This Top 100 Secondary 1 G2 Vocabulary List for Punggol teaches English words for technology, inventions, design and problem solving. Students learn to describe how a tool works, identify a user’s need, explain a design change and judge a result using evidence. The 100 selected words each have a plain meaning and an original sentence, followed by a fictional design story, worked comprehension answers and practical writing and speaking tasks.
Choose five words connected to a real school text or an imaginary problem, then make a fresh sentence and explain why the word fits. This is an original eduKate English vocabulary resource, not an official MOE or SEAB Top 100 list, a separate G2 Design and Technology syllabus or an examination forecast. Under Full Subject-Based Banding, lower-secondary Design and Technology is part of the common curriculum; this page specifically teaches English expression.
- Understand the task: identify a problem, user, objective and constraints.
- Learn 100 words: move from devices and materials to testing and evidence.
- Read critically: distinguish a promising prototype from a proven solution.
- Write and speak: explain the reason behind a change, not just the final appearance.
- For parents: use inexpensive paper tasks and revised sentences to check learning.
Find your next learning step
1. Technology vocabulary for clearer English
Design writing has a useful pattern: someone experiences a problem; a proposal tries to address it; testing reveals what works and what needs revision. A student can explain this without advanced technical knowledge. ‘The model failed’ is vague. ‘The narrow base tipped when the sample book was placed on it’ states what was observed.
The DesignSingapore Council’s School of X describes people-centred problem solving and testing solutions. DesignSingapore’s example of student prototyping illustrates why an early idea may change through feedback. This guide uses independent fictional material to practise language. It does not reproduce those projects or give students a compulsory engineering method.
English matters at every stage: asking a question clearly can identify a problem, labelling a diagram can prevent confusion and reporting an unsuccessful test accurately can lead to better decisions. Students should learn to distinguish a design’s intended function from the results actually observed.
2. 100 words for design and problem solving
The definitions below focus on technology and design contexts. ‘Code’ here means programming instructions; in another setting it could refer to a rule or secret message. ‘Model’ can mean a simplified representation rather than a person in a photograph. Use the full sentence to interpret the word.
Words 1–10: Devices and functions
| No. | Word | Meaning | Original example |
|---|---|---|---|
| 1 | technology | tools and methods developed through practical knowledge | The class discussed how technology could help solve an everyday problem. |
| 2 | device | a piece of equipment made for a particular purpose | The fictional device displayed a reminder when the box opened. |
| 3 | application | a program or practical use of an idea | The student described one application of the new school tool. |
| 4 | system | connected parts working together for a purpose | The system included a stand, a label and a storage tray. |
| 5 | component | one part of a larger device or structure | A loose component caused the model to lean sideways. |
| 6 | function | the intended job or use of something | The main function of the stand was to hold books upright. |
| 7 | feature | an important or noticeable part of a design | An adjustable shelf was the prototype’s most useful feature. |
| 8 | interface | the part through which a user interacts with a tool | The interface used large buttons with clear labels. |
| 9 | input | information or material supplied to a process | The program accepted a number as its input. |
| 10 | output | the result or information produced by a process | The screen’s output was a short confirmation message. |
Words 11–20: Problems, users and constraints
| No. | Word | Meaning | Original example |
|---|---|---|---|
| 11 | problem | a difficulty that needs attention or a solution | The group defined the problem as books sliding off a narrow desk. |
| 12 | user | a person who uses a product, service or system | They asked the user what made the existing stand difficult. |
| 13 | need | something required for a particular purpose | The design needed to serve the reader’s actual task. |
| 14 | context | the surrounding circumstances of an action or problem | The crowded desk gave context for the narrow design. |
| 15 | constraint | a limit that restricts available choices | The team faced a constraint on the amount of cardboard. |
| 16 | requirement | something a design must do or include | The brief stated a requirement for the stand to support one book. |
| 17 | objective | a particular goal to be reached | Their objective was to make the instructions easier to follow. |
| 18 | criterion | a standard used to judge a result | Stability was one criterion in the proposed comparison. |
| 19 | limitation | a weakness or boundary that restricts a result | The paper model had a limitation when the book was heavy. |
| 20 | priority | a concern given greater importance | The group made clarity a priority over decoration. |
Words 21–30: Research and original ideas
| No. | Word | Meaning | Original example |
|---|---|---|---|
| 21 | brainstorm | to generate possible ideas before selecting one | The group began to brainstorm ways to keep pages open. |
| 22 | concept | a general idea behind a plan or design | The concept used a folded support instead of a separate base. |
| 23 | solution | a way of dealing with a problem | One possible solution was a removable cardboard divider. |
| 24 | alternative | a different available option | The team considered an alternative without the pointed corners. |
| 25 | innovation | a new or improved way of doing something | Their innovation was a simpler method of adjusting the support. |
| 26 | invention | a new device or process created to meet a purpose | The story described an imaginary invention for sorting notes. |
| 27 | originality | the quality of being fresh or independently created | The group valued originality but still checked whether the idea worked. |
| 28 | research | careful investigation to learn about a subject | Their research began with observing where books usually slipped. |
| 29 | observe | to notice details through careful attention | The students observed that the first design leaned to the left. |
| 30 | question | to ask about an idea or issue needing clarification | They decided to question whether the stand needed a taller back. |
Words 31–40: Designs, models and revisions
| No. | Word | Meaning | Original example |
|---|---|---|---|
| 31 | sketch | a quick drawing used to explore an idea | The sketch showed the proposed support from the side. |
| 32 | diagram | a drawing that explains structure or relationships | The diagram labelled the folded base and the back panel. |
| 33 | blueprint | a detailed plan for making or building something | Their simplified blueprint included measurements for the model. |
| 34 | model | a representation used to explain or explore a design | A cardboard model helped them discuss the shape. |
| 35 | prototype | an early version built to test an idea | The prototype tipped over during the first classroom trial. |
| 36 | mock-up | a simple representation of how something may look or work | The paper mock-up let users try the button layout. |
| 37 | version | one form of something that may change over time | The second version had a wider base. |
| 38 | iteration | one repeated cycle of making and improving something | Each iteration changed only one feature before testing again. |
| 39 | revise | to change something in order to improve it | They decided to revise the diagram after noticing an unclear arrow. |
| 40 | refine | to improve a design through careful adjustments | The group refined the shape without changing its main purpose. |
Words 41–50: Tests, measurements and feedback
| No. | Word | Meaning | Original example |
|---|---|---|---|
| 41 | test | to check how something performs under stated conditions | The group planned to test the stand with the same sample book. |
| 42 | trial | an occasion when something is tried or examined | The first trial revealed that the narrow base slipped. |
| 43 | sample | a selected item used for examination or comparison | One sample book was used for both designs. |
| 44 | measurement | a number showing size, length or another quantity | The measurement of the base was recorded in centimetres. |
| 45 | accuracy | the quality of being correct or close to the intended value | The instructions required accuracy when recording the length. |
| 46 | reliability | how consistently something works or gives dependable results | The group checked reliability by repeating the same test. |
| 47 | defect | a fault that makes something work poorly | A torn fold was a defect in the cardboard prototype. |
| 48 | error | a mistake in an action, record or result | An error in the written measurement confused the comparison. |
| 49 | feedback | information about how something worked or could improve | Feedback showed that the label was too small to read easily. |
| 50 | adjustment | a change made in response to new information | Widening the base was an adjustment based on the first trial. |
Words 51–60: Instructions and explanation
| No. | Word | Meaning | Original example |
|---|---|---|---|
| 51 | step | one individual action in a sequence | The instructions began with a step that the students could perform safely. |
| 52 | sequence | the order in which actions or events occur | A clear sequence made the assembly easier to follow. |
| 53 | process | a series of actions leading towards a result | The design process included identifying the need and checking a prototype. |
| 54 | procedure | a stated method for carrying out a task | The group followed the same procedure for both comparisons. |
| 55 | instruction | information telling someone what to do | The instruction did not explain which side should face upward. |
| 56 | label | words or symbols identifying a part or feature | A larger label helped users find the release tab. |
| 57 | explanation | a statement showing how or why something works | The explanation connected the wider base to greater stability. |
| 58 | demonstration | a practical showing of how a task is done | The demonstration revealed a step that the diagram had missed. |
| 59 | compare | to identify meaningful similarities and differences | Compare both models under the same stated conditions. |
| 60 | justify | to support a choice with reasons and evidence | They justified the change by referring to the recorded observations. |
Words 61–70: Materials and physical properties
| No. | Word | Meaning | Original example |
|---|---|---|---|
| 61 | durable | able to remain useful despite wear or use | The class wondered whether the temporary material was durable enough. |
| 62 | flexible | able to bend or adapt without breaking easily | The flexible strip folded without cracking in the practice model. |
| 63 | rigid | stiff and not easily bent | A rigid backing helped the model keep its shape. |
| 64 | lightweight | having relatively little weight | The lightweight stand could be moved around the classroom. |
| 65 | sturdy | strong and not likely to break or fall over | The wider base made the trial model appear sturdier. |
| 66 | texture | the feel or surface quality of a material | A rough texture made the cardboard easier to grip. |
| 67 | surface | the outside or upper area of an object | The book rested against a flat surface. |
| 68 | material | a substance from which something is made | The group selected a material already available in class. |
| 69 | joint | a place where two parts are connected | The joint weakened after repeated folding. |
| 70 | fastener | an object used to hold parts together | A reusable fastener connected the removable panels. |
Words 71–80: Digital tools and information
| No. | Word | Meaning | Original example |
|---|---|---|---|
| 71 | data | recorded information used for understanding or decision-making | The table stored data from the three separate trials. |
| 72 | algorithm | a set of ordered steps for completing a task | The fictional algorithm sorted book titles alphabetically. |
| 73 | code | instructions written in a programming language | The student checked which part of the code displayed the message. |
| 74 | sensor | a device that detects changes in a physical condition | A sensor was discussed as a possible but unnecessary addition. |
| 75 | signal | information communicated through a sound, light or other sign | The signal indicated that the timer had finished. |
| 76 | network | connected devices or people that exchange information | The example showed how a network could share an updated notice. |
| 77 | digital | using information represented in electronic form | The digital diagram could be enlarged without redrawing it. |
| 78 | automatic | working with little direct action once started | The automatic reminder appeared after the selected time. |
| 79 | manual | operated by hand or direct human action | The manual switch offered another way to control the model. |
| 80 | privacy | protection of personal information from unwanted access | The group removed names from the practice data to respect privacy. |
Words 81–90: Inclusive and responsible design
| No. | Word | Meaning | Original example |
|---|---|---|---|
| 81 | accessibility | how readily different people can use a place or product | The design discussion considered accessibility rather than appearance alone. |
| 82 | inclusive | designed to allow different people to participate meaningfully | An inclusive explanation did not assume that everyone could read tiny text. |
| 83 | usability | how easy and effective something is to use | The team checked usability by asking whether the label was clear. |
| 84 | convenient | suitable or easy in a particular situation | A convenient location for one user may not suit everyone. |
| 85 | safety | the condition of reducing unacceptable risks of harm | Safety was considered before testing any physical model. |
| 86 | risk | the possibility of harm or an unwanted outcome | The group described the risk of a sharp edge on the prototype. |
| 87 | ethics | ideas about what is right or responsible behaviour | Their ethics discussion included asking permission before using someone’s work. |
| 88 | sustainability | using resources with attention to future effects | They considered sustainability when deciding whether to reuse materials. |
| 89 | resource | something available for a task, such as time or materials | Cardboard was the main resource available for the activity. |
| 90 | disposal | the act of getting rid of something | The plan included suitable disposal of damaged materials after the task. |
Words 91–100: Evaluating and improving solutions
| No. | Word | Meaning | Original example |
|---|---|---|---|
| 91 | evidence | information that supports or challenges a claim | The stability test supplied evidence for changing the base. |
| 92 | result | what happens or is produced by an activity | The result was written down before the students discussed reasons. |
| 93 | trade-off | a choice in which one benefit comes with a disadvantage | A wider base created a trade-off with limited desk space. |
| 94 | efficient | achieving a result without unnecessary time or resources | The more efficient method used fewer repeated steps. |
| 95 | effective | successful in producing the intended outcome | The design was effective for the stated sample book in the trial. |
| 96 | adaptable | able to change when needs or circumstances change | The adjustable support made the model more adaptable. |
| 97 | feasible | possible to carry out with the resources available | The complicated sensor idea was not feasible for the paper exercise. |
| 98 | evaluate | to judge using clear criteria and information | The learners evaluated the two models rather than choosing by colour. |
| 99 | recommendation | a suggested action supported by reasons | Their recommendation was to try a wider base in the next version. |
| 100 | conclusion | a final statement based on the available information | The conclusion acknowledged that more testing was still needed. |
3. Words that should not be confused
Need and preference: a user may need to read an instruction clearly but prefer a particular colour. A design brief should explain which features are essential and which are optional. A preference can still be important, but it does not automatically become a safety requirement.
Prototype and final product: a prototype is an early version built to learn from. A successful trial with one book does not establish that a stand supports every book. Describe the sample used, the result and the limitation. Do not call a design ‘proved safe’ based on a single classroom observation.
Accuracy and reliability: accuracy concerns correctness; reliability concerns consistency across use or trials. A scale can give the same wrong measurement repeatedly, illustrating why the concepts are not identical.
Efficient and effective: something can save time yet fail its purpose. A faster procedure is efficient in one sense, but if the reader cannot understand the instructions, it is not effective. Name the target before evaluating either word.
Innovation does not mean complicated: adding a screen or sensor can make a design harder to use. An improvement may simply be a larger label. A useful explanation shows how the change addresses a particular problem rather than assuming more features are always better.
4. Reading: The stand that would not stand
Original fictional passage — The Stand That Would Not Stand. The characters, measurements and tests below belong only to an English exercise. They are not engineering specifications or advice for constructing a load-bearing product.
For a classroom design discussion, Jia, Omar and Beth were asked to explain how an ordinary book could be held upright on a crowded desk. The fictional brief identified one sample book and a limited amount of cardboard. The students were not building a product for sale.
Jia drew a narrow triangular stand. It looked neat and required less material than Omar’s wider proposal. Beth wrote down the chosen criteria: the stand should hold the sample book upright during a supervised trial, fit within the marked desk space and have instructions that another student could follow.
Their first model took only a few minutes to assemble. However, when the sample book was placed against it, the base tipped towards the right. Omar suggested that the problem was simply poor workmanship. Beth asked them not to decide on a cause before checking how the base had been folded.
They compared the sketch with the model and found that one fold was uneven. After adjusting it, they repeated the same trial. The stand remained upright for a moment, but it still leaned when the book was opened. This second result showed that fixing the fold had not removed the problem.
The students tried a wider base in a revised prototype. Under the same stated trial, it held the sample book in the intended position. Jia wanted to write, ‘Our invention works perfectly.’ Beth changed the sentence to, ‘Our second prototype supported the sample book during this trial.’ She added that it took up more desk space, a trade-off that the group still needed to consider.
When another classmate tried to assemble the revised version, he folded the back panel in the wrong direction because the diagram used two arrows without labels. The group enlarged the labels and asked him to follow the new instructions. He completed the sequence with fewer questions.
In their final explanation, the students presented three stages rather than only the neatest picture: the original idea, the observations from two trials and the changes made to the base and diagram. They recommended more testing with different books before making any broader claim.
5. Reading comprehension with worked answers
- What problem was the team trying to solve? The brief called for holding one sample book upright on a crowded desk using limited cardboard. This is more precise than saying ‘they wanted to make technology’.
- Which criteria were stated? Support the sample book under a supervised trial, fit the marked space and provide understandable instructions. These criteria give a basis for comparison.
- What did the first trial show? The narrow stand tipped towards the right. That was the observed result; the cause was not established at that moment.
- Was Omar justified in blaming workmanship immediately? No. The uneven fold was found, but the second trial still showed a leaning problem. The text supports investigation rather than a confident first guess.
- What did the wider base improve? It held the sample book in the intended position in the stated trial. The result is limited to that sample and condition.
- What trade-off remained? The wider base used more desk space. A change can improve one criterion while creating a cost under another.
- Why did the diagram require revision? Another student misinterpreted unlabelled arrows and folded the panel in the wrong direction. The enlarged labels made the procedure easier to follow.
- Why was ‘works perfectly’ an unsound conclusion? Only a few controlled trials were described. The team had not tested all books, situations or repeated use. The narrower claim better represents the evidence.
6. Write a test report and recommendation
Task: Write a short report with the objective, first result, revision, improved result and one remaining limitation. Avoid unsupported claims of absolute safety or success.
Model response: ‘Our objective was to hold the sample book upright using a cardboard stand that fitted the marked desk area. The original narrow design tipped during the first trial. We corrected an uneven fold, but the stand still leaned when the book was opened. A second prototype with a wider base held the sample book during the repeated trial. However, its larger footprint reduced available desk space, and we need further tests before recommending broader use.’
Why it works: the report separates what was changed from what was observed. It includes a limitation and uses the condition ‘during the repeated trial’. A clear report is often more useful than several impressive adjectives about innovation.
7. Discuss useful designs and missing evidence
Speaking prompt: Would you choose an attractive design with small labels or a plain design with instructions that are easier to read? Explain the purpose, users and possible exceptions.
Possible response: ‘If the main purpose is to help different learners follow an instruction, I would prefer the clearer labels. In the story, an unlabelled diagram caused a mistake during assembly. Appearance can matter, but I would first test whether readers understand the information. I cannot claim that one choice suits every user without asking about their needs.’
Follow up: ‘What if both options are easy to use?’ Then a preference about appearance or materials may reasonably influence the choice. The key learning skill is to update the explanation when the facts change.
8. Ten practice questions with explanations
- Choose the right term: an early version built to test an idea is a prototype or a finished guarantee?
- Complete: ‘The group decided to _____ the model under the same conditions.’
- Correct: ‘The second models was more stable.’
- Explain the difference between a user’s need and a designer’s preference.
- Why does one successful trial not prove that a tool always works?
- Use ‘trade-off’ in a sentence about the wider stand.
- Which word names an ordered set of instructions for a computer: algorithm or texture?
- Rewrite ‘This idea is perfect’ using a stated test result.
- Give one example of a design feature supporting accessibility.
- Explain what evidence would help the group make a stronger recommendation.
Worked answer key
- Prototype. It is an early testable version, not proof of a finished result.
- Test. Repeating a test under comparable conditions can help distinguish changes from other influences.
- ‘The second model was more stable.’ A singular subject takes was, and the noun does not need a plural ending.
- A need describes a requirement for the purpose; a preference is a favoured option. Both can matter, but they need not carry equal weight.
- The trial covers only the tested situation. Other books and repeated use may produce different results.
- Possible answer: ‘The wider base improved stability in the trial, but the trade-off was less free desk space.’
- Algorithm. Texture concerns how a surface feels; an algorithm describes ordered steps for a task.
- Possible answer: ‘In the described trial, the revised base supported the sample book.’ This stays within the evidence.
- Possible answer: clear large labels or controls that can be understood by different users. Actual accessibility needs should be checked with users rather than assumed.
- Repeated trials with different suitable samples and clear criteria. The conclusion should remain limited to the resulting evidence.
9. Home practice with ordinary objects
No specialist tools are necessary to practise this English. Choose an everyday object such as a pencil case, bookmark or paper folder. Ask the learner to describe its function, one useful feature and a limitation. The task is writing and explanation, not performing an unsafe experiment or changing household equipment.
First session: select five words including function, user, criterion, feedback and evidence. Next session: compare two fictional designs with the same purpose. Later: write a 70-word report about a stated test and check whether the claims go beyond it. Change the example and ask for an independent answer to check transfer.
If meanings are not secure, contrast a model with a prototype and a need with a preference. If students understand the vocabulary but write vague explanations, use a sentence pattern: ‘We changed ___ because ___; in the next test, ___’. If they already reason well, add a new constraint and ask whether the recommendation still holds.
10. A small-group English teaching illustration
In a hypothetical three-student English class, one student reads the design brief, another checks the reported results and a third rewrites unsupported claims. They rotate roles, then each produces a short independent report about a different fictional model. The tutor checks vocabulary accuracy, sequence, evidence and qualifiers separately.
This illustrates one possible teaching method, not a current timetable or guarantee. A learner who says ‘efficient’ when they mean ‘effective’ needs a contrast task; another may need help writing a coherent process; a third may need to explain why an appealing diagram can still confuse a reader.
11. Common questions and useful sources
Are the 100 words an official technology syllabus?
No. They are selected for English practice. Under Full SBB, lower-secondary Design and Technology is generally a common curriculum subject, not a separately ranked G2 word list. The school sets the relevant practical activities and assessments.
Must students build a physical invention to practise?
No. Fictional descriptions, labelled drawings and supplied test results allow students to practise reading and writing. Adults should supervise any real practical activity appropriately.
Should a student describe an untested design as safe?
No. The student should identify what was tested, under what conditions, and what remains unknown. Safety claims need suitable evidence and relevant expert guidance.
What matters more: difficult vocabulary or clear explanation?
Use vocabulary that accurately communicates the reason and result. A simple, well-supported sentence is better than an unsupported claim containing several complex words.
Public background: DesignSingapore School of X, DesignSingapore student prototyping story, and MOE programme information. The vocabulary bank and classroom case study are original teaching material.
For targeted Secondary 1 English support, see eduKatePunggol’s learning guide and the starting-position discussion.

