. |
| 13 | Reciprocal | The number that gives a product of one when multiplied by the original non-zero number. | The reciprocal of 2/3 is 3/2. The reciprocal of −2 is −1/2; zero has no reciprocal. |
| 14 | Square | The result of multiplying a number by itself. | 5² = 25 and (−5)² = 25. The brackets identify the whole negative number as the quantity being squared. |
| 15 | Cube | The product of three equal factors, each equal to the given number. | 3³ = 27, while (−3)³ = −27. An odd number of negative factors gives a negative product. |
| 16 | Square root | A number whose square equals a given non-negative number; the √ symbol denotes its non-negative square root. | √25 = 5. Although (−5)² also equals 25, the symbol √25 denotes 5. |
| 17 | Cube root | The real number whose cube equals the given number. | The cube root of 64 is 4, and the cube root of −8 is −2. Negative inputs are possible here. |
| 18 | Decimal place | A position to the right of the decimal point. | 3.746 rounded to two decimal places is 3.75. Count places from the decimal point, including zeros. |
| 19 | Significant figure | A digit counted when stating the precision of a number, beginning at the first non-zero digit. | 0.00472 has three significant figures. Its initial zeros locate the decimal value but are not significant figures. |
| 20 | Estimate | A deliberately approximate value used when an exact answer is unnecessary or for a reasonableness check. | 19.8 × 5.12 is about 20 × 5 = 100. This estimate checks the scale of the exact calculation. |
An estimate and a rounded answer do different jobs. Estimation may simplify the numbers before calculating. Rounding usually expresses a number to a requested precision. Read which process the question requests, and keep enough accuracy in intermediate steps for the final answer.
Words 21–30: the parts of algebra
| No. | Word or term | Clear meaning | Example and useful distinction |
|---|---|---|---|
| 21 | Variable | A symbol representing a number that can change or whose value is being considered. | In y = 2x + 1, choosing different values of x gives different values of y. |
| 22 | Constant | A fixed value in the context being considered. | In 3x + 8, the constant term is 8. It does not change when x changes. |
| 23 | Coefficient | The numerical factor multiplying a variable or variable part of a term. | In −5x, the coefficient of x is −5. Include the negative sign when identifying it. |
| 24 | Term | A part of an expression separated from other parts by addition or subtraction. | The terms of 4x − 7 are 4x and −7. Keep the sign with the term. |
| 25 | Like terms | Terms with the same variable part, including the same powers. | 3x and −2x are like terms, but 3x and 3x² are not. Only like terms combine directly by addition. |
| 26 | Expression | A mathematical combination of numbers, variables and operations. | 2x + 5 is an expression. Without an equation or a supplied x value, it does not determine one number. |
| 27 | Equation | A statement that two expressions are equal. | 2x + 5 = 13 is an equation. Solving it asks which value of x makes the equality true. |
| 28 | Formula | An equation expressing a relationship between quantities. | A = lw relates a rectangle’s area to its length and width. Identify the units and meaning of each letter. |
| 29 | Substitute | Replace a variable with its specified value or expression. | For x = −3, 2x + 5 becomes 2(−3) + 5. Brackets help preserve the negative value. |
| 30 | Evaluate | Find the numerical value of an expression when enough information is given. | For x = 4, evaluate 3x − 2 as 3(4) − 2 = 10. The final result is a number. |
A letter does not automatically mean “find x.” Ask what mathematical object is present. An expression might need simplification, a formula might need substitution, and an equation might need solving. Naming the object first reduces the temptation to perform a familiar but unsuitable procedure.
Words 31–40: algebra actions and boundary language
| No. | Word or term | Clear meaning | Example and useful distinction |
|---|---|---|---|
| 31 | Simplify | Rewrite an expression in an equivalent, more convenient form. | 5x + 2x − 3 simplifies to 7x − 3. Simplifying does not assign an arbitrary value to x. |
| 32 | Expand | Remove brackets by carrying out the required multiplication. | 3(x + 4) expands to 3x + 12. Multiply every term inside the bracket. |
| 33 | Factorise | Rewrite an expression as a product of factors. | 6x + 9 factorises to 3(2x + 3). Expand your answer to check that it reproduces the original expression. |
| 34 | Solve | Find the value or values that make an equation true. | Solving 3x = 18 gives x = 6. State the value of the unknown, then check it in the original equation. |
| 35 | Solution | A value that satisfies the given equation or conditions. | x = 4 is a solution of 2x + 1 = 9 because substituting 4 makes both sides equal. |
| 36 | Equivalent | Having the same mathematical value or effect under the stated conditions. | 2(x + 3) and 2x + 6 are equivalent expressions for every value of x. |
| 37 | Inequality | A statement comparing quantities using symbols such as <, >, ≤ or ≥. | x > 4 allows values larger than 4 but excludes 4 itself. Notice whether the boundary is included. |
| 38 | At least | Greater than or equal to a stated value. | “At least five students” means five or more. The boundary value five is allowed. |
| 39 | At most | Less than or equal to a stated value. | “At most eight items” allows eight items but excludes nine. For a count, the permitted values are whole numbers. |
| 40 | More than | Strictly greater than a stated value. | “More than five” excludes five. If the quantity counts students, the smallest possible count is six. |
Boundary words can change an answer even when every calculation is correct. Test the boundary explicitly: does “at least 10” allow 10? Does “more than 10” allow 10? This tiny substitution check is often clearer than trying to memorise a slogan about the inequality sign.
Words 41–50: ratios, percentages and journeys
| No. | Word or term | Clear meaning | Example and useful distinction |
|---|---|---|---|
| 41 | Ratio | A comparison of quantities in a stated order. | Red to blue counters in the ratio 2:3 means two red parts for every three blue parts, not two red parts out of three total. |
| 42 | Equivalent ratios | Ratios representing the same comparison after multiplying or dividing every part by the same non-zero number. | 2:3 and 8:12 are equivalent. Changing only one part changes the comparison. |
| 43 | Unit rate | An amount of one quantity for one unit of another quantity. | If three identical notebooks cost $6 in an example, the unit price is $2 per notebook. |
| 44 | Percentage | A way to express a quantity or comparison per hundred. | 35% = 35/100 = 0.35. Always identify the whole or reference amount represented by 100%. |
| 45 | Percentage increase | The increase divided by the original amount, expressed as a percentage. | A rise from 40 to 50 is an increase of 10/40 × 100% = 25%. |
| 46 | Percentage decrease | The decrease divided by the original amount, expressed as a percentage. | A fall from 50 to 40 is a decrease of 10/50 × 100% = 20%, not 25%. |
| 47 | Percentage point | A unit for the arithmetic difference between two percentages. | A change from 30% to 45% is 15 percentage points. The relative increase is 50% of the original 30%. |
| 48 | Reverse percentage | Finding an original amount from a final amount after a percentage change. | After a 20% discount, $72 is 80% of the original price. The original is 72 ÷ 0.8 = $90. |
| 49 | Speed | Distance travelled per unit of time. | A constant speed of 4 km/h means four kilometres in each hour. Match distance and time units before dividing. |
| 50 | Average speed | Total distance divided by total time for the journey being considered. | For 3 km in 45 minutes, average speed is 3 ÷ 0.75 = 4 km/h. Include stops if they belong to the stated journey time. |
With percentages, ask “a percentage of what?” With ratios, ask “which quantity comes first?” With rates, ask “per which unit?” These questions identify the comparison before any arithmetic begins. The calculations become more reliable when the reference quantity is visible.
Words 51–60: coordinates, graphs and patterns
| No. | Word or term | Clear meaning | Example and useful distinction |
|---|---|---|---|
| 51 | Coordinate | A number specifying a position relative to an axis in a coordinate system. | At the point (3, −2), the x-coordinate is 3 and the y-coordinate is −2. |
| 52 | Ordered pair | Two values written in a specified order, commonly (x, y). | (2, 5) and (5, 2) generally name different points. Reversing the order changes the location. |
| 53 | Origin | The point where the coordinate axes meet, normally labelled (0, 0). | From the origin, the point (−3, 2) is three units left and two units up. |
| 54 | Horizontal axis | The axis running left to right on a standard Cartesian graph. | The horizontal axis is usually the x-axis. Read its scale instead of assuming each square represents one unit. |
| 55 | Vertical axis | The axis running up and down on a standard Cartesian graph. | The vertical axis is usually the y-axis. Its units and interval may differ from those of the horizontal axis. |
| 56 | Scale | The relationship between positions or marked intervals and the values they represent. | If successive labelled marks are 0, 5 and 10, each equal interval represents five units. |
| 57 | Linear relationship | A relationship represented by a straight-line graph, such as y = ax + b. | For y = 2x + 3, each increase of one in x increases y by two. |
| 58 | Gradient | The vertical change divided by the corresponding horizontal change along a line. | From (1, 5) to (3, 11), the gradient is (11 − 5)/(3 − 1) = 3. |
| 59 | Intercept | A point where a graph meets an axis, or the relevant coordinate of that point. | For y = 2x + 3, the y-intercept is 3 because x = 0 gives y = 3. |
| 60 | Sequence | An ordered list of numbers or other objects following a stated or inferred pattern. | For the rule 2n + 1 with n = 1, 2, 3, the first three terms are 3, 5 and 7. |
A graph is more than a picture to copy. Explain what one point represents, read the axes and connect the plotted points to the rule. On a non-uniform or incorrectly labelled scale, a neat-looking line can still communicate the wrong information.
Words 61–70: angle language
| No. | Word or term | Clear meaning | Example and useful distinction |
|---|---|---|---|
| 61 | Acute angle | An angle greater than 0° and less than 90°. | A 35° angle is acute. A right angle of exactly 90° does not belong to this category. |
| 62 | Obtuse angle | An angle greater than 90° and less than 180°. | A 120° angle is obtuse. An angle of 200° is too large to be obtuse. |
| 63 | Reflex angle | An angle greater than 180° and less than 360°. | A 240° angle is reflex. Mark the intended larger turn so that it is not confused with the smaller angle. |
| 64 | Perpendicular | Meeting at a right angle. | If two lines meet at 90°, they are perpendicular. Use the right-angle mark or stated information as evidence. |
| 65 | Parallel | Describing lines in the same plane that never meet when extended. | Parallel lines cut by a transversal produce useful equal-angle relationships. A diagram’s appearance alone does not prove parallelism. |
| 66 | Transversal | A line crossing two or more other lines at distinct points. | Identify the transversal before selecting corresponding or alternate angles in a parallel-line diagram. |
| 67 | Vertically opposite angles | Opposite angles formed when two straight lines cross. | If one angle at an intersection is 68°, its vertically opposite angle is 68°, not 112°. |
| 68 | Corresponding angles | Angles in matching positions at separate intersections made by a transversal. | When the two crossed lines are parallel, corresponding angles are equal. State the parallel-line condition when giving the reason. |
| 69 | Alternate angles | Angles on opposite sides of a transversal in the appropriate alternate positions. | For parallel lines, alternate interior angles are equal. Identify both angles carefully before applying the rule. |
| 70 | Interior angles | Angles inside a polygon, or between two lines crossed by a transversal, depending on context. | A triangle’s interior angles total 180°. Between parallel lines, interior angles on the same side of a transversal total 180°. |
Give the geometrical reason as well as the number. “The angles look equal” is an observation about a drawing. “They are corresponding angles between parallel lines” identifies the condition that makes the equality valid. A sketch may be deliberately not drawn to scale.
Words 71–80: shapes and symmetry
| No. | Word or term | Clear meaning | Example and useful distinction |
|---|---|---|---|
| 71 | Polygon | A closed plane figure whose boundary consists of straight line segments. | A pentagon has five sides. A circle is not a polygon because its boundary is curved. |
| 72 | Regular polygon | A polygon with all sides equal and all interior angles equal. | A regular hexagon has six equal sides and six equal interior angles. Equal sides alone do not establish every polygon as regular. |
| 73 | Triangle | A polygon with three sides. | The interior angles of a triangle total 180°. Classify it using the properties actually given. |
| 74 | Isosceles triangle | A triangle with at least two equal sides; the angles opposite those equal sides are equal. | If the equal base angles are 50° each, the remaining angle is 80°. |
| 75 | Equilateral triangle | A triangle with three equal sides and three equal angles. | Each angle is 60°. Both the side and angle properties can be used in a solution. |
| 76 | Quadrilateral | A polygon with four sides. | The interior angles of a quadrilateral total 360°. Squares, rectangles and trapeziums belong to this broad family. |
| 77 | Parallelogram | A quadrilateral with both pairs of opposite sides parallel. | Opposite angles are equal. Its area uses a base and the perpendicular height, which may differ from a sloping side. |
| 78 | Trapezium | A quadrilateral with a pair of opposite sides parallel. | With parallel sides 6 cm and 10 cm and perpendicular height 4 cm, its area is ½(6 + 10) × 4 = 32 cm². |
| 79 | Line symmetry | A property in which reflection in a line maps a figure onto itself. | A non-square rectangle has two lines of symmetry. Its diagonals are not lines of symmetry. |
| 80 | Rotational symmetry | A property in which a turn smaller than 360° maps a figure onto itself. | A square has rotational symmetry of order four: it matches at quarter-turn intervals over a full turn. |
Describe a shape through its properties rather than its position on the page. Rotating a square does not stop it from being a square. Turning an isosceles triangle sideways does not change which angles are opposite its equal sides.
Words 81–90: measuring surfaces and solids
| No. | Word or term | Clear meaning | Example and useful distinction |
|---|---|---|---|
| 81 | Perimeter | The total length of the boundary of a plane figure. | A rectangle 8 cm by 3 cm has perimeter 2(8 + 3) = 22 cm. The unit measures length. |
| 82 | Area | The size of a two-dimensional region, expressed in square units. | A rectangle 8 cm by 3 cm has area 24 cm². Area and perimeter answer different questions. |
| 83 | Perpendicular height | The distance measured at right angles to the chosen base or parallel bases. | For a parallelogram, use the height perpendicular to the base in area = base × height. |
| 84 | Volume | The amount of three-dimensional space occupied by a solid. | A cuboid 4 cm by 3 cm by 2 cm has volume 24 cm³. The unit is cubic. |
| 85 | Surface area | The total area of the surfaces being counted on a solid. | Check whether a container is open or closed. An open top is not an additional material surface. |
| 86 | Prism | A solid with a constant polygonal cross-section along its length. | A prism with cross-sectional area 6 cm² and perpendicular length 5 cm has volume 30 cm³. |
| 87 | Cylinder | A solid with two equal parallel circular ends joined by a curved surface. | A right cylinder with radius 2 cm and height 5 cm has volume π × 2² × 5 = 20π cm³. |
| 88 | Cross-section | The two-dimensional shape exposed by slicing a solid along a specified plane. | A cut parallel to a cylinder’s circular base produces a circular cross-section. The direction of the cut matters. |
| 89 | Composite figure | A figure made from simpler shapes joined together, or formed by removing one shape from another. | Find an L-shaped area by splitting it into rectangles or subtracting a rectangular notch from a larger rectangle. |
| 90 | Unit conversion | Expressing the same quantity using a different unit. | 1 m = 100 cm, but 1 m² = 10,000 cm². Area conversions square the length conversion factor. |
Before choosing a formula, name what is being measured. Fencing follows a boundary; covering a flat surface uses area; filling a container involves volume. These are mathematical models, so a real task may require additional information such as waste or thickness. Do not add those assumptions unless the problem calls for them.
Words 91–100: data and useful instruction words
| No. | Word or term | Clear meaning | Example and useful distinction |
|---|---|---|---|
| 91 | Data | Recorded observations, measurements or other information collected for a purpose. | The numbers of books read by ten students form a data set. State what was measured and whose information was collected. |
| 92 | Frequency | The number of times an outcome or category occurs. | If seven students choose football, the frequency for football is seven. It is a count, not automatically a percentage. |
| 93 | Bar graph | A display using bars to compare quantities or frequencies for categories. | Read the scale before comparing bar heights. A misleading vertical-axis starting point can exaggerate a difference. |
| 94 | Line graph | A display joining plotted observations to show a pattern, often change over time. | A line graph can show daily temperatures. Check the time intervals before describing how quickly a value changes. |
| 95 | Pie chart | A circle divided into sectors representing parts of a whole. | A category containing one quarter of the total occupies 90° of the circle. Check the total before finding a sector angle. |
| 96 | Pictogram | A display using pictures or symbols to represent quantities. | If one symbol represents four students, two and a half symbols represent ten. Always read the key. |
| 97 | Calculate | Obtain a numerical answer by carrying out the appropriate operations. | “Calculate the area” calls for the relevant measurements and operation, followed by an answer with square units. |
| 98 | Describe | State the relevant features or pattern shown by the information. | For an increasing graph, say which quantity rises as the other changes. Use values or intervals when they make the description precise. |
| 99 | Explain | Give a reason that connects the information to the conclusion. | Explain why a price is lower by identifying the discount and the original reference amount, not merely repeating the new price. |
| 100 | Justify | Support a statement or choice with valid mathematical evidence. | To justify that 84 is divisible by 6, show 84 = 6 × 14. A confident assertion alone supplies no evidence. |
Instruction words guide the form of a response, but they do not supply an automatic marking formula. Read the complete task, any requested method and the teacher’s feedback. A question asking for a justification may need a short calculation, a counterexample or a geometrical reason, depending on the claim.
CHAPTER 3 OF 9 · Back to contents
3. Read the instruction before choosing an operation
A useful reading routine separates three things: the object, the action and the conditions. In “factorise 6x + 9 fully,” the object is an expression, the action is factorisation and the condition is that no further common factor should remain inside the bracket. The answer is 3(2x + 3). Writing x = 4 would answer a different question that was never asked.
In “find the smallest integer greater than 3.2,” the object is an integer and the boundary is strict. The answer is 4. In “give a number greater than 3.2,” many answers are possible, including 3.25. The missing word “integer” changes the allowed set. When a child obtains an apparently strange answer, inspect the wording before requesting another page of practice.
Mathematical words also carry more specific meanings than their everyday uses. A “term” might mean a school term in conversation, but it names a part of an algebraic expression here. A “constant” is not simply something that happens frequently. It is a quantity held fixed in the stated context. Encourage the student to give an example rather than supplying a vague everyday synonym.
Try a short annotation: underline the requested action, box the reference quantity and circle a boundary or unit condition. Stop once the important information is visible. Decorating every sentence can make a question harder to read. The purpose is to explain the task in one accurate sentence before beginning the solution.
CHAPTER 4 OF 9 · Back to contents
4. Nine worked examples that connect words to reasoning
The following questions are original teaching examples. Their prices, quantities and journeys are invented for practice. They do not describe a real Punggol shop, fare, route or promotion. Work through the language before checking the calculations.
Example 1: choose HCF or LCM from the situation
A student has 24 blue cards and 36 green cards. She wants the greatest possible number of identical packs, using every card. Each pack must contain the same number of blue cards and the same number of green cards. The number of packs must divide both 24 and 36, so it must be a common factor. “Greatest possible” selects the highest common factor: 12.
There are therefore 12 packs, each containing 24 ÷ 12 = 2 blue cards and 36 ÷ 12 = 3 green cards. Check by rebuilding the totals: 12 × 2 = 24 and 12 × 3 = 36. If two reminders instead repeat every six and eight minutes from the same starting time, the next joint reminder needs a common multiple. Their first positive meeting time is 24 minutes. The context determines the relationship.
Example 2: distinguish decimal places, significant figures and estimation
Round 0.04786 to three significant figures. Begin counting at 4, the first non-zero digit. The three retained digits are 4, 7 and 8; the next digit is 6, so the result is 0.0479. To three decimal places, count three positions from the decimal point instead. The result is 0.048. Both answers are correctly rounded, but they answer different instructions.
Now estimate 19.8 × 5.12. Convenient nearby values give 20 × 5 = 100. The exact product is 101.376, so the estimate supports its overall size. An answer of 1,013.76 should trigger a decimal-place check. Estimation is useful because it asks whether the answer belongs in the right neighbourhood before the student trusts every calculator digit.
Example 3: translate an expression, then solve an equation
“Three less than twice a number” becomes 2x − 3. Start with twice the number, then subtract three. The expression 3 − 2x describes a different subtraction. If the sentence continues “is eleven,” an equation has been created: 2x − 3 = 11. Add three to both sides to obtain 2x = 14, then divide both sides by two to obtain x = 7.
The checking sentence matters: twice seven is fourteen, and three less than fourteen is eleven. This verifies the original words as well as the symbols. Next simplify 4x − 2(x − 3). Expanding gives 4x − 2x + 6, so the result is 2x + 6. For x = −1, both original and simplified expressions give 4. This checks a particular case; the distributive reasoning establishes the equivalence generally.
Example 4: connect ratio parts to the whole
A mixture uses two parts concentrate to three parts water. The total volume is 750 mL. The ratio 2:3 contains five parts altogether, so one part is 750 ÷ 5 = 150 mL. Concentrate therefore occupies 2 × 150 = 300 mL, and water occupies 3 × 150 = 450 mL. The volumes add to 750 mL, and 300:450 simplifies to 2:3.
A common error is calculating 2/3 of 750 mL. The number three counts water parts, not all parts. Concentrate forms 2/5 of the whole. Ask the student to label the ratio before calculating. As a follow-up, keep the total at 750 mL and change the ratio to 1:4. The concentrate becomes 150 mL. Explain why the original answer cannot stay unchanged when the comparison changes.
Example 5: recover the original percentage base
An item costs $72 after a 20% discount. The final price represents 80% of the original, so 0.8 × original price = 72. Dividing gives an original price of $90. Check forward: 20% of $90 is $18, and $90 − $18 = $72. Adding 20% of $72 gives $86.40 because that calculation uses the wrong base.
Compare that problem with a percentage changing from 25% to 35%. The arithmetic difference is ten percentage points. Relative to the starting 25%, the increase is 10/25 × 100% = 40%. State which comparison is intended. The terms “percentage” and “percentage point” are not interchangeable, even though both calculations involve the same two displayed percentages.
Example 6: calculate average speed using total time
A hypothetical walk covers 2 km in 20 minutes, followed by 1 km in 25 minutes. The total distance is 3 km and the total time is 45 minutes, or 0.75 hours. Average speed is therefore 3 ÷ 0.75 = 4 km/h. The first part has speed 6 km/h; the second has speed 2.4 km/h.
The ordinary mean of those two speeds is 4.2 km/h, which is not the journey’s average speed. The walker spent different amounts of time at the two speeds. Returning to total distance divided by total time avoids that mistake. If a ten-minute stop is added and the question includes it in the journey time, the denominator changes to 55 minutes. Explain the time boundary before recalculating.
Example 7: connect a graph to its rule
For y = 3x + 2, substituting x = 0, 1 and 3 gives the ordered pairs (0, 2), (1, 5) and (3, 11). Plot each pair using the horizontal value first and the vertical value second. Between the last two points, the vertical change is 11 − 5 = 6 and the horizontal change is 3 − 1 = 2. The gradient is 6 ÷ 2 = 3.
The y-intercept is 2 because the graph reaches the vertical axis when x = 0. A student who plots (5, 1) instead of (1, 5) has changed the ordered pair; this is a vocabulary and representation error, not merely untidy drawing. Ask what happens when x increases by one. The rule and the gradient both show that y increases by three.
Example 8: separate area from perimeter
Begin with a rectangle 8 cm wide and 6 cm high. Remove a rectangle 3 cm wide and 2 cm high from its top-right corner, leaving an L-shape. The remaining area is 8 × 6 − 3 × 2 = 42 cm². The calculation subtracts the missing surface from the original surface.
To find perimeter, trace the remaining boundary: bottom 8 cm, right side 4 cm, inward horizontal edge 3 cm, inward vertical edge 2 cm, upper edge 5 cm and left side 6 cm. Their total is 28 cm. The area decreases, but in this particular corner-cut arrangement the perimeter equals the original rectangle’s perimeter. This result cannot be assumed for every cut-out. The shape and position of the removed part matter.
Example 9: use data as evidence
In an invented class survey, 12 students choose one activity and 18 choose another. The difference is six students, and 18 is 50% greater than 12. If a bar graph begins its vertical axis at 10, the displayed bar lengths above that starting point may look like two units and eight units. A quick visual impression could exaggerate the comparison.
Explain the actual values and the axis starting point instead of saying only that the graph “looks wrong.” If these are the only 30 responses, the first category occupies 12/30 of a pie chart, giving a sector angle of 12/30 × 360° = 144°. The percentage and sector calculations depend on the stated total. If more categories are added, that total must be updated.
CHAPTER 5 OF 9 · Back to contents
5. Learn a word until you can use it independently
A word is becoming useful when the student can retrieve it and use it to make a decision. Copying a definition neatly is a starting activity, but it does not show whether the student can recognise the term in a new problem. Use a short teaching sequence that ends with independent work.
- Name it. Read the term and explain it in plain language. For a coefficient, say “the numerical factor multiplying the variable part.” Point to −4 in −4x.
- Show it. Give a correct example. Write −4x as −4 × x so that the numerical factor is visible.
- Fence the meaning. Compare a near-miss. In −4x + 7, the constant term is 7, not −4. Explain what each part does.
- Transfer it. Change the expression to 5 − 2y and ask for the coefficient of y without showing the previous example.
- Return to it. On another day, use the term inside a mixed question. Record whether the student can proceed without a prompt.
This is a practical use of the Fencing Method: keep the first example within a clear boundary, then add one new difficulty. A student learning substitution might begin with positive integers, then use zero, then a negative value, and later a fraction. Increasing every difficulty at once makes it hard to identify what caused the error.
Use a small vocabulary notebook with four fields: term, example, mistaken idea and repaired explanation. For “average speed,” the mistaken idea might be “add the two speeds and divide by two.” The repair should state “total distance divided by total time” and include a complete numerical example. A record of the actual confusion is more useful than another decorative heading.
Multilingual families can discuss the concept in the language that makes it clearest, then return to the English term used in school Mathematics. Ask the child to recognise and use that exact term in a question. The goal is accurate mathematical communication; a parent does not have to deliver a formal English lecture to support a useful conversation.
CHAPTER 6 OF 9 · Back to contents
6. Choose a repair, maintain or progress route
Repair: rebuild the first unstable connection
Choose this route when schoolwork repeatedly stops at the same word or operation. Begin with five connected terms, such as factor, multiple, prime number, HCF and LCM. Use small numbers, physical groupings or a simple sketch. Ask the child to explain one contrast accurately before expanding the set. If division facts are also uncertain, practise those alongside the vocabulary instead of treating a definition as a complete remedy.
Maintain: make understanding dependable
Choose this route when the student understands during a lesson but becomes inconsistent later. Mix a few terms from different chapters and ask which instruction each question contains. For example, place one expression to simplify beside one equation to solve. Record whether the student chooses the right action without a chapter heading as a clue. Keep the quantity manageable enough to review every error.
Progress: deepen explanation and flexibility
Choose this route when routine work is secure. Ask the student to invent an example, identify a misleading solution, or explain when a familiar shortcut fails. Can two rectangles have the same perimeter but different areas? Can a percentage rise and an equal percentage fall return a price to its starting value? These tasks deepen control while staying connected to the student’s current mathematical tools.
The routes describe a learning need, not a permanent category. A student may need repair for negative numbers, maintenance for ratios and extension for geometry during the same month. Use the work in front of you. Avoid turning one weak test or one difficult chapter into a judgement about the child’s future.
CHAPTER 7 OF 9 · Back to contents
7. Use three-pax tuition and home support purposefully
In a three-pax learning group, vocabulary work can become visible through explanation. One student solves, one checks and one asks for the reason; the roles then rotate. The tutor still checks each student independently. Agreement among three students does not establish that the answer is correct, and a confident speaker should not become the permanent substitute for everyone else’s thinking.
For example, present 3(x + 2) = 21. Ask the first student to identify the equation and solve it. Ask the second to check the solution by substitution. Ask the third to explain why 3x + 2 = 21 is a different equation. Then change the numbers and let every student work alone. This reveals whether the explanation has transferred beyond the shared discussion.
A possible lesson sequence starts with a brief recall check, moves into one carefully explained concept, and gives students guided and independent problems before an error review. The precise duration and activities should depend on readiness and the school topic. This is an illustrative teaching model, not a published promise of a particular timetable, vacancy or outcome.
Punggol families can use the same decision process at home. Choose a short, predictable study window around school and CCA commitments. If the evening is already crowded, work through two well-chosen questions and discuss them fully. A long worksheet completed with continuous prompting may reveal less independent understanding than a short task the student can explain unaided.
When enquiring about small groups tuition, bring the current topic list, a recent marked task and one question the child found difficult. Ask how the tutor distinguishes a reading problem from a concept gap, how the three students’ needs are matched, and what independent progress will be reviewed. Confirm actual subject availability, arrangements and fees directly. The useful outcome is a clear teaching response to a visible need.
CHAPTER 8 OF 9 · Back to contents
8. Follow a manageable plan and check your understanding
Use the following four-week plan as an example, adjusting the pace to the school’s current chapter. It is a review framework rather than a claim that every child should master all 100 entries in a month. Start with an honest baseline; familiar entries may need only a quick check, while one difficult concept may deserve several sessions.
- Week 1: establish meanings. Select the current chapter’s ten terms. Explain five at a time, make examples and identify confusing pairs. Keep a note of the exact difficulty rather than simply marking a word “wrong.”
- Week 2: connect the language to working. Solve short questions containing those terms. Include a definition, a numerical calculation and one explanation task. Check signs, units and the original wording.
- Week 3: mix and revisit. Combine current vocabulary with five earlier terms. Remove chapter labels from a few practice questions so the student has to choose the action independently.
- Week 4: check transfer. Give a fresh question and ask the student to explain the method. Compare with the baseline and decide which terms need another cycle.
A short diagnostic: attempt before reading the answers
- In −6x + 11, identify the coefficient of x and the constant term.
- Give the smallest integer that is at least 4. Explain why it differs from the smallest integer more than 4.
- Simplify 2(3x + 4) − x. Do not assign a value to x.
- An example item costs $48 after a 20% discount. Find its original price.
- A rectangle measures 7 cm by 4 cm. Find its area and perimeter, with units.
- A pictogram key says one symbol represents six students. What do two and a half symbols represent?
- For y = 2x + 5, give the point on the y-axis and explain how you know.
- A student says that 12 is a factor of 3 because 12 = 3 × 4. Repair the sentence.
Answers and what each question checks
- −6 and 11. The negative sign belongs to the coefficient. If the student answers 6, revisit signed terms before adding harder algebra.
- 4, compared with 5. “At least” includes the boundary; “more than” excludes it. For this question, the answers must also be integers.
- 5x + 8. Expansion gives 6x + 8 − x. Combining the like terms produces 5x + 8; no equation was supplied to solve.
- $60. The final amount is 80% of the original, so 48 ÷ 0.8 = 60. A forward check gives a discount of $12.
- 28 cm² and 22 cm. Multiplication gives the surface measure; adding all four sides gives the boundary length. The units distinguish them.
- 15 students. Calculate 2.5 × 6. The key describes the value of each whole symbol; a half-symbol represents three students.
- (0, 5). A point on the y-axis has x = 0. Substitution gives y = 5, so the y-intercept is 5.
- 12 is a multiple of 3; 3 is a factor of 12. The multiplication is correct, but the relationship was named in the wrong direction.
Do not turn this diagnostic into an unofficial grade threshold. Use the pattern of errors. If the child gets the numerical answers right but cannot explain two of them, practise those explanations. If the definitions are correct but the calculations fail, inspect the prerequisite operations. If everything works only with prompts, repeat a smaller set later without those prompts.
A simple progress record can use three descriptions: “I recognise it,” “I can use it with help,” and “I can use it independently.” Add the date and one example. Movement between these descriptions is more informative than counting how many times a definition has been copied. It also gives a tutor or teacher a concrete starting point for a discussion.
CHAPTER 9 OF 9 · Back to contents
9. Questions parents and students ask
Should my child memorise all 100 terms before school starts?
No. Begin with familiar foundations and the first school topic. A useful target is to understand a small connected set well enough to use it. Return to the list as new chapters appear. Memorising the entire page without solving problems can create recognition without usable understanding.
Are these official SEAB vocabulary requirements?
No. This is an independently selected teaching list. The official curriculum document and the student’s school materials guide the subject content. The word “Top” describes the practical selection made for this guide; it is not an official ranking, a compulsory list or a promise of what an assessment will test.
Does weak mathematical vocabulary mean my child should change subject level?
A vocabulary difficulty alone does not answer that question. Identify whether the child understands the underlying concept, can use it independently and can cope with the wider subject demands. Discuss persistent difficulties and possible support with the school. One list, tuition lesson or test cannot make a complete subject-level decision.
Can a strong student benefit from this list?
Yes, if the task becomes more demanding than recalling definitions. Ask for a counterexample, a precise explanation, a comparison of two methods or a correction to a flawed solution. A student who knows the formula for area can still deepen understanding by explaining why a change in perimeter does not determine one unique change in area.
What if I cannot teach secondary Mathematics myself?
Ask the child to show the example and explain one step. You can ask “What does this word mean here?”, “Which amount is the whole?” or “How could you check that?” without supplying the solution. When the explanation is unclear, note the exact question for the teacher or tutor. Calm, specific questions are already useful support.
What should we do when a term stays confusing?
Reduce the example until the relationship is visible. Use small whole numbers before fractions, a labelled sketch before a complex diagram, or a single operation before several brackets. Compare one correct example with one near-miss. If uncertainty persists, bring both attempts to the teacher or tutor so the next explanation can address the actual gap.
Where should families check the official information?
Curriculum and examination context checked for this guide on 16 November 2026. Follow the school’s current topic and assessment information for the child’s immediate work. These official sources explain the wider framework; the teaching definitions, invented problems and study plan above are eduKate’s own explanations.
- MOE: G2 and G3 Mathematics syllabuses, Secondary One to Four — see the G3 Secondary One content section.
- MOE: Full Subject-Based Banding infographic — subject levels and the secondary school experience.
- SEAB: Secondary Education Certificate overview — the national examination framework beginning in 2027.

